This entry is removed when the PPP connection is broken. This option
is privileged if the \fInodefaultroute6\fR option has been specified.
.TP
+.B replacedefaultroute
+This option is a flag to the defaultroute option. If defaultroute is
+set and this flag is also set, pppd replaces an existing default route
+with the new default route. This option is privileged.
+.TP
.B disconnect \fIscript
Execute the command specified by \fIscript\fR, by passing it to a
shell, after
compression in the corresponding direction. Use \fInobsdcomp\fR or
\fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
.TP
+.B ca \fIca-file
+(EAP-TLS) Use the file \fIca-file\fR as the X.509 Certificate Authority
+(CA) file (in PEM format), needed for setting up an EAP-TLS connection.
+This option is used on the client-side in conjunction with the \fBcert\fR
+and \fBkey\fR options.
+.TP
.B cdtrcts
Use a non-standard hardware flow control (i.e. DTR/CTS) to control
the flow of data on the serial port. If neither the \fIcrtscts\fR,
bi-directional flow control. The sacrifice is that this flow
control mode does not permit using DTR as a modem control line.
.TP
+.B cert \fIcertfile
+(EAP-TLS) Use the file \fIcertfile\fR as the X.509 certificate (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and
+\fBkey\fR options.
+.TP
.B chap\-interval \fIn
If this option is given, pppd will rechallenge the peer every \fIn\fR
seconds.
Set the CHAP restart interval (retransmission timeout for challenges)
to \fIn\fR seconds (default 3).
.TP
+.B chap-timeout \fIn
+Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
+.TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
.B child\-timeout \fIn
When exiting, wait for up to \fIn\fR seconds for any child processes
(such as the command specified with the \fBpty\fR command) to exit
1000 (1 second). This wait period only applies if the \fBconnect\fR
or \fBpty\fR option is used.
.TP
+.B crl \fIfilename
+(EAP-TLS) Use the file \fIfilename\fR as the Certificate Revocation List
+to check for the validity of the peer's certificate. This option is not
+mandatory for setting up an EAP-TLS connection. Also see the \fBcrl-dir\fR
+option.
+.TP
+.B crl-dir \fIdirectory
+(EAP-TLS) Use the directory \fIdirectory\fR to scan for CRL files in
+has format ($hash.r0) to check for the validity of the peer's certificate.
+This option is not mandatory for setting up an EAP-TLS connection.
+Also see the \fBcrl\fR option.
+.TP
.B debug
Enables connection debugging facilities.
If this option is given, pppd will log the contents of all
interface identifier, even if the local IPv6 interface identifier
was specified in an option.
.TP
+.B ipv6cp\-accept\-remote
+With this option, pppd will accept the peer's idea of its (remote)
+IPv6 interface identifier, even if the remote IPv6 interface
+identifier was specified in an option.
+.TP
.B ipv6cp\-max\-configure \fIn
Set the maximum number of IPv6CP configure-request transmissions to
\fIn\fR (default 10).
the kernel are logged by syslog(1) to a file as directed in the
/etc/syslog.conf configuration file.
.TP
+.B key \fIkeyfile
+(EAP-TLS) Use the file \fIkeyfile\fR as the private key file (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and
+\fBcert\fR options.
+.TP
.B ktune
Enables pppd to alter kernel settings as appropriate. Under Linux,
pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
Disable Address/Control compression in both directions (send and
receive).
.TP
+.B need-peer-eap
+(EAP-TLS) Require the peer to verify our authentication credentials.
+.TP
.B noauth
Do not require the peer to authenticate itself. This option is
privileged.
.TP
.B nodefaultroute
Disable the \fIdefaultroute\fR option. The system administrator who
-wishes to prevent users from creating default routes with pppd
+wishes to prevent users from adding a default route with pppd
can do so by placing this option in the /etc/ppp/options file.
.TP
+.B noreplacedefaultroute
+Disable the \fIreplacedefaultroute\fR option. This allows to disable a
+\fIreplacedefaultroute\fR option set previously in the configuration.
+.TP
.B nodefaultroute6
Disable the \fIdefaultroute6\fR option. The system administrator who
wishes to prevent users from adding a default route with pppd
stored in ~/.ppp_pseudonym first as the identity, and save in this
file any pseudonym offered by the peer during authentication.
.TP
+.B stop\-bits \fIn
+Set the number of stop bits for the serial port. Valid values are 1 or 2.
+The default value is 1.
+.TP
.B sync
Use synchronous HDLC serial encoding instead of asynchronous.
The device used by pppd with this option must have sync support.
the serial port.
.SH PPPOE OPTIONS
To establish PPP link over Ethernet (PPPoE) it is needed to load pppd's
-\fBplugin rp-pppoe.so\fR and then specify option \fBnic-\fIinterface\fR
+\fBplugin pppoe.so\fR and then specify option \fBnic-\fIinterface\fR
instead of modem options \fIttyname\fR and \fIspeed\fR.
Recognized pppd's PPPoE options are:
.TP
option may be avoided if interface name is unambiguous and does not
look like any other pppd's option.
.TP
-.B rp_pppoe_service \fIname
-Connect to specified PPPoE service name.
+.B pppoe-service \fIname
+Connect to specified PPPoE service name. For backward compatibility also
+\fBrp_pppoe_service\fP option name is supported.
.TP
-.B rp_pppoe_ac \fIname
-Connect to specified PPPoE access concentrator name.
+.B pppoe-ac \fIname
+Connect to specified PPPoE access concentrator name. For backward
+compatibility also \fBrp_pppoe_ac\fP option name is supported.
.TP
-.B rp_pppoe_sess \fIsessid\fP:\fImacaddr
-Attach to existing PPPoE session.
+.B pppoe-sess \fIsessid\fP:\fImacaddr
+Attach to existing PPPoE session. For backward compatibility also
+\fBrp_pppoe_sess\fP option name is supported.
.TP
-.B rp_pppoe_verbose \fIn
-Be verbose about discovered access concentrators.
+.B pppoe-verbose \fIn
+Be verbose about discovered access concentrators. When set to 2 or bigger
+value then dump also discovery packets. For backward compatibility also
+\fBrp_pppoe_verbose\fP option name is supported.
.TP
.B pppoe-mac \fImacaddr
Connect to specified MAC address.
.TP
-.B host-uniq \fIstring
+.B pppoe-host-uniq \fIstring
Set the PPPoE Host-Uniq tag to the supplied hex string.
By default PPPoE Host-Uniq tag is set to the pppd's process PID.
+For backward compatibility this option may be specified without
+\fBpppoe-\fP prefix.
.TP
.B pppoe-padi-timeout \fIn
Initial timeout for discovery packets in seconds (default 5).
.B LINKNAME
The logical name of the link, set with the \fIlinkname\fR option.
.TP
+.B CALL_FILE
+The value of the \fIcall\fR option.
+.TP
.B DNS1
If the peer supplies DNS server addresses, this variable is set to the
first DNS server address supplied (whether or not the usepeerdns
projects / ppp.git / blobdiff