* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#define RCSID "$Id: tty.c,v 1.3 2000/07/24 14:58:15 paulus Exp $"
+#define RCSID "$Id: tty.c,v 1.6 2001/03/12 22:59:01 paulus Exp $"
#include <stdio.h>
#include <ctype.h>
#include "fsm.h"
#include "lcp.h"
+void tty_process_extra_options __P((void));
+void tty_check_options __P((void));
+int connect_tty __P((void));
+void disconnect_tty __P((void));
+void tty_close_fds __P((void));
+void cleanup_tty __P((void));
+void tty_do_send_config __P((int, u_int32_t, int, int));
+
+static int setdevname __P((char *, char **, int));
+static int setspeed __P((char *, char **, int));
static int setxonxoff __P((char **));
+static int setescape __P((char **));
+static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
static void finish_tty __P((void));
static int start_charshunt __P((int, int));
static void stop_charshunt __P((void *, int));
static int pty_slave; /* fd for slave side of pty */
static int real_ttyfd; /* fd for actual serial port (not pty) */
static int ttyfd; /* Serial port file descriptor */
+static char speed_str[16]; /* Serial port speed as string */
mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */
int baud_rate; /* Actual bits/second for serial device */
/* XXX */
extern int privopen; /* don't lock, open device as root */
+u_int32_t xmit_accm[8]; /* extended transmit ACCM */
+
/* option descriptors */
option_t tty_options[] = {
+ /* device name must be first, or change connect_tty() below! */
+ { "device name", o_wild, (void *) &setdevname,
+ "Serial port device name",
+ OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC,
+ devnam},
+
+ { "tty speed", o_wild, (void *) &setspeed,
+ "Baud rate for serial port",
+ OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
+
{ "lock", o_bool, &lockflag,
- "Lock serial device with UUCP-style lock file", 1 },
+ "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
{ "nolock", o_bool, &lockflag,
- "Don't lock serial device", OPT_PRIV },
+ "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
+
{ "init", o_string, &initializer,
- "A program to initialize the device",
- OPT_A2INFO | OPT_PRIVFIX, &initializer_info },
+ "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
+
{ "connect", o_string, &connect_script,
- "A program to set up a connection",
- OPT_A2INFO | OPT_PRIVFIX, &connect_script_info },
+ "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
+
{ "disconnect", o_string, &disconnect_script,
- "Program to disconnect serial device",
- OPT_A2INFO | OPT_PRIVFIX, &disconnect_script_info },
+ "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
+
{ "welcome", o_string, &welcomer,
- "Script to welcome client",
- OPT_A2INFO | OPT_PRIVFIX, &welcomer_info },
+ "Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
+
{ "pty", o_string, &ptycommand,
"Script to run on pseudo-tty master side",
- OPT_A2INFO | OPT_PRIVFIX | OPT_DEVNAM, &ptycommand_info },
+ OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
+
{ "notty", o_bool, ¬ty,
"Input/output is not a tty", OPT_DEVNAM | 1 },
+
{ "socket", o_string, &pty_socket,
- "Send and receive over socket, arg is host:port", OPT_DEVNAM },
+ "Send and receive over socket, arg is host:port",
+ OPT_PRIO | OPT_DEVNAM },
+
{ "record", o_string, &record_file,
- "Record characters sent/received to file" },
+ "Record characters sent/received to file", OPT_PRIO },
+
{ "crtscts", o_int, &crtscts,
- "Set hardware (RTS/CTS) flow control", OPT_NOARG|OPT_VAL(1) },
+ "Set hardware (RTS/CTS) flow control",
+ OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
+ { "cdtrcts", o_int, &crtscts,
+ "Set alternate hardware (DTR/CTS) flow control",
+ OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
{ "nocrtscts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
{ "-crtscts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
- { "cdtrcts", o_int, &crtscts,
- "Set alternate hardware (DTR/CTS) flow control", OPT_NOARG|OPT_VAL(2) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "nocdtrcts", o_int, &crtscts,
- "Disable hardware flow control", OPT_NOARG|OPT_VAL(-1) },
+ "Disable hardware flow control",
+ OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "xonxoff", o_special_noarg, (void *)setxonxoff,
- "Set software (XON/XOFF) flow control" },
+ "Set software (XON/XOFF) flow control", OPT_PRIOSUB },
+
{ "modem", o_bool, &modem,
- "Use modem control lines", 1 },
+ "Use modem control lines", OPT_PRIO | 1 },
{ "local", o_bool, &modem,
- "Don't use modem control lines" },
+ "Don't use modem control lines", OPT_PRIOSUB | 0 },
+
{ "sync", o_bool, &sync_serial,
"Use synchronous HDLC serial encoding", 1 },
+
{ "datarate", o_int, &max_data_rate,
- "Maximum data rate in bytes/sec (with pty, notty or record option)" },
+ "Maximum data rate in bytes/sec (with pty, notty or record option)",
+ OPT_PRIO },
+
+ { "escape", o_special, (void *)setescape,
+ "List of character codes to escape on transmission",
+ OPT_A2PRINTER, (void *)printescape },
+
{ NULL }
};
+
+struct channel tty_channel = {
+ tty_options,
+ &tty_process_extra_options,
+ &tty_check_options,
+ &connect_tty,
+ &disconnect_tty,
+ &tty_establish_ppp,
+ &tty_disestablish_ppp,
+ &tty_do_send_config,
+ &tty_recv_config,
+ &cleanup_tty,
+ &tty_close_fds
+};
+
+/*
+ * setspeed - Set the serial port baud rate.
