*/
#ifndef lint
-static char rcsid[] = "$Id: sys-NeXT.c,v 1.4 1996/01/01 23:03:23 paulus Exp $";
+static char rcsid[] = "$Id: sys-NeXT.c,v 1.8 1997/04/30 05:57:14 paulus Exp $";
#endif
#include <stdio.h>
static int initdisc = -1; /* Initial TTY discipline */
static int initfdflags = -1; /* Initial file descriptor flags for fd */
+static int ppp_fd = -1; /* fd which is set to PPP discipline */
+static int loop_slave = -1;
+static int loop_master;
+static char loop_name[20];
extern int errno;
{
openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
setlogmask(LOG_UPTO(LOG_INFO));
- if (debug)
- setlogmask(LOG_UPTO(LOG_DEBUG));
/* Get an internet socket for doing socket ioctl's on. */
if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
}
if (default_route_gateway)
- cifdefaultroute(0, default_route_gateway);
+ cifdefaultroute(0, 0, default_route_gateway);
if (proxy_arp_addr)
cifproxyarp(0, proxy_arp_addr);
}
{
int s, ok;
struct ifreq ifr;
+ extern char *no_ppp_msg;
if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
return 1; /* can't tell - maybe we're not root */
ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
close(s);
+ no_ppp_msg = "\
+This system lacks kernel support for PPP. To include PPP support\n\
+in the kernel, please follow the steps detailed in the README.NeXT\n\
+file in the ppp-2.2 distribution.\n";
+
return ok;
}
}
/*
- * Set device for non-blocking reads.
+ * Set device for non-blocking reads so PPPD can poll for
+ * input from the kernel.
*/
if ((initfdflags = fcntl(fd, F_GETFL)) == -1
|| fcntl(fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
syslog(LOG_WARNING, "Couldn't set device to non-blocking mode: %m");
}
+
}
disestablish_ppp(fd)
int fd;
{
- int x;
- char *s;
-
- /* Reset non-blocking mode on the file descriptor. */
+ /* Reset non-blocking mode on fd. */
if (initfdflags != -1 && fcntl(fd, F_SETFL, initfdflags) < 0)
syslog(LOG_WARNING, "Couldn't restore device fd flags: %m");
initfdflags = -1;
- if (initdisc >= 0) {
- /*
- * Check whether the link seems not to be 8-bit clean.
- */
- if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
- s = NULL;
- switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
- case SC_RCV_B7_0:
- s = "bit 7 set to 1";
- break;
- case SC_RCV_B7_1:
- s = "bit 7 set to 0";
- break;
- case SC_RCV_EVNP:
- s = "odd parity";
- break;
- case SC_RCV_ODDP:
- s = "even parity";
- break;
- }
- if (s != NULL) {
- syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
- syslog(LOG_WARNING, "All received characters had %s", s);
- }
+ /* Restore old line discipline. */
+ if (initdisc >= 0 && ioctl(fd, TIOCSETD, &initdisc) < 0)
+ syslog(LOG_ERR, "ioctl(TIOCSETD): %m");
+ initdisc = -1;
+}
+
+/*
+ * Check whether the link seems not to be 8-bit clean.
+ */
+void
+clean_check()
+{
+ int x;
+ char *s;
+
+ if (ioctl(ttyfd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
+ s = NULL;
+ switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
+ case SC_RCV_B7_0:
+ s = "bit 7 set to 1";
+ break;
+ case SC_RCV_B7_1:
+ s = "bit 7 set to 0";
+ break;
+ case SC_RCV_EVNP:
+ s = "odd parity";
+ break;
+ case SC_RCV_ODDP:
+ s = "even parity";
+ break;
+ }
+ if (s != NULL) {
+ syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
+ syslog(LOG_WARNING, "All received characters had %s", s);
}
- if (ioctl(fd, TIOCSETD, &initdisc) < 0)
- syslog(LOG_ERR, "ioctl(disestablish TIOCSETD): %m");
}
}
cfsetispeed(&tios, speed);
} else {
speed = cfgetospeed(&tios);
+ /*
+ * We can't proceed if the serial port speed is B0,
+ * since that implies that the serial port is disabled.
