static int if_is_up; /* Interface has been marked up */
static u_int32_t default_route_gateway; /* Gateway for default route added */
static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
-
-static char *lock_file;
+static char proxy_arp_dev[16]; /* Device for proxy arp entry */
static struct utsname utsname; /* for the kernel version */
static int kernel_version;
static int read_route_table (struct rtentry *rt);
static int defaultroute_exists (struct rtentry *rt);
static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
- char *name);
+ char *name, int namelen);
static void decode_version (char *buf, int *version, int *mod, int *patch);
static int set_kdebugflag(int level);
static int ppp_registered(void);
extern int hungup;
-#ifndef LOCK_PREFIX
-#define LOCK_PREFIX "/var/lock/LCK.."
-#endif
-
static void set_ppp_fd (int new_fd)
{
SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
void
sys_close(void)
{
- close(sock_fd);
- sock_fd = -1;
+ if (sock_fd >= 0)
+ close(sock_fd);
+ if (slave_fd >= 0)
+ close(slave_fd);
+ if (master_fd >= 0)
+ close(master_fd);
closelog();
}
void disestablish_ppp(int tty_fd)
{
+ int nout;
+
+ if (!hungup) {
/*
- * Attempt to restore the previous tty settings
+ * Flush the tty output buffer so that the TIOCSETD doesn't hang.
+ * We may have to do this several times because the tcflush only
+ * affects the serial driver, and may trigger the ppp driver to
+ * supply more data to the serial driver.
*/
- if (!hungup) {
+ do {
+ if (tcflush(tty_fd, TCIOFLUSH) < 0)
+ break;
+ nout = 0;
+ } while (ioctl(tty_fd, TIOCOUTQ, &nout) >= 0 && nout > 0);
/*
* Restore the previous line discipline
*/
x = get_flags();
x = pcomp ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
x = accomp ? x | SC_COMP_AC : x & ~SC_COMP_AC;
+ x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
set_flags(x);
}
int
get_ppp_stats(u, stats)
int u;
- struct ppp_stats *stats;
+ struct pppd_stats *stats;
{
struct ifpppstatsreq req;
error("Couldn't get PPP statistics: %m");
return 0;
}
- *stats = req.stats;
+ stats->bytes_in = req.stats.p.ppp_ibytes;
+ stats->bytes_out = req.stats.p.ppp_obytes;
return 1;
-}
+}
/********************************************************************
*
* Get the hardware address of an interface on the same subnet
* as our local address.
*/
- if (!get_ether_addr(his_adr, &arpreq.arp_ha, arpreq.arp_dev)) {
+ if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
+ sizeof(proxy_arp_dev))) {
error("Cannot determine ethernet address for proxy ARP");
return 0;
}
-
+ strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
+
if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
if ( ! ok_error ( errno ))
error("ioctl(SIOCSARP): %m(%d)", errno);
SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
((struct sockaddr_in *) &arpreq.arp_pa)->sin_addr.s_addr = his_adr;
arpreq.arp_flags = ATF_PERM | ATF_PUBL;
+ strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
if ( ! ok_error ( errno ))
static int get_ether_addr (u_int32_t ipaddr,
struct sockaddr *hwaddr,
- char *name)
+ char *name, int namelen)
{
struct ifreq *ifr, *ifend;
u_int32_t ina, mask;
if (ifr >= ifend)
return 0;
- memcpy (name, ifreq.ifr_name, sizeof(ifreq.ifr_name));
+ strlcpy(name, ifreq.ifr_name, namelen);
info("found interface %s for proxy arp", name);
/*
* Now get the hardware address.
ppp_registered(void)
{
int local_fd;
- int init_disc = -1;
- int initfdflags;
-
- local_fd = open(devnam, O_NONBLOCK | O_RDWR, 0);
- if (local_fd < 0) {
- error("Failed to open %s: %m(%d)", devnam, errno);
+ int mfd = -1;
+ int ret = 0;
+ char slave[16];
+
+ /*
+ * We used to open the serial device and set it to the ppp line
+ * discipline here, in order to create a ppp unit. But that is
+ * not a good idea - the user might have specified a device that
+ * they can't open (permission, or maybe it doesn't really exist).
