1 /* Licensed under LGPLv2.1+ - see LICENSE file for details */
4 #include <ccan/tal/tal.h>
5 #include <ccan/typesafe_cb/typesafe_cb.h>
15 * struct io_plan - a plan for input or output.
17 * Each io_conn has zero to two of these active at any time.
22 * struct io_conn - a connection associated with an fd.
27 * io_new_conn - create a new connection.
28 * @ctx: the context to tal from (or NULL)
29 * @fd: the file descriptor.
30 * @init: the function to call for a new connection
31 * @arg: the argument to @init.
33 * This creates a connection which owns @fd, it then calls
34 * @init to initialize the connection, which sets up an io_plan.
36 * Returns NULL on error (and sets errno).
39 * // Dumb init function to print string and tell conn to close.
40 * static struct io_plan *conn_init(struct io_conn *conn, const char *msg)
42 * printf("Created conn %p: %s", conn, msg);
43 * return io_close(conn);
46 * static void create_self_closing_pipe(void)
49 * struct io_conn *conn;
53 * conn = io_new_conn(NULL, fd[0], conn_init, (const char *)"hi!");
58 #define io_new_conn(ctx, fd, init, arg) \
59 io_new_conn_((ctx), (fd), \
60 typesafe_cb_preargs(struct io_plan *, void *, \
62 struct io_conn *conn), \
65 struct io_conn *io_new_conn_(const tal_t *ctx, int fd,
66 struct io_plan *(*init)(struct io_conn *, void *),
70 * io_set_finish - set finish function on a connection.
71 * @conn: the connection.
72 * @finish: the function to call when it's closed or fails.
73 * @arg: the argument to @finish.
75 * @finish will be called when an I/O operation fails, or you call
76 * io_close() on the connection. errno will be set to the value
77 * after the failed I/O, or at the call to io_close(). The fd
78 * will be closed before @finish is called.
81 * static void finish(struct io_conn *conn, const char *msg)
83 * // errno is not 0 after success, so this is a bit useless.
84 * printf("Conn %p closed with errno %i (%s)\n", conn, errno, msg);
87 * // Dumb init function to print string and tell conn to close.
88 * static struct io_plan *conn_init(struct io_conn *conn, const char *msg)
90 * io_set_finish(conn, finish, msg);
91 * return io_close(conn);
94 #define io_set_finish(conn, finish, arg) \
95 io_set_finish_((conn), \
96 typesafe_cb_preargs(void, void *, \
100 void io_set_finish_(struct io_conn *conn,
101 void (*finish)(struct io_conn *, void *),
106 * io_new_listener - create a new accepting listener.
107 * @ctx: the context to tal from (or NULL)
108 * @fd: the file descriptor.
109 * @init: the function to call for a new connection
110 * @arg: the argument to @init.
112 * When @fd becomes readable, we accept(), create a new connection,
113 * (tal'ocated off @ctx) and pass that to init(). Note that if there is
114 * an error on this file descriptor, it will be freed.
116 * Returns NULL on error (and sets errno).
119 * #include <sys/types.h>
120 * #include <sys/socket.h>
125 * // Set up a listening socket, return it.
126 * static struct io_listener *do_listen(const char *port)
128 * struct addrinfo *addrinfo, hints;
131 * memset(&hints, 0, sizeof(hints));
132 * hints.ai_family = AF_UNSPEC;
133 * hints.ai_socktype = SOCK_STREAM;
134 * hints.ai_flags = AI_PASSIVE;
135 * hints.ai_protocol = 0;
137 * if (getaddrinfo(NULL, port, &hints, &addrinfo) != 0)
140 * fd = socket(addrinfo->ai_family, addrinfo->ai_socktype,
141 * addrinfo->ai_protocol);
145 * freeaddrinfo(addrinfo);
146 * setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
147 * if (bind(fd, addrinfo->ai_addr, addrinfo->ai_addrlen) != 0) {
151 * if (listen(fd, 1) != 0) {
155 * return io_new_listener(NULL, fd, conn_init, (const char *)"listened!");
158 #define io_new_listener(ctx, fd, init, arg) \
159 io_new_listener_((ctx), (fd), \
160 typesafe_cb_preargs(struct io_plan *, void *, \
162 struct io_conn *conn), \
164 struct io_listener *io_new_listener_(const tal_t *ctx, int fd,
165 struct io_plan *(*init)(struct io_conn *,
170 * io_close_listener - delete a listener.
