]> git.ozlabs.org Git - ppp.git/commitdiff
Additions to support NeXTStep systems.
authorPaul Mackerras <paulus@samba.org>
Thu, 10 Aug 1995 06:48:39 +0000 (06:48 +0000)
committerPaul Mackerras <paulus@samba.org>
Thu, 10 Aug 1995 06:48:39 +0000 (06:48 +0000)
README.NeXT [new file with mode: 0644]
chat/Makefile.NeXT [new file with mode: 0644]
pppd/Makefile.NeXT [new file with mode: 0644]
pppd/sys-NeXT.c [new file with mode: 0644]
pppstats/Makefile.NeXT [new file with mode: 0644]

diff --git a/README.NeXT b/README.NeXT
new file mode 100644 (file)
index 0000000..fe1ec2b
--- /dev/null
@@ -0,0 +1,381 @@
+#
+#  $Id: README.NeXT,v 1.1 1995/08/10 06:48:23 paulus Exp $
+#
+
+This distribution contains a port of PPP-2.2 for NeXT.  The full
+source code is available as well as an MAB installer package.  Since
+this project is a continuing effort, you are encouraged to check out
+the WWW page to see if you have the latest software.  This is
+especially true if you find you have problems with the version you
+presently use. For more information on the NeXT PPP port see:
+  http://www.thoughtport.com:8080/PPP/
+     -or-
+  ftp://ftp.thoughtport.com/pub/next/ppp/
+
+For more information on PPP in general, you might want to check out:
+   http://cs.uni-bonn.de/ppp/faq.html
+     -and-
+   ftp://morningstar.com/pub/papers/ppp-white-paper.ps.gz
+     -and-
+   http://www.cis.ohio-state.edu/hypertext/faq/usenet/pdial/faq.html
+       (This last is a list of internet providers)
+
+
+See the file ./README for general information regarding PPP-2.2 for
+       all computer systems.
+See the file ./SETUP for general setup information for all computer systems.
+See the file ./NeXT/INSTALL for NeXT Specific installation instructions.
+See the file ./NeXT/README.NeXT for bugs.
+
+New to release 0.4.5 (LKS version 4.9 release1)
+======================================
+
+ * This release is based on the third beta release of
+   PPP-2.2 (ppp-2.2b3.tar.gz) by Paul Mackerras.  It will
+   probably be the version released along with PPP-2.2.
+
+ * Some enhancements to the Example ip-up and ip-down
+   scripts.
+
+ * Several documentation enhancements to support the
+   actual release.
+
+ * Removed the new locking code.  Temporarily, we continue
+   to rely on the old mechanism.
+
+ * This program runs on Intel, Moto, and Sparc.  It apparently
+   runs fine on HP until shutdown.  Then there appear to be problems.
+   Due to time constraints, this will have to be corrected as a patch.
+   As usual, this will be available on ftp.thoughtport.com:/pub/next/ppp/.
+
+
+New to release 0.4.4 (LKS version 4.5)
+======================================
+
+ * The netbuf queueing mechanism was significantly
+   simplified.  It is hoped that some HP memory
+   alignment problems were also solved.  This may
+   help solve some of the mysterious panics others have
+   seen.
+
+ * A new locking mechanism was implemented that
+   may simplify the spl() calls.
+
+ * Memory allocation in BSD Compress code was cleaned up in 
+   an attempt to solve HP alignment problems.  
+
+ * Thanks go to Pete French <pete@ohm.york.ac.uk> for all the 
+   above modifications
+
+New to release 0.4.3 (LKS version 4.4)
+======================================
+
+ * This release fixes some problems regarding
+   HP and SPARC support.  It is said to now run
+   on Sparc.  I would hope HP also but havn't heard
+   yet.  Thanks to Dave Hess <David-Hess@net.tamu.edu>
+   for finding the problems for Sparc.
+
+ * Minor documentation fixes.
+
+
+New to release 0.4.0 (LKS version 4.1 - summerb2)
+=================================================
+
+ * This release is based on the second beta release
+   of PPP-2.2 (ppp-2.2b2).
+
+ * The default chat is now the one supplied in the beta
+   PPP release.  This chat will compile fine using Dev 3.3.
+   However, if you are running Dev 3.2, you will not be able
+   to compile the default chat (POSIX problems).  In this case,
+   you may use the old chat (renamed as ./chat/chat.c.3.2).
+
+
+
+New to release 0.4.0 (LKS version 4.0 - summerb1)
+=================================================
+
+ * This release is based on the first beta release
+   of PPP-2.2 (ppp-2.2b1).
+
+ * Chat was updated in the new beta.  However, because
+   of broken posix functionality under NeXTSTEP (3.2) it 
+   will not compile properly.  Therefore, the old chat
+   is being used.  The newer chat is backed up as
+   ./chat/chat.c.orig.  Those with Dev 3.3 may wish to 
+   try to compile to see if the posix problems were fixed.
+
+ * Support for the Microsoft Call Back Configuration Protocol. 
+   See the file ./README.cbcp.
+
+
+
+New to release 0.3.0 (LKS version 3.0 - summera51)
+=====================================
+
+ * This release is the first to be based on the fifth alpha
+   release of PPP-2.2 (ppp-2.2a5).
+
+ * Major kernel revision.  This release attempts to merge
+   the LKS written by Perkins and that written by Prindeville/French.
+   The hope is that this new merged kernel will allow us to maintain
+   one set of sources.  This kernel, or a variant thereof, will
+   probably be the one that is released with the PPP-2.2 beta
+   distribution.
+
+ * Fixed a bug that caused problems with NXFax's capability
+   to determine port usage.
+
+ * Added support for the Berkley Packet Filter (BPF) and tcpdump.
+   Use of BPF requires special installation instructions.  See
+   the installation file for more info.
+
+ * Fixed a header include problem that kept sources from compiling
+   under NS 3.3 Dev. for m68k.  *Sigh* I guess support for m68k
+   continues to falter... :(
+
+ * Officially changed the name of the log file from:
+      /usr/adm/ppp2.2.debug
+             -to-
+      /usr/adm/ppp2.2.log
+   If you are upgrading, you should change the name of the file
+   in /etc/syslog.conf.  Remember to watch out for the tab character
+   and remember to create the initial file.  For more information see
+   ./NeXT/INSTALL.
+
+   This change was done so that the file could be opened from the
+   workspace.  There was a naming conflict with the .debug extension.
+   Note also, that this name is a bit different than that suggested in
+   the ./SETUP file.
+
+ * Fixed a problem with the pppd option 'local'.
+
+As part of a5:
+
+ * Fixed a bug in pppd that would allow service (under some circumstances)
+   to peers who refuse to authenticate.
+
+ * Fixed a bug with CCP negotiation. 
+
+ * Fixed a bug that caused negotation with an NT RAS PPP server to fail.
+  
+
+New to release 1.9 (LKS version 2.1)
+=====================================
+
+ * Support for NS Sparc has been added. Sparc users note, the SUN
+   serial driver in the pre-release was not very robust at high speeds.
+   This has been fixed for the final release.  This could cause problems
+   with testing on Sparc.  Low bps rates should be OK...like 2400 to
+   maybe 9600 with low system activity.  Thanks go to
+   John Landwehr <John_Landwehr@NeXT.COM> for this work.
+
+ * Fixed a nasty little bug that degraded performance of multiple
+   interfaces on Intel systems.
