2 * ccp.c - PPP Compression Control Protocol.
4 * Copyright (c) 1994 The Australian National University.
7 * Permission to use, copy, modify, and distribute this software and its
8 * documentation is hereby granted, provided that the above copyright
9 * notice appears in all copies. This software is provided without any
10 * warranty, express or implied. The Australian National University
11 * makes no representations about the suitability of this software for
14 * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
15 * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
16 * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
17 * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
20 * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
21 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
22 * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
23 * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
24 * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
28 #define RCSID "$Id: ccp.c,v 1.35 2002/05/21 17:26:49 dfs Exp $"
36 #include <net/ppp-comp.h>
39 #include "chap_ms.h" /* mppe_xxxx_key */
40 #include "lcp.h" /* lcp_close() */
43 static const char rcsid[] = RCSID;
46 * Unfortunately there is a bug in zlib which means that using a
47 * size of 8 (window size = 256) for Deflate compression will cause
48 * buffer overruns and kernel crashes in the deflate module.
49 * Until this is fixed we only accept sizes in the range 9 .. 15.
50 * Thanks to James Carlson for pointing this out.
52 #define DEFLATE_MIN_WORKS 9
55 * Command-line options.
57 static int setbsdcomp __P((char **));
58 static int setdeflate __P((char **));
59 static char bsd_value[8];
60 static char deflate_value[8];
66 bool refuse_mppe_stateful = 1; /* Allow stateful mode? */
69 static option_t ccp_option_list[] = {
70 { "noccp", o_bool, &ccp_protent.enabled_flag,
71 "Disable CCP negotiation" },
72 { "-ccp", o_bool, &ccp_protent.enabled_flag,
73 "Disable CCP negotiation", OPT_ALIAS },
75 { "bsdcomp", o_special, (void *)setbsdcomp,
76 "Request BSD-Compress packet compression",
77 OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value },
78 { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
79 "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR,
80 &ccp_allowoptions[0].bsd_compress },
81 { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
82 "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
83 &ccp_allowoptions[0].bsd_compress },
85 { "deflate", o_special, (void *)setdeflate,
86 "request Deflate compression",
87 OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value },
88 { "nodeflate", o_bool, &ccp_wantoptions[0].deflate,
89 "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR,
90 &ccp_allowoptions[0].deflate },
91 { "-deflate", o_bool, &ccp_wantoptions[0].deflate,
92 "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
93 &ccp_allowoptions[0].deflate },
95 { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft,
96 "don't use draft deflate #", OPT_A2COPY,
97 &ccp_allowoptions[0].deflate_draft },
99 { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
100 "request Predictor-1", OPT_PRIO | 1 },
101 { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1,
102 "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR,
103 &ccp_allowoptions[0].predictor_1 },
104 { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
105 "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
106 &ccp_allowoptions[0].predictor_1 },
109 /* MPPE options are symmetrical ... we only set wantoptions here */
110 { "require-mppe", o_bool, &ccp_wantoptions[0].mppe,
111 "require MPPE encryption",
112 OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
113 { "+mppe", o_bool, &ccp_wantoptions[0].mppe,
114 "require MPPE encryption",
115 OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
116 { "nomppe", o_bool, &ccp_wantoptions[0].mppe,
117 "don't allow MPPE encryption", OPT_PRIO },
118 { "-mppe", o_bool, &ccp_wantoptions[0].mppe,
119 "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO },
121 /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */
122 { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
123 "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
124 &ccp_wantoptions[0].mppe },
125 { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe,
126 "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
127 &ccp_wantoptions[0].mppe },
128 { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe,
129 "don't allow MPPE 40-bit encryption",
130 OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe },
131 { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
132 "don't allow MPPE 40-bit encryption",
133 OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40,
134 &ccp_wantoptions[0].mppe },
136 { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
137 "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
138 &ccp_wantoptions[0].mppe },
139 { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe,
140 "require MPPE 128-bit encryption",
141 OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
142 &ccp_wantoptions[0].mppe },
143 { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe,
144 "don't allow MPPE 128-bit encryption",
145 OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe },
146 { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
147 "don't allow MPPE 128-bit encryption",
148 OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128,
149 &ccp_wantoptions[0].mppe },
151 /* strange one; we always request stateless, but will we allow stateful? */
152 { "mppe-stateful", o_bool, &refuse_mppe_stateful,
153 "allow MPPE stateful mode", OPT_PRIO },
154 { "nomppe-stateful", o_bool, &refuse_mppe_stateful,
155 "disallow MPPE stateful mode", OPT_PRIO | 1 },
162 * Protocol entry points from main code.
