Add 'remotenumber' and 'allow-number' options, for CNID purposes.

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index f6adc5daf2767ffff5ffe651aec596e33accab36..91ea477be53821ae787725acf8e3ed587c7ecf40 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -1,5 +1,5 @@
 .\" manual page [] for pppd 2.4
 .\" manual page [] for pppd 2.4

-.\" $Id: pppd.8,v 1.61 2002/03/05 15:14:04 dfs Exp $
+.\" $Id: pppd.8,v 1.66 2002/10/10 05:47:34 fcusack Exp $

 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph
 .\" SH section heading
 .\" SS subsection heading
 .\" LP paragraph


@@ -191,7 +191,7 @@ except that qualifiers which are inappropriate for a PPP link, such as
 \fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
 expression should be enclosed in single-quotes to prevent whitespace
 in the expression from being interpreted by the shell. This option
 \fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
 expression should be enclosed in single-quotes to prevent whitespace
 in the expression from being interpreted by the shell. This option

-is currently only available under NetBSD, and then only
+is currently only available under NetBSD or Linux, and then only

 if both the kernel and pppd were compiled with PPP_FILTER defined.
 .TP
 .B allow-ip \fIaddress(es)
 if both the kernel and pppd were compiled with PPP_FILTER defined.
 .TP
 .B allow-ip \fIaddress(es)


@@ -200,6 +200,10 @@ authenticating themselves.  The parameter is parsed as for each
 element of the list of allowed IP addresses in the secrets files (see
 the AUTHENTICATION section below).
 .TP
 element of the list of allowed IP addresses in the secrets files (see
 the AUTHENTICATION section below).
 .TP

+.B allow-number \fInumber
+Allow peers to connect from the given telephone number.  A trailing
+`*' character will match all numbers beginning with the leading part.
+.TP

 .B bsdcomp \fInr,nt
 Request that the peer compress packets that it sends, using the
 BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and
 .B bsdcomp \fInr,nt
 Request that the peer compress packets that it sends, using the
 BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and


@@ -561,6 +565,10 @@ control, as for the \fIcrtscts\fR option.
 Enables the use of PPP multilink; this is an alias for the `multilink'
 option.  This option is currently only available under Linux.
 .TP
 Enables the use of PPP multilink; this is an alias for the `multilink'
 option.  This option is currently only available under Linux.
 .TP

+.B mppe-stateful
+Allow MPPE to use stateful mode.  Stateless mode is still attempted first.
+The default is to disallow stateful mode.  
+.TP

 .B mpshortseq
 Enables the use of short (12-bit) sequence numbers in multilink
 headers, as opposed to 24-bit sequence numbers.  This option is only
 .B mpshortseq
 Enables the use of short (12-bit) sequence numbers in multilink
 headers, as opposed to 24-bit sequence numbers.  This option is only


@@ -703,6 +711,18 @@ peer is buggy.
 Disables the use of PPP multilink.  This option is currently only
 available under Linux.
 .TP
 Disables the use of PPP multilink.  This option is currently only
 available under Linux.
 .TP

+.B nomppe
+Disables MPPE (Microsoft Point to Point Encryption).  This is the default.
+.TP
+.B nomppe-40
+Disable 40\-bit encryption with MPPE.
+.TP
+.B nomppe-128
+Disable 128\-bit encryption with MPPE.
+.TP
+.B nomppe-stateful
+Disable MPPE stateful mode.  This is the default.
+.TP

 .B nompshortseq
 Disables the use of short (12-bit) sequence numbers in the PPP
 multilink protocol, forcing the use of 24-bit sequence numbers.  This
 .B nompshortseq
 Disables the use of short (12-bit) sequence numbers in the PPP
 multilink protocol, forcing the use of 24-bit sequence numbers.  This


@@ -849,6 +869,10 @@ displayed in readable form using the pppdump(8) program.
 Set the assumed name of the remote system for authentication purposes
 to \fIname\fR.
 .TP
 Set the assumed name of the remote system for authentication purposes
 to \fIname\fR.
 .TP

+.B remotenumber \fInumber
+Set the assumed telephone number of the remote system for authentication
+purposes to \fInumber\fR.
+.TP

 .B refuse-chap
 With this option, pppd will not agree to authenticate itself to the
 peer using CHAP.
 .B refuse-chap
 With this option, pppd will not agree to authenticate itself to the
 peer using CHAP.


@@ -869,6 +893,20 @@ peer using PAP.
 Require the peer to authenticate itself using CHAP [Challenge
 Handshake Authentication Protocol] authentication.
 .TP
 Require the peer to authenticate itself using CHAP [Challenge
 Handshake Authentication Protocol] authentication.
 .TP

+.B require-mppe
+Require the use of MPPE (Microsoft Point to Point Encryption).  This
+option disables all other compression types.  This option enables
+both 40\-bit and 128\-bit encryption.  In order for MPPE to successfully
+come up, you must have authenticated with either MS-CHAP or MS-CHAPv2.
+This option is presently only supported under Linux, and only if your
+kernel has been configured to include MPPE support.
+.TP
+.B require-mppe-40
+Require the use of MPPE, with 40\-bit encryption.
+.TP
+.B require-mppe-128
+Require the use of MPPE, with 128\-bit encryption.
+.TP

 .B require-mschap
 Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
 Handshake Authentication Protocol] authentication.
 .B require-mschap
 Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
 Handshake Authentication Protocol] authentication.