171 * @listener: the listener returned from io_new_listener.
173 * This closes the fd and frees @listener.
177 * struct io_listener *l = do_listen("8111");
179 * io_loop(NULL, NULL);
180 * io_close_listener(l);
183 void io_close_listener(struct io_listener *listener);
186 * io_write - output plan to write data.
187 * @conn: the connection that plan is for.
188 * @data: the data buffer.
189 * @len: the length to write.
190 * @next: function to call output is done.
191 * @arg: @next argument
193 * This updates the output plan, to write out a data buffer. Once it's all
194 * written, the @next function will be called: on an error, the finish
195 * function is called instead.
197 * Note that the I/O may actually be done immediately.
200 * static struct io_plan *write_to_conn(struct io_conn *conn, const char *msg)
202 * // Write message, then close.
203 * return io_write(conn, msg, strlen(msg), io_close_cb, NULL);
206 #define io_write(conn, data, len, next, arg) \
207 io_write_((conn), (data), (len), \
208 typesafe_cb_preargs(struct io_plan *, void *, \
209 (next), (arg), struct io_conn *), \
211 struct io_plan *io_write_(struct io_conn *conn,
212 const void *data, size_t len,
213 struct io_plan *(*next)(struct io_conn *, void *),
217 * io_read - input plan to read data.
218 * @conn: the connection that plan is for.
219 * @data: the data buffer.
220 * @len: the length to read.
221 * @next: function to call once input is done.
222 * @arg: @next argument
224 * This creates a plan to read data into a buffer. Once it's all
225 * read, the @next function will be called: on an error, the finish
226 * function is called instead. If read() returns 0 (EOF) errno is set
229 * Note that the I/O may actually be done immediately.
232 * static struct io_plan *read_from_conn(struct io_conn *conn, char *buf)
234 * // Read message, then close.
235 * return io_read(conn, buf, 12, io_close_cb, NULL);
238 #define io_read(conn, data, len, next, arg) \
239 io_read_((conn), (data), (len), \
240 typesafe_cb_preargs(struct io_plan *, void *, \
241 (next), (arg), struct io_conn *), \
243 struct io_plan *io_read_(struct io_conn *conn,
244 void *data, size_t len,
245 struct io_plan *(*next)(struct io_conn *, void *),
250 * io_read_partial - input plan to read some data.
251 * @conn: the connection that plan is for.
252 * @data: the data buffer.
253 * @maxlen: the maximum length to read
254 * @lenp: set to the length actually read.
255 * @next: function to call once input is done.
256 * @arg: @next argument
258 * This creates a plan to read data into a buffer. Once any data is
259 * read, @len is updated and the @next function will be called: on an
260 * error, the finish function is called instead. If read() returns 0 (EOF)
263 * Note that the I/O may actually be done immediately.
271 * static struct io_plan *dump(struct io_conn *conn, struct buf *b)
273 * printf("Partial read: '%*s'\n", (int)b->len, b->buf);
275 * return io_close(conn);
278 * static struct io_plan *read_part(struct io_conn *conn, struct buf *b)
280 * // Read message, then dump and close.
281 * return io_read_partial(conn, b->buf, sizeof(b->buf), &b->len, dump, b);
284 #define io_read_partial(conn, data, maxlen, lenp, next, arg) \
285 io_read_partial_((conn), (data), (maxlen), (lenp), \
286 typesafe_cb_preargs(struct io_plan *, void *, \
290 struct io_plan *io_read_partial_(struct io_conn *conn,
291 void *data, size_t maxlen, size_t *lenp,
292 struct io_plan *(*next)(struct io_conn *,
297 * io_write_partial - output plan to write some data.
298 * @conn: the connection that plan is for.
299 * @data: the data buffer.
300 * @maxlen: the maximum length to write
301 * @lenp: set to the length actually written.
302 * @next: function to call once output is done.
303 * @arg: @next argument
305 * This creates a plan to write data from a buffer. Once any data is
306 * written, @len is updated and the @next function will be called: on an
307 * error, the finish function is called instead.
309 * Note that the I/O may actually be done immediately.
317 * static struct io_plan *show_partial(struct io_conn *conn, struct buf *b)
319 * printf("Only wrote: '%*s'\n", (int)b->len, b->buf);
321 * return io_close(conn);
324 * static struct io_plan *write_part(struct io_conn *conn, struct buf *b)
326 * // Write message, then dump and close.