164 static void ccp_init __P((int unit));
165 static void ccp_open __P((int unit));
166 static void ccp_close __P((int unit, char *));
167 static void ccp_lowerup __P((int unit));
168 static void ccp_lowerdown __P((int));
169 static void ccp_input __P((int unit, u_char *pkt, int len));
170 static void ccp_protrej __P((int unit));
171 static int ccp_printpkt __P((u_char *pkt, int len,
172 void (*printer) __P((void *, char *, ...)),
174 static void ccp_datainput __P((int unit, u_char *pkt, int len));
176 struct protent ccp_protent = {
196 fsm ccp_fsm[NUM_PPP];
197 ccp_options ccp_wantoptions[NUM_PPP]; /* what to request the peer to use */
198 ccp_options ccp_gotoptions[NUM_PPP]; /* what the peer agreed to do */
199 ccp_options ccp_allowoptions[NUM_PPP]; /* what we'll agree to do */
200 ccp_options ccp_hisoptions[NUM_PPP]; /* what we agreed to do */
203 * Callbacks for fsm code.
205 static void ccp_resetci __P((fsm *));
206 static int ccp_cilen __P((fsm *));
207 static void ccp_addci __P((fsm *, u_char *, int *));
208 static int ccp_ackci __P((fsm *, u_char *, int));
209 static int ccp_nakci __P((fsm *, u_char *, int));
210 static int ccp_rejci __P((fsm *, u_char *, int));
211 static int ccp_reqci __P((fsm *, u_char *, int *, int));
212 static void ccp_up __P((fsm *));
213 static void ccp_down __P((fsm *));
214 static int ccp_extcode __P((fsm *, int, int, u_char *, int));
215 static void ccp_rack_timeout __P((void *));
216 static char *method_name __P((ccp_options *, ccp_options *));
218 static fsm_callbacks ccp_callbacks = {
237 * Do we want / did we get any compression?
239 #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \
240 || (opt).predictor_1 || (opt).predictor_2 \
244 * Local state (mainly for handling reset-reqs and reset-acks).
246 static int ccp_localstate[NUM_PPP];
247 #define RACK_PENDING 1 /* waiting for reset-ack */
248 #define RREQ_REPEAT 2 /* send another reset-req if no reset-ack */
250 #define RACKTIMEOUT 1 /* second */
252 static int all_rejected[NUM_PPP]; /* we rejected all peer's options */
265 abits = rbits = strtol(str, &endp, 0);
266 if (endp != str && *endp == ',') {
268 abits = strtol(str, &endp, 0);
270 if (*endp != 0 || endp == str) {
271 option_error("invalid parameter '%s' for bsdcomp option", *argv);
274 if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS))
275 || (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) {
276 option_error("bsdcomp option values must be 0 or %d .. %d",
277 BSD_MIN_BITS, BSD_MAX_BITS);
281 ccp_wantoptions[0].bsd_compress = 1;
282 ccp_wantoptions[0].bsd_bits = rbits;
284 ccp_wantoptions[0].bsd_compress = 0;
286 ccp_allowoptions[0].bsd_compress = 1;
287 ccp_allowoptions[0].bsd_bits = abits;
289 ccp_allowoptions[0].bsd_compress = 0;
290 slprintf(bsd_value, sizeof(bsd_value),
291 rbits == abits? "%d": "%d,%d", rbits, abits);
304 abits = rbits = strtol(str, &endp, 0);
305 if (endp != str && *endp == ',') {
307 abits = strtol(str, &endp, 0);
309 if (*endp != 0 || endp == str) {
310 option_error("invalid parameter '%s' for deflate option", *argv);
313 if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE))
314 || (abits != 0 && (abits < DEFLATE_MIN_SIZE
315 || abits > DEFLATE_MAX_SIZE))) {
316 option_error("deflate option values must be 0 or %d .. %d",
317 DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE);
320 if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) {
321 if (rbits == DEFLATE_MIN_SIZE)
322 rbits = DEFLATE_MIN_WORKS;
323 if (abits == DEFLATE_MIN_SIZE)
324 abits = DEFLATE_MIN_WORKS;
325 warn("deflate option value of %d changed to %d to avoid zlib bug",
326 DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS);
329 ccp_wantoptions[0].deflate = 1;
330 ccp_wantoptions[0].deflate_size = rbits;
332 ccp_wantoptions[0].deflate = 0;
334 ccp_allowoptions[0].deflate = 1;
335 ccp_allowoptions[0].deflate_size = abits;
337 ccp_allowoptions[0].deflate = 0;
338 slprintf(deflate_value, sizeof(deflate_value),
339 rbits == abits? "%d": "%d,%d", rbits, abits);
345 * ccp_init - initialize CCP.
351 fsm *f = &ccp_fsm[unit];
354 f->protocol = PPP_CCP;
355 f->callbacks = &ccp_callbacks;
358 memset(&ccp_wantoptions[unit], 0, sizeof(ccp_options));
359 memset(&ccp_gotoptions[unit], 0, sizeof(ccp_options));
360 memset(&ccp_allowoptions[unit], 0, sizeof(ccp_options));
361 memset(&ccp_hisoptions[unit], 0, sizeof(ccp_options));
363 ccp_wantoptions[0].deflate = 1;
364 ccp_wantoptions[0].deflate_size = DEFLATE_MAX_SIZE;
365 ccp_wantoptions[0].deflate_correct = 1;
366 ccp_wantoptions[0].deflate_draft = 1;
367 ccp_allowoptions[0].deflate = 1;
368 ccp_allowoptions[0].deflate_size = DEFLATE_MAX_SIZE;
369 ccp_allowoptions[0].deflate_correct = 1;
370 ccp_allowoptions[0].deflate_draft = 1;
372 ccp_wantoptions[0].bsd_compress = 1;
373 ccp_wantoptions[0].bsd_bits = BSD_MAX_BITS;
374 ccp_allowoptions[0].bsd_compress = 1;
375 ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
377 ccp_allowoptions[0].predictor_1 = 1;
381 * ccp_open - CCP is allowed to come up.
