document the child-timeout option

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index c373a09ebcc8ea573ce0e7feecf4961355f466ff..753fb9827ad4be541d04e59717138bbf6edca0c9 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -1,5 +1,5 @@
 .\" manual page [] for pppd 2.4
 .\" manual page [] for pppd 2.4

-.\" $Id: pppd.8,v 1.75 2004/01/13 04:04:52 paulus Exp $
+.\" $Id: pppd.8,v 1.78 2004/11/04 09:57:42 paulus Exp $

 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph
 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph


@@ -266,8 +266,16 @@ Set the maximum number of CHAP challenge transmissions to \fIn\fR
 Set the CHAP restart interval (retransmission timeout for challenges)
 to \fIn\fR seconds (default 3).
 .TP
 Set the CHAP restart interval (retransmission timeout for challenges)
 to \fIn\fR seconds (default 3).
 .TP

+.B child-timeout \fIn
+When exiting, wait for up to \fIn\fR seconds for any child processes
+(such as the command specified with the \fBpty\fR command) to exit
+before exiting.  At the end of the timeout, pppd will send a SIGTERM
+signal to any remaining child processes and exit.  A value of 0 means
+no timeout, that is, pppd will wait until all child processes have
+exited.
+.TP

 .B connect-delay \fIn
 .B connect-delay \fIn

-Wait for up \fIn\fR milliseconds after the connect script finishes for
+Wait for up to \fIn\fR milliseconds after the connect script finishes for

 a valid PPP packet from the peer.  At the end of this time, or when a
 valid PPP packet is received from the peer, pppd will commence
 negotiation by sending its first LCP packet.  The default value is
 a valid PPP packet from the peer.  At the end of this time, or when a
 valid PPP packet is received from the peer, pppd will commence
 negotiation by sending its first LCP packet.  The default value is


@@ -955,11 +963,11 @@ Require the use of MPPE, with 40\-bit encryption.
 Require the use of MPPE, with 128\-bit encryption.
 .TP
 .B require-mschap
 Require the use of MPPE, with 128\-bit encryption.
 .TP
 .B require-mschap

-Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
+Require the peer to authenticate itself using MS-CHAP [Microsoft Challenge

 Handshake Authentication Protocol] authentication.
 .TP
 .B require-mschap-v2
 Handshake Authentication Protocol] authentication.
 .TP
 .B require-mschap-v2

-Require the peer to authenticate itself using MS-CHAPv2 [Microsft Challenge
+Require the peer to authenticate itself using MS-CHAPv2 [Microsoft Challenge

 Handshake Authentication Protocol, Version 2] authentication.
 .TP
 .B require-eap
 Handshake Authentication Protocol, Version 2] authentication.
 .TP
 .B require-eap


@@ -1556,6 +1564,14 @@ the connection.
 .TP
 .B LINKNAME
 The logical name of the link, set with the \fIlinkname\fR option.
 .TP
 .B LINKNAME
 The logical name of the link, set with the \fIlinkname\fR option.

+.TP
+.B DNS1
+If the peer supplies DNS server addresses, this variable is set to the
+first DNS server address supplied.
+.TP
+.B DNS2
+If the peer supplies DNS server addresses, this variable is set to the
+second DNS server address supplied.

 .P
 Pppd invokes the following scripts, if they exist.  It is not an error
 if they don't exist.
 .P
 Pppd invokes the following scripts, if they exist.  It is not an error
 if they don't exist.