X-Git-Url: https://git.ozlabs.org/?p=ppp.git;a=blobdiff_plain;f=README;h=c339e896430f2492f430fb702a7247339e9b5616;hp=6f47b73e83299d6343c6403e2ffb644592570282;hb=9786230ddaa4428a4f2ad50be94bb288772a3d49;hpb=192a503e77660bc6788544a402f2c4048a97ccab diff --git a/README b/README index 6f47b73..c339e89 100644 --- a/README +++ b/README @@ -34,17 +34,21 @@ system, which contains more specific details for installing PPP on that system. The supported systems, and the corresponding README files, are: - Digital Unix (OSF/1) README.osf Linux README.linux + Solaris 2 README.sol2 + Digital Unix (OSF/1) README.osf NetBSD, FreeBSD README.bsd NeXTStep README.next - Solaris 2 README.sol2 SunOS 4.x README.sunos4 System V Release 4 README.svr4 Ultrix 4.x README.ultrix -(Unfortunately, AIX 4 is no longer supported, since I don't have a -maintainer for the AIX 4 port. If you want to volunteer, contact me.) +In fact, only the Linux and Solaris 2 ports have been tested in this +release. Code for the other systems is still included; if you use it, +let me know how it works. If I don't hear from anyone it will +probably get dropped in a subsequent release. AIX 4 is no longer +supported, since I don't have a maintainer for the AIX 4 port. If you +want to volunteer, contact me. In each case you start by running the ./configure script. This works out which operating system you are using and creates symbolic links to @@ -58,10 +62,180 @@ kernel using a `modload' facility. On others, the kernel image has to be recompiled and the system rebooted. See the README.* files for details. +N.B. Since 2.3.0, leaving the permitted IP addresses column of the +pap-secrets or chap-secrets file empty means that no addresses are +permitted. You need to put a "*" in that column to allow the peer to +use any IP address. (This only applies where the peer is +authenticating itself to you, of course.) -What's new in ppp-2.3.2. + +What's new in ppp-2.3.7. ************************ +* Pppd can now automatically allocate itself a pseudo-tty to use as + the serial device. This has made three new options possible: + + - `pty script' will run `script' with its standard input and output + connected to the master side of the pty. For example: + pppd pty 'ssh -t server.my.net pppd' + is a basic command for setting up a PPP link (tunnel) over ssh. + (In practice you may need to specify other options such as IP + addresses, etc.) + + - `notty' tells pppd to communicate over its standard input and + output, which do not have to be a terminal device. + + - `record filename' tells pppd to record all of the characters sent + and received over the serial device to a file called `filename'. + The data is recorded in a tagged format with timestamps, which can + be printed in a readable form with the pppdump program, which is + included in this distribution. + +* Pppd now logs the connect time and number of bytes sent and received + (at the level of the serial device) when the connection is + terminated. + +* If you use the updetach or nodetach option, pppd will print its + messages to standard output as well as logging them with syslog + (provided of course pppd isn't using its standard input or output as + its serial device). + +* There is a new `privgroup groupname' option (a privileged option). + If the user running pppd is in group `groupname', s/he can use + privileged options without restriction. + +* There is a new `receive-all' option, which causes pppd to accept all + control characters, even the ones that the peer should be escaping + (i.e. the receive asyncmap is 0). This is useful with some buggy + peers. + +* The default asyncmap is now 0. + +* There is a new `sync' option, currently only implemented under + Linux, which allows pppd to run on synchronous HDLC devices. + +* If a value for the device name or for the connect, disconnect, + welcome or pty option is given in a privileged option file + (i.e. /etc/ppp/options or a file loaded with the `call' option), it + cannot be overridden by a non-privileged user. + +* Many bugs have been fixed, notably: + - signals are not blocked unnecessarily, as they were in 2.3.6. + - the usepeerdns option should work now. + - the SPEED environment variable for scripts is set correctly. + - the /etc/ppp/auth-down script is not run until auth-up completes. + - the device is opened as root if it is the device on standard + input. + - pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux + if a hangup occurs at the wrong time. + +* Some error messages have been changed to be clearer (I hope :-) + + +What was new in ppp-2.3.6. +************************** + +* Pppd now opens the tty device as the user (rather than as root) if + the device name was given by the user, i.e. on the command line or + in the ~/.ppprc file. If the device name was given in + /etc/ppp/options or in a file loaded with the `call' option, the + device is opened as root. + +* The default behaviour of pppd is now to let a peer which has not + authenticated itself (e.g. your ISP) use any IP address to which the + system does not already have a route. (This is currently only + supported under Linux, Solaris and Digital Unix; on the other + systems, the peer must now authenticate itself unless the noauth + option is used.) + +* Added new option `usepeerdns', thanks to Nick Walker + . If