+ * So we grab a pty master/slave pair and use that.
+ */
+ if (!get_pty(&mfd, &local_fd, slave, 0)) {
+ no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
return 0;
}
- initfdflags = fcntl(local_fd, F_GETFL);
- if (initfdflags == -1) {
- error("Couldn't get device fd flags: %m(%d)", errno);
- close (local_fd);
- return 0;
- }
-
- initfdflags &= ~O_NONBLOCK;
- fcntl(local_fd, F_SETFL, initfdflags);
-/*
- * Read the initial line dicipline and try to put the device into the
- * PPP dicipline.
- */
- if (ioctl(local_fd, TIOCGETD, &init_disc) < 0) {
- error("ioctl(TIOCGETD): %m(%d)", errno);
- close (local_fd);
- return 0;
- }
-
+ /*
+ * Try to put the device into the PPP discipline.
+ */
if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
- error("ioctl(TIOCSETD): %m(%d)", errno);
- close (local_fd);
- return 0;
- }
+ error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
+ } else
+ ret = 1;
- if (ioctl(local_fd, TIOCSETD, &init_disc) < 0) {
- error("ioctl(TIOCSETD): %m(%d)", errno);
- close (local_fd);
- return 0;
- }
-
- close (local_fd);
- return 1;
+ close(local_fd);
+ close(mfd);
+ return ret;
}
/********************************************************************
struct ifreq ifr;
int size;
int my_version, my_modification, my_patch;
- extern char *no_ppp_msg;
+
+ no_ppp_msg =
+ "This system lacks kernel support for PPP. This could be because\n"
+ "the PPP kernel module could not be loaded, or because PPP was not\n"
+ "included in the kernel configuration. If PPP was included as a\n"
+ "module, try `/sbin/modprobe -v ppp'. If that fails, check that\n"
+ "ppp.o exists in /lib/modules/`uname -r`/net.\n"
+ "See README.linux file in the ppp distribution for more details.\n";
+
/*
* Open a socket for doing the ioctl operations.
*/
if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
ok = 0;
- if (!ok)
- no_ppp_msg =
- "This system lacks kernel support for PPP. This could be because\n"
- "the PPP kernel module is not loaded, or because the kernel is\n"
- "not configured for PPP. See the README.linux file in the\n"
- "ppp-2.3.6 distribution.\n";
-
/*
* This is the PPP device. Validate the version of the driver at this
* point to ensure that this program will work with the driver.
*/
- else {
+ if (ok) {
char abBuffer [1024];
ifr.ifr_data = abBuffer;
memset(&ut, 0, sizeof(ut));
if (ut.ut_id[0] == 0)
- strlcpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
+ strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
- strlcpy(ut.ut_user, name, sizeof(ut.ut_user));
- strlcpy(ut.ut_line, line, sizeof(ut.ut_line));
+ strncpy(ut.ut_user, name, sizeof(ut.ut_user));
+ strncpy(ut.ut_line, line, sizeof(ut.ut_line));
time(&ut.ut_time);
/* Insert the host name if one is supplied */
if (*host)
- strlcpy (ut.ut_host, host, sizeof(ut.ut_host));
+ strncpy (ut.ut_host, host, sizeof(ut.ut_host));
/* Insert the IP address of the remote system if IP is enabled */
if (ipcp_protent.enabled_flag && ipcp_hisoptions[0].neg_addr)
}
}
+#if 0
/********************************************************************
* Code for locking/unlocking the serial device.
* This code is derived from chat.c.
*/
+#ifndef LOCK_PREFIX
+#define LOCK_PREFIX "/var/lock/LCK.."
