* OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#define RCSID "$Id: main.c,v 1.144 2004/11/09 22:35:02 paulus Exp $"
+#define RCSID "$Id: main.c,v 1.145 2004/11/12 10:30:51 paulus Exp $"
#include <stdio.h>
#include <ctype.h>
void (*snoop_send_hook) __P((unsigned char *p, int len)) = NULL;
static int conn_running; /* we have a [dis]connector running */
-static int devfd; /* fd of underlying device */
-static int fd_ppp = -1; /* fd for talking PPP */
static int fd_loop; /* fd for getting demand-dial packets */
-static int fd_devnull; /* fd for /dev/null */
+int fd_devnull; /* fd for /dev/null */
+int devfd = -1; /* fd of underlying device */
+int fd_ppp = -1; /* fd for talking PPP */
int phase; /* where the link is at */
int kill_link;
int open_ccp_flag;
int error_count;
+bool bundle_eof;
+bool bundle_terminating;
+
/*
* We maintain a list of child process pids and
* functions to call when they exit.
* Configure the interface and mark it up, etc.
*/
demand_conf();
- create_linkpidfile(getpid());
}
do_callback = 0;
for (;;) {
+ bundle_eof = 0;
+ bundle_terminating = 0;
listen_time = 0;
need_holdoff = 1;
devfd = -1;
info("Starting link");
}
- new_phase(PHASE_SERIALCONN);
-
- devfd = the_channel->connect();
- if (devfd < 0)
- goto fail;
-
- /* set up the serial device as a ppp interface */
-#ifdef USE_TDB
- tdb_writelock(pppdb);
-#endif
- fd_ppp = the_channel->establish_ppp(devfd);
- if (fd_ppp < 0) {
-#ifdef USE_TDB
- tdb_writeunlock(pppdb);
-#endif
- status = EXIT_FATAL_ERROR;
- goto disconnect;
- }
- /* create the pid file, now that we've obtained a ppp interface */
- if (!demand)
- create_linkpidfile(getpid());
-
- if (!demand && ifunit >= 0)
- set_ifunit(1);
-#ifdef USE_TDB
- tdb_writeunlock(pppdb);
-#endif
-
- /*
- * Start opening the connection and wait for
- * incoming events (reply, timeout, etc.).
- */
- if (ifunit >= 0)
- notice("Connect: %s <--> %s", ifname, ppp_devnam);
- else
- notice("Starting negotiation on %s", ppp_devnam);
gettimeofday(&start_time, NULL);
script_unsetenv("CONNECT_TIME");
script_unsetenv("BYTES_SENT");
script_unsetenv("BYTES_RCVD");
- lcp_lowerup(0);
- add_fd(fd_ppp);
lcp_open(0); /* Start protocol */
- status = EXIT_NEGOTIATION_FAILED;
- new_phase(PHASE_ESTABLISH);
while (phase != PHASE_DEAD) {
handle_events();
get_input();
- if (kill_link)
+ if (kill_link) {
+ bundle_terminating = 1;
lcp_close(0, "User request");
+ if (phase == PHASE_MASTER)
+ mp_bundle_terminated();
+ }
if (open_ccp_flag) {
if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
}
}
- print_link_stats();
-
- /*
- * Delete pid file before disestablishing ppp. Otherwise it
- * can happen that another pppd gets the same unit and then
- * we delete its pid file.
- */
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
- /*
- * If we may want to bring the link up again, transfer
- * the ppp unit back to the loopback. Set the
- * real serial device back to its normal mode of operation.
- */
- remove_fd(fd_ppp);
- clean_check();
- the_channel->disestablish_ppp(devfd);
- fd_ppp = -1;
- if (!hungup)
- lcp_lowerdown(0);
- if (!demand)
- script_unsetenv("IFNAME");
-
- /*
- * Run disconnector script, if requested.
- * XXX we may not be able to do this if the line has hung up!
- */
- disconnect:
- new_phase(PHASE_DISCONNECT);
- if (the_channel->disconnect)
- the_channel->disconnect();
-
- fail:
- if (the_channel->cleanup)
- (*the_channel->cleanup)();
-
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
if (!persist || (maxfail > 0 && unsuccess >= maxfail))
break;
}
}
-static void
+void
create_linkpidfile(pid)
int pid;
{
}
}
+/*
+ * remove_pidfile - remove our pid files
+ */
+void remove_pidfiles()
+{
+ if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", pidfilename);
+ pidfilename[0] = 0;
+ if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
+ warn("unable to delete pid file %s: %m", linkpidfile);
+ linkpidfile[0] = 0;
+}
+
/*
* holdoff_end - called via a timeout when the holdoff period ends.
*/
return;
if (len == 0) {
+ if (bundle_eof && multilink_master) {
+ notice("Last channel has disconnected");
+ mp_bundle_terminated();
+ return;
+ }
notice("Modem hangup");
hungup = 1;
status = EXIT_HANGUP;
die(status)
int status;
{
- print_link_stats();
+ if (!doing_multilink || multilink_master)
+ print_link_stats();
cleanup();
notify(exitnotify, status);
syslog(LOG_INFO, "Exit.");
the_channel->disestablish_ppp(devfd);
if (the_channel->cleanup)
(*the_channel->cleanup)();
-
- if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", linkpidfile);
- linkpidfile[0] = 0;
+ remove_pidfiles();
#ifdef USE_TDB
if (pppdb != NULL)
vlen = 0;
for (i = 0; (p = script_env[i]) != 0; ++i)
vlen += strlen(p) + 1;
- vbuf = malloc(vlen);
+ vbuf = malloc(vlen + 1);
if (vbuf == 0)
novm("database entry");
q = vbuf;
projects / ppp.git / blobdiff