+
+ * Added support for IP address filtering.  This allows
+   detection and prevetion of IP address spoofing.  Check out
+   the new ./pppexclude directory.  Thanks to
+   Lawrence E. Freil <lef@woods.com> for this code.
+
+ * More support for multiple ppp connections to different
+   hosts.  Check out ./Examples/ppp_multiple_hosts.tar.gz.
+   Thanks to Jonathan Adams <jonathan@filoli.com> for this
+   code.
+
+ * Modified lock file for better UUCP interaction.  Special
+   thanks to Kim Shrier <kim@tinker.com> for this code.
+
+ * Fixed the new 3.3 multicast warning.
+
+ * Improved installation documentation.
+
+
+New to release 1.8 (LKS version 1.3)
+=====================================
+
+ * Moved to ppp-2.2a4, the fourth alpha release
+   from Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>.
+
+ * Fixed a bug that I introduced in 1.7 that could cause
+   kernel panics when BSD compression was used in conjunction
+   with VJ header compression.
+
+ * LKS Numbering Scheme changed (due to my screwup with a4 and CVS).
+
+ * Removed support for extra pppd option 'usepty'.  Can be done
+   with an external program if desired.
+
+ * Included the old modified pppstats.c that shows compression
+   statistics.
+
+New to release 1.7 (LKS version 1.31)
+=====================================
+
+ * Moved packet compression outside the interrupt handler.
+   Previously, only packet decompression was done outside.
+
+ * Made many enhancements as suggested by Paul Mackerras.
+
+ * Fixed a bug that sometimes caused "bad fcs" errors to panic
+   the machine.
+
+ * Fixed a problem that caused NFS traffic to force
+   compression to exit (and sometimes hang NFS).
+   NFS traffic works properly now (regardless of the buffer size
+   set via the NFSManager.app).
+
+ * Fixed a timeout problem in pppd that could sometimes cause
+   negotiations to loop endlessly.  This fix should eventually make
+   it into ppp2.2a4.
+
+ * Split code into multiple files for better organization.
+
+ * Fixed pppstats to show compression ratios on the proper
+   side.  Left side is for incoming packets and right side is
+   for outgoing packets.
+
+ * Added some suggested enhancements to
+   pppd.  These suggestions were brought up
+   on the ports mailing list and will probably
+   be included in ppp2.2a4.  I added them for 
+   the interrim.  They basically involve better permissions
+   for running the ip-up and ip-down scripts.  They are now run
+   as the effective user-id of pppd.  So if you run pppd suid,
+   root, then ip-up and ip-down are run as root.
+   
+ * Corrected several minor documentation problems.
+
+
+New to release 1.6 (LKS version 1.24)
+=====================================
+
+ * Added support for HP-PA systems.  Many thanks go to
+   Alain Fauconnet <af@biomath.jussieu.fr> for his efforts in this
+   work.
+
+ * Added further performance enhancements to the LKS.  This resulted
+   in fewer "silo overflows", and thus dropped packets, when operating
+   at high speed (>= 38.4KBS) sustained bidirectional transfers over
+   multiple interfaces.
+
+ * Updated the installation instructions.
+
+
+New to release 1.5 (LKS version 1.22)
+=====================================
+
+ * Not a real release.  Used for distributing
+   tests to HPPA users.
+
+
+New to release 1.4 (LKS version 1.18)
+=====================================
+
+ * Fixed problem that delayed many PPP protcol packets from timely
+   delivery to pppd.
+
+ * Added compression statistics support for pppstats.
+
+ * Cleaned up processor priority levels. 
+
+ * Added better support for netbuf queue monitoring.
+
+
+New to release 1.3 (LKS version 1.16)
+=====================================
+
+ * At compile time, you have the option to decompress VJ/BSD
+   packets either inside or outside the interrupt handler.
+   See the DECOMP_OUT flag in ./NeXT/Makefile.  The old 
+   functionality was to do the work inside the interrupt
+   handler.  It is probably more appropriate to do it
+   outside. Thanks to Pete French <pete@ohm.york.ac.uk> for
+   discussion on this topic.
+
+ * Added initial support for operation over pseudo
+   ttys.  See the USEPTY flag in ./pppd/Makefile.NeXT.
+   This adds a new option to pppd, "usepty <hostname>".
+   If this option is used, pppd will fire up an rlogin
+   session to <hostname>.  You may then use chat as normal
+   to start the remote ppp.  Thereafter, the packets flow
+   over the rlogin session.  This may potentially be used
+   to start a new ppp session over an open ppp session.
+
+ * Added enhancements and changes suggested for ppp-2.2a3.
+   This includes some fixes to the BSD compression code
+   that caused it to turn off compression inappropriately
+   under error conditions.
+
+ * Patched pppd to better support code that sleeps but never
+   wakes in ip-up scripts.  Thanks to longyear@netcom.com 
+   (Al Longyear) and Bill Hay <wish@dumain.demon.co.uk>.
+
+ * Did more verification with the full version of NXFAX installed. 
+   Seems to work flawlessly!  Thanks to Rick Damon <nxfax@bandw.com>
+   at Black and White for his help in the matter.
+
+ * Added a new 'Examples' directory to the hierarchy.  This
+   will become a collecting place for user info.
+
+
+
+New to release 1.2 (LKS version 1.13)
+=====================================
+
+ * The system now supports BSD Packet compression using the new CCP.
+   Of course, both ends must negotiate this option.
+
+
+New to release 1.1
+==================
+
+ * The system now works with the MuX serial driver V1.5. Probably 
+   version 1.4 also.  No changes need to be made to the MuX buffer
+   (and DOUBLE_BUFFER) values. 
+
+ * The system now works when NXFax is installed.
+
+ * There have been some internal optimizations for those
+   who use the NeXT supplied serial drivers.
+
+
+New to release 1.0
+==================
+
+ * On Intel systems, some ioctl calls did not return the proper value.
+   This turned out to be a bug in the OS.  A true workaround has been
+   implemented.  The ioctl return value macro is now only used to 
+   check for return value errors.  Flags are now correctly set without
+   the macro.
+
+ * Multiple interfaces now work properly.  The ioctl fix above solved
+   the problem of a second interface "stealing" the first interface.
+
+ * lcp-echo-failure works.
+
+ * We are now using the default pppstats.  This was modified to 
+   use an ioctl to get information.  One less program we have to 
+   support.  pppstats no longer requires the SUID bit or the loadable.
+
+ * We are now using the default VJ compression code.  Another
+   file we do not have to support.
+
+ * PPP-2.2 uses a new mechanism for determining when to kill pppd.
+   This should solve the process group problems we have been
+   experiencing.
+
+ * Compression is not yet implemented.  This release should give you
+   the same (but more stable) functionality as the ppp-2.1.2 release.