387 fsm *f = &ccp_fsm[unit];
389 if (f->state != OPENED)
390 ccp_flags_set(unit, 1, 0);
393 * Find out which compressors the kernel supports before
394 * deciding whether to open in silent mode.
397 if (!ANY_COMPRESS(ccp_gotoptions[unit]))
398 f->flags |= OPT_SILENT;
404 * ccp_close - Terminate CCP.
407 ccp_close(unit, reason)
411 ccp_flags_set(unit, 0, 0);
412 fsm_close(&ccp_fsm[unit], reason);
416 * ccp_lowerup - we may now transmit CCP packets.
422 fsm_lowerup(&ccp_fsm[unit]);
426 * ccp_lowerdown - we may not transmit CCP packets.
432 fsm_lowerdown(&ccp_fsm[unit]);
436 * ccp_input - process a received CCP packet.
439 ccp_input(unit, p, len)
444 fsm *f = &ccp_fsm[unit];
448 * Check for a terminate-request so we can print a message.
451 fsm_input(f, p, len);
452 if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) {
453 notice("Compression disabled by peer.");
455 if (ccp_gotoptions[unit].mppe) {
456 notice("MPPE disabled, closing LCP");
457 lcp_close(unit, "MPPE disabled by peer");
463 * If we get a terminate-ack and we're not asking for compression,
466 if (oldstate == REQSENT && p[0] == TERMACK
467 && !ANY_COMPRESS(ccp_gotoptions[unit]))
468 ccp_close(unit, "No compression negotiated");
472 * Handle a CCP-specific code.
475 ccp_extcode(f, code, id, p, len)
483 if (f->state != OPENED)
485 /* send a reset-ack, which the transmitter will see and
486 reset its compression state. */
487 fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
491 if (ccp_localstate[f->unit] & RACK_PENDING && id == f->reqid) {
492 ccp_localstate[f->unit] &= ~(RACK_PENDING | RREQ_REPEAT);
493 UNTIMEOUT(ccp_rack_timeout, f);
505 * ccp_protrej - peer doesn't talk CCP.
511 ccp_flags_set(unit, 0, 0);
512 fsm_lowerdown(&ccp_fsm[unit]);
515 if (ccp_gotoptions[unit].mppe)
516 lcp_close(unit, "MPPE required but peer negotiation failed");
522 * ccp_resetci - initialize at start of negotiation.
528 ccp_options *go = &ccp_gotoptions[f->unit];
529 u_char opt_buf[CCP_MAX_OPTION_LENGTH];
531 *go = ccp_wantoptions[f->unit];
532 all_rejected[f->unit] = 0;
536 ccp_options *ao = &ccp_allowoptions[f->unit];
537 int auth_mschap_bits = auth_done[f->unit];
541 * Start with a basic sanity check: mschap[v2] auth must be in
542 * exactly one direction. RFC 3079 says that the keys are
543 * 'derived from the credentials of the peer that initiated the call',
544 * however the PPP protocol doesn't have such a concept, and pppd
545 * cannot get this info externally. Instead we do the best we can.
546 * NB: If MPPE is required, all other compression opts are invalid.
547 * So, we return right away if we can't do it.
550 /* Leave only the mschap auth bits set */
551 auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER |
552 CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
553 /* Count the mschap auths */
554 auth_mschap_bits >>= CHAP_MS_SHIFT;
557 numbits += auth_mschap_bits & 1;
558 auth_mschap_bits >>= 1;
559 } while (auth_mschap_bits);
561 error("MPPE required, but auth done in both directions.");
562 lcp_close(f->unit, "MPPE required but not available");
566 error("MPPE required, but MS-CHAP[v2] auth not performed.");
567 lcp_close(f->unit, "MPPE required but not available");
571 /* LM auth not supported for MPPE */
572 if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) {
573 /* This might be noise */
574 if (go->mppe & MPPE_OPT_40) {
575 notice("Disabling 40-bit MPPE; MS-CHAP LM not supported");
576 go->mppe &= ~MPPE_OPT_40;
577 ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40;
581 /* Last check: can we actually negotiate something? */
582 if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) {
583 /* Could be misconfig, could be 40-bit disabled above. */
584 error("MPPE required, but both 40-bit and 128-bit disabled.");
585 lcp_close(f->unit, "MPPE required but not available");
591 /* MPPE is not compatible with other compression types */
592 ao->bsd_compress = go->bsd_compress = 0;
593 ao->predictor_1 = go->predictor_1 = 0;
594 ao->predictor_2 = go->predictor_2 = 0;
595 ao->deflate = go->deflate = 0;
600 * Check whether the kernel knows about the various
601 * compression methods we might request.
