-PPP for Linux Version 2.3.9
+PPP for Linux Version 2.4.0
============= based on
- ppp-2.3.9
- July 1999
+ ppp-2.4.0
+ April 2000
Paul Mackerras Paul.Mackerras@cs.anu.edu.au
Al Longyear longyear@netcom.com
addresses.
+USING THE NEW PPP KERNEL DRIVER
+
+As of kernel version 2.3.13, the development series of kernels contain
+a new kernel PPP driver, rewritten from scratch by Paul Mackerras.
+This package supports the new driver, although it doesn't include the
+source for the new driver.
+
+The new driver is divided into two files: ppp_generic.c and
+ppp_async.c. If you compile PPP as a module, you will get two
+separate modules, called ppp_generic and ppp_async.
+Another module ppp_synctty is used for synchronous tty devices
+such as high-speed WAN adapters for leased T1/E1 lines.
+
+To talk to the new driver, pppd needs to be able to open /dev/ppp,
+character device (108,0). If you are using devfs, the device
+filesystem, the /dev/ppp node will automagically appear when the
+ppp_generic module is loaded, or at startup if ppp_generic is compiled
+in.
+
+If you have ppp_generic as a module, and you are using devfsd (the
+devfs daemon), you will need to add a line like this to your
+/etc/devfsd.conf:
+
+LOOKUP ppp MODLOAD
+
+Otherwise you will need to create a /dev/ppp device node with the
+commands:
+
+# mknod /dev/ppp c 108 0
+# chmod 600 /dev/ppp
+
+If you use module autoloading and have PPP as a module, you will need
+to add the following to your /etc/modules.conf or /etc/conf.modules:
+
+/dev/ppp ppp_generic
+alias char-major-108 ppp_generic
+alias tty-ldisc-3 ppp_async
+alias tty-ldisc-14 ppp_synctty
+
+
INSTALLATION
This version of PPP has been tested on various Linux kernel versions
-(most recently 2.0.36 and 2.2.8). It will not work on kernels before
-2.0.0. If you have an earlier kernel, please upgrade to the latest 2.0
-or 2.2 kernel.
+(most recently 2.2.14). It will not work on kernels before 2.2.0. If
+you have an earlier kernel, please upgrade to the latest 2.2-series
+kernel.
joining the PPP channel of linux-activists:
2. Update the kernel sources.
-The 2.2.8 kernel contains the same PPP kernel driver as is in this
-release. In fact the driver in the kernel sources is slightly
+The 2.2.8 and later kernels contains the same PPP kernel driver as is
+in this release. In fact the driver in the kernel sources is slightly
different from the one in this package as it doesn't include the stuff
which enables the driver in this package to compile in either the 2.0
or 2.2 kernel environment, but the two are functionally equivalent.
-If you are using a 2.2.8 kernel and your kernel is already configured
-for PPP, then you only need to do steps 5 and 6. Otherwise, continue
-at step 3.
+If you are using a 2.2.8 or later kernel and your kernel is already
+configured for PPP, then you only need to do steps 5 and 6.
+Otherwise, continue at step 3.
+
+If you are using a 2.3 series kernel, use the kernel driver that is in
+the kernel sources. For 2.3.13 and later, this is the new driver (see
+above).
If you are using a kernel earlier than 2.2.8, you can either use the
-driver in this package or upgrade your kernel to 2.2.8. If you choose
+driver in this package or upgrade your kernel to the current 2.2.x
+series kernel (2.2.13, as of the release of ppp-2.3.11). If you choose
to use the driver in this package, you will need a copy of the kernel
source tree to compile the driver. Issue the command:
projects / ppp.git / blobdiff