+
+
+
+For problems, please mail nextppp@listproc.thoughtport.com.  Make
+sure you read the TROUBLESHOOTING section in ./NeXT/INSTALL so that
+you send all the appropriate information.  Further, there is an
+extensive FAQ available at:
+  http://www.thoughtport.com:8080/PPP/
+
+
+
diff --git a/chat/Makefile.NeXT b/chat/Makefile.NeXT
new file mode 100644 (file)
index 0000000..799371f
--- /dev/null
@@ -0,0 +1,43 @@
+#
+# Makefile for chat on NeXTs
+# 
+# $Id: Makefile.NeXT,v 1.1 1995/08/10 06:48:28 paulus Exp $
+#
+
+ARCHFLAGS = -arch i386 -arch m68k
+BINDIR = /usr/local/ppp/bin
+MANDIR = /usr/local/ppp/man
+
+CFLAGS=        -O -posix $(ARCHFLAGS)
+
+SRCS =  chat.c
+OBJS =  chat.o
+
+MANPAGES = chat.8
+
+
+#
+# Load dependencies
+#
+all:   chat
+
+chat:  $(OBJS)
+       $(CC) -o chat $(CFLAGS) $(OBJS)
+
+install:
+       /bin/mkdirs $(MANDIR)/man8 $(BINDIR) 
+       install -c -s -m 555 -o root -g wheel chat $(BINDIR)/chat
+       install -c -m 444 -o root -g wheel chat.8 $(MANDIR)/man8
+
+clean:
+       rm -f *~ *.o chat .depend
+
+depend:
+       cc -M $(CFLAGS) $(SRCS) > .depend
+
+#.depend:      $(SRCS)
+#      @echo Check dependencies if needed
+
+#      cc -M $(CFLAGS) $(SRCS) > .depend
+
+#include       .depend
diff --git a/pppd/Makefile.NeXT b/pppd/Makefile.NeXT
new file mode 100644 (file)
index 0000000..7e8ab81
--- /dev/null
@@ -0,0 +1,81 @@
+#
+# pppd makefile for NeXT
+#
+# $Orignial: Makefile.ultrix,v 1.4 1994/09/01 00:40:40 paulus Exp $
+# $Id: Makefile.NeXT,v 1.1 1995/08/10 06:48:33 paulus Exp $
+#
+
+ARCHFLAGS = -arch i386 -arch m68k -arch hppa -arch sparc
+#ARCHFLAGS = -arch i386 -arch m68k
+BINDIR = /usr/local/ppp/bin
+MANDIR = /usr/local/ppp/man
+
+PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
+       auth.c options.c sys-bsd.c sys-str.c sys-ultrix.c \
+       sys-linux.c lock.c
+HEADERS = callout.h pathnames.h patchlevel.h chap.h md5.h
+MANPAGES = pppd.8
+
+PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
+       auth.o options.o sys-NeXT.o
+
+# CC = gcc
+DEBUG_FLAGS = -O -posix $(ARCHFLAGS)
+
+
+#
+# If you use white hardware, uncomment this line to get 
+# around an apparent bug with ioctl.  See sys-NeXT.c for
+# more information.  OK on black, but not necessary.
+# Further, only necessary if you are using the NeXT supplied
+# serial drivers.  The MuX driver works flawlessly (and faster).
+# The new NeXT serial drivers put on NeXTAnswers also work flawlessly.
+#
+# For HPPA and SPARC, define FIXSIGS to get around posix bugs in
+# OS release 3.2.  Problems are supposed to be fixed
+# in release 3.3 (but at least for Sparc don't appear to be).
+#
+#
+
+COMPILE_FLAGS = -DNO_DRAND48 -DHAS_BROKEN_IOCTL \
+       -DDEBUGUPAP -DDEBUGCHAP -DDEBUGLCP -DDEBUGIPCP \
+       -DFIXSIGS
+
+
+COPTS = -O
+LIBS =
+
+CFLAGS = -I../NeXT -I.. $(COPTS) $(DEBUG_FLAGS) $(COMPILE_FLAGS)
+
+SOURCE= RELNOTES Makefile \
+       $(PPPDSRCS) $(HEADERS) $(MANPAGES)
+
+all: pppd
+
+install:
+       /bin/mkdirs $(MANDIR)/man8 $(BINDIR) 
+       install -c -s -m 4511 -o root -g daemon pppd $(BINDIR)/pppd
+       install -c -m  444 -o root -g wheel pppd.8 $(MANDIR)/man8
+
+pppd: $(PPPDOBJS)
+       $(CC) $(CFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
+
+pppd.tar: $(SOURCE)
+       tar -cvf pppd.tar $(SOURCE)
+
+pppd.tar.Z: pppd.tar
+       compress pppd.tar
+
+clean:
+       rm -f $(PPPDOBJS) pppd *~ #* core
+
+depend:
+       cpp -M $(CFLAGS) $(PPPDSRCS) >.depend
+#      makedepend $(CFLAGS) $(PPPDSRCS)
+
+saber_pppd:
+       #setopt load_flags $(CFLAGS)
+       #setopt ansi
+       #suppress 452 md5.c
+       #load $(PPPDSRCS)
+
diff --git a/pppd/sys-NeXT.c b/pppd/sys-NeXT.c
new file mode 100644 (file)
index 0000000..a23f611
--- /dev/null
@@ -0,0 +1,1351 @@
+/*
+ * sys-next.c - System-dependent procedures for setting up
+ * PPP interfaces on NeXT 3.2/3.3  systems
+ *
+ * Copyright (c) 1989 Carnegie Mellon University.
+ * Copyright (c) 1994 Philippe-Andre Prindeville.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Carnegie Mellon University.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef lint
+static char rcsid[] = "$Id: sys-NeXT.c,v 1.1 1995/08/10 06:48:34 paulus Exp $";
+#endif
+
+#include <stdio.h>
+#include <syslog.h>
+#include <termios.h>
+#include <utmp.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <strings.h>
+#include <sys/types.h>
+#include <sys/file.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/errno.h>
+#include <sys/stat.h>
+#include <sys/fcntl.h>
+
+#include <net/if.h>
+#include <net/ppp_defs.h>
+#include <net/if_ppp.h>
+#include <netdb.h>
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/in_var.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+#include <net/route.h>
+#include <netinet/in.h>
+
+#include <netinfo/ni.h>
+
+#include "pppd.h"
+
+static int initdisc = -1;      /* Initial TTY discipline */
+
+extern int errno;
+
+static int     restore_term;   /* 1 => we've munged the terminal */
+static struct termios inittermios; /* Initial TTY termios */
+
+static char *lock_file;
+
+int sockfd;                    /* socket for doing interface ioctls */
+
+#if defined(i386) && defined(HAS_BROKEN_IOCTL)
+#define        ioctl   myioctl
+#endif
+
+/*
+ * sys_init - System-dependent initialization.
+ */
+void
+sys_init()
+{
+    openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
+    setlogmask(LOG_UPTO(LOG_INFO));
+    if (debug)
+       setlogmask(LOG_UPTO(LOG_DEBUG));
+
+    /* Get an internet socket for doing socket ioctl's on. */
+    if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+       syslog(LOG_ERR, "Couldn't create IP socket: %m");
+       die(1);
+    }
+}
+
+/*
+ * note_debug_level - note a change in the debug level.
+ */
+void
+note_debug_level()
+{
+    if (debug) {
+       syslog(LOG_INFO, "Debug turned ON, Level %d", debug);
+       setlogmask(LOG_UPTO(LOG_DEBUG));
+    } else {
+       setlogmask(LOG_UPTO(LOG_WARNING));
+    }
+}
+
+/*
+ * ppp_available - check whether the system has any ppp interfaces
+ * (in fact we check whether we can do an ioctl on ppp0).
+ */
+int
+ppp_available()
+{
+    int s, ok;
+    struct ifreq ifr;
+
+    if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
+       return 1;               /* can't tell - maybe we're not root */
+
+    strncpy(ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
+    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
+    close(s);
+
+    return ok;
+}
+
+/*
+ * establish_ppp - Turn the serial port into a ppp interface.
