pppd: Fix setting flags of IPv6 peer address

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index bb7e2ff1d80732263c6ce2ca33c679ba0f064970..781f4dbf109e2dcf723027a7fb548afa57ea1f7c 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -303,6 +303,12 @@ to \fIn\fR seconds (default 3).
 .B chap-timeout \fIn
 Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
 .TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit
@@ -487,6 +493,18 @@ to send configure-Rejects instead to \fIn\fR (default 10).
 Set the maximum number of IPCP terminate-request transmissions to
 \fIn\fR (default 3).
 .TP
+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP
 .B ipcp\-restart \fIn
 Set the IPCP restart interval (retransmission timeout) to \fIn\fR
 seconds (default 3).
@@ -918,6 +936,9 @@ situation, the ppp interface can be used for routing by creating
 device routes, but the peer itself cannot be addressed directly for IP
 traffic.
 .TP
+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP
 .B notty
 Normally, pppd requires a terminal device.  With this option, pppd
 will allocate itself a pseudo-tty master/slave pair and use the slave
@@ -1744,6 +1765,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.