updated

[ppp.git] / README.bsd

diff --git a/README.bsd b/README.bsd
index 1d8988fe8553e3a17a0646368ad5c90ab6a93116..a45abb34ee14b7b887c2e8f8159d100d0a537495 100644 (file)
--- a/README.bsd
+++ b/README.bsd
@@ -1,15 +1,9 @@
-Installation instructions for installing ppp-2.2 on FreeBSD and
+Installation instructions for installing ppp-2.2.1 on FreeBSD and

 NetBSD systems.
 
 NetBSD systems.
 

-This package supports NetBSD-1.0 and FreeBSD-2.0.  It should work
-on later systems (it works on NetBSD-current as of this writing).
-Modloading is not yet supported.
-
-I have code which should work on earlier systems (386BSD, NetBSD-0.9,
-FreeBSD-1.1.5.1, etc.), but it is not included in this package because
-I have no way to test or support it.  If you are committed to one of
-these earlier versions and you are willing to try out some code
-without needing major hand-holding, contact me (paulus@cs.anu.edu.au).
+This package supports NetBSD-1.1, NetBSD-1.0, FreeBSD-2.0, and
+FreeBSD-1.1.5.1.  It should work on later systems.  Modloading is not
+yet supported.

 
 To install PPP, you need to rebuild your kernel to include the latest
 version of the PPP driver, as well as compiling and installing the
 
 To install PPP, you need to rebuild your kernel to include the latest
 version of the PPP driver, as well as compiling and installing the


@@ -19,14 +13,14 @@ reboot with the new kernel (you'll have to reboot with the new kernel
 before you can run them, of course).
 
 The following commands should compile and install the user-level
 before you can run them, of course).
 
 The following commands should compile and install the user-level

-applications (in the ppp-2.2 directory):
+applications (in the ppp-2.2.1 directory):

 
        ./configure
        make
        make install            (you need to be root for this)
 
 The process of updating the kernel source files is now largely
 
        ./configure
        make
        make install            (you need to be root for this)
 
 The process of updating the kernel source files is now largely

-automated.  In the ppp-2.2 directory, issue the command:
+automated.  In the ppp-2.2.1 directory, issue the command:

 
        make kernel
 
 
        make kernel
 


@@ -35,56 +29,73 @@ of several files into /sys, patch other files, and finally give you
 instructions about modifying your kernel configuration file (if
 necessary), rebuilding the kernel and rebooting.
 
 instructions about modifying your kernel configuration file (if
 necessary), rebuilding the kernel and rebooting.
 

-If you want to do the process by hand, read on...
+If you want to do the process by hand, read the next section.

 
 
 Updating the kernel ppp code.
 
 
 Updating the kernel ppp code.

------------------------------
+*****************************

 
 You need to update several files in the /sys/net directory, and patch
 
 You need to update several files in the /sys/net directory, and patch

-some other files under /sys.
+some other files under /sys.  The details depend on which operating
+system you're running.
+
+NetBSD-1.1.
+===========
+
+Copy the following files to /sys/net:
+
+       net/ppp-comp.h
+       netbsd-1.1/if_ppp.c
+       netbsd-1.1/ppp_tty.c
+

 
 

-For NetBSD-1.0, copy the following files to /sys/net:
+NetBSD-1.0.
+===========
+
+Copy the following files to /sys/net:

 
        net/if_ppp.h
        net/ppp-comp.h
        net/ppp_defs.h
 
        net/if_ppp.h
        net/ppp-comp.h
        net/ppp_defs.h

-       netbsd/bsd-comp.c
-       netbsd/if_ppp.c
-       netbsd/if_pppvar.h
-       netbsd/netisr.h
-       netbsd/ppp_tty.c
-       netbsd/slcompress.c
-       netbsd/slcompress.h
+       netbsd-1.0/bsd-comp.c
+       netbsd-1.0/if_ppp.c
+       netbsd-1.0/if_pppvar.h
+       netbsd-1.0/netisr.h
+       netbsd-1.0/ppp_tty.c
+       netbsd-1.0/slcompress.c
+       netbsd-1.0/slcompress.h

 
 You then need to patch /sys/conf/files and /sys/conf/files.newconf
 using the commands:
 
 
 You then need to patch /sys/conf/files and /sys/conf/files.newconf
 using the commands:
 

