/*
* tty.c - code for handling serial ports in pppd.
*
- * Copyright (C) 2000 Paul Mackerras.
- * All rights reserved.
+ * Copyright (C) 2000-2002 Paul Mackerras. All rights reserved.
*
- * Portions Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
*
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. The name(s) of the authors of this software must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission.
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by Paul Mackerras
+ * <paulus@samba.org>".
+ *
+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Portions derived from main.c, which is:
+ *
+ * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. The name "Carnegie Mellon University" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For permission or any legal
+ * details, please contact
+ * Office of Technology Transfer
+ * Carnegie Mellon University
+ * 5000 Forbes Avenue
+ * Pittsburgh, PA 15213-3890
+ * (412) 268-4387, fax: (412) 268-7395
+ * tech-transfer@andrew.cmu.edu
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by Computing Services
+ * at Carnegie Mellon University (http://www.cmu.edu/computing/)."
+ *
+ * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
+ * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#define RCSID "$Id: tty.c,v 1.4 2001/02/22 03:15:21 paulus Exp $"
+#define RCSID "$Id: tty.c,v 1.13 2004/01/13 04:17:59 paulus Exp $"
#include <stdio.h>
#include <ctype.h>
#include "fsm.h"
#include "lcp.h"
+void tty_process_extra_options __P((void));
+void tty_check_options __P((void));
+int connect_tty __P((void));
+void disconnect_tty __P((void));
+void tty_close_fds __P((void));
+void cleanup_tty __P((void));
+void tty_do_send_config __P((int, u_int32_t, int, int));
+
static int setdevname __P((char *, char **, int));
static int setspeed __P((char *, char **, int));
static int setxonxoff __P((char **));
+static int setescape __P((char **));
+static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
static void finish_tty __P((void));
static int start_charshunt __P((int, int));
static void stop_charshunt __P((void *, int));
static int pty_slave; /* fd for slave side of pty */
static int real_ttyfd; /* fd for actual serial port (not pty) */
static int ttyfd; /* Serial port file descriptor */
+static char speed_str[16]; /* Serial port speed as string */
mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */
int baud_rate; /* Actual bits/second for serial device */
/* XXX */
extern int privopen; /* don't lock, open device as root */
+u_int32_t xmit_accm[8]; /* extended transmit ACCM */
+
/* option descriptors */
option_t tty_options[] = {
/* device name must be first, or change connect_tty() below! */
{ "device name", o_wild, (void *) &setdevname,
- "Serial port device name", OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG },
+ "Serial port device name",
+ OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC,
+ devnam},
+
{ "tty speed", o_wild, (void *) &setspeed,
- "Baud rate for serial port", OPT_NOARG },
+ "Baud rate for serial port",
+ OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
+
{ "lock", o_bool, &lockflag,
- "Lock serial device with UUCP-style lock file", 1 },
+ "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
{ "nolock", o_bool, &lockflag,
- "Don't lock serial device", OPT_PRIV },
+ "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
+
{ "init", o_string, &initializer,
- "A program to initialize the device", OPT_PRIVFIX },
+ "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
+
{ "connect", o_string, &connect_script,
- "A program to set up a connection", OPT_PRIVFIX },
+ "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
+
{ "disconnect", o_string, &disconnect_script,
- "Program to disconnect serial device", OPT_PRIVFIX },
+ "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
+
{ "welcome", o_string, &welcomer,
- "Script to welcome client", OPT_PRIVFIX },
+ "Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
+
{ "pty", o_string, &ptycommand,
- "Script to run on pseudo-tty master side", OPT_PRIVFIX | OPT_DEVNAM },
+ "Script to run on pseudo-tty master side",
+ OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
+
{ "notty", o_bool, ¬ty,
"Input/output is not a tty", OPT_DEVNAM | 1 },
+
{ "socket", o_string, &pty_socket,
- "Send and receive over socket, arg is host:port", OPT_DEVNAM },
+ "Send and receive over socket, arg is host:port",
+ OPT_PRIO | OPT_DEVNAM },
+
{ "record", o_string, &record_file,
- "Record characters sent/received to file" },
+ "Record characters sent/received to file", OPT_PRIO },
+
{ "crtscts", o_int, &crtscts,
- "Set hardware (RTS/CTS) flow control", OPT_NOARG|OPT_VAL(1) },
+ "Set hardware (RTS/CTS) flow control",
+ OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
+ { "cdtrcts", o_int, &crtscts,
+ "Set alternate hardware (DTR/CTS) flow control",
+ OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
{ "nocrtscts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
{ "-crtscts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
- { "cdtrcts", o_int, &crtscts,
- "Set alternate hardware (DTR/CTS) flow control", OPT_NOARG|OPT_VAL(2) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "nocdtrcts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "xonxoff", o_special_noarg, (void *)setxonxoff,
- "Set software (XON/XOFF) flow control" },
+ "Set software (XON/XOFF) flow control", OPT_PRIOSUB },
+
{ "modem", o_bool, &modem,
- "Use modem control lines", 1 },
+ "Use modem control lines", OPT_PRIO | 1 },
{ "local", o_bool, &modem,
- "Don't use modem control lines" },
+ "Don't use modem control lines", OPT_PRIOSUB | 0 },
+
{ "sync", o_bool, &sync_serial,
"Use synchronous HDLC serial encoding", 1 },
+
{ "datarate", o_int, &max_data_rate,
- "Maximum data rate in bytes/sec (with pty, notty or record option)" },
+ "Maximum data rate in bytes/sec (with pty, notty or record option)",
+ OPT_PRIO },
+
+ { "escape", o_special, (void *)setescape,
+ "List of character codes to escape on transmission",
+ OPT_A2PRINTER, (void *)printescape },
+
{ NULL }
};
+struct channel tty_channel = {
+ tty_options,
+ &tty_process_extra_options,
+ &tty_check_options,
+ &connect_tty,
+ &disconnect_tty,
+ &tty_establish_ppp,
+ &tty_disestablish_ppp,
+ &tty_do_send_config,
+ &tty_recv_config,
+ &cleanup_tty,
+ &tty_close_fds
+};
+
/*
* setspeed - Set the serial port baud rate.
