X-Git-Url: https://git.ozlabs.org/?p=ppp.git;a=blobdiff_plain;f=pppd%2Fpppd.8;h=1cf0f67db62b181f584903a52eafd8b3aafa45fe;hp=06e945fce998080090da52837d1d3b69306c19a7;hb=045169401601639b9163e1df00f868a0a49131ce;hpb=12fc6939987bc20feff22aadd82dff1a623d892b

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 06e945f..1cf0f67 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -127,6 +127,12 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+.TP
 .B disconnect \fIscript
 Execute the command specified by \fIscript\fR, by passing it to a
 shell, after
@@ -464,6 +470,11 @@ With this option, pppd will accept the peer's idea of our local IPv6
 interface identifier, even if the local IPv6 interface identifier
 was specified in an option.
 .TP
+.B ipv6cp\-accept\-remote
+With this option, pppd will accept the peer's idea of its (remote)
+IPv6 interface identifier, even if the remote IPv6 interface
+identifier was specified in an option.
+.TP
 .B ipv6cp\-max\-configure \fIn
 Set the maximum number of IPv6CP configure-request transmissions to
 \fIn\fR (default 10).
@@ -564,6 +575,11 @@ to 1) if the \fIproxyarp\fR option is used, and will enable the
 dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
 1) in demand mode if the local address changes.
 .TP
+.B lcp\-echo\-adaptive
+If this option is used with the \fIlcp\-echo\-failure\fR option then
+pppd will send LCP echo\-request frames only if no traffic was received
+from the peer since the last echo\-request was sent.
+.TP
 .B lcp\-echo\-failure \fIn
 If this option is given, pppd will presume the peer to be dead
 if \fIn\fR LCP echo\-requests are sent without receiving a valid LCP
@@ -743,6 +759,11 @@ Disable the \fIdefaultroute\fR option.  The system administrator who
 wishes to prevent users from creating default routes with pppd
 can do so by placing this option in the /etc/ppp/options file.
 .TP
+.B nodefaultroute6
+Disable the \fIdefaultroute6\fR option.  The system administrator who
+wishes to prevent users from adding a default route with pppd
+can do so by placing this option in the /etc/ppp/options file.
+.TP
 .B nodeflate
 Disables Deflate compression; pppd will not request or agree to
 compress packets using the Deflate scheme.
@@ -1071,6 +1092,10 @@ When operating as an EAP SRP\-SHA1 client, attempt to use the pseudonym
 stored in ~/.ppp_pseudonym first as the identity, and save in this
 file any pseudonym offered by the peer during authentication.
 .TP
+.B stop\-bits \fIn
+Set the number of stop bits for the serial port. Valid values are 1 or 2.
+The default value is 1.
+.TP
 .B sync
 Use synchronous HDLC serial encoding instead of asynchronous.
 The device used by pppd with this option must have sync support.
@@ -1100,6 +1125,15 @@ it has successfully established the ppp connection (to the point where
 the first network control protocol, usually the IP control protocol,
 has come up).
 .TP
+.B up_sdnotify
+Use this option to run pppd in systemd service units of Type=notify
+(\fBup_sdnotify\fR implies \fBnodetach\fR).
+When \fBup_sdnotify\fR is enabled, pppd will notify systemd once
+it has successfully established the ppp connection (to the point where
+the first network control protocl, usually the IP control protocol,
+has come up). This option is only availble when pppd is compiled with
+systemd support.
+.TP
 .B usehostname
 Enforce the use of the hostname (with domain name appended, if given)
 as the name of the local system for authentication purposes (overrides
@@ -1834,6 +1868,11 @@ Simpson, W.A.
 .I PPP in HDLC-like Framing.
 July 1994.
 .TP
+.B RFC1990
+Sklower, K.; et al.,
+.I The PPP Multilink Protocol (MP).
+August 1996.
+.TP
 .B RFC2284
 Blunk, L.; Vollbrecht, J.,
 .I PPP Extensible Authentication Protocol (EAP).