327 * strcpy(b->buf, "Hello world");
328 * return io_write_partial(conn, b->buf, strlen(b->buf),
329 * &b->len, show_partial, b);
332 #define io_write_partial(conn, data, maxlen, lenp, next, arg) \
333 io_write_partial_((conn), (data), (maxlen), (lenp), \
334 typesafe_cb_preargs(struct io_plan *, void *, \
338 struct io_plan *io_write_partial_(struct io_conn *conn,
339 const void *data, size_t maxlen, size_t *lenp,
340 struct io_plan *(*next)(struct io_conn *,
345 * io_always - plan to immediately call next callback
346 * @conn: the connection that plan is for.
347 * @next: function to call.
348 * @arg: @next argument
350 * Sometimes it's neater to plan a callback rather than call it directly;
351 * for example, if you only need to read data for one path and not another.
354 * static struct io_plan *init_conn_with_nothing(struct io_conn *conn,
357 * // Silly example: close on next time around loop.
358 * return io_always(conn, io_close_cb, NULL);
361 #define io_always(conn, next, arg) \
362 io_always_((conn), typesafe_cb_preargs(struct io_plan *, void *, \
367 struct io_plan *io_always_(struct io_conn *conn,
368 struct io_plan *(*next)(struct io_conn *, void *),
372 * io_out_always - output plan to immediately call next callback
373 * @conn: the connection that plan is for.
374 * @next: function to call.
375 * @arg: @next argument
377 * This is a variant of io_always() which uses the output plan; it only
378 * matters if you are using io_duplex, and thus have two plans running at
381 #define io_out_always(conn, next, arg) \
382 io_out_always_((conn), typesafe_cb_preargs(struct io_plan *, void *, \
387 struct io_plan *io_out_always_(struct io_conn *conn,
388 struct io_plan *(*next)(struct io_conn *,
393 * io_connect - create an asynchronous connection to a listening socket.
394 * @conn: the connection that plan is for.
395 * @addr: where to connect.
396 * @init: function to call once it's connected
397 * @arg: @init argument
399 * This initiates a connection, and creates a plan for
400 * (asynchronously) completing it. Once complete, the @init function
404 * #include <sys/types.h>
405 * #include <sys/socket.h>
408 * // Write, then close socket.
409 * static struct io_plan *init_connect(struct io_conn *conn,
410 * struct addrinfo *addrinfo)
412 * return io_connect(conn, addrinfo, io_close_cb, NULL);
418 * struct addrinfo *addrinfo;
420 * fd = socket(AF_INET, SOCK_STREAM, 0);
421 * getaddrinfo("localhost", "8111", NULL, &addrinfo);
422 * io_new_conn(NULL, fd, init_connect, addrinfo);
425 #define io_connect(conn, addr, next, arg) \
426 io_connect_((conn), (addr), \
427 typesafe_cb_preargs(struct io_plan *, void *, \
432 struct io_plan *io_connect_(struct io_conn *conn, const struct addrinfo *addr,
433 struct io_plan *(*next)(struct io_conn *, void *),
437 * io_duplex - set plans for both input and output.
438 * @conn: the connection that plan is for.
439 * @in: the input plan
440 * @out: the output plan
442 * Most plans are either for input or output; io_duplex creates a plan
443 * which does both. This is often used in the init function to create
444 * two independent streams, though it can be used once on any connection.
446 * Note that if either plan closes the connection, it will be closed.
454 * static struct io_plan *read_and_write(struct io_conn *conn, struct buf *b)
456 * return io_duplex(conn,
457 * io_read(conn, b->in, sizeof(b->in), io_close_cb, b),
458 * io_write(conn, b->out, sizeof(b->out), io_close_cb,b));
461 struct io_plan *io_duplex(struct io_conn *conn,
462 struct io_plan *in_plan, struct io_plan *out_plan);
465 * io_halfclose - close half of an io_duplex connection.
466 * @conn: the connection that plan is for.
468 * It's common to want to close a duplex connection after both input and
469 * output plans have completed. If either calls io_close() the connection
470 * closes immediately. Instead, io_halfclose() needs to be called twice.
