This entry is removed when the PPP connection is broken. This option
is privileged if the \fInodefaultroute6\fR option has been specified.
.TP
+.B replacedefaultroute
+This option is a flag to the defaultroute option. If defaultroute is
+set and this flag is also set, pppd replaces an existing default route
+with the new default route. This option is privileged.
+.TP
.B disconnect \fIscript
Execute the command specified by \fIscript\fR, by passing it to a
shell, after
.B chap-timeout \fIn
Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
.TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
.B child\-timeout \fIn
When exiting, wait for up to \fIn\fR seconds for any child processes
(such as the command specified with the \fBpty\fR command) to exit
Set the maximum number of IPCP terminate-request transmissions to
\fIn\fR (default 3).
.TP
+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP
.B ipcp\-restart \fIn
Set the IPCP restart interval (retransmission timeout) to \fIn\fR
seconds (default 3).
.TP
.B nodefaultroute
Disable the \fIdefaultroute\fR option. The system administrator who
-wishes to prevent users from creating default routes with pppd
+wishes to prevent users from adding a default route with pppd
can do so by placing this option in the /etc/ppp/options file.
.TP
+.B noreplacedefaultroute
+Disable the \fIreplacedefaultroute\fR option. This allows to disable a
+\fIreplacedefaultroute\fR option set previously in the configuration.
+.TP
.B nodefaultroute6
Disable the \fIdefaultroute6\fR option. The system administrator who
wishes to prevent users from adding a default route with pppd
device routes, but the peer itself cannot be addressed directly for IP
traffic.
.TP
+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP
.B notty
Normally, pppd requires a terminal device. With this option, pppd
will allocate itself a pseudo-tty master/slave pair and use the slave
the serial port.
.SH PPPOE OPTIONS
To establish PPP link over Ethernet (PPPoE) it is needed to load pppd's
-\fBplugin rp-pppoe.so\fR and then specify option \fBnic-\fIinterface\fR
+\fBplugin pppoe.so\fR and then specify option \fBnic-\fIinterface\fR
instead of modem options \fIttyname\fR and \fIspeed\fR.
Recognized pppd's PPPoE options are:
.TP
option may be avoided if interface name is unambiguous and does not
look like any other pppd's option.
.TP
-.B rp_pppoe_service \fIname
-Connect to specified PPPoE service name.
+.B pppoe-service \fIname
+Connect to specified PPPoE service name. For backward compatibility also
+\fBrp_pppoe_service\fP option name is supported.
.TP
-.B rp_pppoe_ac \fIname
-Connect to specified PPPoE access concentrator name.
+.B pppoe-ac \fIname
+Connect to specified PPPoE access concentrator name. For backward
+compatibility also \fBrp_pppoe_ac\fP option name is supported.
.TP
-.B rp_pppoe_sess \fIsessid\fP:\fImacaddr
-Attach to existing PPPoE session.
+.B pppoe-sess \fIsessid\fP:\fImacaddr
+Attach to existing PPPoE session. For backward compatibility also
+\fBrp_pppoe_sess\fP option name is supported.
.TP
-.B rp_pppoe_verbose \fIn
-Be verbose about discovered access concentrators.
+.B pppoe-verbose \fIn
+Be verbose about discovered access concentrators. For backward
+compatibility also \fBrp_pppoe_verbose\fP option name is supported.
.TP
.B pppoe-mac \fImacaddr
Connect to specified MAC address.
.TP
-.B host-uniq \fIstring
+.B pppoe-host-uniq \fIstring
Set the PPPoE Host-Uniq tag to the supplied hex string.
By default PPPoE Host-Uniq tag is set to the pppd's process PID.
+For backward compatibility this option may be specified without
+\fBpppoe-\fP prefix.
.TP
.B pppoe-padi-timeout \fIn
Initial timeout for discovery packets in seconds (default 5).
The IP address for the remote end of the link. This is only set when
IPCP has come up.
.TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link. This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link. This is only
+set when IPV6CP has come up.
+.TP
.B PEERNAME
The authenticated name of the peer. This is only set if the peer
authenticates itself.
.B LINKNAME
The logical name of the link, set with the \fIlinkname\fR option.
.TP
+.B CALL_FILE
+The value of the \fIcall\fR option.
+.TP
.B DNS1
If the peer supplies DNS server addresses, this variable is set to the
first DNS server address supplied (whether or not the usepeerdns
projects / ppp.git / blobdiff