* If doit is 0, the call is to check whether this option is
spd = strtol(arg, &ptr, 0);
if (ptr == arg || *ptr != 0 || spd == 0)
return 0;
- if (doit)
+ if (doit) {
inspeed = spd;
+ slprintf(speed_str, sizeof(speed_str), "%d", spd);
+ }
return 1;
}
return 1;
}
+/*
+ * setescape - add chars to the set we escape on transmission.
+ */
+static int
+setescape(argv)
+ char **argv;
+{
+ int n, ret;
+ char *p, *endp;
+
+ p = *argv;
+ ret = 1;
+ while (*p) {
+ n = strtol(p, &endp, 16);
+ if (p == endp) {
+ option_error("escape parameter contains invalid hex number '%s'",
+ p);
+ return 0;
+ }
+ p = endp;
+ if (n < 0 || n == 0x5E || n > 0xFF) {
+ option_error("can't escape character 0x%x", n);
+ ret = 0;
+ } else
+ xmit_accm[n >> 5] |= 1 << (n & 0x1F);
+ while (*p == ',' || *p == ' ')
+ ++p;
+ }
+ lcp_allowoptions[0].asyncmap = xmit_accm[0];
+ return ret;
+}
+
+static void
+printescape(opt, printer, arg)
+ option_t *opt;
+ void (*printer) __P((void *, char *, ...));
+ void *arg;
+{
+ int n;
+ int first = 1;
+
+ for (n = 0; n < 256; ++n) {
+ if (n == 0x7d)
+ n += 2; /* skip 7d, 7e */
+ if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
+ if (!first)
+ printer(arg, ",");
+ else
+ first = 0;
+ printer(arg, "%x", n);
+ }
+ }
+ if (first)
+ printer(arg, "oops # nothing escaped");
+}
+
/*
* tty_init - do various tty-related initializations.
*/
void tty_init()
{
add_notifier(&pidchange, maybe_relock, 0);
- add_options(tty_options);
+ the_channel = &tty_channel;
+ xmit_accm[3] = 0x60000000;
}
/*
- * tty_device_check - work out which tty device we are using
+ * tty_process_extra_options - work out which tty device we are using
* and read its options file.
*/
-void tty_device_check()
+void tty_process_extra_options()
{
using_pty = notty || ptycommand != NULL || pty_socket != NULL;
if (using_pty)
|| fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
warn("Couldn't reset non-blocking mode on device: %m");
+#ifndef __linux__
+ /*
+ * Linux 2.4 and above blocks normal writes to the tty
+ * when it is in PPP line discipline, so this isn't needed.
+ */
/*
* Do the equivalent of `mesg n' to stop broadcast messages.
*/
warn("Couldn't restrict write permissions to %s: %m", devnam);
} else
tty_mode = statbuf.st_mode;
+#endif /* __linux__ */
/*
* Set line speed, flow control, etc.
if (pipe(ipipe) < 0 || pipe(opipe) < 0)
fatal("Couldn't create pipes for record option: %m");
+
+ /* don't leak these to the ptycommand */
+ (void) fcntl(ipipe[0], F_SETFD, FD_CLOEXEC);
+ (void) fcntl(opipe[1], F_SETFD, FD_CLOEXEC);
+
ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
&& start_charshunt(ipipe[0], opipe[1]);
close(ipipe[0]);
}
}
+/*
+ * tty_do_send_config - set transmit-side PPP configuration.
+ * We set the extended transmit ACCM here as well.
+ */
+void
+tty_do_send_config(mtu, accm, pcomp, accomp)
+ int mtu;
+ u_int32_t accm;
+ int pcomp, accomp;
+{
+ tty_set_xaccm(xmit_accm);
+ tty_send_config(mtu, accm, pcomp, accomp);
+}
+
/*
* finish_tty - restore the terminal device to its original settings
*/
restore_tty(real_ttyfd);
+#ifndef __linux__
if (tty_mode != (mode_t) -1) {
if (fchmod(real_ttyfd, tty_mode) != 0) {
/* XXX if devnam is a symlink, this will change the link */
chmod(devnam, tty_mode);
}
}
+#endif /* __linux__ */
close(real_ttyfd);
real_ttyfd = -1;
{
int cpid;
- cpid = fork();
+ cpid = safe_fork();
if (cpid == -1) {
error("Can't fork process for character shunt: %m");
return 0;
signal(SIGXFSZ, SIG_DFL);
#endif
+ /*
+ * Check that the fds won't overrun the fd_sets
+ */
+ if (ifd >= FD_SETSIZE || ofd >= FD_SETSIZE || pty_master >= FD_SETSIZE)
+ fatal("internal error: file descriptor too large (%d, %d, %d)",
+ ifd, ofd, pty_master);
+
/*
* Open the record file if required.
*/
projects / ppp.git / blobdiff