* config file. Handle the "\\" (blessed system folder)
*/
static int
-load_config_file(char *device, char* path, int partition)
+load_config_file(struct boot_fspec_t *orig_fspec)
{
char *conf_file = NULL, *p;
struct boot_file_t file;
int sz, opened = 0, result = 0;
char conf_path[512];
- struct boot_fspec_t fspec;
+ struct boot_fspec_t fspec = *orig_fspec;
/* Allocate a buffer for the config file */
conf_file = malloc(CONFIG_FILE_MAX);
/* Build the path to the file */
if (_machine == _MACH_chrp)
strcpy(conf_path, "/etc/");
- else if (path && *path)
- strcpy(conf_path, path);
else
conf_path[0] = 0;
+ if (fspec.file && *fspec.file)
+ strcat(conf_path, fspec.file);
+ else
strcat(conf_path, CONFIG_FILE_NAME);
/* Open it */
- fspec.dev = device;
fspec.file = conf_path;
- fspec.part = partition;
result = open_file(&fspec, &file);
if (result != FILE_ERR_OK) {
prom_printf("%s:%d,", fspec.dev, fspec.part);
return result;
}
+/*
+ * "bootp-response" is the property name which is specified in
+ * the recommended practice doc for obp-tftp. However, pmac
+ * provides a "dhcp-response" property and chrp provides a
+ * "bootpreply-packet" property. The latter appears to begin the
+ * bootp packet at offset 0x2a in the property for some reason.
+ */
+
+struct bootp_property_offset {
+ char *name; /* property name */
+ int offset; /* offset into property where bootp packet occurs */
+};
+static const struct bootp_property_offset bootp_response_properties[] = {
+ { .name = "bootp-response", .offset = 0 },
+ { .name = "dhcp-response", .offset = 0 },
+ { .name = "bootpreply-packet", .offset = 0x2a },
+};
+
+struct bootp_packet {
+ u8 op, htype, hlen, hops;
+ u32 xid;
+ u16 secs, flags;
+ u32 ciaddr, yiaddr, siaddr, giaddr;
+ unsigned char chaddr[16];
+ unsigned char sname[64];
+ unsigned char file[128];
+ /* vendor options go here if we need them */
+};
+
+/*
+ * Search for config file by MAC address, then by IP address.
+ * Basically copying pxelinux's algorithm.
+ * http://syslinux.zytor.com/pxe.php#config
+ */
+static int load_my_config_file(struct boot_fspec_t *orig_fspec)
+{
+ void *bootp_response = NULL;
+ char *propname;
+ struct bootp_packet *packet;
+ int i = 0, size, offset = 0, rc = 0;
+ prom_handle chosen;
+ struct boot_fspec_t fspec = *orig_fspec;
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(x[0]))
+
+ chosen = prom_finddevice("/chosen");
+ if (chosen < 0) {
+ prom_printf("chosen=%d\n", chosen);
+ return 0;
+ }
+ prom_printf("ici\n");
+
+ for (i = 0; i < ARRAY_SIZE(bootp_response_properties); i++) {
+ propname = bootp_response_properties[i].name;
+ size = prom_getproplen(chosen, propname);
+ if (size <= 0)
+ continue;
+
+ DEBUG_F("using /chosen/%s\n", propname);
+ offset = bootp_response_properties[i].offset;
+ break;
+ }
+ prom_printf("ici 2\n");
+
+ if (size <= 0)
+ goto out;
+ prom_printf("ici 3\n");
+
+ if (sizeof(*packet) > size - offset) {
+ prom_printf("Malformed %s property?\n", propname);
+ goto out;
+ }
+ prom_printf("ici 4\n");
+
+ bootp_response = malloc(size);
+ if (!bootp_response)
+ goto out;
+ prom_printf("ici 5\n");
+
+ if (prom_getprop(chosen, propname, bootp_response, size) < 0)
+ goto out;
+ prom_printf("ici 6\n");
+
+ packet = bootp_response + offset;
+
+ /*
+ * First, try to match on mac address with the hardware type
+ * prepended.
+ */
+
+ /* 3 chars per byte in chaddr + 2 chars for htype + \0 */
+ fspec.file = malloc(packet->hlen * 3 + 2 + 1);
+ if (!fspec.file)
+ goto out;
+
+ sprintf(fspec.file, "%02x", packet->htype);
+
+ for (i = 0; i < packet->hlen; i++) {
+ char tmp[4];
+ sprintf(tmp, "-%02x", packet->chaddr[i]);
+ strcat(fspec.file, tmp);
+ }
+ prom_printf("ici 7\n");
+
+ rc = load_config_file(&fspec);
+ if (rc)
+ goto out;
+
+
+ /*
+ * Now try to match on IP.
+ */
+ free(fspec.file);
+ fspec.file = malloc(9);
+ sprintf(fspec.file, "%08X", packet->yiaddr);
+
+ while (strlen(fspec.file)) {
+ rc = load_config_file(&fspec);
+ if (rc)
+ goto out;
+ /* Chop one digit off the end, try again */
+ fspec.file[strlen(fspec.file) - 1] = '\0';
+ }
+
+ out:
+ if (rc) /* modify original only on success */
+ orig_fspec->file = fspec.file;
+ else
+ free(fspec.file);
+ free(bootp_response);
+ return rc;
+}
+
void maintabfunc (void)
{
if (useconf) {
DEBUG_F("After pmac path kludgeup: dev=%s, part=%d, file=%s\n",
boot.dev, boot.part, boot.file);
- useconf = load_config_file(boot.dev, boot.file, boot.part);
+ /*
+ * If we're doing a netboot, first look for one which matches our
+ * MAC address.
+ */
+ if (prom_get_devtype(boot.dev) == FILE_DEVICE_NET) {
+ prom_printf("Try to netboot\n");
+ useconf = load_my_config_file(&boot);
+ }
+
+ if (!useconf)
+ useconf = load_config_file(&boot);
prom_printf("Welcome to yaboot version " VERSION "\n");
prom_printf("Enter \"help\" to get some basic usage information\n");