]> git.ozlabs.org Git - ppp.git/blob - pppd/auth.c
Support renaming interfaces from a pre-up script.
[ppp.git] / pppd / auth.c
1 /*
2  * auth.c - PPP authentication and phase control.
3  *
4  * Copyright (c) 1993-2002 Paul Mackerras. All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  *
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  *
13  * 2. The name(s) of the authors of this software must not be used to
14  *    endorse or promote products derived from this software without
15  *    prior written permission.
16  *
17  * 3. Redistributions of any form whatsoever must retain the following
18  *    acknowledgment:
19  *    "This product includes software developed by Paul Mackerras
20  *     <paulus@samba.org>".
21  *
22  * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
23  * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
24  * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
25  * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
26  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
27  * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
28  * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
29  *
30  * Derived from main.c, which is:
31  *
32  * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved.
33  *
34  * