* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#ifndef lint
-static char rcsid[] = "$Id: main.c,v 1.24 1995/06/12 11:22:49 paulus Exp $";
-#endif
+#define RCSID "$Id: main.c,v 1.117 2002/10/27 12:04:07 fcusack Exp $"
#include <stdio.h>
+#include <ctype.h>
#include <stdlib.h>
#include <string.h>
+#include <unistd.h>
#include <signal.h>
#include <errno.h>
#include <fcntl.h>
#include <netdb.h>
#include <utmp.h>
#include <pwd.h>
+#include <setjmp.h>
#include <sys/param.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/socket.h>
-#include <net/if.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
#include "pppd.h"
#include "magic.h"
#include "fsm.h"
#include "lcp.h"
#include "ipcp.h"
+#ifdef INET6
+#include "ipv6cp.h"
+#endif
#include "upap.h"
#include "chap.h"
#include "ccp.h"
+#include "ecp.h"
#include "pathnames.h"
-#include "patchlevel.h"
-/*
- * If REQ_SYSOPTIONS is defined to 1, pppd will not run unless
- * /etc/ppp/options exists.
- */
-#ifndef REQ_SYSOPTIONS
-#define REQ_SYSOPTIONS 1
+#ifdef USE_TDB
+#include "tdb.h"
+#endif
+
+#ifdef CBCP_SUPPORT
+#include "cbcp.h"
+#endif
+
+#ifdef IPX_CHANGE
+#include "ipxcp.h"
+#endif /* IPX_CHANGE */
+#ifdef AT_CHANGE
+#include "atcp.h"
#endif
+static const char rcsid[] = RCSID;
+
/* interface vars */
-char ifname[IFNAMSIZ]; /* Interface name */
+char ifname[32]; /* Interface name */
int ifunit; /* Interface unit number */
+struct channel *the_channel;
+
char *progname; /* Name of this program */
char hostname[MAXNAMELEN]; /* Our hostname */
static char pidfilename[MAXPATHLEN]; /* name of pid file */
-static char default_devnam[MAXPATHLEN]; /* name of default device */
-static pid_t pid; /* Our pid */
-static pid_t pgrpid; /* Process Group ID */
-static uid_t uid; /* Our real user-id */
+static char linkpidfile[MAXPATHLEN]; /* name of linkname pid file */
+char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */
+uid_t uid; /* Our real user-id */
+struct notifier *pidchange = NULL;
+struct notifier *phasechange = NULL;
+struct notifier *exitnotify = NULL;
+struct notifier *sigreceived = NULL;
+
+int hungup; /* terminal has been hung up */
+int privileged; /* we're running as real uid root */
+int need_holdoff; /* need holdoff period before restarting */
+int detached; /* have detached from terminal */
+volatile int status; /* exit status for pppd */
+int unsuccess; /* # unsuccessful connection attempts */
+int do_callback; /* != 0 if we should do callback next */
+int doing_callback; /* != 0 if we are doing callback */
+int ppp_session_number; /* Session number, for channels with such a
+ concept (eg PPPoE) */
+#ifdef USE_TDB
+TDB_CONTEXT *pppdb; /* database for storing status etc. */
+#endif
+
+char db_key[32];
-int fd = -1; /* Device file descriptor */
+int (*holdoff_hook) __P((void)) = NULL;
+int (*new_phase_hook) __P((int)) = NULL;
+void (*snoop_recv_hook) __P((unsigned char *p, int len)) = NULL;
+void (*snoop_send_hook) __P((unsigned char *p, int len)) = NULL;
+
+static int conn_running; /* we have a [dis]connector running */
+static int devfd; /* fd of underlying device */
+static int fd_ppp = -1; /* fd for talking PPP */
+static int fd_loop; /* fd for getting demand-dial packets */
int phase; /* where the link is at */
int kill_link;
int open_ccp_flag;
+int listen_time;
+int got_sigusr2;
+int got_sigterm;
+int got_sighup;
+
+static int waiting;
+static sigjmp_buf sigjmp;
-static int initfdflags = -1; /* Initial file descriptor flags */
+char **script_env; /* Env. variable values for scripts */
+int s_env_nalloc; /* # words avail at script_env */
u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */
-static u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
+u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
-int hungup; /* terminal has been hung up */
static int n_children; /* # child processes still running */
+static int got_sigchld; /* set if we have received a SIGCHLD */
+
+int privopen; /* don't lock, open device as root */
+
+char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
+
+GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */
+int ngroups; /* How many groups valid in groups */
-int baud_rate;
+static struct timeval start_time; /* Time when link was started. */
-/* prototypes */
+struct pppd_stats link_stats;
+int link_connect_time;
+int link_stats_valid;
+
+/*
+ * We maintain a list of child process pids and
+ * functions to call when they exit.
+ */
+struct subprocess {
+ pid_t pid;
+ char *prog;
+ void (*done) __P((void *));
+ void *arg;
+ struct subprocess *next;
+};
+
+static struct subprocess *children;
+
+/* Prototypes for procedures local to this file. */
+
+static void setup_signals __P((void));
+static void create_pidfile __P((void));
+static void create_linkpidfile __P((void));
+static void cleanup __P((void));
+static void get_input __P((void));
+static void calltimeout __P((void));
+static struct timeval *timeleft __P((struct timeval *));
+static void kill_my_pg __P((int));
static void hup __P((int));
static void term __P((int));
static void chld __P((int));
static void toggle_debug __P((int));
static void open_ccp __P((int));
+static void bad_signal __P((int));
+static void holdoff_end __P((void *));
+static int reap_kids __P((int waitfor));
+
+#ifdef USE_TDB
+static void update_db_entry __P((void));
+static void add_db_key __P((const char *));
+static void delete_db_key __P((const char *));
+static void cleanup_db __P((void));
+#endif
-static void get_input __P((void));
-void establish_ppp __P((void));
-void calltimeout __P((void));
-struct timeval *timeleft __P((struct timeval *));
-void reap_kids __P((void));
-void cleanup __P((int, caddr_t));
-void close_fd __P((void));
-void die __P((int));
-void novm __P((char *));
-
-void log_packet __P((u_char *, int, char *));
-void format_packet __P((u_char *, int,
- void (*) (void *, char *, ...), void *));
-void pr_log __P((void *, char *, ...));
+static void handle_events __P((void));
+static void print_link_stats __P((void));
extern char *ttyname __P((int));
extern char *getlogin __P((void));
+int main __P((int, char *[]));
#ifdef ultrix
#undef O_NONBLOCK
#define O_NONBLOCK O_NDELAY
#endif
+#ifdef ULTRIX
+#define setlogmask(x)
+#endif
+
/*
* PPP Data Link Layer "protocol" table.
* One entry per supported protocol.
+ * The last entry must be NULL.
*/
-static struct protent {
- u_short protocol;
- void (*init)();
- void (*input)();
- void (*protrej)();
- int (*printpkt)();
- void (*datainput)();
- char *name;
-} prottbl[] = {
- { PPP_LCP, lcp_init, lcp_input, lcp_protrej,
- lcp_printpkt, NULL, "LCP" },
- { PPP_IPCP, ipcp_init, ipcp_input, ipcp_protrej,
- ipcp_printpkt, NULL, "IPCP" },
- { PPP_PAP, upap_init, upap_input, upap_protrej,
- upap_printpkt, NULL, "PAP" },
- { PPP_CHAP, ChapInit, ChapInput, ChapProtocolReject,
- ChapPrintPkt, NULL, "CHAP" },
- { PPP_CCP, ccp_init, ccp_input, ccp_protrej,
- ccp_printpkt, ccp_datainput, "CCP" },
+struct protent *protocols[] = {
+ &lcp_protent,
+ &pap_protent,
+ &chap_protent,
+#ifdef CBCP_SUPPORT
+ &cbcp_protent,
+#endif
+ &ipcp_protent,
+#ifdef INET6
+ &ipv6cp_protent,
+#endif
+ &ccp_protent,
+ &ecp_protent,
+#ifdef IPX_CHANGE
+ &ipxcp_protent,
+#endif
+#ifdef AT_CHANGE
+ &atcp_protent,
+#endif
+ NULL
};
-#define N_PROTO (sizeof(prottbl) / sizeof(prottbl[0]))
+/*
+ * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name.
+ */
+#if !defined(PPP_DRV_NAME)
+#define PPP_DRV_NAME "ppp"
+#endif /* !defined(PPP_DRV_NAME) */
+int
main(argc, argv)
int argc;
char *argv[];
{
- int i, nonblock;
- struct sigaction sa;
- struct cmd *cmdp;
- FILE *pidfile;
+ int i, t;
char *p;
struct passwd *pw;
- struct timeval timo;
- sigset_t mask;
+ struct protent *protp;
+ char numbuf[16];
+
+ link_stats_valid = 0;
+ new_phase(PHASE_INITIALIZE);
+
+ /*
+ * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else.
+ * This way we can close 0, 1, 2 in detach() without clobbering
+ * a fd that we are using.
+ */
+ if ((i = open("/dev/null", O_RDWR)) >= 0) {
+ while (0 <= i && i <= 2)
+ i = dup(i);
+ if (i >= 0)
+ close(i);
+ }
+
+ script_env = NULL;
- p = ttyname(0);
- if (p)
- strcpy(devnam, p);
- strcpy(default_devnam, devnam);
+ /* Initialize syslog facilities */
+ reopen_log();
if (gethostname(hostname, MAXNAMELEN) < 0 ) {
- perror("couldn't get hostname");
- die(1);
+ option_error("Couldn't get hostname: %m");
+ exit(1);
}
hostname[MAXNAMELEN-1] = 0;
+ /* make sure we don't create world or group writable files. */
+ umask(umask(0777) | 022);
+
uid = getuid();
+ privileged = uid == 0;
+ slprintf(numbuf, sizeof(numbuf), "%d", uid);
+ script_setenv("ORIG_UID", numbuf, 0);
+
+ ngroups = getgroups(NGROUPS_MAX, groups);
+
+ /*
+ * Initialize magic number generator now so that protocols may
+ * use magic numbers in initialization.
+ */
+ magic_init();
+
+ /*
+ * Initialize each protocol.
+ */
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ (*protp->init)(0);
+
+ /*
+ * Initialize the default channel.
+ */
+ tty_init();
+
+ progname = *argv;
+
+ /*
+ * Parse, in order, the system options file, the user's options file,
+ * and the command line arguments.
+ */
+ if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
+ || !options_from_user()
+ || !parse_args(argc-1, argv+1))
+ exit(EXIT_OPTION_ERROR);
+ devnam_fixed = 1; /* can no longer change device name */
+
+ /*
+ * Work out the device name, if it hasn't already been specified,
+ * and parse the tty's options file.
+ */
+ if (the_channel->process_extra_options)
+ (*the_channel->process_extra_options)();
+
+ if (debug)
+ setlogmask(LOG_UPTO(LOG_DEBUG));
+
+ /*
+ * Check that we are running as root.
+ */
+ if (geteuid() != 0) {
+ option_error("must be root to run %s, since it is not setuid-root",
+ argv[0]);
+ exit(EXIT_NOT_ROOT);
+ }
if (!ppp_available()) {
- fprintf(stderr, "Sorry - PPP is not available on this system\n");
- exit(1);
+ option_error("%s", no_ppp_msg);
+ exit(EXIT_NO_KERNEL_SUPPORT);
}
/*
- * Initialize to the standard option set, then parse, in order,
- * the system options file, the user's options file, and the command
- * line arguments.
+ * Check that the options given are valid and consistent.
*/
- for (i = 0; i < N_PROTO; i++)
- (*prottbl[i].init)(0);
-
- progname = *argv;
+ check_options();
+ if (!sys_check_options())
+ exit(EXIT_OPTION_ERROR);
+ auth_check_options();
+#ifdef HAVE_MULTILINK
+ mp_check_options();
+#endif
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ if (protp->check_options != NULL)
+ (*protp->check_options)();
+ if (the_channel->check_options)
+ (*the_channel->check_options)();
+
- if (!options_from_file(_PATH_SYSOPTIONS, REQ_SYSOPTIONS, 0) ||
- !options_from_user() ||
- !parse_args(argc-1, argv+1) ||
- !options_for_tty())
- die(1);
- check_auth_options();
- setipdefault();
+ if (dump_options || dryrun) {
+ init_pr_log(NULL, LOG_INFO);
+ print_options(pr_log, NULL);
+ end_pr_log();
+ }
/*
- * If the user has specified the default device name explicitly,
- * pretend they hadn't.
+ * Early check for remote number authorization.
*/
- if (!default_device && strcmp(devnam, default_devnam) == 0)
- default_device = 1;
+ if (!auth_number()) {
+ warn("calling number %q is not authorized", remote_number);
+ exit(EXIT_CNID_AUTH_FAILED);
+ }
+
+ if (dryrun)
+ die(0);
/*
- * Initialize system-dependent stuff and magic number package.
+ * Initialize system-dependent stuff.
*/
sys_init();
- magic_init();
+
+#ifdef USE_TDB
+ pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
+ if (pppdb != NULL) {
+ slprintf(db_key, sizeof(db_key), "pppd%d", getpid());
+ update_db_entry();
+ } else {
+ warn("Warning: couldn't open ppp database %s", _PATH_PPPDB);
+ if (multilink) {
+ warn("Warning: disabling multilink");
+ multilink = 0;
+ }
+ }
+#endif
/*
* Detach ourselves from the terminal, if required,
* and identify who is running us.
*/
- if (!default_device && !nodetach && daemon(0, 0) < 0) {
- perror("Couldn't detach from controlling terminal");
- exit(1);
- }
- pid = getpid();
+ if (!nodetach && !updetach)
+ detach();
p = getlogin();
if (p == NULL) {
pw = getpwuid(uid);
else
p = "(unknown)";
}
- syslog(LOG_NOTICE, "pppd %s.%d started by %s, uid %d",
- VERSION, PATCHLEVEL, p, uid);
-
- /*
- * Compute mask of all interesting signals and install signal handlers
- * for each. Only one signal handler may be active at a time. Therefore,
- * all other signals should be masked when any handler is executing.
- */
- sigemptyset(&mask);
- sigaddset(&mask, SIGHUP);
- sigaddset(&mask, SIGINT);
- sigaddset(&mask, SIGTERM);
- sigaddset(&mask, SIGCHLD);
+ syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid);
+ script_setenv("PPPLOGNAME", p, 0);
-#define SIGNAL(s, handler) { \
- sa.sa_handler = handler; \
- if (sigaction(s, &sa, NULL) < 0) { \
- syslog(LOG_ERR, "Couldn't establish signal handler (%d): %m", s); \
- die(1); \
- } \
- }
+ if (devnam[0])
+ script_setenv("DEVICE", devnam, 1);
+ slprintf(numbuf, sizeof(numbuf), "%d", getpid());
+ script_setenv("PPPD_PID", numbuf, 1);
- sa.sa_mask = mask;
- sa.sa_flags = 0;
- SIGNAL(SIGHUP, hup); /* Hangup */
- SIGNAL(SIGINT, term); /* Interrupt */
- SIGNAL(SIGTERM, term); /* Terminate */
- SIGNAL(SIGCHLD, chld);
+ setup_signals();
- signal(SIGUSR1, toggle_debug); /* Toggle debug flag */
- signal(SIGUSR2, open_ccp); /* Reopen CCP */
+ waiting = 0;
+
+ create_linkpidfile();
/*
- * Lock the device if we've been asked to.
+ * If we're doing dial-on-demand, set up the interface now.
*/
- if (lockflag && !default_device)
- if (lock(devnam) < 0)
- die(1);
-
- do {
-
+ if (demand) {
/*
- * Open the serial device and set it up to be the ppp interface.
- * If we're dialling out, or we don't want to use the modem lines,
- * we open it in non-blocking mode, but then we need to clear
- * the non-blocking I/O bit.
+ * Open the loopback channel and set it up to be the ppp interface.
*/
- nonblock = (connector || !modem)? O_NONBLOCK: 0;
- if ((fd = open(devnam, nonblock | O_RDWR, 0)) < 0) {
- syslog(LOG_ERR, "Failed to open %s: %m", devnam);
- die(1);
- }
- if ((initfdflags = fcntl(fd, F_GETFL)) == -1) {
- syslog(LOG_ERR, "Couldn't get device fd flags: %m");
- die(1);
- }
- if (nonblock) {
- initfdflags &= ~O_NONBLOCK;
- fcntl(fd, F_SETFL, initfdflags);
- }
- hungup = 0;
- kill_link = 0;
-
- /* run connection script */
- if (connector && connector[0]) {
- MAINDEBUG((LOG_INFO, "Connecting with <%s>", connector));
-
- /* set line speed, flow control, etc.; set CLOCAL for now */
- set_up_tty(fd, 1);
-
- /* drop dtr to hang up in case modem is off hook */
- if (!default_device && modem) {
- setdtr(fd, FALSE);
- sleep(1);
- setdtr(fd, TRUE);
- }
+#ifdef USE_TDB
+ tdb_writelock(pppdb);
+#endif
+ fd_loop = open_ppp_loopback();
+ set_ifunit(1);
+#ifdef USE_TDB
+ tdb_writeunlock(pppdb);
+#endif
+ /*
+ * Configure the interface and mark it up, etc.
+ */
+ demand_conf();
+ }
- if (device_script(connector, fd, fd) < 0) {
- syslog(LOG_ERR, "Connect script failed");
- setdtr(fd, FALSE);
- die(1);
+ do_callback = 0;
+ for (;;) {
+
+ listen_time = 0;
+ need_holdoff = 1;
+ devfd = -1;
+ status = EXIT_OK;
+ ++unsuccess;
+ doing_callback = do_callback;
+ do_callback = 0;
+
+ if (demand && !doing_callback) {
+ /*
+ * Don't do anything until we see some activity.
+ */
+ new_phase(PHASE_DORMANT);
+ demand_unblock();
+ add_fd(fd_loop);
+ for (;;) {
+ handle_events();
+ if (kill_link && !persist)
+ break;
+ if (get_loop_output())
+ break;
}
+ remove_fd(fd_loop);
+ if (kill_link && !persist)
+ break;
- syslog(LOG_INFO, "Serial connection established.");
- sleep(1); /* give it time to set up its terminal */
+ /*
+ * Now we want to bring up the link.
+ */
+ demand_block();
+ info("Starting link");
}
- /* set line speed, flow control, etc.; clear CLOCAL if modem option */
- set_up_tty(fd, 0);
-
- /* set up the serial device as a ppp interface */
- establish_ppp();
+ new_phase(PHASE_SERIALCONN);
- syslog(LOG_INFO, "Using interface ppp%d", ifunit);
- (void) sprintf(ifname, "ppp%d", ifunit);
+ devfd = the_channel->connect();
+ if (devfd < 0)
+ goto fail;
- /* write pid to file */
- (void) sprintf(pidfilename, "%s%s.pid", _PATH_VARRUN, ifname);
- if ((pidfile = fopen(pidfilename, "w")) != NULL) {
- fprintf(pidfile, "%d\n", pid);
- (void) fclose(pidfile);
- } else {
- syslog(LOG_ERR, "Failed to create pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
+ /* set up the serial device as a ppp interface */
+#ifdef USE_TDB
+ tdb_writelock(pppdb);
+#endif
+ fd_ppp = the_channel->establish_ppp(devfd);
+ if (fd_ppp < 0) {
+#ifdef USE_TDB
+ tdb_writeunlock(pppdb);
+#endif
+ status = EXIT_FATAL_ERROR;
+ goto disconnect;
}
+ if (!demand && ifunit >= 0)
+ set_ifunit(1);
+#ifdef USE_TDB
+ tdb_writeunlock(pppdb);
+#endif
+
/*
- * Set device for non-blocking reads.
- */
- if (fcntl(fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
- syslog(LOG_ERR, "Couldn't set device to non-blocking mode: %m");
- die(1);
- }
-
- /*
- * Block all signals, start opening the connection, and wait for
+ * Start opening the connection and wait for
* incoming events (reply, timeout, etc.).
*/
- syslog(LOG_NOTICE, "Connect: %s <--> %s", ifname, devnam);
+ if (ifunit >= 0)
+ notice("Connect: %s <--> %s", ifname, ppp_devnam);
+ else
+ notice("Starting negotiation on %s", ppp_devnam);
+ gettimeofday(&start_time, NULL);
+ script_unsetenv("CONNECT_TIME");
+ script_unsetenv("BYTES_SENT");
+ script_unsetenv("BYTES_RCVD");
lcp_lowerup(0);
+
+ add_fd(fd_ppp);
lcp_open(0); /* Start protocol */
- for (phase = PHASE_ESTABLISH; phase != PHASE_DEAD; ) {
- wait_input(timeleft(&timo));
- calltimeout();
- if (kill_link) {
- lcp_close(0);
- kill_link = 0;
- }
+ status = EXIT_NEGOTIATION_FAILED;
+ new_phase(PHASE_ESTABLISH);
+ while (phase != PHASE_DEAD) {
+ handle_events();
+ get_input();
+ if (kill_link)
+ lcp_close(0, "User request");
if (open_ccp_flag) {
- if (phase == PHASE_NETWORK) {
+ if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
- ccp_open(0);
+ (*ccp_protent.open)(0);
}
- open_ccp_flag = 0;
}
- get_input();
- reap_kids(); /* Don't leave dead kids lying around */
}
+ print_link_stats();
+
+ /*
+ * Delete pid file before disestablishing ppp. Otherwise it
+ * can happen that another pppd gets the same unit and then
+ * we delete its pid file.
+ */
+ if (!demand) {
+ if (pidfilename[0] != 0
+ && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", pidfilename);
+ pidfilename[0] = 0;
+ }
+
+ /*
+ * If we may want to bring the link up again, transfer
+ * the ppp unit back to the loopback. Set the
+ * real serial device back to its normal mode of operation.
+ */
+ remove_fd(fd_ppp);
+ clean_check();
+ the_channel->disestablish_ppp(devfd);
+ fd_ppp = -1;
+ if (!hungup)
+ lcp_lowerdown(0);
+ if (!demand)
+ script_unsetenv("IFNAME");
+
/*
* Run disconnector script, if requested.
- * First we need to reset non-blocking mode.
* XXX we may not be able to do this if the line has hung up!
*/
- if (initfdflags != -1 && fcntl(fd, F_SETFL, initfdflags) >= 0)
- initfdflags = -1;
- disestablish_ppp();
- if (disconnector) {
- set_up_tty(fd, 1);
- if (device_script(disconnector, fd, fd) < 0) {
- syslog(LOG_WARNING, "disconnect script failed");
- } else {
- syslog(LOG_INFO, "Serial link disconnected.");
- }
+ disconnect:
+ new_phase(PHASE_DISCONNECT);
+ the_channel->disconnect();
+
+ fail:
+ if (the_channel->cleanup)
+ (*the_channel->cleanup)();
+
+ if (!demand) {
+ if (pidfilename[0] != 0
+ && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", pidfilename);
+ pidfilename[0] = 0;
+ }
+
+ if (!persist || (maxfail > 0 && unsuccess >= maxfail))
+ break;
+
+ if (demand)
+ demand_discard();
+ t = need_holdoff? holdoff: 0;
+ if (holdoff_hook)
+ t = (*holdoff_hook)();
+ if (t > 0) {
+ new_phase(PHASE_HOLDOFF);
+ TIMEOUT(holdoff_end, NULL, t);
+ do {
+ handle_events();
+ if (kill_link)
+ new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
+ } while (phase == PHASE_HOLDOFF);
+ if (!persist)
+ break;
+ }
+ }
+
+ /* Wait for scripts to finish */
+ /* XXX should have a timeout here */
+ while (n_children > 0) {
+ if (debug) {
+ struct subprocess *chp;
+ dbglog("Waiting for %d child processes...", n_children);
+ for (chp = children; chp != NULL; chp = chp->next)
+ dbglog(" script %s, pid %d", chp->prog, chp->pid);
+ }
+ if (reap_kids(1) < 0)
+ break;
+ }
+
+ die(status);
+ return 0;
+}
+
+/*
+ * handle_events - wait for something to happen and respond to it.
+ */
+static void
+handle_events()
+{
+ struct timeval timo;
+ sigset_t mask;
+
+ kill_link = open_ccp_flag = 0;
+ if (sigsetjmp(sigjmp, 1) == 0) {
+ sigprocmask(SIG_BLOCK, &mask, NULL);
+ if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ } else {
+ waiting = 1;
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ wait_input(timeleft(&timo));
}
+ }
+ waiting = 0;
+ calltimeout();
+ if (got_sighup) {
+ kill_link = 1;
+ got_sighup = 0;
+ if (status != EXIT_HANGUP)
+ status = EXIT_USER_REQUEST;
+ }
+ if (got_sigterm) {
+ kill_link = 1;
+ persist = 0;
+ status = EXIT_USER_REQUEST;
+ got_sigterm = 0;
+ }
+ if (got_sigchld) {
+ reap_kids(0); /* Don't leave dead kids lying around */
+ got_sigchld = 0;
+ }
+ if (got_sigusr2) {
+ open_ccp_flag = 1;
+ got_sigusr2 = 0;
+ }
+}
+
+/*
+ * setup_signals - initialize signal handling.
+ */
+static void
+setup_signals()
+{
+ struct sigaction sa;
+ sigset_t mask;
+
+ /*
+ * Compute mask of all interesting signals and install signal handlers
+ * for each. Only one signal handler may be active at a time. Therefore,
+ * all other signals should be masked when any handler is executing.
+ */
+ sigemptyset(&mask);
+ sigaddset(&mask, SIGHUP);
+ sigaddset(&mask, SIGINT);
+ sigaddset(&mask, SIGTERM);
+ sigaddset(&mask, SIGCHLD);
+ sigaddset(&mask, SIGUSR2);
+
+#define SIGNAL(s, handler) do { \
+ sa.sa_handler = handler; \
+ if (sigaction(s, &sa, NULL) < 0) \
+ fatal("Couldn't establish signal handler (%d): %m", s); \
+ } while (0)
+
+ sa.sa_mask = mask;
+ sa.sa_flags = 0;
+ SIGNAL(SIGHUP, hup); /* Hangup */
+ SIGNAL(SIGINT, term); /* Interrupt */
+ SIGNAL(SIGTERM, term); /* Terminate */
+ SIGNAL(SIGCHLD, chld);
+
+ SIGNAL(SIGUSR1, toggle_debug); /* Toggle debug flag */
+ SIGNAL(SIGUSR2, open_ccp); /* Reopen CCP */
+
+ /*
+ * Install a handler for other signals which would otherwise
+ * cause pppd to exit without cleaning up.
+ */
+ SIGNAL(SIGABRT, bad_signal);
+ SIGNAL(SIGALRM, bad_signal);
+ SIGNAL(SIGFPE, bad_signal);
+ SIGNAL(SIGILL, bad_signal);
+ SIGNAL(SIGPIPE, bad_signal);
+ SIGNAL(SIGQUIT, bad_signal);
+ SIGNAL(SIGSEGV, bad_signal);
+#ifdef SIGBUS
+ SIGNAL(SIGBUS, bad_signal);
+#endif
+#ifdef SIGEMT
+ SIGNAL(SIGEMT, bad_signal);
+#endif
+#ifdef SIGPOLL
+ SIGNAL(SIGPOLL, bad_signal);
+#endif
+#ifdef SIGPROF
+ SIGNAL(SIGPROF, bad_signal);
+#endif
+#ifdef SIGSYS
+ SIGNAL(SIGSYS, bad_signal);
+#endif
+#ifdef SIGTRAP
+ SIGNAL(SIGTRAP, bad_signal);
+#endif
+#ifdef SIGVTALRM
+ SIGNAL(SIGVTALRM, bad_signal);
+#endif
+#ifdef SIGXCPU
+ SIGNAL(SIGXCPU, bad_signal);
+#endif
+#ifdef SIGXFSZ
+ SIGNAL(SIGXFSZ, bad_signal);
+#endif
+
+ /*
+ * Apparently we can get a SIGPIPE when we call syslog, if
+ * syslogd has died and been restarted. Ignoring it seems
+ * be sufficient.
+ */
+ signal(SIGPIPE, SIG_IGN);
+}
+
+/*
+ * set_ifunit - do things we need to do once we know which ppp
+ * unit we are using.
+ */
+void
+set_ifunit(iskey)
+ int iskey;
+{
+ info("Using interface %s%d", PPP_DRV_NAME, ifunit);
+ slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
+ script_setenv("IFNAME", ifname, iskey);
+ if (iskey) {
+ create_pidfile(); /* write pid to file */
+ create_linkpidfile();
+ }
+}
+
+/*
+ * detach - detach us from the controlling terminal.
+ */
+void
+detach()
+{
+ int pid;
+ char numbuf[16];
+
+ if (detached)
+ return;
+ if ((pid = fork()) < 0) {
+ error("Couldn't detach (fork failed: %m)");
+ die(1); /* or just return? */
+ }
+ if (pid != 0) {
+ /* parent */
+ notify(pidchange, pid);
+ exit(0); /* parent dies */
+ }
+ setsid();
+ chdir("/");
+ close(0);
+ close(1);
+ close(2);
+ detached = 1;
+ if (log_default)
+ log_to_fd = -1;
+ /* update pid files if they have been written already */
+ if (pidfilename[0])
+ create_pidfile();
+ if (linkpidfile[0])
+ create_linkpidfile();
+ slprintf(numbuf, sizeof(numbuf), "%d", getpid());
+ script_setenv("PPPD_PID", numbuf, 1);
+}
+
+/*
+ * reopen_log - (re)open our connection to syslog.
+ */
+void
+reopen_log()
+{
+#ifdef ULTRIX
+ openlog("pppd", LOG_PID);
+#else
+ openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
+ setlogmask(LOG_UPTO(LOG_INFO));
+#endif
+}
+
+/*
+ * Create a file containing our process ID.
+ */
+static void
+create_pidfile()
+{
+ FILE *pidfile;
- close_fd();
- if (unlink(pidfilename) < 0 && errno != ENOENT)
- syslog(LOG_WARNING, "unable to delete pid file: %m");
+ slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
+ _PATH_VARRUN, ifname);
+ if ((pidfile = fopen(pidfilename, "w")) != NULL) {
+ fprintf(pidfile, "%d\n", getpid());
+ (void) fclose(pidfile);
+ } else {
+ error("Failed to create pid file %s: %m", pidfilename);
pidfilename[0] = 0;
+ }
+}
- } while (persist);
+static void
+create_linkpidfile()
+{
+ FILE *pidfile;
- die(0);
+ if (linkname[0] == 0)
+ return;
+ script_setenv("LINKNAME", linkname, 1);
+ slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid",
+ _PATH_VARRUN, linkname);
+ if ((pidfile = fopen(linkpidfile, "w")) != NULL) {
+ fprintf(pidfile, "%d\n", getpid());
+ if (ifname[0])
+ fprintf(pidfile, "%s\n", ifname);
+ (void) fclose(pidfile);
+ } else {
+ error("Failed to create pid file %s: %m", linkpidfile);
+ linkpidfile[0] = 0;
+ }
}
+/*
+ * holdoff_end - called via a timeout when the holdoff period ends.
+ */
+static void
+holdoff_end(arg)
+ void *arg;
+{
+ new_phase(PHASE_DORMANT);
+}
+
+/* List of protocol names, to make our messages a little more informative. */
+struct protocol_list {
+ u_short proto;
+ const char *name;
+} protocol_list[] = {
+ { 0x21, "IP" },
+ { 0x23, "OSI Network Layer" },
+ { 0x25, "Xerox NS IDP" },
+ { 0x27, "DECnet Phase IV" },
+ { 0x29, "Appletalk" },
+ { 0x2b, "Novell IPX" },
+ { 0x2d, "VJ compressed TCP/IP" },
+ { 0x2f, "VJ uncompressed TCP/IP" },
+ { 0x31, "Bridging PDU" },
+ { 0x33, "Stream Protocol ST-II" },
+ { 0x35, "Banyan Vines" },
+ { 0x39, "AppleTalk EDDP" },
+ { 0x3b, "AppleTalk SmartBuffered" },
+ { 0x3d, "Multi-Link" },
+ { 0x3f, "NETBIOS Framing" },
+ { 0x41, "Cisco Systems" },
+ { 0x43, "Ascom Timeplex" },
+ { 0x45, "Fujitsu Link Backup and Load Balancing (LBLB)" },
+ { 0x47, "DCA Remote Lan" },
+ { 0x49, "Serial Data Transport Protocol (PPP-SDTP)" },
+ { 0x4b, "SNA over 802.2" },
+ { 0x4d, "SNA" },
+ { 0x4f, "IP6 Header Compression" },
+ { 0x6f, "Stampede Bridging" },
+ { 0xfb, "single-link compression" },
+ { 0xfd, "1st choice compression" },
+ { 0x0201, "802.1d Hello Packets" },
+ { 0x0203, "IBM Source Routing BPDU" },
+ { 0x0205, "DEC LANBridge100 Spanning Tree" },
+ { 0x0231, "Luxcom" },
+ { 0x0233, "Sigma Network Systems" },
+ { 0x8021, "Internet Protocol Control Protocol" },
+ { 0x8023, "OSI Network Layer Control Protocol" },
+ { 0x8025, "Xerox NS IDP Control Protocol" },
+ { 0x8027, "DECnet Phase IV Control Protocol" },
+ { 0x8029, "Appletalk Control Protocol" },
+ { 0x802b, "Novell IPX Control Protocol" },
+ { 0x8031, "Bridging NCP" },
+ { 0x8033, "Stream Protocol Control Protocol" },
+ { 0x8035, "Banyan Vines Control Protocol" },
+ { 0x803d, "Multi-Link Control Protocol" },
+ { 0x803f, "NETBIOS Framing Control Protocol" },
+ { 0x8041, "Cisco Systems Control Protocol" },
+ { 0x8043, "Ascom Timeplex" },
+ { 0x8045, "Fujitsu LBLB Control Protocol" },
+ { 0x8047, "DCA Remote Lan Network Control Protocol (RLNCP)" },
+ { 0x8049, "Serial Data Control Protocol (PPP-SDCP)" },
+ { 0x804b, "SNA over 802.2 Control Protocol" },
+ { 0x804d, "SNA Control Protocol" },
+ { 0x804f, "IP6 Header Compression Control Protocol" },
+ { 0x006f, "Stampede Bridging Control Protocol" },
+ { 0x80fb, "Single Link Compression Control Protocol" },
+ { 0x80fd, "Compression Control Protocol" },
+ { 0xc021, "Link Control Protocol" },
+ { 0xc023, "Password Authentication Protocol" },
+ { 0xc025, "Link Quality Report" },
+ { 0xc027, "Shiva Password Authentication Protocol" },
+ { 0xc029, "CallBack Control Protocol (CBCP)" },
+ { 0xc081, "Container Control Protocol" },
+ { 0xc223, "Challenge Handshake Authentication Protocol" },
+ { 0xc281, "Proprietary Authentication Protocol" },
+ { 0, NULL },
+};
+
+/*
+ * protocol_name - find a name for a PPP protocol.
+ */
+const char *
+protocol_name(proto)
+ int proto;
+{
+ struct protocol_list *lp;
+
+ for (lp = protocol_list; lp->proto != 0; ++lp)
+ if (proto == lp->proto)
+ return lp->name;
+ return NULL;
+}
/*
* get_input - called when incoming data is available.
int len, i;
u_char *p;
u_short protocol;
+ struct protent *protp;
p = inpacket_buf; /* point to beginning of packet buffer */
return;
if (len == 0) {
- syslog(LOG_NOTICE, "Modem hangup");
+ notice("Modem hangup");
hungup = 1;
+ status = EXIT_HANGUP;
lcp_lowerdown(0); /* serial link is no longer available */
- phase = PHASE_DEAD;
+ link_terminated(0);
return;
}
- if (debug /*&& (debugflags & DBG_INPACKET)*/)
- log_packet(p, len, "rcvd ");
-
if (len < PPP_HDRLEN) {
- MAINDEBUG((LOG_INFO, "io(): Received short packet."));
+ dbglog("received short packet:%.*B", len, p);
return;
}
+ dump_packet("rcvd", p, len);
+ if (snoop_recv_hook) snoop_recv_hook(p, len);
+
p += 2; /* Skip address and control */
GETSHORT(protocol, p);
len -= PPP_HDRLEN;
* Toss all non-LCP packets unless LCP is OPEN.
*/
if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
- MAINDEBUG((LOG_INFO,
- "io(): Received non-LCP packet when LCP not open."));
+ MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
+ return;
+ }
+
+ /*
+ * Until we get past the authentication phase, toss all packets
+ * except LCP, LQR and authentication packets.
+ */
+ if (phase <= PHASE_AUTHENTICATE
+ && !(protocol == PPP_LCP || protocol == PPP_LQR
+ || protocol == PPP_PAP || protocol == PPP_CHAP)) {
+ MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
+ protocol, phase));
return;
}
/*
* Upcall the proper protocol input routine.
*/
- for (i = 0; i < sizeof (prottbl) / sizeof (struct protent); i++) {
- if (prottbl[i].protocol == protocol) {
- (*prottbl[i].input)(0, p, len);
+ for (i = 0; (protp = protocols[i]) != NULL; ++i) {
+ if (protp->protocol == protocol && protp->enabled_flag) {
+ (*protp->input)(0, p, len);
return;
}
- if (protocol == (prottbl[i].protocol & ~0x8000)
- && prottbl[i].datainput != NULL) {
- (*prottbl[i].datainput)(0, p, len);
+ if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag
+ && protp->datainput != NULL) {
+ (*protp->datainput)(0, p, len);
return;
}
}
- if (debug)
- syslog(LOG_WARNING, "Unknown protocol (0x%x) received", protocol);
+ if (debug) {
+ const char *pname = protocol_name(protocol);
+ if (pname != NULL)
+ warn("Unsupported protocol '%s' (0x%x) received", pname, protocol);
+ else
+ warn("Unsupported protocol 0x%x received", protocol);
+ }
lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
}
-
/*
- * demuxprotrej - Demultiplex a Protocol-Reject.
+ * new_phase - signal the start of a new phase of pppd's operation.
*/
void
-demuxprotrej(unit, protocol)
- int unit;
- u_short protocol;
-{
- int i;
-
- /*
- * Upcall the proper Protocol-Reject routine.
- */
- for (i = 0; i < sizeof (prottbl) / sizeof (struct protent); i++)
- if (prottbl[i].protocol == protocol) {
- (*prottbl[i].protrej)(unit);
- return;
- }
-
- syslog(LOG_WARNING,
- "demuxprotrej: Unrecognized Protocol-Reject for protocol 0x%x",
- protocol);
-}
-
-
-/*
- * quit - Clean up state and exit.
- */
-void
-quit()
+new_phase(p)
+ int p;
{
- die(0);
+ phase = p;
+ if (new_phase_hook)
+ (*new_phase_hook)(p);
+ notify(phasechange, p);
}
/*
- * die - like quit, except we can specify an exit status.
+ * die - clean up state and exit with the specified status.
*/
void
die(status)
int status;
{
- cleanup(0, NULL);
+ print_link_stats();
+ cleanup();
+ notify(exitnotify, status);
syslog(LOG_INFO, "Exit.");
exit(status);
}
* cleanup - restore anything which needs to be restored before we exit
*/
/* ARGSUSED */
-void
-cleanup(status, arg)
- int status;
- caddr_t arg;
+static void
+cleanup()
{
- if (fd >= 0)
- close_fd();
+ sys_cleanup();
+
+ if (fd_ppp >= 0)
+ the_channel->disestablish_ppp(devfd);
+ if (the_channel->cleanup)
+ (*the_channel->cleanup)();
- if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
- syslog(LOG_WARNING, "unable to delete pid file: %m");
+ if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", pidfilename);
pidfilename[0] = 0;
+ if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", linkpidfile);
+ linkpidfile[0] = 0;
+
+#ifdef USE_TDB
+ if (pppdb != NULL)
+ cleanup_db();
+#endif
+
+}
- if (lockflag && !default_device)
- unlock();
+void
+print_link_stats()
+{
+ /*
+ * Print connect time and statistics.
+ */
+ if (link_stats_valid) {
+ int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */
+ info("Connect time %d.%d minutes.", t/10, t%10);
+ info("Sent %u bytes, received %u bytes.",
+ link_stats.bytes_out, link_stats.bytes_in);
+ }
}
/*
- * close_fd - restore the terminal device and close it.
+ * update_link_stats - get stats at link termination.