605 opt_buf[0] = CI_MPPE;
606 opt_buf[1] = CILEN_MPPE;
607 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
608 /* Key material unimportant here. */
609 if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) {
610 error("MPPE required, but kernel has no support.");
611 lcp_close(f->unit, "MPPE required but not available");
615 if (go->bsd_compress) {
616 opt_buf[0] = CI_BSD_COMPRESS;
617 opt_buf[1] = CILEN_BSD_COMPRESS;
618 opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, BSD_MIN_BITS);
619 if (ccp_test(f->unit, opt_buf, CILEN_BSD_COMPRESS, 0) <= 0)
620 go->bsd_compress = 0;
623 if (go->deflate_correct) {
624 opt_buf[0] = CI_DEFLATE;
625 opt_buf[1] = CILEN_DEFLATE;
626 opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
627 opt_buf[3] = DEFLATE_CHK_SEQUENCE;
628 if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
629 go->deflate_correct = 0;
631 if (go->deflate_draft) {
632 opt_buf[0] = CI_DEFLATE_DRAFT;
633 opt_buf[1] = CILEN_DEFLATE;
634 opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
635 opt_buf[3] = DEFLATE_CHK_SEQUENCE;
636 if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
637 go->deflate_draft = 0;
639 if (!go->deflate_correct && !go->deflate_draft)
642 if (go->predictor_1) {
643 opt_buf[0] = CI_PREDICTOR_1;
644 opt_buf[1] = CILEN_PREDICTOR_1;
645 if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_1, 0) <= 0)
648 if (go->predictor_2) {
649 opt_buf[0] = CI_PREDICTOR_2;
650 opt_buf[1] = CILEN_PREDICTOR_2;
651 if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_2, 0) <= 0)
657 * ccp_cilen - Return total length of our configuration info.
663 ccp_options *go = &ccp_gotoptions[f->unit];
665 return (go->bsd_compress? CILEN_BSD_COMPRESS: 0)
666 + (go->deflate? CILEN_DEFLATE: 0)
667 + (go->predictor_1? CILEN_PREDICTOR_1: 0)
668 + (go->predictor_2? CILEN_PREDICTOR_2: 0)
669 + (go->mppe? CILEN_MPPE: 0);
673 * ccp_addci - put our requests in a packet.
676 ccp_addci(f, p, lenp)
682 ccp_options *go = &ccp_gotoptions[f->unit];
686 * Add the compression types that we can receive, in decreasing
691 u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
693 p[0] = opt_buf[0] = CI_MPPE;
694 p[1] = opt_buf[1] = CILEN_MPPE;
695 MPPE_OPTS_TO_CI(go->mppe, &p[2]);
696 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
697 BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN);
698 res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0);
702 /* This shouldn't happen, we've already tested it! */
703 lcp_close(f->unit, "MPPE required but not available in kernel");
707 p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
708 p[1] = CILEN_DEFLATE;
709 p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
710 p[3] = DEFLATE_CHK_SEQUENCE;
712 if (go->deflate_size < DEFLATE_MIN_WORKS) {
716 res = ccp_test(f->unit, p, CILEN_DEFLATE, 0);
720 } else if (res < 0) {
725 p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
727 if (p != p0 && go->deflate_correct && go->deflate_draft) {
728 p[0] = CI_DEFLATE_DRAFT;
729 p[1] = CILEN_DEFLATE;
730 p[2] = p[2 - CILEN_DEFLATE];
731 p[3] = DEFLATE_CHK_SEQUENCE;
735 if (go->bsd_compress) {
736 p[0] = CI_BSD_COMPRESS;
737 p[1] = CILEN_BSD_COMPRESS;
738 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
740 if (go->bsd_bits < BSD_MIN_BITS) {
741 go->bsd_compress = 0;
744 res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 0);
746 p += CILEN_BSD_COMPRESS;
748 } else if (res < 0) {
749 go->bsd_compress = 0;
753 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
756 /* XXX Should Predictor 2 be preferable to Predictor 1? */
757 if (go->predictor_1) {
758 p[0] = CI_PREDICTOR_1;
759 p[1] = CILEN_PREDICTOR_1;
760 if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 0) <= 0) {
763 p += CILEN_PREDICTOR_1;
766 if (go->predictor_2) {
767 p[0] = CI_PREDICTOR_2;
768 p[1] = CILEN_PREDICTOR_2;
769 if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 0) <= 0) {
772 p += CILEN_PREDICTOR_2;
776 go->method = (p > p0)? p0[0]: -1;
782 * ccp_ackci - process a received configure-ack, and return
783 * 1 iff the packet was OK.
