-* Support for the new generic PPP layer under development for the
- Linux kernel.
-
-* You can now place extra options to apply to specific users at the
- end of the line with their password in the pap-secrets or
- chap-secrets file, separated from the IP address(es) with a "--"
- separator. These options are parsed after the peer is authenticated
- but before network protocol (IPCP, IPXCP) or CCP negotiation
- commences.
-
-* Pppd will apply the holdoff period if the link was terminated by the
- peer. It doesn't apply it if the link was terminated because the
- local pppd thought it was idle.
-
-* The `nodefaultip' option can be used in demand mode to say that pppd
- should not suggest its local IP address to the peer.
-
-* The `init' option has been added; this causes pppd to run a script
- to initialize the serial device (e.g. by sending an init string to
- the modem). Unlike the connect option, this can be used in a
- dial-in situation. (Thanks to Tobias Ringstrom.)
-
-* There is a new `logfile' option to send log messages to a file as
- well as syslog.
-
-* Sundry bugs fixed.
-
-
-What was new in ppp-2.3.8.
-**************************
-
-* The exit status of pppd will now indicate whether the link was
- successfully established, or if not, what error was encountered.
-
-* Pppd has two new options: fdlog <n> will send log messages to file
- descriptor <n> instead of standard output, and nofdlog will stop log
- messages from being sent to any file descriptor (they will still be
- sent to syslog). Pppd now will not send log messages to a file
- descriptor if the serial port is open on that file descriptor.
-
-* Pppd sets an environment variable called PPPLOGNAME for scripts that
- it runs, indicating the login name of the user who invoked pppd.
-
-* Pppd sets environment variables CONNECT_TIME, BYTES_SENT and
- BYTES_RCVD for the ip-down and auth-down scripts indicating the
- statistics for the connection just terminated. (CONNECT_TIME is in
- seconds.)
-
-* If the user has the serial device open on standard input and
- specifies a symbolic link to the serial device on the command line,
- pppd will detect this and behave correctly (i.e. not detach from its
- controlling terminal). Furthermore, if the serial port is open for
- reading and writing on standard input, pppd will assume that it is
- locked by its invoker and not lock it itself.
-
-* Chat now has a feature where if a string to be sent begins with an
- at sign (@), the rest of the string is taken as the name of a file
- (regular file or named pipe), and the actual string to send is taken
- from that file.
-
-* Support for FreeBSD-2.2.8 and 3.0 has been added, thanks to Paul
- Fulghum.
-
-* The Tru64 (aka Digital Unix aka OSF/1) port has been updated.
-
-* The system panics on Solaris SMP systems related to PPP connections
- being established and terminated should no longer occur.
-
-* Fixed quite a few bugs.
-
-
-What was new in ppp-2.3.7.
-**************************
-
-* Pppd can now automatically allocate itself a pseudo-tty to use as
- the serial device. This has made three new options possible:
-
- - `pty script' will run `script' with its standard input and output
- connected to the master side of the pty. For example:
- pppd pty 'ssh -t server.my.net pppd'
- is a basic command for setting up a PPP link (tunnel) over ssh.
- (In practice you may need to specify other options such as IP
- addresses, etc.)
-
- - `notty' tells pppd to communicate over its standard input and
- output, which do not have to be a terminal device.
-
- - `record filename' tells pppd to record all of the characters sent
- and received over the serial device to a file called `filename'.
- The data is recorded in a tagged format with timestamps, which can
- be printed in a readable form with the pppdump program, which is
- included in this distribution.
-
-* Pppd now logs the connect time and number of bytes sent and received
- (at the level of the serial device) when the connection is
- terminated.
-
-* If you use the updetach or nodetach option, pppd will print its
- messages to standard output as well as logging them with syslog
- (provided of course pppd isn't using its standard input or output as
- its serial device).
-
-* There is a new `privgroup groupname' option (a privileged option).
- If the user running pppd is in group `groupname', s/he can use
- privileged options without restriction.
-
-* There is a new `receive-all' option, which causes pppd to accept all
- control characters, even the ones that the peer should be escaping
- (i.e. the receive asyncmap is 0). This is useful with some buggy
- peers.
-
-* The default asyncmap is now 0.
-
-* There is a new `sync' option, currently only implemented under
- Linux, which allows pppd to run on synchronous HDLC devices.
-
-* If a value for the device name or for the connect, disconnect,
- welcome or pty option is given in a privileged option file
- (i.e. /etc/ppp/options or a file loaded with the `call' option), it
- cannot be overridden by a non-privileged user.
-
-* Many bugs have been fixed, notably:
- - signals are not blocked unnecessarily, as they were in 2.3.6.
- - the usepeerdns option should work now.
- - the SPEED environment variable for scripts is set correctly.
- - the /etc/ppp/auth-down script is not run until auth-up completes.
- - the device is opened as root if it is the device on standard
- input.
- - pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux
- if a hangup occurs at the wrong time.
-
-* Some error messages have been changed to be clearer (I hope :-)