Initial revision

diff --git a/osf1/ppp_init.c b/osf1/ppp_init.c
new file mode 100644 (file)
index 0000000..71d996e
--- /dev/null
+++ b/osf1/ppp_init.c
@@ -0,0 +1,140 @@
+/*
+ * *****************************************************************
+ * *                                                               *
+ * *    Copyright (c) Digital Equipment Corporation, 1991, 1994    *
+ * *                                                               *
+ * *   All Rights Reserved.  Unpublished rights  reserved  under   *
+ * *   the copyright laws of the United States.                    *
+ * *                                                               *
+ * *   The software contained on this media  is  proprietary  to   *
+ * *   and  embodies  the  confidential  technology  of  Digital   *
+ * *   Equipment Corporation.  Possession, use,  duplication  or   *
+ * *   dissemination of the software and media is authorized only  *
+ * *   pursuant to a valid written license from Digital Equipment  *
+ * *   Corporation.                                                *
+ * *                                                               *
+ * *   RESTRICTED RIGHTS LEGEND   Use, duplication, or disclosure  *
+ * *   by the U.S. Government is subject to restrictions  as  set  *
+ * *   forth in Subparagraph (c)(1)(ii)  of  DFARS  252.227-7013,  *
+ * *   or  in  FAR 52.227-19, as applicable.                       *
+ * *                                                               *
+ * *****************************************************************
+ */
+/*
+ * HISTORY
+ */
+/*
+ * static char *rcsid = "@(#)$RCSfile: ppp_init.c,v $ $Revision: 1.1 $ (DEC) $Date: 1995/05/22 02:30:55 $";
+ */
+/*
+ * (c) Copyright 1990, 1991, 1992 OPEN SOFTWARE FOUNDATION, INC.
+ * ALL RIGHTS RESERVED
+ */
+/*
+ * OSF/1 Release 1.2
+ */
+
+/*
+ *     template for the initialization routine for a module/driver
+ *
+ *     - #define STRNAME to driver/module name (with quotes)
+ *       (maximum length FMNAMESZ, which is fixed at 8 + trailing 0).
+ *
+ *     - #define STRCONFIG to the configure entry point's name
+ *
+ *     - #define STRINFO to the driver/module's info structure name.
+ *
+ *     - #define STRFLAGS to STR_IS_DEVICE or STR_IS_MODULE with others
+ *       as appropriate (e.g. STR_SYSV4_OPEN).
+ *
+ *     - #define STRSYNCL, STRSYNCI, STRTTYS to appropriate values if
+ *       not the defaults below. See the manual.
+ *
+ *     - Include this file into module's source file,
+ *       preferably after the streamtab definition
+ *
+ *     - The input buffer, indata, should be of the form "variable=value\n".
+ *       It should always begin with "subsys=subsystem-name\n" and it should
+ *       end with a '\0'. An example would be a subsystem, foo,
+ *       which wants to use a specific device number.  The input buffer,
+ *       indata, should be "subsys=foo\ndevno=123\n\0".
+ *             
+ *     - If your driver should take a specific character device number,
+ *       be sure to pass it within indata (e.g devno=123), else look at 
+ *       outdata for assigned value.
+ *
+ *     - Apart from this change, you'll have to update
+ *
+ *             - kernel/streams/str_config.c
+ *               (insert a call to this routine)
+ *             - kernel/conf/files
+ *               (insert module's source file)
+ */
+
+#include <sys/sysconfig.h>
+#include <sys/stream.h>
+
+#ifndef PPP_VD
+#include "ppp.h"
+#endif
+
+static struct streamadm        tmpl_sa;
+
+extern struct streamtab ppp_asyncinfo;
+extern struct streamtab ppp_ifinfo;
+extern struct streamtab ppp_compinfo;
+
+int
+ppp_configure(op, indata, indatalen, outdata, outdatalen)
+        sysconfig_op_t  op;
+        char        *  indata;
+        size_t          indatalen;
+        char        *  outdata;
+        size_t          outdatalen;
+{
+       static dev_t            devno;
+       int                     configured;
+       int                     size;
+       int                     ret = 0;
+       int                     x;
+
+       switch (op) {
+
+       case SYSCONFIG_CONFIGURE:
+
+            tmpl_sa.sa_version           = OSF_STREAMS_11;
+            tmpl_sa.sa_flags             = STR_IS_MODULE|STR_SYSV4_OPEN;
+            tmpl_sa.sa_ttys              = NULL;
+            tmpl_sa.sa_sync_level        = SQLVL_QUEUE;
+            tmpl_sa.sa_sync_info         = 0;
+
+            strcpy(tmpl_sa.sa_name, "pppif");
+
+           if ((devno=    strmod_add(NODEV, &ppp_ifinfo, &tmpl_sa)) == NODEV)
+                ret = ENODEV;
+           else {
+               strcpy(tmpl_sa.sa_name, "pppasync");
+               if ((devno = strmod_add(NODEV, &ppp_asyncinfo, &tmpl_sa)) == NODEV)
+                   ret = ENODEV;
+               else {
+                   strcpy(tmpl_sa.sa_name, "pppcomp");
+                   if ((devno = strmod_add(NODEV, &ppp_compinfo, &tmpl_sa)) == NODEV)
+                       ret = ENODEV;
+               }
+           }
+
+            for(x = 0; x < NPPP; x ++)
+                ppp_attach(x);
+
+            if (outdata && outdatalen>=0)
+                bcopy(indata,outdata,outdatalen);
+
+           break;
+
+       default:
+           ret = EINVAL;
+           break;
+       }
+
+       return(ret);
+}