the peer supplies DNS addresses, these + will be written to /etc/ppp/resolv.conf. The ip-up script can then + be used to add these addresses to /etc/resolv.conf if desired (see + the ip-up.local.add and ip-down.local.add files in the scripts + directory). + +* The Solaris ppp driver should now work correctly on SMP systems. + +* Minor corrections so that the code can compile under Solaris 7, + and under Linux with glibc-2.1. + +* The Linux kernel driver has been restructured for improved + performance. + +* Pppd now won't start the ip-down script until the ip-up script has + finished. + + +What was new in ppp-2.3.5. +************************** + +* Minor corrections to the Digital UNIX and NetBSD ports. + +* A workaround to avoid tickling a bug in the `se' serial port driver +on Sun PCI Ultra machines running Solaris. + +* Fixed a bug in the negotiation of the Microsoft WINS server address +option. + +* Fixed a bug in the Linux port where it would fail for kernel +versions above 2.1.99. + + +What was new in ppp-2.3.4. +************************** + +* The NeXT port has been updated, thanks to Steve Perkins. + +* ppp-2.3.4 compiles and works under Solaris 2.6, using either gcc or +cc. + +* With the Solaris, SVR4 and SunOS ports, you can control the choice +of C compiler, C compiler options, and installation directories by +editing the svr4/Makedefs or sunos4/Makedefs file. + +* Until now, we have been using the number 24 to identify Deflate +compression in the CCP negotiations, which was the number in the draft +RFC describing Deflate. The number actually assigned to Deflate is +26. The code has been changed to use 26, but to allow the use of 24 +for now for backwards compatibility. (This can be disabled with the +`nodeflatedraft' option to pppd.) + +* Fixed some bugs in the linux driver and deflate compressor which +were causing compression problems, including corrupting long +incompressible packets sometimes. + +* Fixes to the PAM and shadow password support in pppd, from Al +Longyear and others. + +* Pppd now sets some environment variables for scripts it invokes +(ip-up/down, auth-ip/down), giving information about the connection. +The variables it sets are PEERNAME, IPLOCAL, IPREMOTE, UID, DEVICE, +SPEED, and IFNAME. + +* Pppd now has an `updetach' option, which will cause it to detach +from its controlling terminal once the link has come up (i.e. once it +is available for IP traffic). + + +What was new in ppp-2.3.3. +************************** + +* Fixed compilation problems under SunOS. + +* Fixed a bug introduced into chat in 2.3.2, and compilation problems +introduced into the MS-CHAP implementation in 2.3.2. + +* The linux kernel driver has been updated for recent 2.1-series +kernel changes, and it now will ask kerneld to load compression +modules when required, if the kernel is configured to support kerneld. + +* Pppd should now compile correctly under linux on systems with glibc. + + +What was new in ppp-2.3.2. +************************** + * In 2.3.1, I made a change which was intended to make pppd able to detect loss of CD during or immediately after the connection script runs. Unfortunately, this had the side-effect that the connection @@ -71,8 +245,35 @@ reversed. * Fix compilation problems in the Linux kernel driver. -What's new in ppp-2.3. -********************** +What was new in ppp-2.3.1. +************************** + +* Enhancements to chat, thanks to Francis Demierre. Chat can now +accept comments in the chat script file, and has new SAY, HANGUP, +CLR_ABORT and CLR_REPORT keywords. + +* Fixed a bug which causes 2.3.0 to crash Solaris systems. + +* Bug-fixes and restructuring of the Linux kernel driver. + +* The holdoff behaviour of pppd has been changed slightly: now, if +the link comes up for IP (or other network protocol) traffic, we +consider that the link has been successfully established, and don't +enforce the holdoff period after the link goes down. + +* Pppd should now correctly wait for CD (carrier detect) from the +modem, even when the serial port initially had CLOCAL set, and it +should also detect loss of CD during or immediately after the +connection script runs. + +* Under linux, pppd will work with older 2.2.0* version kernel +drivers, although demand-dialling is not supported with them. + +* Minor bugfixes for pppd. + + +What was new in ppp-2.3. +************************ * Demand-dialling. Pppd now has a mode where it will establish the network interface immediately when it starts, but not actually bring @@ -154,13 +355,13 @@ questions like this that I get. If you find bugs in this package, please report them to the maintainer for the port for the operating system you are using: -Digital Unix (OSF/1) Farrell Woods -Linux Al Longyear -NetBSD Matthew Green +Solaris 2 Paul Mackerras +SunOS 4.x Paul Mackerras (for want of anybody better :-) +Digital Unix (OSF/1) Sowmini Varadhan +NetBSD Matthew Green FreeBSD Peter Wemm NeXTStep Steve Perkins -Solaris 2 Paul Mackerras -SunOS 4.x Paul Mackerras System V Release 4 Matthias Apitz Ultrix 4.x Paul Mackerras (for want of anybody better :-) @@ -179,4 +380,4 @@ The primary site for releases of this software is: ftp://cs.anu.edu.au/pub/software/ppp/ -($Id: README,v 1.10 1997/11/27 05:58:46 paulus Exp $) +($Id: README,v 1.16 1999/03/31 06:07:55 paulus Exp $)