791 ccp_options *go = &ccp_gotoptions[f->unit];
796 u_char opt_buf[CILEN_MPPE];
798 opt_buf[0] = CI_MPPE;
799 opt_buf[1] = CILEN_MPPE;
800 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
801 if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE))
805 /* XXX Cope with first/fast ack */
811 if (len < CILEN_DEFLATE
812 || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
813 || p[1] != CILEN_DEFLATE
814 || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
815 || p[3] != DEFLATE_CHK_SEQUENCE)
818 len -= CILEN_DEFLATE;
819 /* XXX Cope with first/fast ack */
822 if (go->deflate_correct && go->deflate_draft) {
823 if (len < CILEN_DEFLATE
824 || p[0] != CI_DEFLATE_DRAFT
825 || p[1] != CILEN_DEFLATE
826 || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
827 || p[3] != DEFLATE_CHK_SEQUENCE)
830 len -= CILEN_DEFLATE;
833 if (go->bsd_compress) {
834 if (len < CILEN_BSD_COMPRESS
835 || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS
836 || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
838 p += CILEN_BSD_COMPRESS;
839 len -= CILEN_BSD_COMPRESS;
840 /* XXX Cope with first/fast ack */
841 if (p == p0 && len == 0)
844 if (go->predictor_1) {
845 if (len < CILEN_PREDICTOR_1
846 || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1)
848 p += CILEN_PREDICTOR_1;
849 len -= CILEN_PREDICTOR_1;
850 /* XXX Cope with first/fast ack */
851 if (p == p0 && len == 0)
854 if (go->predictor_2) {
855 if (len < CILEN_PREDICTOR_2
856 || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2)
858 p += CILEN_PREDICTOR_2;
859 len -= CILEN_PREDICTOR_2;
860 /* XXX Cope with first/fast ack */
861 if (p == p0 && len == 0)
871 * ccp_nakci - process received configure-nak.
872 * Returns 1 iff the nak was OK.
880 ccp_options *go = &ccp_gotoptions[f->unit];
881 ccp_options no; /* options we've seen already */
882 ccp_options try; /* options to ask for next time */
884 memset(&no, 0, sizeof(no));
888 if (go->mppe && len >= CILEN_MPPE
889 && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
892 * Peer wants us to use a different strength or other setting.
893 * Fail if we aren't willing to use his suggestion.
895 MPPE_CI_TO_OPTS(&p[2], try.mppe);
896 if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful)
898 else if ((go->mppe & try.mppe) != try.mppe)
899 /* Peer must have set options we didn't request (suggest) */
903 lcp_close(f->unit, "MPPE required but peer negotiation failed");
906 if (go->deflate && len >= CILEN_DEFLATE
907 && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
908 && p[1] == CILEN_DEFLATE) {
911 * Peer wants us to use a different code size or something.
912 * Stop asking for Deflate if we don't understand his suggestion.
914 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
915 || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS
916 || p[3] != DEFLATE_CHK_SEQUENCE)
918 else if (DEFLATE_SIZE(p[2]) < go->deflate_size)
919 try.deflate_size = DEFLATE_SIZE(p[2]);
921 len -= CILEN_DEFLATE;
922 if (go->deflate_correct && go->deflate_draft
923 && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
924 && p[1] == CILEN_DEFLATE) {
926 len -= CILEN_DEFLATE;
930 if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
931 && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
934 * Peer wants us to use a different number of bits
935 * or a different version.
937 if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION)
938 try.bsd_compress = 0;
939 else if (BSD_NBITS(p[2]) < go->bsd_bits)
940 try.bsd_bits = BSD_NBITS(p[2]);
941 p += CILEN_BSD_COMPRESS;
942 len -= CILEN_BSD_COMPRESS;
946 * Predictor-1 and 2 have no options, so they can't be Naked.
948 * There may be remaining options but we ignore them.
951 if (f->state != OPENED)
957 * ccp_rejci - reject some of our suggested compression methods.
965 ccp_options *go = &ccp_gotoptions[f->unit];
966 ccp_options try; /* options to request next time */
971 * Cope with empty configure-rejects by ceasing to send
972 * configure-requests.
974 if (len == 0 && all_rejected[f->unit])
978 if (go->mppe && len >= CILEN_MPPE
979 && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
980 lcp_close(f->unit, "MPPE required but peer refused");
985 if (go->deflate && len >= CILEN_DEFLATE
986 && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
987 && p[1] == CILEN_DEFLATE) {
988 if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
989 || p[3] != DEFLATE_CHK_SEQUENCE)
990 return 0; /* Rej is bad */
991 if (go->deflate_correct)
992 try.deflate_correct = 0;
994 try.deflate_draft = 0;
996 len -= CILEN_DEFLATE;
997 if (go->deflate_correct && go->deflate_draft
998 && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
999 && p[1] == CILEN_DEFLATE) {
1000 if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
1001 || p[3] != DEFLATE_CHK_SEQUENCE)
1002 return 0; /* Rej is bad */
1003 try.deflate_draft = 0;
1005 len -= CILEN_DEFLATE;
1007 if (!try.deflate_correct && !try.deflate_draft)
1010 if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
1011 && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
1012 if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
1014 try.bsd_compress = 0;
1015 p += CILEN_BSD_COMPRESS;
1016 len -= CILEN_BSD_COMPRESS;
1018 if (go->predictor_1 && len >= CILEN_PREDICTOR_1
1019 && p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) {
1020 try.predictor_1 = 0;
1021 p += CILEN_PREDICTOR_1;
1022 len -= CILEN_PREDICTOR_1;
1024 if (go->predictor_2 && len >= CILEN_PREDICTOR_2
1025 && p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) {
1026 try.predictor_2 = 0;
1027 p += CILEN_PREDICTOR_2;
1028 len -= CILEN_PREDICTOR_2;
1034 if (f->state != OPENED)
1041 * ccp_reqci - processed a received configure-request.
1042 * Returns CONFACK, CONFNAK or CONFREJ and the packet modified
1046 ccp_reqci(f, p, lenp, dont_nak)
1052 int ret, newret, res;
1054 int len, clen, type, nb;
1055 ccp_options *ho = &ccp_hisoptions[f->unit];
1056 ccp_options *ao = &ccp_allowoptions[f->unit];
1058 bool seen_ci_mppe = 0;
1065 memset(ho, 0, sizeof(ccp_options));
1066 ho->method = (len > 0)? p[0]: -1;
1070 if (len < 2 || p[1] < 2 || p[1] > len) {
1082 if (!ao->mppe || clen != CILEN_MPPE) {
1087 MPPE_CI_TO_OPTS(&p[2], ho->mppe);
1089 /* Nak if anything unsupported or unknown are set. */
1090 if (ho->mppe & MPPE_OPT_UNSUPPORTED) {
1092 ho->mppe &= ~MPPE_OPT_UNSUPPORTED;
1094 if (ho->mppe & MPPE_OPT_UNKNOWN) {
1096 ho->mppe &= ~MPPE_OPT_UNKNOWN;
1099 /* Check state opt */
1100 if (ho->mppe & MPPE_OPT_STATEFUL) {
1101 if (refuse_mppe_stateful) {
1103 * We can Nak and request stateless, but it's a
1104 * lot easier to just assume the peer will request
1105 * it if he can do it; stateful mode is bad over
1106 * the Internet -- which is where we expect MPPE.
1115 /* Find out which of {S,L} are set. */
1116 if ((ho->mppe & MPPE_OPT_128)
1117 && (ho->mppe & MPPE_OPT_40)) {
1118 /* Both are set, negotiate the strongest. */
1120 if (ao->mppe & MPPE_OPT_128)
1121 ho->mppe &= ~MPPE_OPT_40;
1122 else if (ao->mppe & MPPE_OPT_40)
1123 ho->mppe &= ~MPPE_OPT_128;
1128 } else if (ho->mppe & MPPE_OPT_128) {
1129 if (!(ao->mppe & MPPE_OPT_128)) {
1133 } else if (ho->mppe & MPPE_OPT_40) {
1134 if (!(ao->mppe & MPPE_OPT_40)) {
1139 /* Neither are set. */
1144 /* rebuild the opts */
1145 MPPE_OPTS_TO_CI(ho->mppe, &p[2]);
1146 if (newret == CONFACK) {
1147 u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
1150 BCOPY(p, opt_buf, CILEN_MPPE);
1151 BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
1153 if (ccp_test(f->unit, opt_buf,
1154 CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) {
1155 /* This shouldn't happen, we've already tested it! */
1156 error("MPPE required, but kernel has no support.");
1157 lcp_close(f->unit, "MPPE required but not available");
1162 * We need to decrease the interface MTU by MPPE_PAD
1163 * because MPPE frames **grow**. The kernel [must]
1164 * allocate MPPE_PAD extra bytes in xmit buffers.
1166 mtu = netif_get_mtu(f->unit);
1168 netif_set_mtu(f->unit, mtu - MPPE_PAD);
1176 case CI_DEFLATE_DRAFT:
1177 if (!ao->deflate || clen != CILEN_DEFLATE
1178 || (!ao->deflate_correct && type == CI_DEFLATE)
1179 || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) {
1185 ho->deflate_size = nb = DEFLATE_SIZE(p[2]);
1186 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
1187 || p[3] != DEFLATE_CHK_SEQUENCE
1188 || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) {
1191 p[2] = DEFLATE_MAKE_OPT(ao->deflate_size);
1192 p[3] = DEFLATE_CHK_SEQUENCE;
1193 /* fall through to test this #bits below */
1199 * Check whether we can do Deflate with the window
1200 * size they want. If the window is too big, reduce
1201 * it until the kernel can cope and nak with that.
1202 * We only check this for the first option.
