]> git.ozlabs.org Git - ppp.git/blobdiff - include/net/ppp-comp.h
More copyright updates. The new CMU copyright notice is from CMU and
[ppp.git] / include / net / ppp-comp.h
index adab65cd3e02bd57b3fcc93bb45daf4b33fb1717..894bf12a8e630b6edf10c265f0e930dd9d5df3a3 100644 (file)
@@ -1,30 +1,38 @@
 /*
  * ppp-comp.h - Definitions for doing PPP packet compression.
  *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
+ * Copyright (c) 1984 Paul Mackerras. All rights reserved.
  *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
  *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
  *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
  *
- * $Id: ppp-comp.h,v 1.10 1996/09/26 06:30:11 paulus Exp $
+ * 3. The name(s) of the authors of this software must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission.
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by Paul Mackerras
+ *     <paulus@samba.org>".
+ *
+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * $Id: ppp-comp.h,v 1.13 2002/12/06 09:49:15 paulus Exp $
  */
 
 #ifndef _NET_PPP_COMP_H
@@ -141,7 +149,8 @@ struct compressor {
 /*
  * Definitions for Deflate.
  */
-#define CI_DEFLATE             24      /* config option for Deflate */
+#define CI_DEFLATE             26      /* config option for Deflate */
+#define CI_DEFLATE_DRAFT       24      /* value used in original draft RFC */
 #define CILEN_DEFLATE          4       /* length of its config option */
 
 #define DEFLATE_MIN_SIZE       8
@@ -153,6 +162,99 @@ struct compressor {
                                 + DEFLATE_METHOD_VAL)
 #define DEFLATE_CHK_SEQUENCE   0
 
+/*
+ * Definitions for MPPE.
+ */
+#define CI_MPPE                        18      /* config option for MPPE */
+#define CILEN_MPPE             6       /* length of config option */
+
+#define MPPE_PAD               4       /* MPPE growth per frame */
+#define MPPE_MAX_KEY_LEN       16      /* largest key length (128-bit) */
+
+/* option bits for ccp_options.mppe */
+#define MPPE_OPT_40            0x01    /* 40 bit */
+#define MPPE_OPT_128           0x02    /* 128 bit */
+#define MPPE_OPT_STATEFUL      0x04    /* stateful mode */
+/* unsupported opts */
+#define MPPE_OPT_56            0x08    /* 56 bit */
+#define MPPE_OPT_MPPC          0x10    /* MPPC compression */
+#define MPPE_OPT_D             0x20    /* Unknown */
+#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
+#define MPPE_OPT_UNKNOWN       0x40    /* Bits !defined in RFC 3078 were set */
+
+/*
+ * This is not nice ... the alternative is a bitfield struct though.
+ * And unfortunately, we cannot share the same bits for the option
+ * names above since C and H are the same bit.  We could do a u_int32
+ * but then we have to do a htonl() all the time and/or we still need
+ * to know which octet is which.
+ */
+#define MPPE_C_BIT             0x01    /* MPPC */
+#define MPPE_D_BIT             0x10    /* Obsolete, usage unknown */
+#define MPPE_L_BIT             0x20    /* 40-bit */
+#define MPPE_S_BIT             0x40    /* 128-bit */
+#define MPPE_M_BIT             0x80    /* 56-bit, not supported */
+#define MPPE_H_BIT             0x01    /* Stateless (in a different byte) */
+
+/* Does not include H bit; used for least significant octet only. */
+#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
+
+/* Build a CI from mppe opts (see RFC 3078) */
+#define MPPE_OPTS_TO_CI(opts, ci)              \
+    do {                                       \
+       u_char *ptr = ci; /* u_char[4] */       \
+                                               \
+       /* H bit */                             \
+       if (opts & MPPE_OPT_STATEFUL)           \
+           *ptr++ = 0x0;                       \
+       else                                    \
+           *ptr++ = MPPE_H_BIT;                \
+       *ptr++ = 0;                             \
+       *ptr++ = 0;                             \
+                                               \
+       /* S,L bits */                          \
+       *ptr = 0;                               \
+       if (opts & MPPE_OPT_128)                \
+           *ptr |= MPPE_S_BIT;                 \
+       if (opts & MPPE_OPT_40)                 \
+           *ptr |= MPPE_L_BIT;                 \
+       /* M,D,C bits not supported */          \
+    } while (/* CONSTCOND */ 0)
+
+/* The reverse of the above */
+#define MPPE_CI_TO_OPTS(ci, opts)              \
+    do {                                       \
+       u_char *ptr = ci; /* u_char[4] */       \
+                                               \
+       opts = 0;                               \
+                                               \
+       /* H bit */                             \
+       if (!(ptr[0] & MPPE_H_BIT))             \
+           opts |= MPPE_OPT_STATEFUL;          \
+                                               \
+       /* S,L bits */                          \
+       if (ptr[3] & MPPE_S_BIT)                \
+           opts |= MPPE_OPT_128;               \
+       if (ptr[3] & MPPE_L_BIT)                \
+           opts |= MPPE_OPT_40;                \
+                                               \
+       /* M,D,C bits */                        \
+       if (ptr[3] & MPPE_M_BIT)                \
+           opts |= MPPE_OPT_56;                \
+       if (ptr[3] & MPPE_D_BIT)                \
+           opts |= MPPE_OPT_D;                 \
+       if (ptr[3] & MPPE_C_BIT)                \
+           opts |= MPPE_OPT_MPPC;              \
+                                               \
+       /* Other bits */                        \
+       if (ptr[0] & ~MPPE_H_BIT)               \
+           opts |= MPPE_OPT_UNKNOWN;           \
+       if (ptr[1] || ptr[2])                   \
+           opts |= MPPE_OPT_UNKNOWN;           \
+       if (ptr[3] & ~MPPE_ALL_BITS)            \
+           opts |= MPPE_OPT_UNKNOWN;           \
+    } while (/* CONSTCOND */ 0)
+
 /*
  * Definitions for other, as yet unsupported, compression methods.
  */