+ * If doit is 0, the call is to check whether this option is
+ * potentially a speed value.
+ */
+static int
+setspeed(arg, argv, doit)
+ char *arg;
+ char **argv;
+ int doit;
+{
+ char *ptr;
+ int spd;
+
+ spd = strtol(arg, &ptr, 0);
+ if (ptr == arg || *ptr != 0 || spd == 0)
+ return 0;
+ if (doit) {
+ inspeed = spd;
+ slprintf(speed_str, sizeof(speed_str), "%d", spd);
+ }
+ return 1;
+}
+
+
+/*
+ * setdevname - Set the device name.
+ * If doit is 0, the call is to check whether this option is
+ * potentially a device name.
+ */
+static int
+setdevname(cp, argv, doit)
+ char *cp;
+ char **argv;
+ int doit;
+{
+ struct stat statbuf;
+ char dev[MAXPATHLEN];
+
+ if (*cp == 0)
+ return 0;
+
+ if (strncmp("/dev/", cp, 5) != 0) {
+ strlcpy(dev, "/dev/", sizeof(dev));
+ strlcat(dev, cp, sizeof(dev));
+ cp = dev;
+ }
+
+ /*
+ * Check if there is a character device by this name.
+ */
+ if (stat(cp, &statbuf) < 0) {
+ if (!doit)
+ return errno != ENOENT;
+ option_error("Couldn't stat %s: %m", cp);
+ return 0;
+ }
+ if (!S_ISCHR(statbuf.st_mode)) {
+ if (doit)
+ option_error("%s is not a character device", cp);
+ return 0;
+ }
+
+ if (doit) {
+ strlcpy(devnam, cp, sizeof(devnam));
+ devstat = statbuf;
+ default_device = 0;
+ }
+
+ return 1;
+}
+
static int
setxonxoff(argv)
char **argv;
return 1;
}
+/*
+ * setescape - add chars to the set we escape on transmission.
+ */
+static int
+setescape(argv)
+ char **argv;
+{
+ int n, ret;
+ char *p, *endp;
+
+ p = *argv;
+ ret = 1;
+ while (*p) {
+ n = strtol(p, &endp, 16);
+ if (p == endp) {
+ option_error("escape parameter contains invalid hex number '%s'",
+ p);
+ return 0;
+ }
+ p = endp;
+ if (n < 0 || n == 0x5E || n > 0xFF) {
+ option_error("can't escape character 0x%x", n);
+ ret = 0;
+ } else
+ xmit_accm[n >> 5] |= 1 << (n & 0x1F);
+ while (*p == ',' || *p == ' ')
+ ++p;
+ }
+ lcp_allowoptions[0].asyncmap = xmit_accm[0];
+ return ret;
+}
+
+static void
+printescape(opt, printer, arg)
+ option_t *opt;
+ void (*printer) __P((void *, char *, ...));
+ void *arg;
+{
+ int n;
+ int first = 1;
+
+ for (n = 0; n < 256; ++n) {
+ if (n == 0x7d)
+ n += 2; /* skip 7d, 7e */
+ if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
+ if (!first)
+ printer(arg, ",");
+ else
+ first = 0;
+ printer(arg, "%x", n);
+ }
+ }
+ if (first)
+ printer(arg, "oops # nothing escaped");
+}
+
/*
* tty_init - do various tty-related initializations.
*/
void tty_init()
{
add_notifier(&pidchange, maybe_relock, 0);
- add_options(tty_options);
+ the_channel = &tty_channel;
+ xmit_accm[3] = 0x60000000;
}
/*
- * tty_device_check - work out which tty device we are using
+ * tty_process_extra_options - work out which tty device we are using
* and read its options file.
*/
-void tty_device_check()
+void tty_process_extra_options()
{
using_pty = notty || ptycommand != NULL || pty_socket != NULL;
if (using_pty)
for (;;) {
/* If the user specified the device name, become the
user before opening it. */
- int err;
- if (!devnam_info.priv && !privopen)
+ int err, prio;
+
+ prio = privopen? OPRIO_ROOT: tty_options[0].priority;
+ if (prio < OPRIO_ROOT)
seteuid(uid);
ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
err = errno;
- if (!devnam_info.priv && !privopen)
+ if (prio < OPRIO_ROOT)
seteuid(0);
if (ttyfd >= 0)
break;
warn("Welcome script failed");
}
+ /*
+ * If we are initiating this connection, wait for a short
+ * time for something from the peer. This can avoid bouncing
+ * our packets off his tty before he has it set up.
+ */
if (connector != NULL || ptycommand != NULL)
listen_time = connect_delay;
}
}
+/*
+ * tty_do_send_config - set transmit-side PPP configuration.
+ * We set the extended transmit ACCM here as well.
+ */
+void
+tty_do_send_config(mtu, accm, pcomp, accomp)
+ int mtu;
+ u_int32_t accm;
+ int pcomp, accomp;
+{
+ tty_set_xaccm(xmit_accm);
+ tty_send_config(mtu, accm, pcomp, accomp);
+}
+
/*
* finish_tty - restore the terminal device to its original settings
*/
projects / ppp.git / blobdiff