use common version

[ppp.git] / README.osf

diff --git a/README.osf b/README.osf
index e2afc7a4617e65135cec2d4f25f8f52e26ec4236..ab6919c32919bac1b55ef142b99d9bd5f06d751e 100644 (file)
--- a/README.osf
+++ b/README.osf
@@ -1,8 +1,8 @@
-
-This file (README.osf) contains instructions for installing ppp-2.2 on a
-DEC Alpha running OSF/1 version 2.0 or 3.0.  The original STREAMS
-module code is by (and copyrighted by) Brad Clements.  See the source 
-files and the general README file for full credits and copyright notices.
+This file (README.osf) contains instructions for installing ppp-2.3 on a
+Digital Alpha-based system running Digital UNIX (aka DEC OSF/1)
+version 2.0 through version 3.2F.  Digial UNIX version 3.2G and beyond
+are not supported by this package, since PPP is an integral component
+of those releases.

 
 If you would like to be on a mailing list concerning the ppp package,
 send mail to srt@cs.unt.edu and let me know.  This mailing list should
 
 If you would like to be on a mailing list concerning the ppp package,
 send mail to srt@cs.unt.edu and let me know.  This mailing list should


@@ -16,9 +16,7 @@ version 2.1.2 with a hardware serial port, then you probably used the
 You don't need this any more, and will have a more efficient connection
 if you get rid of this old work-around.
 
 You don't need this any more, and will have a more efficient connection
 if you get rid of this old work-around.
 

-Below are the steps for installing PPP on a Digital Equipment Corp.
-Alpha system running Digital UNIX (formerly known as DEC OSF/1.)
-
+Below are the steps for installing PPP on a DEC AXP system running OSF/1.

 You must do all of the following as "root".
 
 1.  Make the kernel sources, daemon, chat, and pppstat program by typing 
 You must do all of the following as "root".
 
 1.  Make the kernel sources, daemon, chat, and pppstat program by typing 


@@ -34,17 +32,19 @@ You must do all of the following as "root".
 2.  This step differs depending on whether you are running OSF/1 V3.0
     or later.
 
 2.  This step differs depending on whether you are running OSF/1 V3.0
     or later.
 

-    FOR DEC OSF/1 VERSIONS PRIOR TO V3.0:
+    FOR DEC OSF/1 V2.0 THROUGH V2.1:

 
     | Add the following lines to the file /sys/conf/files:
     |
 
     | Add the following lines to the file /sys/conf/files:
     |

-    |      streamsm/ppp_if.c                    optional ppp Notbinary
-    |      streamsm/ppp_async.c                 optional ppp Notbinary
-    |      streamsm/ppp_init.c                  optional ppp Notbinary
-    |      streamsm/vjcompress.c                optional ppp Notbinary
-    |      streamsm/bsd-comp.c                  optional ppp Notbinary
-    |      streamsm/ppp_comp.c                  optional ppp Notbinary
-    |
+    | streamsm/if_ppp.c                optional ppp Notbinary optimize -g3
+    | streamsm/ppp_comp.c      optional ppp Notbinary optimize -g3
+    | streamsm/ppp_init.c      optional ppp Notbinary optimize -g3
+    | streamsm/vjcompress.c    optional ppp Notbinary optimize -g3
+    | streamsm/bsd-comp.c      optional ppp Notbinary optimize -g3
+    | streamsm/deflate.c       optional ppp Notbinary optimize -g3
+    | streamsm/ppp.c           optional ppp Notbinary optimize -g3
+    | streamsm/ppp_ahdlc.c     optional ppp Notbinary optimize -g3
+    | streamsm/zlib.c          optional ppp Notbinary optimize -g3

     |
     | Edit the file /sys/streams/str_config.c --- at the end there will be a
     | comment to the effect of "add new configurations above this comment".
     |
     | Edit the file /sys/streams/str_config.c --- at the end there will be a
     | comment to the effect of "add new configurations above this comment".


@@ -56,16 +56,25 @@ You must do all of the following as "root".
     |      retval = ppp_configure(SYSCONFIG_CONFIGURE,
     |                             &sb, sc_size, &sc, sc_size);
 
     |      retval = ppp_configure(SYSCONFIG_CONFIGURE,
     |                             &sb, sc_size, &sc, sc_size);
 

-    FOR DEC OSF/1 VERSIONS V3.0 AND LATER, INCLUDING DIGITAL UNIX:
+    FOR DEC OSF/1 V3.0 THROUGH Digital UNIX V3.2F:

 
     | Add the following lines to the file /sys/conf/files:
     |
 
     | Add the following lines to the file /sys/conf/files:
     |

-    |      streamsm/ppp_if.c          optional ppp if_dynamic ppp Notbinary
-    |      streamsm/ppp_async.c       optional ppp if_dynamic ppp Notbinary
-    |      streamsm/ppp_init.c        optional ppp if_dynamic ppp Notbinary
-    |      streamsm/vjcompress.c      optional ppp if_dynamic ppp Notbinary
-    |      streamsm/bsd-comp.c        optional ppp if_dynamic ppp Notbinary
-    |      streamsm/ppp_comp.c        optional ppp if_dynamic ppp Notbinary
+    | streamsm/if_ppp.c                optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/ppp_comp.c      optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/ppp_init.c      optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/vjcompress.c    optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/bsd-comp.c      optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/deflate.c       optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/ppp.c           optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/ppp_ahdlc.c     optional ppp if_dynamic ppp Notbinary optimize -g3
+    | streamsm/zlib.c          optional ppp if_dynamic ppp Notbinary optimize -g3
+
+    FOR Digital UNIX V3.2G AND V4.0 AND BEYOND
+
+    This package does not support these versions of Digital UNIX.
+    PPP is an integral part of the OS.  Please see the Guide to
+    Network Administration for details on configuring PPP.

 
 4.  Find your system's configuration file.  This should be called
     /sys/conf/SYSNAME, where SYSNAME is replaced by the name of your
 
 4.  Find your system's configuration file.  This should be called
     /sys/conf/SYSNAME, where SYSNAME is replaced by the name of your


@@ -73,7 +82,7 @@ You must do all of the following as "root".
     /sys/conf/ZAPHOD.  I will refer to this file from now on as 
     /sys/conf/SYSNAME.
 
     /sys/conf/ZAPHOD.  I will refer to this file from now on as 
     /sys/conf/SYSNAME.
 

-5.  Add the following line among the other options in /sys/conf/SYSNAME:
+5.  Add the following line at the end of /sys/conf/SYSNAME:

 
        options         PPP
 
 
        options         PPP