+/*
+ * Option descriptor structure.
+ */
+
+typedef unsigned char bool;
+
+enum opt_type {
+ o_special_noarg = 0,
+ o_special = 1,
+ o_bool,
+ o_int,
+ o_uint32,
+ o_string,
+};
+
+typedef struct {
+ char *name; /* name of the option */
+ enum opt_type type;
+ void *addr;
+ char *description;
+ int flags;
+ void *addr2;
+ int upper_limit;
+ int lower_limit;
+} option_t;
+
+/* Values for flags */
+#define OPT_VALUE 0xff /* mask for presupplied value */
+#define OPT_HEX 0x100 /* int option is in hex */
+#define OPT_NOARG 0x200 /* option doesn't take argument */
+#define OPT_OR 0x400 /* OR in argument to value */
+#define OPT_INC 0x800 /* increment value */
+#define OPT_PRIV 0x1000 /* privileged option */
+#define OPT_STATIC 0x2000 /* string option goes into static array */
+#define OPT_LLIMIT 0x4000 /* check value against lower limit */
+#define OPT_ULIMIT 0x8000 /* check value against upper limit */
+#define OPT_LIMITS (OPT_LLIMIT|OPT_ULIMIT)
+#define OPT_ZEROOK 0x10000 /* 0 value is OK even if not within limits */
+#define OPT_NOINCR 0x20000 /* value mustn't be increased */
+#define OPT_ZEROINF 0x40000 /* with OPT_NOINCR, 0 == infinity */
+#define OPT_A2INFO 0x100000 /* addr2 -> option_info to update */
+#define OPT_A2COPY 0x200000 /* addr2 -> second location to rcv value */
+#define OPT_ENABLE 0x400000 /* use *addr2 as enable for option */
+
+#define OPT_VAL(x) ((x) & OPT_VALUE)
+
+/*
+ * Global variables.
+ */
+
+extern int hungup; /* Physical layer has disconnected */
+extern int ifunit; /* Interface unit number */
+extern char ifname[]; /* Interface name */
+extern int ttyfd; /* Serial device file descriptor */
+extern char hostname[]; /* Our hostname */
+extern u_char outpacket_buf[]; /* Buffer for outgoing packets */
+extern int phase; /* Current state of link - see values below */
+extern int baud_rate; /* Current link speed in bits/sec */
+extern char *progname; /* Name of this program */
+extern int redirect_stderr;/* Connector's stderr should go to file */
+extern char peer_authname[];/* Authenticated name of peer */
+extern int privileged; /* We were run by real-uid root */
+extern int need_holdoff; /* Need holdoff period after link terminates */
+extern char **script_env; /* Environment variables for scripts */
+extern int detached; /* Have detached from controlling tty */
+
+/*
+ * Variables set by command-line options.
+ */
+
+extern int debug; /* Debug flag */
+extern int kdebugflag; /* Tell kernel to print debug messages */
+extern int default_device; /* Using /dev/tty or equivalent */
+extern char devnam[]; /* Device name */
+extern int crtscts; /* Use hardware flow control */
+extern bool modem; /* Use modem control lines */
+extern int inspeed; /* Input/Output speed requested */
+extern u_int32_t netmask; /* IP netmask to set on interface */
+extern bool lockflag; /* Create lock file to lock the serial dev */
+extern bool nodetach; /* Don't detach from controlling tty */
+extern bool updetach; /* Detach from controlling tty when link up */
+extern char *connector; /* Script to establish physical link */
+extern char *disconnector; /* Script to disestablish physical link */
+extern char *welcomer; /* Script to welcome client after connection */
+extern int maxconnect; /* Maximum connect time (seconds) */
+extern char user[]; /* Our name for authenticating ourselves */
+extern char passwd[]; /* Password for PAP */
+extern bool auth_required; /* Peer is required to authenticate */
+extern bool persist; /* Reopen link after it goes down */
+extern bool uselogin; /* Use /etc/passwd for checking PAP */
+extern char our_name[]; /* Our name for authentication purposes */
+extern char remote_name[]; /* Peer's name for authentication */
+extern int explicit_remote;/* remote_name specified with remotename opt */
+extern bool demand; /* Do dial-on-demand */
+extern char *ipparam; /* Extra parameter for ip up/down scripts */
+extern bool cryptpap; /* Others' PAP passwords are encrypted */
+extern int idle_time_limit;/* Shut down link if idle for this long */
+extern int holdoff; /* Dead time before restarting */
+#ifdef PPP_FILTER
+extern struct bpf_program pass_filter; /* Filter for pkts to pass */
+extern struct bpf_program active_filter; /* Filter for link-active pkts */
+#endif
+
+char *current_option; /* the name of the option being parsed */
+int privileged_option; /* set iff the current option came from root */
+char *option_source; /* string saying where the option came from */
+
+#ifdef MSLANMAN
+extern bool ms_lanman; /* Use LanMan password instead of NT */
+ /* Has meaning only with MS-CHAP challenges */
+#endif
+
+/*
+ * Values for phase.
+ */
+#define PHASE_DEAD 0
+#define PHASE_INITIALIZE 1
+#define PHASE_DORMANT 2
+#define PHASE_ESTABLISH 3
+#define PHASE_AUTHENTICATE 4
+#define PHASE_CALLBACK 5
+#define PHASE_NETWORK 6
+#define PHASE_TERMINATE 7
+#define PHASE_HOLDOFF 8
+
+/*
+ * The following struct gives the addresses of procedures to call
+ * for a particular protocol.
+ */
+struct protent {
+ u_short protocol; /* PPP protocol number */
+ /* Initialization procedure */
+ void (*init) __P((int unit));
+ /* Process a received packet */
+ void (*input) __P((int unit, u_char *pkt, int len));
+ /* Process a received protocol-reject */
+ void (*protrej) __P((int unit));
+ /* Lower layer has come up */
+ void (*lowerup) __P((int unit));
+ /* Lower layer has gone down */
+ void (*lowerdown) __P((int unit));
+ /* Open the protocol */
+ void (*open) __P((int unit));
+ /* Close the protocol */
+ void (*close) __P((int unit, char *reason));
+ /* Print a packet in readable form */
+ int (*printpkt) __P((u_char *pkt, int len,
+ void (*printer) __P((void *, char *, ...)),
+ void *arg));
+ /* Process a received data packet */
+ void (*datainput) __P((int unit, u_char *pkt, int len));
+ bool enabled_flag; /* 0 iff protocol is disabled */
+ char *name; /* Text name of protocol */
+ option_t *options; /* List of command-line options */
+ /* Check requested options, assign defaults */
+ void (*check_options) __P((void));
+ /* Configure interface for demand-dial */
+ int (*demand_conf) __P((int unit));
+ /* Say whether to bring up link for this pkt */
+ int (*active_pkt) __P((u_char *pkt, int len));
+};
+
+/* Table of pointers to supported protocols */
+extern struct protent *protocols[];
+
+/*
+ * Prototypes.
+ */
+
+/* Procedures exported from main.c. */
+void detach __P((void)); /* Detach from controlling tty */
+void die __P((int)); /* Cleanup and exit */
+void quit __P((void)); /* like die(1) */
+void novm __P((char *)); /* Say we ran out of memory, and die */
+void timeout __P((void (*func)(void *), void *arg, int t));
+ /* Call func(arg) after t seconds */
+void untimeout __P((void (*func)(void *), void *arg));
+ /* Cancel call to func(arg) */
+pid_t run_program __P((char *prog, char **args, int must_exist,
+ void (*done)(void *), void *arg));
+ /* Run program prog with args in child */
+void demuxprotrej __P((int, int));