*/
void
-close_fd()
+update_link_stats(u)
+ int u;
{
- disestablish_ppp();
-
- /* drop dtr to hang up */
- if (modem)
- setdtr(fd, FALSE);
-
- if (initfdflags != -1 && fcntl(fd, F_SETFL, initfdflags) < 0)
- syslog(LOG_WARNING, "Couldn't restore device fd flags: %m");
- initfdflags = -1;
-
- restore_tty();
+ struct timeval now;
+ char numbuf[32];
- close(fd);
- fd = -1;
+ if (!get_ppp_stats(u, &link_stats)
+ || gettimeofday(&now, NULL) < 0)
+ return;
+ link_connect_time = now.tv_sec - start_time.tv_sec;
+ link_stats_valid = 1;
+
+ slprintf(numbuf, sizeof(numbuf), "%u", link_connect_time);
+ script_setenv("CONNECT_TIME", numbuf, 0);
+ slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_out);
+ script_setenv("BYTES_SENT", numbuf, 0);
+ slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_in);
+ script_setenv("BYTES_RCVD", numbuf, 0);
}
struct callout {
struct timeval c_time; /* time at which to call routine */
- caddr_t c_arg; /* argument to routine */
- void (*c_func)(); /* routine */
+ void *c_arg; /* argument to routine */
+ void (*c_func) __P((void *)); /* routine */
struct callout *c_next;
};
/*
* timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of seconds, NOT hz (as in
- * the kernel).
*/
void
-timeout(func, arg, time)
- void (*func)();
- caddr_t arg;
- int time;
+timeout(func, arg, secs, usecs)
+ void (*func) __P((void *));
+ void *arg;
+ int secs, usecs;
{
struct callout *newp, *p, **pp;
-
- MAINDEBUG((LOG_DEBUG, "Timeout %lx:%lx in %d seconds.",
- (long) func, (long) arg, time));
-
+
+ MAINDEBUG(("Timeout %p:%p in %d.%03d seconds.", func, arg,
+ secs, usecs/1000));
+
/*
* Allocate timeout.
*/
- if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL) {
- syslog(LOG_ERR, "Out of memory in timeout()!");
- die(1);
- }
+ if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL)
+ fatal("Out of memory in timeout()!");
newp->c_arg = arg;
newp->c_func = func;
gettimeofday(&timenow, NULL);
- newp->c_time.tv_sec = timenow.tv_sec + time;
- newp->c_time.tv_usec = timenow.tv_usec;
-
+ newp->c_time.tv_sec = timenow.tv_sec + secs;
+ newp->c_time.tv_usec = timenow.tv_usec + usecs;
+ if (newp->c_time.tv_usec >= 1000000) {
+ newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000;
+ newp->c_time.tv_usec %= 1000000;
+ }
+
/*
* Find correct place and link it in.
*/
for (pp = &callout; (p = *pp); pp = &p->c_next)
if (newp->c_time.tv_sec < p->c_time.tv_sec
|| (newp->c_time.tv_sec == p->c_time.tv_sec
- && newp->c_time.tv_usec < p->c_time.tv_sec))
+ && newp->c_time.tv_usec < p->c_time.tv_usec))
break;
newp->c_next = p;
*pp = newp;
*/
void
untimeout(func, arg)
- void (*func)();
- caddr_t arg;
+ void (*func) __P((void *));
+ void *arg;
{
- struct itimerval itv;
struct callout **copp, *freep;
- int reschedule = 0;
-
- MAINDEBUG((LOG_DEBUG, "Untimeout %lx:%lx.", (long) func, (long) arg));
-
+
+ MAINDEBUG(("Untimeout %p:%p.", func, arg));
+
/*
* Find first matching timeout and remove it from the list.
*/
for (copp = &callout; (freep = *copp); copp = &freep->c_next)
if (freep->c_func == func && freep->c_arg == arg) {
*copp = freep->c_next;
- (void) free((char *) freep);
+ free((char *) freep);
break;
}
}
/*
* calltimeout - Call any timeout routines which are now due.
*/
-void
+static void
calltimeout()
{
struct callout *p;
while (callout != NULL) {
p = callout;
- if (gettimeofday(&timenow, NULL) < 0) {
- syslog(LOG_ERR, "Failed to get time of day: %m");
- die(1);
- }
+ if (gettimeofday(&timenow, NULL) < 0)
+ fatal("Failed to get time of day: %m");
if (!(p->c_time.tv_sec < timenow.tv_sec
|| (p->c_time.tv_sec == timenow.tv_sec
&& p->c_time.tv_usec <= timenow.tv_usec)))
/*
* timeleft - return the length of time until the next timeout is due.
*/
-struct timeval *
+static struct timeval *
timeleft(tvp)
struct timeval *tvp;
{
return tvp;
}
-
+
+
+/*
+ * kill_my_pg - send a signal to our process group, and ignore it ourselves.
+ */
+static void
+kill_my_pg(sig)
+ int sig;
+{
+ struct sigaction act, oldact;
+
+ act.sa_handler = SIG_IGN;
+ act.sa_flags = 0;
+ kill(0, sig);
+ sigaction(sig, &act, &oldact);
+ sigaction(sig, &oldact, NULL);
+}
+
/*
* hup - Catch SIGHUP signal.
hup(sig)
int sig;
{
- syslog(LOG_INFO, "Hangup (SIGHUP)");
- kill_link = 1;
+ info("Hangup (SIGHUP)");
+ got_sighup = 1;
+ if (conn_running)
+ /* Send the signal to the [dis]connector process(es) also */
+ kill_my_pg(sig);
+ notify(sigreceived, sig);
+ if (waiting)
+ siglongjmp(sigjmp, 1);
}
term(sig)
int sig;
{
- syslog(LOG_INFO, "Terminating on signal %d.", sig);
- persist = 0; /* don't try to restart */
- kill_link = 1;
+ info("Terminating on signal %d.", sig);
+ got_sigterm = 1;
+ if (conn_running)
+ /* Send the signal to the [dis]connector process(es) also */
+ kill_my_pg(sig);
+ notify(sigreceived, sig);
+ if (waiting)
+ siglongjmp(sigjmp, 1);
}
/*
* chld - Catch SIGCHLD signal.
- * Calls reap_kids to get status for any dead kids.
+ * Sets a flag so we will call reap_kids in the mainline.
*/
static void
chld(sig)
int sig;
{
- reap_kids();
+ got_sigchld = 1;
+ if (waiting)
+ siglongjmp(sigjmp, 1);
}
int sig;
{
debug = !debug;
- note_debug_level();
+ if (debug) {
+ setlogmask(LOG_UPTO(LOG_DEBUG));
+ } else {
+ setlogmask(LOG_UPTO(LOG_WARNING));
+ }
}
open_ccp(sig)
int sig;
{
- open_ccp_flag = 1;
+ got_sigusr2 = 1;
+ if (waiting)
+ siglongjmp(sigjmp, 1);
+}
+
+
+/*
+ * bad_signal - We've caught a fatal signal. Clean up state and exit.
+ */
+static void
+bad_signal(sig)
+ int sig;
+{
+ static int crashed = 0;
+
+ if (crashed)
+ _exit(127);
+ crashed = 1;
+ error("Fatal signal %d", sig);
+ if (conn_running)
+ kill_my_pg(SIGTERM);
+ notify(sigreceived, sig);
+ die(127);
}
/*
- * device_script - run a program to connect or disconnect the
- * serial device.
+ * device_script - run a program to talk to the specified fds
+ * (e.g. to run the connector or disconnector script).
+ * stderr gets connected to the log fd or to the _PATH_CONNERRS file.
