pppd: Add documentation of stop-bits option to pppd man page (#154)

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 76a209766f2afc89b8e43187d87c05271f740ae5..2517446a7acc78d6f7d9f9c079643b219d57d674 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -127,6 +127,12 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+.TP
 .B disconnect \fIscript
 Execute the command specified by \fIscript\fR, by passing it to a
 shell, after
@@ -564,6 +570,11 @@ to 1) if the \fIproxyarp\fR option is used, and will enable the
 dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
 1) in demand mode if the local address changes.
 .TP
+.B lcp\-echo\-adaptive
+If this option is used with the \fIlcp\-echo\-failure\fR option then
+pppd will send LCP echo\-request frames only if no traffic was received
+from the peer since the last echo\-request was sent.
+.TP
 .B lcp\-echo\-failure \fIn
 If this option is given, pppd will presume the peer to be dead
 if \fIn\fR LCP echo\-requests are sent without receiving a valid LCP
@@ -743,6 +754,11 @@ Disable the \fIdefaultroute\fR option.  The system administrator who
 wishes to prevent users from creating default routes with pppd
 can do so by placing this option in the /etc/ppp/options file.
 .TP
+.B nodefaultroute6
+Disable the \fIdefaultroute6\fR option.  The system administrator who
+wishes to prevent users from adding a default route with pppd
+can do so by placing this option in the /etc/ppp/options file.
+.TP
 .B nodeflate
 Disables Deflate compression; pppd will not request or agree to
 compress packets using the Deflate scheme.
@@ -1071,6 +1087,10 @@ When operating as an EAP SRP\-SHA1 client, attempt to use the pseudonym
 stored in ~/.ppp_pseudonym first as the identity, and save in this
 file any pseudonym offered by the peer during authentication.
 .TP
+.B stop\-bits \fIn
+Set the number of stop bits for the serial port. Valid values are 1 or 2.
+The default value is 1.
+.TP
 .B sync
 Use synchronous HDLC serial encoding instead of asynchronous.
 The device used by pppd with this option must have sync support.
@@ -1843,6 +1863,11 @@ Simpson, W.A.
 .I PPP in HDLC-like Framing.
 July 1994.
 .TP
+.B RFC1990
+Sklower, K.; et al.,
+.I The PPP Multilink Protocol (MP).
+August 1996.
+.TP
 .B RFC2284
 Blunk, L.; Vollbrecht, J.,
 .I PPP Extensible Authentication Protocol (EAP).