.\" manual page [] for pppd 2.4
-.\" $Id: pppd.8,v 1.74 2003/11/27 21:55:19 paulus Exp $
+.\" $Id: pppd.8,v 1.78 2004/11/04 09:57:42 paulus Exp $
.\" SH section heading
.\" SS subsection heading
.\" LP paragraph
in the expression from being interpreted by the shell. This option
is currently only available under Linux, and requires that the kernel
was configured to include PPP filtering support (CONFIG_PPP_FILTER).
+Note that it
+is possible to apply different constraints to incoming and outgoing
+packets using the \fBinbound\fR and \fBoutbound\fR qualifiers.
.TP
.B allow-ip \fIaddress(es)
Allow peers to use the given IP address or subnet without
Set the CHAP restart interval (retransmission timeout for challenges)
to \fIn\fR seconds (default 3).
.TP
+.B child-timeout \fIn
+When exiting, wait for up to \fIn\fR seconds for any child processes
+(such as the command specified with the \fBpty\fR command) to exit
+before exiting. At the end of the timeout, pppd will send a SIGTERM
+signal to any remaining child processes and exit. A value of 0 means
+no timeout, that is, pppd will wait until all child processes have
+exited.
+.TP
.B connect-delay \fIn
-Wait for up \fIn\fR milliseconds after the connect script finishes for
+Wait for up to \fIn\fR milliseconds after the connect script finishes for
a valid PPP packet from the peer. At the end of this time, or when a
valid PPP packet is received from the peer, pppd will commence
negotiation by sending its first LCP packet. The default value is
Require the use of MPPE, with 128\-bit encryption.
.TP
.B require-mschap
-Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
+Require the peer to authenticate itself using MS-CHAP [Microsoft Challenge
Handshake Authentication Protocol] authentication.
.TP
.B require-mschap-v2
-Require the peer to authenticate itself using MS-CHAPv2 [Microsft Challenge
+Require the peer to authenticate itself using MS-CHAPv2 [Microsoft Challenge
Handshake Authentication Protocol, Version 2] authentication.
.TP
.B require-eap
.TP
.B LINKNAME
The logical name of the link, set with the \fIlinkname\fR option.
+.TP
+.B DNS1
+If the peer supplies DNS server addresses, this variable is set to the
+first DNS server address supplied.
+.TP
+.B DNS2
+If the peer supplies DNS server addresses, this variable is set to the
+second DNS server address supplied.
.P
Pppd invokes the following scripts, if they exist. It is not an error
if they don't exist.