value of -1, the route is only added if there is no default route at
all.
.TP
-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken. This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
-.TP
.B replacedefaultroute
This option is a flag to the defaultroute option. If defaultroute is
set and this flag is also set, pppd replaces an existing default route
.B chap-timeout \fIn
Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
.TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
.B child\-timeout \fIn
When exiting, wait for up to \fIn\fR seconds for any child processes
(such as the command specified with the \fBpty\fR command) to exit
pppd will use the default MRU value of 1500 bytes for both the
transmit and receive direction.
.TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken. This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR. IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets. This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP
.B deflate \fInr,nt
Request that the peer compress packets that it sends, using the
Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
Set the maximum number of IPCP terminate-request transmissions to
\fIn\fR (default 3).
.TP
+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP
.B ipcp\-restart \fIn
Set the IPCP restart interval (retransmission timeout) to \fIn\fR
seconds (default 3).
device routes, but the peer itself cannot be addressed directly for IP
traffic.
.TP
+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP
.B notty
Normally, pppd requires a terminal device. With this option, pppd
will allocate itself a pseudo-tty master/slave pair and use the slave
The IP address for the remote end of the link. This is only set when
IPCP has come up.
.TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link. This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link. This is only
+set when IPV6CP has come up.
+.TP
.B PEERNAME
The authenticated name of the peer. This is only set if the peer
authenticates itself.
projects / ppp.git / blobdiff