+ int x;
+ char *s;
+
+ if (initdisc >= 0) {
+ /*
+ * Check whether the link seems not to be 8-bit clean.
+ */
+ if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
+ s = NULL;
+ switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
+ case SC_RCV_B7_0:
+ s = "bit 7 set to 1";
+ break;
+ case SC_RCV_B7_1:
+ s = "bit 7 set to 0";
+ break;
+ case SC_RCV_EVNP:
+ s = "odd parity";
+ break;
+ case SC_RCV_ODDP:
+ s = "even parity";
+ break;
+ }
+ if (s != NULL) {
+ syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
+ syslog(LOG_WARNING, "All received characters had %s", s);
+ }
+ }
+ if (ioctl(fd, TIOCSETD, &initdisc) < 0)
+ syslog(LOG_ERR, "ioctl(TIOCSETD): %m");
+ }
+}
+
+
+/*
+ * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
+ * at the requested speed, etc. If `local' is true, set CLOCAL
+ * regardless of whether the modem option was specified.
+ *
+ * For *BSD, we assume that speed_t values numerically equal bits/second.
+ */
+set_up_tty(fd, local)
+ int fd, local;
+{
+ struct termios tios;
+
+ if (tcgetattr(fd, &tios) < 0) {
+ syslog(LOG_ERR, "tcgetattr: %m");
+ die(1);
+ }
+
+ if (!restore_term)
+ inittermios = tios;
+
+ tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
+ if (crtscts > 0)
+ tios.c_cflag |= CRTSCTS;
+ else if (crtscts < 0)
+ tios.c_cflag &= ~CRTSCTS;
+
+ tios.c_cflag |= CS8 | CREAD | HUPCL;
+ if (local || !modem)
+ tios.c_cflag |= CLOCAL;
+ tios.c_iflag = IGNBRK | IGNPAR;
+ tios.c_oflag = 0;
+ tios.c_lflag = 0;
+ tios.c_cc[VMIN] = 1;
+ tios.c_cc[VTIME] = 0;
+
+ if (crtscts == 2) {
+ tios.c_iflag |= IXOFF;
+ tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
+ tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
+ }
+
+ if (inspeed) {
+ cfsetospeed(&tios, inspeed);
+ cfsetispeed(&tios, inspeed);
+ } else {
+ inspeed = cfgetospeed(&tios);
+ /*
+ * We can't proceed if the serial port speed is 0,
+ * since that implies that the serial port is disabled.
+ */
+ if (inspeed == 0) {
+ syslog(LOG_ERR, "Baud rate for %s is 0; need explicit baud rate",
+ devnam);
+ die(1);
+ }
+ }
+ baud_rate = inspeed;
+
+ if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
+ syslog(LOG_ERR, "tcsetattr: %m");
+ die(1);
+ }
+
+ restore_term = 1;
+}
+
+/*
+ * restore_tty - restore the terminal to the saved settings.
+ */
+void
+restore_tty()
+{
+ if (restore_term) {
+ if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
+ if (errno != ENXIO)
+ syslog(LOG_WARNING, "tcsetattr: %m");
+ restore_term = 0;
+ }
+}
+
+/*
+ * setdtr - control the DTR line on the serial port.
+ * This is called from die(), so it shouldn't call die().
+ */
+setdtr(fd, on)
+int fd, on;
+{
+ int modembits = TIOCM_DTR;
+
+ ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);