+ */
+void
+establish_ppp()
+{
+    int pppdisc = PPPDISC;
+    int x;
+
+    if (ioctl(fd, TIOCGETD, &initdisc) < 0) {
+       syslog(LOG_ERR, "ioctl(TIOCGETD): %m");
+       die(1);
+    }
+    if (ioctl(fd, TIOCSETD, &pppdisc) < 0) {
+       syslog(LOG_ERR, "ioctl(establish TIOCSETD): %m");
+       die(1);
+    }
+
+    /*
+     * Find out which interface we were given.
+     */
+    if (ioctl(fd, PPPIOCGUNIT, &ifunit) < 0) { 
+       syslog(LOG_ERR, "ioctl(PPPIOCGUNIT): %m");
+       die(1);
+    }
+
+    /*
+     * Enable debug in the driver if requested.
+     */
+    if (kdebugflag) {
+       if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+           syslog(LOG_WARNING, "ioctl(PPPIOCGFLAGS): %m");
+       } else {
+           x |= (kdebugflag & 0xFF) * SC_DEBUG;
+           if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0)
+               syslog(LOG_WARNING, "ioctl(PPPIOCSFLAGS): %m");
+       }
+    }
+}
+
+
+/*
+ * disestablish_ppp - Restore the serial port to normal operation.
+ * This shouldn't call die() because it's called from die().
+ */
+void
+disestablish_ppp()
+{
+    int x;
+    char *s;
+
+    if (initdisc >= 0) {
+       /*
+        * Check whether the link seems not to be 8-bit clean.
+        */
+       if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
+           s = NULL;
+           switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
+           case SC_RCV_B7_0:
+               s = "bit 7 set to 1";
+               break;
+           case SC_RCV_B7_1:
+               s = "bit 7 set to 0";
+               break;
+           case SC_RCV_EVNP:
+               s = "odd parity";
+               break;
+           case SC_RCV_ODDP:
+               s = "even parity";
+               break;
+           }
+           if (s != NULL) {
+               syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
+               syslog(LOG_WARNING, "All received characters had %s", s);
+           }
+       }
+       if (ioctl(fd, TIOCSETD, &initdisc) < 0)
+           syslog(LOG_ERR, "ioctl(disestablish TIOCSETD): %m");
+    }
+}
+
+/*
+ * List of valid speeds.
+ */
+struct speed {
+    int speed_int, speed_val;
+} speeds[] = {
+#ifdef B50
+    { 50, B50 },
+#endif
+#ifdef B75
+    { 75, B75 },
+#endif
+#ifdef B110
+    { 110, B110 },
+#endif
+#ifdef B134
+    { 134, B134 },
+#endif
+#ifdef B150
+    { 150, B150 },
+#endif
+#ifdef B200
+    { 200, B200 },
+#endif
+#ifdef B300
+    { 300, B300 },
+#endif
+#ifdef B600
+    { 600, B600 },
+#endif
+#ifdef B1200
+    { 1200, B1200 },
+#endif
+#ifdef B1800
+    { 1800, B1800 },
+#endif
+#ifdef B2000
+    { 2000, B2000 },
+#endif
+#ifdef B2400
+    { 2400, B2400 },
+#endif
+#ifdef B3600
+    { 3600, B3600 },
+#endif
+#ifdef B4800
+    { 4800, B4800 },
+#endif
+#ifdef B7200
+    { 7200, B7200 },
+#endif
+#ifdef B9600
+    { 9600, B9600 },
+#endif
+#ifdef B19200
+    { 19200, B19200 },
+#endif
+#ifdef B38400
+    { 38400, B38400 },
+#endif
+#ifdef EXTA
+    { 19200, EXTA },
+#endif
+#ifdef EXTB
+    { 38400, EXTB },
+#endif
+#ifdef B14400
+    { 14400, B14400 },
+#endif
+#ifdef B28800
+    { 28800, B28800 },
+#endif
+#ifdef B43200
+    { 43200, B43200 },
+#endif
+#ifdef B57600
+    { 57600, B57600 },
+#endif
+#ifdef B115200
+    { 115200, B115200 },
+#endif
+    { 0, 0 }
+};
+
+/*
+ * Translate from bits/second to a speed_t.
+ */
+int
+translate_speed(bps)
+    int bps;
+{
+    struct speed *speedp;
+
+    if (bps == 0)
+       return 0;
+    for (speedp = speeds; speedp->speed_int; speedp++)
+       if (bps == speedp->speed_int)
+           return speedp->speed_val;
+    syslog(LOG_WARNING, "speed %d not supported", bps);
+    return 0;
+}
+
+/*
+ * Translate from a speed_t to bits/second.
+ */
+int
+baud_rate_of(speed)
+    int speed;
+{
+    struct speed *speedp;
+
+    if (speed == 0)
+       return 0;
+    for (speedp = speeds; speedp->speed_int; speedp++)
+       if (speed == speedp->speed_val)
+           return speedp->speed_int;
+    return 0;
+}
+
+
+/*
+ * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
+ * at the requested speed, etc.  If `local' is true, set CLOCAL
+ * regardless of whether the modem option was specified.
+ */
+set_up_tty(fd, local)
+    int fd, local;
+{
+    int speed, x, modembits;
+    struct termios tios;
+
+    if (tcgetattr(fd, &tios) < 0) {
+       syslog(LOG_ERR, "tcgetattr: %m");
+       die(1);
+    }
+
+    if (!restore_term)
+       inittermios = tios;
+
+    tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
+
+    tios.c_cflag |= CS8 | CREAD | HUPCL;
+    if (local || !modem)
+       tios.c_cflag |= CLOCAL;
+    tios.c_iflag = IGNBRK | IGNPAR;
+    tios.c_oflag = 0;
+    tios.c_lflag = 0;
+    tios.c_cc[VMIN] = 1;
+    tios.c_cc[VTIME] = 0;
+
+    if (crtscts == 2) {
+       tios.c_iflag |= IXOFF;
+       tios.c_cc[VSTOP] = 0x13;        /* DC3 = XOFF = ^S */
+       tios.c_cc[VSTART] = 0x11;       /* DC1 = XON  = ^Q */
+    }
+
+    speed = translate_speed(inspeed);
+    if (speed) {
+       cfsetospeed(&tios, speed);
+       cfsetispeed(&tios, speed);
+    } else {
+       speed = cfgetospeed(&tios);
+    }
+
+    if (modem) {
+      modembits = TIOCM_RTS | TIOCM_CTS;
+      if (ioctl(fd, (crtscts ? TIOCMBIS : TIOCMBIC), &modembits) < 0)
+       syslog(LOG_ERR, "ioctl: TIOCMBIS/BIC: %m");
+    }
+
+    if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
+       syslog(LOG_ERR, "tcsetattr: %m");
+       die(1);
+    }
+
+   baud_rate = inspeed = baud_rate_of(speed);
+   restore_term = 1;
+}
+
+/*
+ * restore_tty - restore the terminal to the saved settings.
+ */
+void
+restore_tty()
+{
+    if (restore_term) {
+       if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
+           if (errno != ENXIO)
+               syslog(LOG_WARNING, "tcsetattr: %m");
+       restore_term = 0;
+    }
+}
+
+/*
+ * setdtr - control the DTR line on the serial port.