+ */
+ if (speed == B0) {
+ syslog(LOG_ERR, "Baud rate for %s is 0; need explicit baud rate",
+ devnam);
+ die(1);
+ }
}
if (modem) {
int len;
{
if (debug)
- log_packet(p, len, "sent ");
+ log_packet(p, len, "sent ", LOG_DEBUG);
if (write(ttyfd, p, len) < 0) {
if (errno == EWOULDBLOCK || errno == ENOBUFS
rv = 1;
npi.protocol = PPP_IP;
npi.mode = NPMODE_ERROR;
- if (ioctl(ttyfd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
- if (errno != ENOTTY) {
- syslog(LOG_ERR, "ioctl(PPPIOCSNPMODE): %m");
- rv = 0;
- } else {
- /* backwards compatibility */
- if (ioctl(ttyfd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
- syslog(LOG_ERR, "ioctl (PPPIOCGFLAGS): %m");
- rv = 0;
- } else {
- x &= ~SC_ENABLE_IP;
- if (ioctl(ttyfd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
- syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
- rv = 0;
- }
- }
- }
- }
+ ioctl(ttyfd, PPPIOCSNPMODE, (caddr_t) &npi);
+ /* ignore errors, because ttyfd might have been closed by now. */
+
strncpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
if (ioctl(sockfd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
* sifdefaultroute - assign a default route through the address given.
*/
int
-sifdefaultroute(u, g)
+sifdefaultroute(u, l, g)
int u;
- u_int32_t g;
+ u_int32_t l, g;
{
return dodefaultroute(g, 's');
}
* cifdefaultroute - delete a default route through the address given.
*/
int
-cifdefaultroute(u, g)
+cifdefaultroute(u, l, g)
int u;
- u_int32_t g;
+ u_int32_t l, g;
{
return dodefaultroute(g, 'c');
}
#define WTMPFILE "/usr/adm/wtmp"
-int
+void
logwtmp(line, name, host)
- char *line, *name, *host;
+ const char *line, *name, *host;
{
int fd;
struct stat buf;
}
#endif
+
+
+/*
+ * Code following is added for 2.3 compatibility
+ */
+
+/*
+ * get_idle_time - return how long the link has been idle.
+ */
+int
+get_idle_time(u, ip)
+ int u;
+ struct ppp_idle *ip;
+{
+ return (ioctl(ttyfd, PPPIOCGIDLE, ip) >= 0);
+}
+
+
+/*
+ * get_loop_output - read characters from the loopback, form them
+ * into frames, and detect when we want to bring the real link up.
+ * Return value is 1 if we need to bring up the link, 0 otherwise.
+ */
+int
+get_loop_output()
+{
+
+#if 0
+ int rv = 0;
+ int n;
+
+ while ((n = read(loop_master, inbuf, sizeof(inbuf))) >= 0) {
+ if (loop_chars(inbuf, n))
+ rv = 1;
+ }
+
+ if (n == 0) {
+ syslog(LOG_ERR, "eof on loopback");
+ die(1);
+ } else if (errno != EWOULDBLOCK){
+ syslog(LOG_ERR, "read from loopback: %m");
+ die(1);
+ }
+
+ return rv;
+#endif
+
+ return 0;
+}
+
+/*
+ * sifnpmode - Set the mode for handling packets for a given NP.
+ */
+int
+sifnpmode(u, proto, mode)
+ int u;
+ int proto;
+ enum NPmode mode;
+{
+ struct npioctl npi;
+
+ npi.protocol = proto;
+ npi.mode = mode;
+ if (ioctl(ttyfd, PPPIOCSNPMODE, &npi) < 0) {
+ syslog(LOG_ERR, "ioctl(set NP %d mode to %d): %m", proto, mode);
+ return 0;
+ }
+ return 1;
+}
+
+
+/*
+ * open_ppp_loopback - open the device we use for getting
+ * packets in demand mode, and connect it to a ppp interface.
+ * Here we use a pty.