1206 res = ccp_test(f->unit, p, CILEN_DEFLATE, 1);
1208 break; /* it's OK now */
1209 if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) {
1211 p[2] = DEFLATE_MAKE_OPT(ho->deflate_size);
1216 p[2] = DEFLATE_MAKE_OPT(nb);
1221 case CI_BSD_COMPRESS:
1222 if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) {
1227 ho->bsd_compress = 1;
1228 ho->bsd_bits = nb = BSD_NBITS(p[2]);
1229 if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION
1230 || nb > ao->bsd_bits || nb < BSD_MIN_BITS) {
1233 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits);
1234 /* fall through to test this #bits below */
1240 * Check whether we can do BSD-Compress with the code
1241 * size they want. If the code size is too big, reduce
1242 * it until the kernel can cope and nak with that.
1243 * We only check this for the first option.
1247 res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 1);
1250 if (res < 0 || nb == BSD_MIN_BITS || dont_nak) {
1252 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION,
1258 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb);
1263 case CI_PREDICTOR_1:
1264 if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) {
1269 ho->predictor_1 = 1;
1271 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 1) <= 0) {
1276 case CI_PREDICTOR_2:
1277 if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) {
1282 ho->predictor_2 = 1;
1284 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 1) <= 0) {
1294 if (newret == CONFNAK && dont_nak)
1296 if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) {
1297 /* we're returning this option */
1298 if (newret == CONFREJ && ret == CONFNAK)
1302 BCOPY(p, retp, clen);
1310 if (ret != CONFACK) {
1311 if (ret == CONFREJ && *lenp == retp - p0)
1312 all_rejected[f->unit] = 1;
1317 if (ret == CONFREJ && ao->mppe && !seen_ci_mppe)
1318 lcp_close(f->unit, "MPPE required but peer negotiation failed");
1324 * Make a string name for a compression method (or 2).
1327 method_name(opt, opt2)
1328 ccp_options *opt, *opt2;
1330 static char result[64];
1332 if (!ANY_COMPRESS(*opt))
1334 switch (opt->method) {
1339 char *q = result + sizeof(result); /* 1 past result */
1341 slprintf(p, q - p, "MPPE ");
1343 if (opt->mppe & MPPE_OPT_128) {
1344 slprintf(p, q - p, "128-bit ");
1347 if (opt->mppe & MPPE_OPT_40) {
1348 slprintf(p, q - p, "40-bit ");
1351 if (opt->mppe & MPPE_OPT_STATEFUL)
1352 slprintf(p, q - p, "stateful");
1354 slprintf(p, q - p, "stateless");
1360 case CI_DEFLATE_DRAFT:
1361 if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
1362 slprintf(result, sizeof(result), "Deflate%s (%d/%d)",
1363 (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
1364 opt->deflate_size, opt2->deflate_size);
1366 slprintf(result, sizeof(result), "Deflate%s (%d)",
1367 (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
1370 case CI_BSD_COMPRESS:
1371 if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits)
1372 slprintf(result, sizeof(result), "BSD-Compress (%d/%d)",
1373 opt->bsd_bits, opt2->bsd_bits);
1375 slprintf(result, sizeof(result), "BSD-Compress (%d)",
1378 case CI_PREDICTOR_1:
1379 return "Predictor 1";
1380 case CI_PREDICTOR_2:
1381 return "Predictor 2";
1383 slprintf(result, sizeof(result), "Method %d", opt->method);
1389 * CCP has come up - inform the kernel driver and log a message.
1395 ccp_options *go = &ccp_gotoptions[f->unit];
1396 ccp_options *ho = &ccp_hisoptions[f->unit];
1399 ccp_flags_set(f->unit, 1, 1);
1400 if (ANY_COMPRESS(*go)) {
1401 if (ANY_COMPRESS(*ho)) {
1402 if (go->method == ho->method) {
1403 notice("%s compression enabled", method_name(go, ho));
1405 strlcpy(method1, method_name(go, NULL), sizeof(method1));
1406 notice("%s / %s compression enabled",
1407 method1, method_name(ho, NULL));
1410 notice("%s receive compression enabled", method_name(go, NULL));
1411 } else if (ANY_COMPRESS(*ho))
1412 notice("%s transmit compression enabled", method_name(ho, NULL));
1415 BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN);
1416 BZERO(mppe_send_key, MPPE_MAX_KEY_LEN);
1417 start_networks(f->unit); /* Bring up IP et al */
1423 * CCP has gone down - inform the kernel driver.
1429 if (ccp_localstate[f->unit] & RACK_PENDING)
1430 UNTIMEOUT(ccp_rack_timeout, f);
1431 ccp_localstate[f->unit] = 0;
1432 ccp_flags_set(f->unit, 1, 0);
1434 if (ccp_gotoptions[f->unit].mppe)
1435 lcp_close(f->unit, "MPPE disabled");
1440 * Print the contents of a CCP packet.