+ * This is called from die(), so it shouldn't call die().
+ *
+ * The write hack is to get NXFax to recognize that there is
+ * activity on the port.  Not using the write nukes
+ * NXFax's capability to determine port usage.
+ *
+ */
+setdtr(fd, on)
+int fd, on;
+{
+    int modembits = TIOCM_DTR;
+
+    if (!on)
+      {
+       write(fd, " ", 1);
+       sleep(1);
+      }
+
+/*    ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits); */
+    ioctl(fd, (on? TIOCSDTR: TIOCCDTR), 0);
+}
+
+
+/*
+ * output - Output PPP packet.
+ */
+void
+output(unit, p, len)
+    int unit;
+    u_char *p;
+    int len;
+{
+    if (unit != 0)
+       MAINDEBUG((LOG_WARNING, "output: unit != 0!"));
+    if (debug)
+       log_packet(p, len, "sent ");
+
+    if (write(fd, p, len) < 0) {
+       syslog(LOG_ERR, "write: %m");
+       die(1);
+    }
+}
+
+
+/*
+ * wait_input - wait until there is data available on fd,
+ * for the length of time specified by *timo (indefinite
+ * if timo is NULL).
+ */
+wait_input(timo)
+    struct timeval *timo;
+{
+    fd_set ready;
+    int n;
+
+    FD_ZERO(&ready);
+    FD_SET(fd, &ready);
+    n = select(fd+1, &ready, NULL, &ready, timo);
+    if (n < 0 && errno != EINTR) {
+       syslog(LOG_ERR, "select: %m");
+       die(1);
+    }
+}
+
+
+/*
+ * read_packet - get a PPP packet from the serial device.
+ */
+int
+read_packet(buf)
+    u_char *buf;
+{
+    int len;
+
+    if ((len = read(fd, buf, PPP_MTU + PPP_HDRLEN)) < 0) {
+       if (errno == EWOULDBLOCK || errno == EINTR) {
+           MAINDEBUG((LOG_DEBUG, "read(fd): %m"));
+           return -1;
+       }
+       syslog(LOG_ERR, "read(fd): %m");
+       die(1);
+    }
+    return len;
+}
+
+
+/*
+ * ppp_send_config - configure the transmit characteristics of
+ * the ppp interface.
+ */
+void
+ppp_send_config(unit, mtu, asyncmap, pcomp, accomp)
+    int unit, mtu;
+    u_int32_t asyncmap;
+    int pcomp, accomp;
+{
+    u_int x;
+    struct ifreq ifr;
+
+    strncpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
+    ifr.ifr_mtu = mtu;
+    if (ioctl(sockfd, SIOCSIFMTU, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCSIFMTU): %m");
+       quit();
+    }
+
+    if (ioctl(fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSASYNCMAP): %m");
+       quit();
+    }
+
+    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCGFLAGS): %m");
+       quit();
+    }
+    x = pcomp? x | SC_COMP_PROT: x &~ SC_COMP_PROT;
+    x = accomp? x | SC_COMP_AC: x &~ SC_COMP_AC;
+    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+       quit();
+    }
+}
+
+
+/*
+ * ppp_set_xaccm - set the extended transmit ACCM for the interface.
+ */
+void
+ppp_set_xaccm(unit, accm)
+    int unit;
+    ext_accm accm;
+{
+    if (ioctl(fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY)
+       syslog(LOG_WARNING, "ioctl(PPPIOCSXASYNCMAP): %m");
+}
+
+
+/*
+ * ppp_recv_config - configure the receive-side characteristics of
+ * the ppp interface.
+ */
+void
+ppp_recv_config(unit, mru, asyncmap, pcomp, accomp)
+    int unit, mru;
+    u_int32_t asyncmap;
+    int pcomp, accomp;
+{
+    int x;
+
+    if (ioctl(fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSMRU): %m");
+       quit();
+    }
+    if (ioctl(fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSRASYNCMAP): %m");
+       quit();
+    }
+    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCGFLAGS): %m");
+       quit();
+    }
+    x = !accomp? x | SC_REJ_COMP_AC: x &~ SC_REJ_COMP_AC;
+    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+       quit();
+    }
+}
+
+/*
+ * ccp_test - ask kernel whether a given compression method
+ * is acceptable for use.
+ */
+ccp_test(unit, opt_ptr, opt_len, for_transmit)
+    int unit, opt_len, for_transmit;
+    u_char *opt_ptr;
+{
+    struct ppp_option_data data;
+
+    data.ptr = opt_ptr;
+    data.length = opt_len;
+    data.transmit = for_transmit;
+    return ioctl(fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0;
+}
+
+/*
+ * ccp_flags_set - inform kernel about the current state of CCP.
+ */
+void
+ccp_flags_set(unit, isopen, isup)
+    int unit, isopen, isup;
+{
+    int x;
+
+    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCGFLAGS): %m");
+       return;
+    }
+    x = isopen? x | SC_CCP_OPEN: x &~ SC_CCP_OPEN;
+    x = isup? x | SC_CCP_UP: x &~ SC_CCP_UP;
+    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0)
+       syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+}
+
+/*
+ * ccp_fatal_error - returns 1 if decompression was disabled as a
+ * result of an error detected after decompression of a packet,
+ * 0 otherwise.  This is necessary because of patent nonsense.
+ */
+int
+ccp_fatal_error(unit)
+    int unit;
+{
+    int x;
+
+    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCGFLAGS): %m");
+       return 0;
+    }
+    return x & SC_DC_FERROR;
+}
+
+/*
+ * sifvjcomp - config tcp header compression
+ */
+int
+sifvjcomp(u, vjcomp, cidcomp, maxcid)
+    int u, vjcomp, cidcomp, maxcid;
+{
+    u_int x;
+
+    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPIOCGFLAGS): %m");
+       return 0;
+    }
+    x = vjcomp ? x | SC_COMP_TCP: x &~ SC_COMP_TCP;
+    x = cidcomp? x & ~SC_NO_TCP_CCID: x | SC_NO_TCP_CCID;
+    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+       return 0;
+    }
+    if (ioctl(fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
+       syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+       return 0;
+    }
+    return 1;
+}
+
+/*
+ * sifup - Config the interface up and enable IP packets to pass.
+ */
+#ifndef SC_ENABLE_IP
+#define SC_ENABLE_IP   0x100   /* compat for old versions of kernel code */
+#endif
+
+int
+sifup(u)
+    int u;
+{
+    struct ifreq ifr;
+    u_int x;
+    struct npioctl npi;
+
+    strncpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
+    if (ioctl(sockfd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl (SIOCGIFFLAGS): %m");
+       return 0;
+    }
+    ifr.ifr_flags |= IFF_UP;
+    if (ioctl(sockfd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCSIFFLAGS): %m");
+       return 0;
+    }
+    npi.protocol = PPP_IP;
+    npi.mode = NPMODE_PASS;
+    if (ioctl(fd, PPPIOCSNPMODE, &npi) < 0) {
+       if (errno != ENOTTY) {
+           syslog(LOG_ERR, "ioctl(PPPIOCSNPMODE): %m");
+           return 0;
+       }
+       /* for backwards compatibility */
+       if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+           syslog(LOG_ERR, "ioctl (PPPIOCGFLAGS): %m");
+           return 0;
+       }
+       x |= SC_ENABLE_IP;
+       if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
+           syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+           return 0;
+       }
+    }
+    return 1;
+}
+
+/*
+ * sifdown - Config the interface down and disable IP.
