* OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
* OR MODIFICATIONS.
*
- * From: ppp-comp.h,v 1.7 1995/05/01 01:43:37 paulus Exp
+ * $Id: ppp-comp.h,v 1.9 2002/04/02 13:54:59 dfs Exp $
*/
/*
- * ==FILEVERSION 960302==
+ * ==FILEVERSION 20020319==
*
* NOTE TO MAINTAINERS:
* If you modify this file at all, please set the above date.
#ifndef DO_BSD_COMPRESS
#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */
#endif
-
+#ifndef DO_DEFLATE
+#define DO_DEFLATE 1 /* by default, include Deflate */
+#endif
#define DO_PREDICTOR_1 0
#define DO_PREDICTOR_2 0
-#define DO_DEFLATE 0
/*
* Structure giving methods for compression/decompression.
*/
-#ifdef PACKETPTR
struct compressor {
int compress_proto; /* CCP compression protocol number */
/* Return decompression statistics */
void (*decomp_stat) (void *state, struct compstat *stats);
};
-#endif /* PACKETPTR */
/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
+ * The return value from decompress routine is the length of the
+ * decompressed packet if successful, otherwise DECOMP_ERROR
+ * or DECOMP_FATALERROR if an error occurred.
+ *
+ * We need to make this distinction so that we can disable certain
* useful functionality, namely sending a CCP reset-request as a result
* of an error detected after decompression. This is to avoid infringing
* a patent held by Motorola.
* Don't you just lurve software patents.
*/
-#define DECOMP_OK 0 /* everything went OK */
-#define DECOMP_ERROR 1 /* error detected before decomp. */
-#define DECOMP_FATALERROR 2 /* error detected after decomp. */
+#define DECOMP_ERROR -1 /* error detected before decomp. */
+#define DECOMP_FATALERROR -2 /* error detected after decomp. */
/*
* CCP codes.
#define BSD_MAX_BITS 15 /* largest code size supported */
/*
- * Definitions for other, as yet unsupported, compression methods.
+ * Definitions for Deflate.
*/
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#define CI_DEFLATE 24 /* config option for Deflate */
+#define CI_DEFLATE 26 /* config option for Deflate */
+#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
#define CILEN_DEFLATE 4 /* length of its config option */
#define DEFLATE_MIN_SIZE 8
+ DEFLATE_METHOD_VAL)
#define DEFLATE_CHK_SEQUENCE 0
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE 18 /* config option for MPPE */
+#define CILEN_MPPE 6 /* length of config option */
+
+#define MPPE_PAD 4 /* MPPE growth per frame */
+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */
+
+/* option bits for ccp_options.mppe */
+#define MPPE_OPT_40 0x01 /* 40 bit */
+#define MPPE_OPT_128 0x02 /* 128 bit */
+#define MPPE_OPT_STATEFUL 0x04 /* stateful mode */
+/* unsupported opts */
+#define MPPE_OPT_56 0x08 /* 56 bit */
+#define MPPE_OPT_MPPC 0x10 /* MPPC compression */
+#define MPPE_OPT_D 0x20 /* Unknown */
+#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
+#define MPPE_OPT_UNKNOWN 0x40 /* Bits !defined in RFC 3078 were set */
+
+/*
+ * This is not nice ... the alternative is a bitfield struct though.
+ * And unfortunately, we cannot share the same bits for the option
+ * names above since C and H are the same bit. We could do a u_int32
+ * but then we have to do a htonl() all the time and/or we still need
+ * to know which octet is which.
+ */
+#define MPPE_C_BIT 0x01 /* MPPC */
+#define MPPE_D_BIT 0x10 /* Obsolete, usage unknown */
+#define MPPE_L_BIT 0x20 /* 40-bit */
+#define MPPE_S_BIT 0x40 /* 128-bit */
+#define MPPE_M_BIT 0x80 /* 56-bit, not supported */
+#define MPPE_H_BIT 0x01 /* Stateless (in a different byte) */
+
+/* Does not include H bit; used for least significant octet only. */
+#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
+
+/* Build a CI from mppe opts (see RFC 3078) */
+#define MPPE_OPTS_TO_CI(opts, ci) \
+ do { \
+ u_char *ptr = ci; /* u_char[4] */ \
+ \
+ /* H bit */ \
+ if (opts & MPPE_OPT_STATEFUL) \
+ *ptr++ = 0x0; \
+ else \
+ *ptr++ = MPPE_H_BIT; \
+ *ptr++ = 0; \
+ *ptr++ = 0; \
+ \
+ /* S,L bits */ \
+ *ptr = 0; \
+ if (opts & MPPE_OPT_128) \
+ *ptr |= MPPE_S_BIT; \
+ if (opts & MPPE_OPT_40) \
+ *ptr |= MPPE_L_BIT; \
+ /* M,D,C bits not supported */ \
+ } while (/* CONSTCOND */ 0)
+
+/* The reverse of the above */
+#define MPPE_CI_TO_OPTS(ci, opts) \
+ do { \
+ u_char *ptr = ci; /* u_char[4] */ \
+ \
+ opts = 0; \
+ \
+ /* H bit */ \
+ if (!(ptr[0] & MPPE_H_BIT)) \
+ opts |= MPPE_OPT_STATEFUL; \
+ \
+ /* S,L bits */ \
+ if (ptr[3] & MPPE_S_BIT) \
+ opts |= MPPE_OPT_128; \
+ if (ptr[3] & MPPE_L_BIT) \
+ opts |= MPPE_OPT_40; \
+ \
+ /* M,D,C bits */ \
+ if (ptr[3] & MPPE_M_BIT) \
+ opts |= MPPE_OPT_56; \
+ if (ptr[3] & MPPE_D_BIT) \
+ opts |= MPPE_OPT_D; \
+ if (ptr[3] & MPPE_C_BIT) \
+ opts |= MPPE_OPT_MPPC; \
+ \
+ /* Other bits */ \
+ if (ptr[0] & ~MPPE_H_BIT) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ if (ptr[1] || ptr[2]) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ if (ptr[3] & ~MPPE_ALL_BITS) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ } while (/* CONSTCOND */ 0)
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1 2 /* length of its config option */
+#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2 2 /* length of its config option */
+
+#ifdef __KERNEL__
+extern int ppp_register_compressor(struct compressor *);
+extern void ppp_unregister_compressor(struct compressor *);
+#endif /* __KERNEL__ */
+
#endif /* _NET_PPP_COMP_H */
projects / ppp.git / blobdiff