+ */
+void
+open_ppp_loopback()
+{
+
+#if 0
+ int flags;
+ struct termios tios;
+ int pppdisc = PPPDISC;
+
+ syslog(LOG_ERR, "open_ppp_loopback called!");
+ die(1);
+
+ if (openpty(&loop_master, &loop_slave, loop_name, NULL, NULL) < 0) {
+ syslog(LOG_ERR, "No free pty for loopback");
+ die(1);
+ }
+ SYSDEBUG((LOG_DEBUG, "using %s for loopback", loop_name));
+
+ if (tcgetattr(loop_slave, &tios) == 0) {
+ tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
+ tios.c_cflag |= CS8 | CREAD;
+ tios.c_iflag = IGNPAR;
+ tios.c_oflag = 0;
+ tios.c_lflag = 0;
+ if (tcsetattr(loop_slave, TCSAFLUSH, &tios) < 0)
+ syslog(LOG_WARNING, "couldn't set attributes on loopback: %m");
+ }
+
+ if ((flags = fcntl(loop_master, F_GETFL)) != -1)
+ if (fcntl(loop_master, F_SETFL, flags | O_NONBLOCK) == -1)
+ syslog(LOG_WARNING, "couldn't set loopback to nonblock: %m");
+
+ ttyfd = loop_slave;
+ if (ioctl(ttyfd, TIOCSETD, &pppdisc) < 0) {
+ syslog(LOG_ERR, "ioctl(TIOCSETD): %m");
+ die(1);
+ }
+
+ /*
+ * Find out which interface we were given.
+ */
+ if (ioctl(ttyfd, PPPIOCGUNIT, &ifunit) < 0) {
+ syslog(LOG_ERR, "ioctl(PPPIOCGUNIT): %m");
+ die(1);
+ }
+
+ /*
+ * Enable debug in the driver if requested.
+ */
+ if (kdebugflag) {
+ if (ioctl(ttyfd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
+ syslog(LOG_WARNING, "ioctl (PPPIOCGFLAGS): %m");
+ } else {
+ flags |= (kdebugflag & 0xFF) * SC_DEBUG;
+ if (ioctl(ttyfd, PPPIOCSFLAGS, (caddr_t) &flags) < 0)
+ syslog(LOG_WARNING, "ioctl(PPPIOCSFLAGS): %m");
+ }
+ }
+
+#endif
+
+}
+
+/*
+ * restore_loop - reattach the ppp unit to the loopback.
+ */
+void
+restore_loop()
+{
+ int x;
+
+ /*
+ * Transfer the ppp interface back to the loopback.
+ */
+ if (ioctl(ttyfd, PPPIOCXFERUNIT, 0) < 0) {
+ syslog(LOG_ERR, "ioctl(transfer ppp unit): %m");
+ die(1);
+ }
+ x = PPPDISC;
+ if (ioctl(loop_slave, TIOCSETD, &x) < 0) {
+ syslog(LOG_ERR, "ioctl(TIOCSETD): %m");
+ die(1);
+ }
+
+ /*
+ * Check that we got the same unit again.
+ */
+ if (ioctl(loop_slave, PPPIOCGUNIT, &x) < 0) {
+ syslog(LOG_ERR, "ioctl(PPPIOCGUNIT): %m");
+ die(1);
+ }
+ if (x != ifunit) {
+ syslog(LOG_ERR, "transfer_ppp failed: wanted unit %d, got %d",
+ ifunit, x);
+ die(1);
+ }
+ ttyfd = loop_slave;
+}
+
+
+/*
+ * sys_check_options - check the options that the user specified
+ */
+void
+sys_check_options()
+{
+ /*
+ * We don't support demand dialing yet.
+ */
+ if(demand)
+ {
+ syslog(LOG_WARNING, "PPP-2.3 for NeXTSTEP does not yet support demand dialing\n");
+ demand = 0;
+ }
+}
+
+
+/*
+ * sys_close - Clean up in a child process before execing.
+ */
+void
+sys_close()
+{
+ close(sockfd);
+ if (loop_slave >= 0) {
+ close(loop_slave);
+ close(loop_master);
+ }
+ closelog();
+}
+
+
+/*
+ * wait_loop_output - wait until there is data available on the
+ * loopback, for the length of time specified by *timo (indefinite
+ * if timo is NULL).
+ */
+void wait_loop_output(timo)
+ struct timeval *timo;
+{
+ fd_set ready;
+ int n;
+
+ FD_ZERO(&ready);
+ FD_SET(loop_master, &ready);
+ n = select(loop_master + 1, &ready, NULL, &ready, timo);
+ if (n < 0 && errno != EINTR) {
+ syslog(LOG_ERR, "select: %m");
+ die(1);
+ }
+}
+
+
+/*
+ * wait_time - wait for a given length of time or until a
+ * signal is received.
+ */
+void wait_time(timo)
+ struct timeval *timo;
+{
+ int n;
+
+ n = select(0, NULL, NULL, NULL, timo);
+ if (n < 0 && errno != EINTR) {
+ syslog(LOG_ERR, "select: %m");
+ die(1);
+ }
+}