+ */
+int
+sifdown(u)
+    int u;
+{
+    struct ifreq ifr;
+    u_int x;
+    int rv;
+    struct npioctl npi;
+
+    rv = 1;
+    npi.protocol = PPP_IP;
+    npi.mode = NPMODE_ERROR;
+    if (ioctl(fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
+       if (errno != ENOTTY) {
+           syslog(LOG_ERR, "ioctl(PPPIOCSNPMODE): %m");
+           rv = 0;
+       } else {
+           /* backwards compatibility */
+           if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &x) < 0) {
+               syslog(LOG_ERR, "ioctl (PPPIOCGFLAGS): %m");
+               rv = 0;
+           } else {
+               x &= ~SC_ENABLE_IP;
+               if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &x) < 0) {
+                   syslog(LOG_ERR, "ioctl(PPPIOCSFLAGS): %m");
+                   rv = 0;
+               }
+           }
+       }
+    }
+
+    strncpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
+    if (ioctl(sockfd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl (SIOCGIFFLAGS): %m");
+       rv = 0;
+    } else {
+       ifr.ifr_flags &= ~IFF_UP;
+       if (ioctl(sockfd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
+           syslog(LOG_ERR, "ioctl(SIOCSIFFLAGS): %m");
+           rv = 0;
+       }
+    }
+    return rv;
+}
+
+/*
+ * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
+ * if it exists.
+ */
+#define SET_SA_FAMILY(addr, family)            \
+    BZERO((char *) &(addr), sizeof(addr));     \
+    addr.sa_family = (family); 
+
+/*
+ * sifaddr - Config the interface IP addresses and netmask.
+ */
+int
+sifaddr(u, o, h, m)
+    int u;
+    u_int32_t o, h, m;
+{
+    int ret;
+    struct ifreq ifr;
+
+    ret = 1;
+    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
+    SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
+    ((struct sockaddr_in *) &ifr.ifr_addr)->sin_addr.s_addr = o;
+    if (ioctl(sockfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCAIFADDR): %m");
+       ret = 0;
+    }
+    ((struct sockaddr_in *) &ifr.ifr_dstaddr)->sin_addr.s_addr = h;
+    if (ioctl(sockfd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCSIFDSTADDR): %m");
+       ret = 0;
+    }
+    if (m != 0) {
+       ((struct sockaddr_in *) &ifr.ifr_addr)->sin_addr.s_addr = m;
+       syslog(LOG_INFO, "Setting interface mask to %s\n", ip_ntoa(m));
+       if (ioctl(sockfd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
+           syslog(LOG_ERR, "ioctl(SIOCSIFNETMASK): %m");
+           ret = 0;
+       }
+    }
+    return ret;
+}
+
+/*
+ * cifaddr - Clear the interface IP addresses, and delete routes
+ * through the interface if possible.
+ *
+ * N.B.: under NextStep, you can't *delete* an address on an interface,
+ * so we change it to 0.0.0.0...  A real hack.  But it simplifies
+ * reconnection on the server side.
+ */
+int
+cifaddr(u, o, h)
+    int u;
+    u_int32_t o, h;
+{
+    struct rtentry rt;
+
+#if 1
+    h = o = 0L;
+    (void) sifaddr(u, o, h, 0L);
+#endif
+    SET_SA_FAMILY(rt.rt_dst, AF_INET);
+    ((struct sockaddr_in *) &rt.rt_dst)->sin_addr.s_addr = h;
+    SET_SA_FAMILY(rt.rt_gateway, AF_INET);
+    ((struct sockaddr_in *) &rt.rt_gateway)->sin_addr.s_addr = o;
+    rt.rt_flags = RTF_HOST;
+    if (ioctl(sockfd, SIOCDELRT, (caddr_t) &rt) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCDELRT): %m");
+       return 0;
+    }
+    return 1;
+}
+
+/*
+ * sifdefaultroute - assign a default route through the address given.
+ */
+int
+sifdefaultroute(u, g)
+    int u;
+    u_int32_t g;
+{
+    return dodefaultroute(g, 's');
+}
+
+/*
+ * cifdefaultroute - delete a default route through the address given.
+ */
+int
+cifdefaultroute(u, g)
+    int u;
+    u_int32_t g;
+{
+    return dodefaultroute(g, 'c');
+}
+
+/*
+ * dodefaultroute - talk to a routing socket to add/delete a default route.
+ */
+int
+dodefaultroute(g, cmd)
+    u_int32_t g;
+    int cmd;
+{
+    struct rtentry rt;
+
+    SET_SA_FAMILY(rt.rt_dst, AF_INET);
+    ((struct sockaddr_in *) &rt.rt_dst)->sin_addr.s_addr = 0L;
+    SET_SA_FAMILY(rt.rt_gateway, AF_INET);
+    ((struct sockaddr_in *) &rt.rt_gateway)->sin_addr.s_addr = g;
+    rt.rt_flags = RTF_GATEWAY;
+    if (ioctl(sockfd, (cmd == 's') ? SIOCADDRT : SIOCDELRT, &rt) < 0) {
+       syslog(LOG_ERR, "%cifdefaultroute: ioctl(%s): %m", cmd,
+              (cmd == 's') ? "SIOCADDRT" : "SIOCDELRT");
+       return 0;
+    }
+    return 1;
+}
+
+/*
+ * sifproxyarp - Make a proxy ARP entry for the peer.
+ */
+int
+sifproxyarp(unit, hisaddr)
+    int unit;
+    u_int32_t hisaddr;
+{
+    struct arpreq arpreq;
+
+    BZERO(&arpreq, sizeof(arpreq));
+
+    /*
+     * Get the hardware address of an interface on the same subnet
+     * as our local address.
+     */
+    if (!get_ether_addr(hisaddr, &arpreq.arp_ha)) {
+       syslog(LOG_ERR, "Cannot determine ethernet address for proxy ARP");
+       return 0;
+    }
+
+    SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
+    ((struct sockaddr_in *) &arpreq.arp_pa)->sin_addr.s_addr = hisaddr;
+    arpreq.arp_flags = ATF_PERM | ATF_PUBL;
+    if (ioctl(sockfd, SIOCSARP, (caddr_t)&arpreq) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCSARP): %m");
+       return 0;
+    }
+
+    return 1;
+}
+
+/*
+ * cifproxyarp - Delete the proxy ARP entry for the peer.
+ */
+int
+cifproxyarp(unit, hisaddr)
+    int unit;
+    u_int32_t hisaddr;
+{
+    struct arpreq arpreq;
+
+    BZERO(&arpreq, sizeof(arpreq));
+    SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
+    ((struct sockaddr_in *) &arpreq.arp_pa)->sin_addr.s_addr = hisaddr;
+    if (ioctl(sockfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
+       syslog(LOG_WARNING, "ioctl(SIOCDARP): %m");
+       return 0;
+    }
+    return 1;
+}
+
+/*
+ * get_ether_addr - get the hardware address of an interface on the
+ * the same subnet as ipaddr.