*/
int
-device_script(program, in, out)
+device_script(program, in, out, dont_wait)
char *program;
int in, out;
+ int dont_wait;
{
- int pid;
- int status;
+ int pid, fd;
+ int status = -1;
int errfd;
+ ++conn_running;
pid = fork();
if (pid < 0) {
- syslog(LOG_ERR, "Failed to create child process: %m");
- die(1);
+ --conn_running;
+ error("Failed to create child process: %m");
+ return -1;
}
- if (pid == 0) {
- dup2(in, 0);
- dup2(out, 1);
- errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0644);
- if (errfd >= 0)
- dup2(errfd, 2);
- setuid(getuid());
- setgid(getgid());
- execl("/bin/sh", "sh", "-c", program, (char *)0);
- syslog(LOG_ERR, "could not exec /bin/sh: %m");
- _exit(99);
- /* NOTREACHED */
+ if (pid != 0) {
+ if (dont_wait) {
+ record_child(pid, program, NULL, NULL);
+ status = 0;
+ } else {
+ while (waitpid(pid, &status, 0) < 0) {
+ if (errno == EINTR)
+ continue;
+ fatal("error waiting for (dis)connection process: %m");
+ }
+ --conn_running;
+ }
+ return (status == 0 ? 0 : -1);
+ }
+
+ /* here we are executing in the child */
+ /* make sure fds 0, 1, 2 are occupied */
+ while ((fd = dup(in)) >= 0) {
+ if (fd > 2) {
+ close(fd);
+ break;
+ }
+ }
+
+ /* dup in and out to fds > 2 */
+ in = dup(in);
+ out = dup(out);
+ if (log_to_fd >= 0) {
+ errfd = dup(log_to_fd);
+ } else {
+ errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
}
- while (waitpid(pid, &status, 0) < 0) {
- if (errno == EINTR)
- continue;
- syslog(LOG_ERR, "error waiting for (dis)connection process: %m");
- die(1);
+ /* close fds 0 - 2 and any others we can think of */
+ close(0);
+ close(1);
+ close(2);
+ sys_close();
+ if (the_channel->close)
+ (*the_channel->close)();
+ closelog();
+
+ /* dup the in, out, err fds to 0, 1, 2 */
+ dup2(in, 0);
+ close(in);
+ dup2(out, 1);
+ close(out);
+ if (errfd >= 0) {
+ dup2(errfd, 2);
+ close(errfd);
}
- return (status == 0 ? 0 : -1);
+ setuid(uid);
+ if (getuid() != uid) {
+ error("setuid failed");
+ exit(1);
+ }
+ setgid(getgid());
+ execl("/bin/sh", "sh", "-c", program, (char *)0);
+ error("could not exec /bin/sh: %m");
+ exit(99);
+ /* NOTREACHED */
}
* but don't wait for it.
* If the program can't be executed, logs an error unless
* must_exist is 0 and the program file doesn't exist.
+ * Returns -1 if it couldn't fork, 0 if the file doesn't exist
+ * or isn't an executable plain file, or the process ID of the child.
+ * If done != NULL, (*done)(arg) will be called later (within
+ * reap_kids) iff the return value is > 0.
*/
-int
-run_program(prog, args, must_exist)
+pid_t
+run_program(prog, args, must_exist, done, arg)
char *prog;
char **args;
int must_exist;
+ void (*done) __P((void *));
+ void *arg;
{
int pid;
- char *nullenv[1];
+ struct stat sbuf;
+
+ /*
+ * First check if the file exists and is executable.
+ * We don't use access() because that would use the
+ * real user-id, which might not be root, and the script
+ * might be accessible only to root.
+ */
+ errno = EINVAL;
+ if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode)
+ || (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) {
+ if (must_exist || errno != ENOENT)
+ warn("Can't execute %s: %m", prog);
+ return 0;
+ }
pid = fork();
if (pid == -1) {
- syslog(LOG_ERR, "Failed to create child process for %s: %m", prog);
+ error("Failed to create child process for %s: %m", prog);
return -1;
}
if (pid == 0) {
int new_fd;
/* Leave the current location */
- (void) setsid(); /* No controlling tty. */
+ (void) setsid(); /* No controlling tty. */
(void) umask (S_IRWXG|S_IRWXO);
- (void) chdir ("/"); /* no current directory. */
- setuid(geteuid());
+ (void) chdir ("/"); /* no current directory. */
+ setuid(0); /* set real UID = root */
setgid(getegid());
/* Ensure that nothing of our device environment is inherited. */
+ sys_close();
+ closelog();
close (0);
close (1);
close (2);
- close (fd); /* tty interface to the ppp device */
- /* XXX should call sysdep cleanup procedure here */
+ if (the_channel->close)
+ (*the_channel->close)();
/* Don't pass handles to the PPP device, even by accident. */
new_fd = open (_PATH_DEVNULL, O_RDWR);
#ifdef BSD
/* Force the priority back to zero if pppd is running higher. */
if (setpriority (PRIO_PROCESS, 0, 0) < 0)
- syslog (LOG_WARNING, "can't reset priority to 0: %m");
+ warn("can't reset priority to 0: %m");
#endif
/* SysV recommends a second fork at this point. */
- /* run the program; give it a null environment */
- nullenv[0] = NULL;
- execve(prog, args, nullenv);
- if (must_exist || errno != ENOENT)
- syslog(LOG_WARNING, "Can't execute %s: %m", prog);
+ /* run the program */
+ execve(prog, args, script_env);
+ if (must_exist || errno != ENOENT) {
+ /* have to reopen the log, there's nowhere else
+ for the message to go. */
+ reopen_log();
+ syslog(LOG_ERR, "Can't execute %s: %m", prog);
+ closelog();
+ }
_exit(-1);
}
- MAINDEBUG((LOG_DEBUG, "Script %s started; pid = %d", prog, pid));
+
+ if (debug)
+ dbglog("Script %s started (pid %d)", prog, pid);
+ record_child(pid, prog, done, arg);
+
+ return pid;
+}
+
+
+/*
+ * record_child - add a child process to the list for reap_kids
+ * to use.
+ */
+void
+record_child(pid, prog, done, arg)
+ int pid;
+ char *prog;
+ void (*done) __P((void *));
+ void *arg;
+{
+ struct subprocess *chp;
+
++n_children;
- return 0;
+
+ chp = (struct subprocess *) malloc(sizeof(struct subprocess));
+ if (chp == NULL) {
+ warn("losing track of %s process", prog);
+ } else {
+ chp->pid = pid;
+ chp->prog = prog;
+ chp->done = done;
+ chp->arg = arg;
+ chp->next = children;
+ children = chp;
+ }
}
* reap_kids - get status from any dead child processes,
* and log a message for abnormal terminations.
*/
-void
-reap_kids()
+static int
+reap_kids(waitfor)
+ int waitfor;
{
int pid, status;
+ struct subprocess *chp, **prevp;
if (n_children == 0)
- return;
- if ((pid = waitpid(-1, &status, WNOHANG)) == -1) {
- if (errno != ECHILD)
- syslog(LOG_ERR, "Error waiting for child process: %m");
- return;
- }
- if (pid > 0) {
- --n_children;
- if (WIFSIGNALED(status)) {
- syslog(LOG_WARNING, "Child process %d terminated with signal %d",
- pid, WTERMSIG(status));
+ return 0;
+ while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
+ && pid != 0) {
+ for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
+ if (chp->pid == pid) {
+ --n_children;
+ *prevp = chp->next;
+ break;
+ }
}
+ if (WIFSIGNALED(status)) {
+ warn("Child process %s (pid %d) terminated with signal %d",
+ (chp? chp->prog: "??"), pid, WTERMSIG(status));
+ } else if (debug)
+ dbglog("Script %s finished (pid %d), status = 0x%x",
+ (chp? chp->prog: "??"), pid,
+ WIFEXITED(status) ? WEXITSTATUS(status) : status);
+ if (chp && chp->done)
+ (*chp->done)(chp->arg);
+ if (chp)
+ free(chp);
+ }
+ if (pid == -1) {
+ if (errno == ECHILD)
+ return -1;
+ if (errno != EINTR)
+ error("Error waiting for child process: %m");
}
+ return 0;
}
-
/*
- * log_packet - format a packet and log it.
+ * add_notifier - add a new function to be called when something happens.
*/
-
-char line[256]; /* line to be logged accumulated here */
-char *linep;
-
void
-log_packet(p, len, prefix)
- u_char *p;
- int len;
- char *prefix;
+add_notifier(notif, func, arg)
+ struct notifier **notif;
+ notify_func func;
+ void *arg;
{
- strcpy(line, prefix);
- linep = line + strlen(line);
- format_packet(p, len, pr_log, NULL);
- if (linep != line)
- syslog(LOG_DEBUG, "%s", line);
+ struct notifier *np;
+
+ np = malloc(sizeof(struct notifier));
+ if (np == 0)
+ novm("notifier struct");
+ np->next = *notif;
+ np->func = func;
+ np->arg = arg;
+ *notif = np;
}
/*
- * format_packet - make a readable representation of a packet,
- * calling `printer(arg, format, ...)' to output it.
+ * remove_notifier - remove a function from the list of things to
+ * be called when something happens.