-       patch -p -N -d /sys/conf <netbsd/files.patch
-       patch -p -N -d /sys/conf <netbsd/files.newconf.patch
+       patch -p -N -d /sys/conf <netbsd-1.0/files.patch
+       patch -p -N -d /sys/conf <netbsd-1.0/files.newconf.patch

 
 The next step is to patch the file containing the code which
 dispatches software interrupts.  Unfortunately, this code is in the
 architecture-dependent files, so the file to patch depends on which
 NetBSD port you are using:
 
 
 The next step is to patch the file containing the code which
 dispatches software interrupts.  Unfortunately, this code is in the
 architecture-dependent files, so the file to patch depends on which
 NetBSD port you are using:
 

-Port   File to patch                      Patch file
-----   -------------                      ----------
-amiga  /sys/arch/amiga/amiga/machdep.c    netbsd/arch/amiga/machdep.c.patch
-hp300  /sys/arch/hp300/hp300/machdep.c    netbsd/arch/hp300/machdep.c.patch
-i386   /sys/arch/i386/isa/icu.s           netbsd/arch/i386/icu.s.patch
-mac68k /sys/arch/mac68k/mac68k/machdep.c  netbsd/arch/mac68k/machdep.c.patch
-pc532  /sys/arch/pc532/pc532/locore.s     netbsd/arch/pc532/locore.s.patch
-pmax   /sys/arch/pmax/pmax/trap.c         netbsd/arch/pmax/trap.c.patch
-sparc  /sys/arch/sparc/sparc/intr.c       netbsd/arch/sparc/intr.c.patch
-sun3   /sys/arch/sun3/sun3/isr.c          netbsd/arch/sun3/isr.c.patch
+Port   File to patch                      Patch file is netbsd-1.0/arch/
+----   -------------                      ------------------------------
+amiga  /sys/arch/amiga/amiga/machdep.c    amiga/machdep.c.patch
+hp300  /sys/arch/hp300/hp300/machdep.c    hp300/machdep.c.patch
+i386   /sys/arch/i386/isa/icu.s           i386/icu.s.patch
+mac68k /sys/arch/mac68k/mac68k/machdep.c  mac68k/machdep.c.patch
+pc532  /sys/arch/pc532/pc532/locore.s     pc532/locore.s.patch
+pmax   /sys/arch/pmax/pmax/trap.c         pmax/trap.c.patch
+sparc  /sys/arch/sparc/sparc/intr.c       sparc/intr.c.patch
+sun3   /sys/arch/sun3/sun3/isr.c          sun3/isr.c.patch

 
 To do the patch, you would use a command something like this:
 
 
 To do the patch, you would use a command something like this:
 

-       patch -p -d /sys/arch/i386/isa <netbsd/arch/i386/icu.s.patch
+       patch -p -d /sys/arch/i386/isa <netbsd-1.0/arch/i386/icu.s.patch
+

 
 

+FreeBSD-2.0.
+============

 
 

-For FreeBSD-2.0, copy the following files to /sys/net:
+Copy the following files to /sys/net:

 
        net/if_ppp.h
        net/ppp-comp.h
 
        net/if_ppp.h
        net/ppp-comp.h


@@ -101,8 +112,37 @@ You then need to patch /sys/conf/files using the command:
        patch -p -N -d /sys/conf <freebsd-2.0/files.patch
 
 
        patch -p -N -d /sys/conf <freebsd-2.0/files.patch
 
 

+FreeBSD-1.1.5.1.
+================
+
+Copy the following files to /sys/net:
+
+       net/if_ppp.h
+       net/ppp-comp.h
+       net/ppp_defs.h
+       freebsd-old/bsd-comp.c
+       freebsd-old/if_ppp.c
+       freebsd-old/if_pppvar.h
+       freebsd-old/ppp_tty.c
+       freebsd-old/slcompress.c
+       freebsd-old/slcompress.h
+
+You then need to patch /sys/conf/files using the command:
+
+       patch -p -N -d /sys/conf <freebsd-old/files.patch
+
+Then patch /sys/net/netisr.h with the command:
+
+       patch -p -N -d /sys/net <freebsd-old/netisr.h.patch
+
+The next step is to patch the file containing the code which
+dispatches software interrupts with the following command:
+
+       patch -p -N -d /sys/i386/isa <freebsd-old/icu.s.patch
+
+

 Configuring and making the new kernel.
 Configuring and making the new kernel.

---------------------------------------
+**************************************

 
 First, make sure that the configuration file you are using includes a
 line something like
 
 First, make sure that the configuration file you are using includes a
 line something like