+ */
+#define MAX_IFS                32
+
+int
+get_ether_addr(ipaddr, hwaddr)
+    u_int32_t ipaddr;
+    struct sockaddr *hwaddr;
+{
+    struct ifreq *ifr, *ifend, *ifp;
+    u_int32_t ina, mask;
+    struct ether_addr dla;
+    struct ifreq ifreq;
+    struct ifconf ifc;
+    struct ifreq ifs[MAX_IFS];
+    struct hostent *hostent;
+
+    ifc.ifc_len = sizeof(ifs);
+    ifc.ifc_req = ifs;
+    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
+       syslog(LOG_ERR, "ioctl(SIOCGIFCONF): %m");
+       return 0;
+    }
+
+    /*
+     * Scan through looking for an interface with an Internet
+     * address on the same subnet as `ipaddr'.
+     */
+    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
+    for (ifr = ifc.ifc_req; ifr < ifend; ifr = (struct ifreq *)
+               ((char *)&ifr->ifr_addr + sizeof(struct sockaddr))) {
+       if (ifr->ifr_addr.sa_family == AF_INET) {
+           ina = ((struct sockaddr_in *) &ifr->ifr_addr)->sin_addr.s_addr;
+           strncpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
+           /*
+            * Check that the interface is up, and not point-to-point
+            * or loopback.
+            */
+           if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
+               continue;
+           if ((ifreq.ifr_flags &
+                (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
+                != (IFF_UP|IFF_BROADCAST))
+               continue;
+           /*
+            * Get its netmask and check that it's on the right subnet.
+            */
+           if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
+               continue;
+           mask = ((struct sockaddr_in*)&ifreq.ifr_addr)->sin_addr.s_addr;
+           if ((ipaddr & mask) != (ina & mask))
+               continue;
+
+           break;
+       }
+    }
+
+    if (ifr >= ifend)
+       return 0;
+    syslog(LOG_INFO, "found interface %s for proxy arp", ifr->ifr_name);
+
+    /*
+     * Get the hostname and look for an entry using the ethers database.
+     * Under NeXTStep this is the best we can do for now.
+     */
+    if ((hostent = gethostbyaddr((char*)&ina, sizeof(ina), AF_INET)) == NULL)
+       return 0;
+
+    if (ether_by_host(hostent->h_name, &dla)) {
+       syslog(LOG_INFO, "Add entry for %s in /etc/ethers", hostent->h_name);
+       return 0;       /* it's not there */
+    }
+    hwaddr->sa_family = AF_UNSPEC;
+    BCOPY(&dla, hwaddr->sa_data, sizeof(dla));
+    return 1;
+}
+
+int
+ether_by_host(hostname, etherptr)
+    char *hostname;
+    struct ether_addr *etherptr;
+{
+    struct ether_addr *thisptr;
+    void *conn;
+    ni_id root;
+    ni_namelist val;
+    char path[256];
+
+    if (!ether_hostton(hostname, etherptr))
+       return 0;
+    /*
+     * We shall now try and
+     * find the address in the
+     * top domain of netinfo.
+     */
+    strcat(strcpy(path, "/machines/"), hostname);
+
+    if (ni_open((void *)0, "/", &conn)
+     || ni_root(conn, &root)
+     || ni_pathsearch(conn, &root, path)
+     || ni_lookupprop(conn, &root, "en_address", &val))
+       return 1;
+
+    /*
+     * Now we can convert the returned string into an ethernet address.
+     */
+    strcpy(path, val.ni_namelist_val[0]);
+    ni_free(conn);
+    if ((thisptr = (struct ether_addr*)ether_aton(path)) == NULL)
+       return 1;
+    BCOPY(thisptr, etherptr, sizeof(struct ether_addr));
+    return 0;
+}
+
+
+
+/*
+ * Return user specified netmask, modified by any mask we might determine
+ * for address `addr' (in network byte order).
+ * Here we scan through the system's list of interfaces, looking for
+ * any non-point-to-point interfaces which might appear to be on the same
+ * network as `addr'.  If we find any, we OR in their netmask to the
+ * user-specified netmask.
+ */
+u_int32_t
+GetMask(addr)
+    u_int32_t addr;
+{
+    u_int32_t mask, nmask, ina;
+    struct ifreq *ifr, *ifend, ifreq;
+    struct ifconf ifc;
+    struct ifreq ifs[MAX_IFS];
+
+    addr = ntohl(addr);
+    if (IN_CLASSA(addr))       /* determine network mask for address class */
+       nmask = IN_CLASSA_NET;
+    else if (IN_CLASSB(addr))
+       nmask = IN_CLASSB_NET;
+    else
+       nmask = IN_CLASSC_NET;
+    /* class D nets are disallowed by bad_ip_adrs */
+    mask = netmask | htonl(nmask);
+
+    /*
+     * Scan through the system's network interfaces.
+     */
+    ifc.ifc_len = sizeof(ifs);
+    ifc.ifc_req = ifs;
+    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
+       syslog(LOG_WARNING, "ioctl(SIOCGIFCONF): %m");
+       return mask;
+    }
+    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
+    for (ifr = ifc.ifc_req; ifr < ifend; ifr = (struct ifreq *)
+               ((char *)&ifr->ifr_addr + sizeof(struct sockaddr))) {
+       /*
+        * Check the interface's internet address.
+        */
+       if (ifr->ifr_addr.sa_family != AF_INET)
+           continue;
+       ina = ((struct sockaddr_in *) &ifr->ifr_addr)->sin_addr.s_addr;
+       if ((ntohl(ina) & nmask) != (addr & nmask))
+           continue;
+       /*
+        * Check that the interface is up, and not point-to-point or loopback.
+        */
+       strncpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
+       if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
+           continue;
+       if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
+           != IFF_UP)
+           continue;
+       /*
+        * Get its netmask and OR it into our mask.
+        */
+       if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
+           continue;
+       mask |= ((struct sockaddr_in *)&ifreq.ifr_addr)->sin_addr.s_addr;
+    }
+
+    return mask;
+}
+
+
+
+/*
+ * daemon - Detach us from the terminal session.
+ */
+int
+daemon(nochdir, noclose)
+    int nochdir, noclose;
+{
+    int pid;
+
+    if ((pid = fork()) < 0)
+       return -1;
+    if (pid != 0)
+       exit(0);                /* parent dies */
+    (void)setsid();
+    if (!nochdir)
+       chdir("/");
+    if (!noclose) {
+       fclose(stdin);          /* don't need stdin, stdout, stderr */
+       fclose(stdout);
+       fclose(stderr);
+    }
+    return 0;
+}
+
+
+char *
+strdup(s)
+    const char *s;
+{
+    char *d = malloc(strlen(s) + 1);
+
+    if (d) strcpy(d, s);
+    return d;
+}
+
+/*
+ * This logwtmp() implementation is subject to the following copyright:
+ *
+ * Copyright (c) 1988 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#define WTMPFILE        "/usr/adm/wtmp"
+
+int
+logwtmp(line, name, host)
+    char *line, *name, *host;
+{
+    int fd;
+    struct stat buf;
+    struct utmp ut;
+
+    if ((fd = open(WTMPFILE, O_WRONLY|O_APPEND, 0)) < 0)
+       return;
+    if (!fstat(fd, &buf)) {
+       (void)strncpy(ut.ut_line, line, sizeof(ut.ut_line));
+       (void)strncpy(ut.ut_name, name, sizeof(ut.ut_name));
+       (void)strncpy(ut.ut_host, host, sizeof(ut.ut_host));
+       (void)time(&ut.ut_time);
+       if (write(fd, (char *)&ut, sizeof(struct utmp)) != sizeof(struct utmp))
+           (void)ftruncate(fd, buf.st_size);
+    }
+    close(fd);
+}
+
+/*
+ * Routines for locking and unlocking the serial device, moved here
+ * from chat.c.