+#endif
+
+static char *lock_file;
+
/*
* lock - create a lock file for the named device
*/
lock_file = NULL;
}
}
+#endif
/********************************************************************
*
if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
if (errno != EEXIST) {
if (! ok_error (errno))
- error("ioctl(SIOCAIFADDR): %m(%d)", errno);
+ error("ioctl(SIOCSIFADDR): %m(%d)", errno);
}
else {
- warn("ioctl(SIOCAIFADDR): Address already exists");
+ warn("ioctl(SIOCSIFADDR): Address already exists");
}
return (0);
}
return 1;
}
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode. Under Linux, we use a pty master/slave pair.
+/*
+ * get_pty - get a pty master/slave pair and chown the slave side
+ * to the uid given. Assumes slave_name points to >= 12 bytes of space.
*/
int
-open_ppp_loopback(void)
+get_pty(master_fdp, slave_fdp, slave_name, uid)
+ int *master_fdp;
+ int *slave_fdp;
+ char *slave_name;
+ int uid;
{
- int flags, i;
+ int i, mfd, sfd;
+ char pty_name[12];
struct termios tios;
- master_fd = -1;
+ sfd = -1;
for (i = 0; i < 64; ++i) {
- slprintf(loop_name, sizeof(loop_name), "/dev/pty%c%x",
+ slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
'p' + i / 16, i % 16);
- master_fd = open(loop_name, O_RDWR | O_NOCTTY, 0);
- if (master_fd >= 0)
- break;
+ mfd = open(pty_name, O_RDWR, 0);
+ if (mfd >= 0) {
+ pty_name[5] = 't';
+ sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
+ if (sfd >= 0)
+ break;
+ close(mfd);
+ }
}
- if (master_fd < 0)
- fatal("No free pty for loopback");
- SYSDEBUG(("using %s for loopback", loop_name));
- loop_name[5] = 't';
- slave_fd = open(loop_name, O_RDWR | O_NOCTTY, 0);
- if (slave_fd < 0)
- fatal("Couldn't open %s for loopback: %m", loop_name);
-
- set_ppp_fd(slave_fd);
+ if (sfd < 0)
+ return 0;
- if (tcgetattr(ppp_fd, &tios) == 0) {
+ strlcpy(slave_name, pty_name, 12);
+ *master_fdp = mfd;
+ *slave_fdp = sfd;
+ fchown(sfd, uid, -1);
+ fchmod(sfd, S_IRUSR | S_IWUSR);
+ if (tcgetattr(sfd, &tios) == 0) {
tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
tios.c_cflag |= CS8 | CREAD;
tios.c_iflag = IGNPAR | CLOCAL;
tios.c_oflag = 0;
tios.c_lflag = 0;
- if (tcsetattr(ppp_fd, TCSAFLUSH, &tios) < 0)
- warn("couldn't set attributes on loopback: %m(%d)", errno);
- }
+ if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
+ warn("couldn't set attributes on pty: %m");
+ } else
+ warn("couldn't get attributes on pty: %m");
+
+ return 1;
+}
+
+/********************************************************************
+ *
+ * open_loopback - open the device we use for getting packets
+ * in demand mode. Under Linux, we use a pty master/slave pair.
+ */
+int
+open_ppp_loopback(void)
+{
+ int flags;
+
+ if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
+ fatal("No free pty for loopback");
+ SYSDEBUG(("using %s for loopback", loop_name));
+
+ set_ppp_fd(slave_fd);
flags = fcntl(master_fd, F_GETFL);
if (flags == -1 ||
result = 0;
if (errno != EEXIST) {
if (! ok_error (errno))
- dbglog("ioctl(SIOCAIFADDR, CRTITF): %m (%d)", errno);
+ dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
}
else {
- warn("ioctl(SIOCAIFADDR, CRTITF): Address already exists");
+ warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
}
}
close (skfd);
*/
if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
if (! ok_error (errno))
- info("ioctl(SIOCAIFADDR, IPX_DLTITF): %m (%d)", errno);
+ info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
result = 0;
}
close (skfd);
return result;
}
+#if 0
/*
* daemon - Detach us from controlling terminal session.
*/
}
return 0;
}
+#endif
/*
* Use the hostname as part of the random number seed.
projects / ppp.git / blobdiff