*/
void
-format_packet(p, len, printer, arg)
- u_char *p;
- int len;
- void (*printer) __P((void *, char *, ...));
+remove_notifier(notif, func, arg)
+ struct notifier **notif;
+ notify_func func;
void *arg;
{
- int i, n;
- u_short proto;
- u_char x;
-
- if (len >= PPP_HDRLEN && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
- p += 2;
- GETSHORT(proto, p);
- len -= PPP_HDRLEN;
- for (i = 0; i < N_PROTO; ++i)
- if (proto == prottbl[i].protocol)
- break;
- if (i < N_PROTO) {
- printer(arg, "[%s", prottbl[i].name);
- n = (*prottbl[i].printpkt)(p, len, printer, arg);
- printer(arg, "]");
- p += n;
- len -= n;
- } else {
- printer(arg, "[proto=0x%x]", proto);
- }
- }
+ struct notifier *np;
- for (; len > 0; --len) {
- GETCHAR(x, p);
- printer(arg, " %.2x", x);
+ for (; (np = *notif) != 0; notif = &np->next) {
+ if (np->func == func && np->arg == arg) {
+ *notif = np->next;
+ free(np);
+ break;
+ }
}
}
-#ifdef __STDC__
-#include <stdarg.h>
-
+/*
+ * notify - call a set of functions registered with add_notifier.
+ */
void
-pr_log(void *arg, char *fmt, ...)
+notify(notif, val)
+ struct notifier *notif;
+ int val;
{
- int n;
- va_list pvar;
- char buf[256];
-
- va_start(pvar, fmt);
- vsprintf(buf, fmt, pvar);
- va_end(pvar);
-
- n = strlen(buf);
- if (linep + n + 1 > line + sizeof(line)) {
- syslog(LOG_DEBUG, "%s", line);
- linep = line;
+ struct notifier *np;
+
+ while ((np = notif) != 0) {
+ notif = np->next;
+ (*np->func)(np->arg, val);
}
- strcpy(linep, buf);
- linep += n;
}
-#else /* __STDC__ */
-#include <varargs.h>
+/*
+ * novm - log an error message saying we ran out of memory, and die.
+ */
+void
+novm(msg)
+ char *msg;
+{
+ fatal("Virtual memory exhausted allocating %s\n", msg);
+}
+/*
+ * script_setenv - set an environment variable value to be used
+ * for scripts that we run (e.g. ip-up, auth-up, etc.)
+ */
void
-pr_log(arg, fmt, va_alist)
-void *arg;
-char *fmt;
-va_dcl
+script_setenv(var, value, iskey)
+ char *var, *value;
+ int iskey;
{
- int n;
- va_list pvar;
- char buf[256];
-
- va_start(pvar);
- vsprintf(buf, fmt, pvar);
- va_end(pvar);
-
- n = strlen(buf);
- if (linep + n + 1 > line + sizeof(line)) {
- syslog(LOG_DEBUG, "%s", line);
- linep = line;
+ size_t varl = strlen(var);
+ size_t vl = varl + strlen(value) + 2;
+ int i;
+ char *p, *newstring;
+
+ newstring = (char *) malloc(vl+1);
+ if (newstring == 0)
+ return;
+ *newstring++ = iskey;
+ slprintf(newstring, vl, "%s=%s", var, value);
+
+ /* check if this variable is already set */
+ if (script_env != 0) {
+ for (i = 0; (p = script_env[i]) != 0; ++i) {
+ if (strncmp(p, var, varl) == 0 && p[varl] == '=') {
+#ifdef USE_TDB
+ if (p[-1] && pppdb != NULL)
+ delete_db_key(p);
+#endif
+ free(p-1);
+ script_env[i] = newstring;
+#ifdef USE_TDB
+ if (iskey && pppdb != NULL)
+ add_db_key(newstring);
+ update_db_entry();
+#endif
+ return;
+ }
+ }
+ } else {
+ /* no space allocated for script env. ptrs. yet */
+ i = 0;
+ script_env = (char **) malloc(16 * sizeof(char *));
+ if (script_env == 0)
+ return;
+ s_env_nalloc = 16;
+ }
+
+ /* reallocate script_env with more space if needed */
+ if (i + 1 >= s_env_nalloc) {
+ int new_n = i + 17;
+ char **newenv = (char **) realloc((void *)script_env,
+ new_n * sizeof(char *));
+ if (newenv == 0)
+ return;
+ script_env = newenv;
+ s_env_nalloc = new_n;
+ }
+
+ script_env[i] = newstring;
+ script_env[i+1] = 0;
+
+#ifdef USE_TDB
+ if (pppdb != NULL) {
+ if (iskey)
+ add_db_key(newstring);
+ update_db_entry();
}
- strcpy(linep, buf);
- linep += n;
-}
#endif
+}
/*
- * print_string - print a readable representation of a string using
- * printer.
+ * script_unsetenv - remove a variable from the environment
+ * for scripts.
*/
void
-print_string(p, len, printer, arg)
- char *p;
- int len;
- void (*printer) __P((void *, char *, ...));
- void *arg;
+script_unsetenv(var)
+ char *var;
{
- int c;
+ int vl = strlen(var);
+ int i;
+ char *p;
- printer(arg, "\"");
- for (; len > 0; --len) {
- c = *p++;
- if (' ' <= c && c <= '~')
- printer(arg, "%c", c);
- else
- printer(arg, "\\%.3o", c);
+ if (script_env == 0)
+ return;
+ for (i = 0; (p = script_env[i]) != 0; ++i) {
+ if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
+#ifdef USE_TDB
+ if (p[-1] && pppdb != NULL)
+ delete_db_key(p);
+#endif
+ free(p-1);
+ while ((script_env[i] = script_env[i+1]) != 0)
+ ++i;
+ break;
+ }
}
- printer(arg, "\"");
+#ifdef USE_TDB
+ if (pppdb != NULL)
+ update_db_entry();
+#endif
}
+#ifdef USE_TDB
/*
- * novm - log an error message saying we ran out of memory, and die.
+ * update_db_entry - update our entry in the database.
*/
-void
-novm(msg)
- char *msg;
+static void
+update_db_entry()
+{
+ TDB_DATA key, dbuf;
+ int vlen, i;
+ char *p, *q, *vbuf;
+
+ if (script_env == NULL)
+ return;
+ vlen = 0;
+ for (i = 0; (p = script_env[i]) != 0; ++i)
+ vlen += strlen(p) + 1;
+ vbuf = malloc(vlen);
+ if (vbuf == 0)
+ novm("database entry");
+ q = vbuf;
+ for (i = 0; (p = script_env[i]) != 0; ++i)
+ q += slprintf(q, vbuf + vlen - q, "%s;", p);
+
+ key.dptr = db_key;
+ key.dsize = strlen(db_key);
+ dbuf.dptr = vbuf;
+ dbuf.dsize = vlen;
+ if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
+ error("tdb_store failed: %s", tdb_error(pppdb));
+
+ if (vbuf)
+ free(vbuf);
+
+}
+
+/*
+ * add_db_key - add a key that we can use to look up our database entry.
+ */
+static void
+add_db_key(str)
+ const char *str;
+{
+ TDB_DATA key, dbuf;
+
+ key.dptr = (char *) str;
+ key.dsize = strlen(str);
+ dbuf.dptr = db_key;
+ dbuf.dsize = strlen(db_key);
+ if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
+ error("tdb_store key failed: %s", tdb_error(pppdb));
+}
+
+/*
+ * delete_db_key - delete a key for looking up our database entry.
+ */
+static void
+delete_db_key(str)
+ const char *str;
{
- syslog(LOG_ERR, "Virtual memory exhausted allocating %s\n", msg);
- die(1);
+ TDB_DATA key;
+
+ key.dptr = (char *) str;
+ key.dsize = strlen(str);
+ tdb_delete(pppdb, key);
+}
+
+/*
+ * cleanup_db - delete all the entries we put in the database.
+ */
+static void
+cleanup_db()
+{
+ TDB_DATA key;
+ int i;
+ char *p;
+
+ key.dptr = db_key;
+ key.dsize = strlen(db_key);
+ tdb_delete(pppdb, key);
+ for (i = 0; (p = script_env[i]) != 0; ++i)
+ if (p[-1])
+ delete_db_key(p);
}
+#endif /* USE_TDB */
projects / ppp.git / blobdiff