478 * static struct io_plan *finish(struct io_conn *conn, struct buf *b)
480 * return io_halfclose(conn);
483 * static struct io_plan *read_and_write(struct io_conn *conn, struct buf *b)
485 * return io_duplex(conn,
486 * io_read(conn, b->in, sizeof(b->in), finish, b),
487 * io_write(conn, b->out, sizeof(b->out), finish, b));
490 struct io_plan *io_halfclose(struct io_conn *conn);
493 * io_wait - leave a plan idle until something wakes us.
494 * @conn: the connection that plan is for.
495 * @waitaddr: the address to wait on.
496 * @next: function to call after waiting.
497 * @arg: @next argument
499 * This leaves the input or output idle: io_wake(@waitaddr) will be
500 * called later to restart the connection.
503 * // Silly example to wait then close.
504 * static struct io_plan *wait(struct io_conn *conn, void *b)
506 * return io_wait(conn, b, io_close_cb, NULL);
509 #define io_wait(conn, waitaddr, next, arg) \
510 io_wait_((conn), (waitaddr), \
511 typesafe_cb_preargs(struct io_plan *, void *, \
516 struct io_plan *io_wait_(struct io_conn *conn,
518 struct io_plan *(*next)(struct io_conn *, void *),
523 * io_out_wait - leave the output plan idle until something wakes us.
524 * @conn: the connection that plan is for.
525 * @waitaddr: the address to wait on.
526 * @next: function to call after waiting.
527 * @arg: @next argument
529 * io_wait() makes the input plan idle: if you're not using io_duplex it
530 * doesn't matter which plan is waiting. Otherwise, you may need to use
531 * io_out_wait() instead, to specify explicitly that the output plan is
534 #define io_out_wait(conn, waitaddr, next, arg) \
535 io_out_wait_((conn), (waitaddr), \
536 typesafe_cb_preargs(struct io_plan *, void *, \
541 struct io_plan *io_out_wait_(struct io_conn *conn,
543 struct io_plan *(*next)(struct io_conn *, void *),
547 * io_wake - wake up any connections waiting on @wait
548 * @waitaddr: the address to trigger.
550 * All io_conns who have returned io_wait() on @waitaddr will move on
551 * to their next callback.
554 * static struct io_plan *wake_it(struct io_conn *conn, void *b)
557 * return io_close(conn);
560 void io_wake(const void *wait);
563 * io_break - return from io_loop()
564 * @ret: non-NULL value to return from io_loop().
566 * This breaks out of the io_loop. As soon as the current function
567 * returns, any io_close()'d connections will have their finish
568 * callbacks called, then io_loop() with return with @ret.
570 * If io_loop() is called again, then @plan will be carried out.
573 * static struct io_plan *fail_on_timeout(struct io_conn *conn, char *msg)
576 * return io_close(conn);
579 void io_break(const void *ret);
582 * io_never - assert if callback is called.
583 * @conn: the connection that plan is for.
584 * @unused: an unused parameter to make this suitable for use as a callback.
586 * Sometimes you want to make it clear that a callback should never happen
587 * (eg. for io_break). This will assert() if called.
590 * static struct io_plan *break_out(struct io_conn *conn, void *unused)
593 * // We won't ever return from io_break
594 * return io_never(conn, NULL);
597 struct io_plan *io_never(struct io_conn *conn, void *unused);
599 /* FIXME: io_recvfrom/io_sendto */
602 * io_close - close a connection.
603 * @conn: the connection to close.
605 * The connection is immediately freed: it doesn't have to be the
606 * current connection and it doesn't need to be idle. No more IO or
607 * callbacks will occur, but if a function was added by io_set_finish()
608 * it will be called with the current errno preserved.
610 * This is equivalent to tal_free(io_conn), except it returns an io_plan
611 * for use in an io callback.
614 * static struct io_plan *close_on_timeout(struct io_conn *conn, const char *msg)
616 * printf("closing: %s\n", msg);
617 * return io_close(conn);
620 struct io_plan *io_close(struct io_conn *conn);
623 * io_close_cb - helper callback to close a connection.
624 * @conn: the connection.
626 * This is closes a connection; designed to be used as a callback
630 * #define close_on_timeout io_close_cb
632 struct io_plan *io_close_cb(struct io_conn *, void *unused);
635 * io_close_taken_fd - close a connection, but remove the filedescriptor first.
636 * @conn: the connection to take the file descriptor from and close.
638 * io_close closes the file descriptor underlying the io_conn; this version does
639 * not. Presumably you have used io_conn_fd() on it beforehand and will take
640 * care of the fd yourself.
