--- /dev/null
+/*
+ * mppe.h - Definitions for MPPE
+ *
+ * Copyright (c) 2008 Paul Mackerras. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. The name(s) of the authors of this software must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission.
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by Paul Mackerras
+ * <paulus@samba.org>".
+ *
+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define MPPE_PAD 4 /* MPPE growth per frame */
+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */
+
+/* option bits for ccp_options.mppe */
+#define MPPE_OPT_40 0x01 /* 40 bit */
+#define MPPE_OPT_128 0x02 /* 128 bit */
+#define MPPE_OPT_STATEFUL 0x04 /* stateful mode */
+/* unsupported opts */
+#define MPPE_OPT_56 0x08 /* 56 bit */
+#define MPPE_OPT_MPPC 0x10 /* MPPC compression */
+#define MPPE_OPT_D 0x20 /* Unknown */
+#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
+#define MPPE_OPT_UNKNOWN 0x40 /* Bits !defined in RFC 3078 were set */
+
+/*
+ * This is not nice ... the alternative is a bitfield struct though.
+ * And unfortunately, we cannot share the same bits for the option
+ * names above since C and H are the same bit. We could do a u_int32
+ * but then we have to do a htonl() all the time and/or we still need
+ * to know which octet is which.
+ */
+#define MPPE_C_BIT 0x01 /* MPPC */
+#define MPPE_D_BIT 0x10 /* Obsolete, usage unknown */
+#define MPPE_L_BIT 0x20 /* 40-bit */
+#define MPPE_S_BIT 0x40 /* 128-bit */
+#define MPPE_M_BIT 0x80 /* 56-bit, not supported */
+#define MPPE_H_BIT 0x01 /* Stateless (in a different byte) */
+
+/* Does not include H bit; used for least significant octet only. */
+#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
+
+/* Build a CI from mppe opts (see RFC 3078) */
+#define MPPE_OPTS_TO_CI(opts, ci) \
+ do { \
+ u_char *ptr = ci; /* u_char[4] */ \
+ \
+ /* H bit */ \
+ if (opts & MPPE_OPT_STATEFUL) \
+ *ptr++ = 0x0; \
+ else \
+ *ptr++ = MPPE_H_BIT; \
+ *ptr++ = 0; \
+ *ptr++ = 0; \
+ \
+ /* S,L bits */ \
+ *ptr = 0; \
+ if (opts & MPPE_OPT_128) \
+ *ptr |= MPPE_S_BIT; \
+ if (opts & MPPE_OPT_40) \
+ *ptr |= MPPE_L_BIT; \
+ /* M,D,C bits not supported */ \
+ } while (/* CONSTCOND */ 0)
+
+/* The reverse of the above */
+#define MPPE_CI_TO_OPTS(ci, opts) \
+ do { \
+ u_char *ptr = ci; /* u_char[4] */ \
+ \
+ opts = 0; \
+ \
+ /* H bit */ \
+ if (!(ptr[0] & MPPE_H_BIT)) \
+ opts |= MPPE_OPT_STATEFUL; \
+ \
+ /* S,L bits */ \
+ if (ptr[3] & MPPE_S_BIT) \
+ opts |= MPPE_OPT_128; \
+ if (ptr[3] & MPPE_L_BIT) \
+ opts |= MPPE_OPT_40; \
+ \
+ /* M,D,C bits */ \
+ if (ptr[3] & MPPE_M_BIT) \
+ opts |= MPPE_OPT_56; \
+ if (ptr[3] & MPPE_D_BIT) \
+ opts |= MPPE_OPT_D; \
+ if (ptr[3] & MPPE_C_BIT) \
+ opts |= MPPE_OPT_MPPC; \
+ \
+ /* Other bits */ \
+ if (ptr[0] & ~MPPE_H_BIT) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ if (ptr[1] || ptr[2]) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ if (ptr[3] & ~MPPE_ALL_BITS) \
+ opts |= MPPE_OPT_UNKNOWN; \
+ } while (/* CONSTCOND */ 0)