1442 static char *ccp_codenames[] = {
1443 "ConfReq", "ConfAck", "ConfNak", "ConfRej",
1444 "TermReq", "TermAck", "CodeRej",
1445 NULL, NULL, NULL, NULL, NULL, NULL,
1446 "ResetReq", "ResetAck",
1450 ccp_printpkt(p, plen, printer, arg)
1453 void (*printer) __P((void *, char *, ...));
1456 u_char *p0, *optend;
1461 if (plen < HEADERLEN)
1465 len = (p[2] << 8) + p[3];
1466 if (len < HEADERLEN || len > plen)
1469 if (code >= 1 && code <= sizeof(ccp_codenames) / sizeof(char *)
1470 && ccp_codenames[code-1] != NULL)
1471 printer(arg, " %s", ccp_codenames[code-1]);
1473 printer(arg, " code=0x%x", code);
1474 printer(arg, " id=0x%x", id);
1483 /* print list of possible compression methods */
1487 if (optlen < 2 || optlen > len)
1491 optend = p + optlen;
1495 if (optlen >= CILEN_MPPE) {
1498 MPPE_CI_TO_OPTS(&p[2], mppe_opts);
1499 printer(arg, "mppe %s %s %s %s %s %s%s",
1500 (p[2] & MPPE_H_BIT)? "+H": "-H",
1501 (p[5] & MPPE_M_BIT)? "+M": "-M",
1502 (p[5] & MPPE_S_BIT)? "+S": "-S",
1503 (p[5] & MPPE_L_BIT)? "+L": "-L",
1504 (p[5] & MPPE_D_BIT)? "+D": "-D",
1505 (p[5] & MPPE_C_BIT)? "+C": "-C",
1506 (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": "");
1507 if (mppe_opts & MPPE_OPT_UNKNOWN)
1508 printer(arg, " (%.2x %.2x %.2x %.2x)",
1509 p[2], p[3], p[4], p[5]);
1515 case CI_DEFLATE_DRAFT:
1516 if (optlen >= CILEN_DEFLATE) {
1517 printer(arg, "deflate%s %d",
1518 (code == CI_DEFLATE_DRAFT? "(old#)": ""),
1519 DEFLATE_SIZE(p[2]));
1520 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL)
1521 printer(arg, " method %d", DEFLATE_METHOD(p[2]));
1522 if (p[3] != DEFLATE_CHK_SEQUENCE)
1523 printer(arg, " check %d", p[3]);
1527 case CI_BSD_COMPRESS:
1528 if (optlen >= CILEN_BSD_COMPRESS) {
1529 printer(arg, "bsd v%d %d", BSD_VERSION(p[2]),
1531 p += CILEN_BSD_COMPRESS;
1534 case CI_PREDICTOR_1:
1535 if (optlen >= CILEN_PREDICTOR_1) {
1536 printer(arg, "predictor 1");
1537 p += CILEN_PREDICTOR_1;
1540 case CI_PREDICTOR_2:
1541 if (optlen >= CILEN_PREDICTOR_2) {
1542 printer(arg, "predictor 2");
1543 p += CILEN_PREDICTOR_2;
1548 printer(arg, " %.2x", *p++);
1555 if (len > 0 && *p >= ' ' && *p < 0x7f) {
1556 print_string((char *)p, len, printer, arg);
1563 /* dump out the rest of the packet in hex */
1565 printer(arg, " %.2x", *p++);
1571 * We have received a packet that the decompressor failed to
1572 * decompress. Here we would expect to issue a reset-request, but
1573 * Motorola has a patent on resetting the compressor as a result of
1574 * detecting an error in the decompressed data after decompression.
1575 * (See US patent 5,130,993; international patent publication number
1576 * WO 91/10289; Australian patent 73296/91.)
1578 * So we ask the kernel whether the error was detected after
1579 * decompression; if it was, we take CCP down, thus disabling
1580 * compression :-(, otherwise we issue the reset-request.
1583 ccp_datainput(unit, pkt, len)
1591 if (f->state == OPENED) {
1592 if (ccp_fatal_error(unit)) {
1594 * Disable compression by taking CCP down.
1596 error("Lost compression sync: disabling compression");
1597 ccp_close(unit, "Lost compression sync");
1600 * If we were doing MPPE, we must also take the link down.
1602 if (ccp_gotoptions[unit].mppe) {
1603 error("Too many MPPE errors, closing LCP");
1604 lcp_close(unit, "Too many MPPE errors");
1609 * Send a reset-request to reset the peer's compressor.
1610 * We don't do that if we are still waiting for an
1611 * acknowledgement to a previous reset-request.
1613 if (!(ccp_localstate[f->unit] & RACK_PENDING)) {
1614 fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
1615 TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
1616 ccp_localstate[f->unit] |= RACK_PENDING;
1618 ccp_localstate[f->unit] |= RREQ_REPEAT;
1624 * Timeout waiting for reset-ack.
1627 ccp_rack_timeout(arg)
1632 if (f->state == OPENED && ccp_localstate[f->unit] & RREQ_REPEAT) {
1633 fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0);
1634 TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
1635 ccp_localstate[f->unit] &= ~RREQ_REPEAT;
1637 ccp_localstate[f->unit] &= ~RACK_PENDING;