]> git.ozlabs.org Git - ppp.git/blobdiff - pppd/pppd.8
pppd: Replace IF_NAMESIZE by IFNAMSIZ for struct ifreq
[ppp.git] / pppd / pppd.8
index f5597f6a6593db0ee00aeed7150ed725a0fc5e8e..cd4b9eba3a49ceb5bd87eaea702500b864f9552f 100644 (file)
@@ -55,8 +55,8 @@ non-privileged user.
 .I speed
 An option that is a decimal number is taken as the desired baud rate
 for the serial device.  On systems such as
-4.4BSD and NetBSD, any speed can be specified.  Other systems
-(e.g. Linux, SunOS) only support the commonly-used baud rates.
+Linux, 4.4BSD and NetBSD, any speed can be specified.  Other systems
+(e.g. SunOS) only support the commonly-used baud rates.
 .TP
 .B asyncmap \fImap
 This option sets the Async-Control-Character-Map (ACCM) for this end
@@ -127,12 +127,6 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
-.TP
 .B replacedefaultroute
 This option is a flag to the defaultroute option. If defaultroute is
 set and this flag is also set, pppd replaces an existing default route
@@ -354,6 +348,17 @@ Disable MRU [Maximum Receive Unit] negotiation.  With this option,
 pppd will use the default MRU value of 1500 bytes for both the
 transmit and receive direction.
 .TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR.  IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets.  This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP
 .B deflate \fInr,nt
 Request that the peer compress packets that it sends, using the
 Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
@@ -1765,6 +1770,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.