+ */
+
+#define LOCK_PREFIX    "/usr/spool/uucp/LCK/LCK.."
+
+/*
+ * lock - create a lock file for the named device
+ */
+int
+lock(dev)
+    char *dev;
+{
+    int fd, pid, n;
+    char *p;
+
+    if ((p = strrchr(dev, '/')) != NULL)
+       dev = p + 1;
+    lock_file = malloc(strlen(LOCK_PREFIX) + strlen(dev) + 1);
+    if (lock_file == NULL)
+       novm("lock file name");
+    strcat(strcpy(lock_file, LOCK_PREFIX), dev);
+
+    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
+       if (errno == EEXIST
+           && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
+           /* Read the lock file to find out who has the device locked */
+           n = read(fd, &pid, sizeof(pid));
+           if (n <= 0) {
+               syslog(LOG_ERR, "Can't read pid from lock file %s", lock_file);
+               close(fd);
+           } else {
+               if (kill(pid, 0) == -1 && errno == ESRCH) {
+                   /* pid no longer exists - remove the lock file */
+                   if (unlink(lock_file) == 0) {
+                       close(fd);
+                       syslog(LOG_NOTICE, "Removed stale lock on %s (pid %d)",
+                              dev, pid);
+                       continue;
+                   } else
+                       syslog(LOG_WARNING, "Couldn't remove stale lock on %s",
+                              dev);
+               } else
+                   syslog(LOG_NOTICE, "Device %s is locked by pid %d",
+                          dev, pid);
+           }
+           close(fd);
+       } else
+           syslog(LOG_ERR, "Can't create lock file %s: %m", lock_file);
+       free(lock_file);
+       lock_file = NULL;
+       return -1;
+    }
+
+    pid = getpid();
+    write(fd, &pid, sizeof pid);
+
+    close(fd);
+    return 0;
+}
+
+/*
+ * unlock - remove our lockfile
+ */
+void
+unlock()
+{
+    if (lock_file) {
+       unlink(lock_file);
+       free(lock_file);
+       lock_file = NULL;
+    }
+}
+
+#if defined(i386) && defined(HAS_BROKEN_IOCTL)
+int
+ioctl(fd, cmd, c)
+    int fd, cmd;
+    caddr_t c;
+{
+#undef ioctl
+    int ret;
+
+#ifdef DEBUGIOCTL
+    int serrno;
+    u_char let, code, size;
+
+    size = (cmd >> 16) & IOCPARM_MASK;
+    let = (cmd >> 8);
+    code = cmd;
+
+    if (let == 't' && (75 <= code && code <= 90))
+    syslog(LOG_INFO, "ioctl(%d, 0x%x ('%c', %d, %d), 0x%x)\n", fd, cmd,
+          let, code, size, c);
+#endif
+
+    ret = ioctl(fd, cmd, c);
+
+#ifdef DEBUGIOCTL
+    serrno = errno;
+    if (ret == -1)
+       syslog(LOG_INFO, "ioctl('%c', %d, %d) errno = %d (%m)\n",
+               let, code, size, errno);
+    if (let == 't' && (75 <= code && code <= 90) && (cmd & IOC_OUT)) {
+       int i, len = ((cmd >> 16) & IOCPARM_MASK);
+       for (i = 0; i < len / 4; ++i)
+               syslog(LOG_INFO, "word[%d] @ 0x%06x = 0x%x\n",
+                      i, &((int *) c)[i],((int *)c)[i]);
+    }
+    errno = serrno;
+#endif
+
+    if (ret == -1 && errno == EPERM)
+       errno = ret = 0;
+    return ret;
+}
+#endif /* HAS_BROKEN_IOCTL */
+
+
+#if defined(FIXSIGS) && (defined (hppa) || defined(sparc))
+
+/*
+ * These redefinitions of Posix functions are necessary
+ * because HPPA systems have an OS bug that causes 
+ * sigaction to core dump:
+ *
+ * AlainF 9-Nov-1994   HACK FOR HP-PA/NEXTSTEP
+ *                     sigaction(3) seems broken in the HP-PA NeXTSTEP 3.2
+ *                     Posix lib. This causes pppd to SIGBUS at the expiration
+ *                     of the first timeout (_sigtramp seems to invoke
+ *                     the SIGALRM handler at an unreasonably low address).
+ *                     All calls so sigaction(3) have been changed to calls
+ *                     to sigvec(2) and sigprocmask(SIG_BLOCK,...) to
+ *                     sigblock(2).
+ *                     This is kind of a hack, especially since there are
+ *                     other routines of the Posix lib still used, but
+ *                     it worked for me.
+ *
+ * Dave Hess <David-Hess@net.tamu.edu> noted that 3.3 Sparc seems to
+ * have the same bug.  Thus this fix has been enabled for SPARC also.
+ *
+ *
+ */
+
+int sigemptyset(sigset_t *mask)
+{
+  *mask = 0;
+}
+
+sigaddset(sigset_t *mask, int which_sig)
+{
+  *mask |= sigmask(which_sig);
+}
+
+
+int sigaction(int sig, const struct sigaction *act, struct sigaction *oact)
+{
+   struct sigvec sv;
+   static int in = 0;
+
+   sv.sv_handler = act->sa_handler;
+   sv.sv_mask = act->sa_mask;
+   sv.sv_flags = 0;
+
+   if (!in)
+     {
+       in = 1;
+       syslog(LOG_WARNING, "PPPD: Inside modified HP and SPARC sigaction\n");
+     }
+
+   return sigvec(sig, &sv, NULL);
+}
+
+#endif
diff --git a/pppstats/Makefile.NeXT b/pppstats/Makefile.NeXT
new file mode 100644 (file)
index 0000000..f56650f
--- /dev/null
@@ -0,0 +1,45 @@
+#
+# pppstats makefile
+# $Id: Makefile.NeXT,v 1.1 1995/08/10 06:48:39 paulus Exp $
+#
+
+ARCHFLAGS = -arch i386 -arch m68k
+BINDIR = /usr/local/ppp/bin
+MANDIR = /usr/local/ppp/man
+
+PPPSTATSRCS = pppstats.c
+PPPSTATOBJS = pppstats.o
+
+#CC = gcc
+
+COPTS = -O -posix $(ARCHFLAGS)
+COMPILE_FLAGS = 
+LIBS = 
+
+#
+# The VJC/PPP_COMPRESS flag is required to ensure correct sizing of
+# some of the structures
+#
+CFLAGS = -I.. $(COPTS) $(COMPILE_FLAGS) #-DVJC -DPPP_COMPRESS -DDECOMP_OUT
+
+all: pppstats
+
+install:
+       /bin/mkdirs $(BINDIR) $(MANDIR)/man8
+       install -c -s -m 555 -o root -g daemon pppstats $(BINDIR)/pppstats
+       install -c -m 444 -o root -g wheel pppstats.8 $(MANDIR)/man8
+
+
+pppstats: $(PPPSTATSRCS)
+       $(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
+
+clean:
+       rm -f pppstats *~ #* core
+
+depend:
+       cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
+#      makedepend $(CFLAGS) $(PPPSTATSRCS)
+
+saber_pppstats:
+       #setopt load_flags $(CFLAGS)
+       #load $(PPPSTATSRCS)