642 * Note that this also turns off O_NONBLOCK on the fd.
645 * static struct io_plan *steal_fd(struct io_conn *conn, int *fd)
647 * *fd = io_conn_fd(conn);
648 * printf("stealing fd %i and closing\n", *fd);
649 * return io_close_taken_fd(conn);
652 struct io_plan *io_close_taken_fd(struct io_conn *conn);
655 * io_loop - process fds until all closed on io_break.
656 * @timers - timers which are waiting to go off (or NULL for none)
657 * @expired - an expired timer (can be NULL if @timers is)
659 * This is the core loop; it exits with the io_break() arg, or NULL if
660 * all connections and listeners are closed, or with @expired set to an
661 * expired timer (if @timers isn't NULL).
664 * io_loop(NULL, NULL);
666 void *io_loop(struct timers *timers, struct timer **expired);
669 * io_conn_fd - get the fd from a connection.
670 * @conn: the connection.
672 * Sometimes useful, eg for getsockname(). Note that the fd is O_NONBLOCK.
677 int io_conn_fd(const struct io_conn *conn);
680 * io_plan_in_started - is this conn doing input I/O now?
683 * This returns true if input I/O has been performed on the conn but
684 * @next hasn't been called yet. For example, io_read() may have done
687 * This can be useful if we want to terminate a connection only after
688 * reading a whole packet: if this returns true, we would wait until
691 bool io_plan_in_started(const struct io_conn *conn);
694 * io_plan_out_started - is this conn doing output I/O now?
697 * This returns true if output I/O has been performed on the conn but
698 * @next hasn't been called yet. For example, io_write() may have done
701 * This can be useful if we want to terminate a connection only after
702 * writing a whole packet: if this returns true, we would wait until
705 bool io_plan_out_started(const struct io_conn *conn);
708 * io_flush_sync - (synchronously) complete any outstanding output.
709 * @conn: the connection.
711 * This is generally used as an emergency escape, for example when we
712 * want to write an error message on a socket before terminating, but it may
713 * be in the middle of existing I/O. We don't want to service any other
716 * This returns true if all pending output is complete, false on error.
717 * The next callback is not called on the conn, but will be as soon as
718 * io_loop() is called.
723 bool io_flush_sync(struct io_conn *conn);
726 * io_conn_exclusive - set/unset an io_conn to exclusively serviced
727 * @conn: the connection
728 * @exclusive: whether to be exclusive or not
730 * If any io_conn is set exclusive, then no non-exclusive io_conn (or
731 * io_listener) will be serviced by io_loop(). If it's a io_duplex io_conn(),
732 * then io_conn_exclusive() makes the read-side exclusive; io_conn_out_exclusive()
733 * makes the write-side exclusive.
735 * This allows you to temporarily service only one (or several) fds.
736 * For example, you might want to flush out one io_conn and not
737 * receive any new connections or read any other input.
739 * Returns true if any exclusive io_conn remain, otherwise false.
740 * (This is useful for checking your own logic: dangling exclusive io_conn
743 bool io_conn_exclusive(struct io_conn *conn, bool exclusive);
746 * io_conn_out_exclusive - set/unset exclusive on the write-side of a duplex
747 * @conn: the connection, post io_duplex
748 * @exclusive: whether to be exclusive or not
750 * See io_conn_exclusive() above.
752 bool io_conn_out_exclusive(struct io_conn *conn, bool exclusive);
755 * io_fd_block - helper to set an fd blocking/nonblocking.
756 * @fd: the file descriptor
757 * @block: true to set blocking, false to set non-blocking.
759 * Generally only fails is @fd isn't a valid file descriptor, otherwise
762 bool io_fd_block(int fd, bool block);
765 * io_time_override - override the normal call for time.
766 * @nowfn: the function to call.
768 * io usually uses time_mono() internally, but this forces it
769 * to use your function (eg. for debugging). Returns the old
772 struct timemono (*io_time_override(struct timemono (*now)(void)))(void);
775 * io_poll_override - override the normal call for poll.
776 * @pollfn: the function to call.
778 * io usually uses poll() internally, but this forces it to use your
779 * function (eg. for debugging, suppressing fds, or polling on others unknown
780 * to ccan/io). Returns the old one.
782 int (*io_poll_override(int (*poll)(struct pollfd *fds, nfds_t nfds, int timeout)))(struct pollfd *, nfds_t, int);
784 #endif /* CCAN_IO_H */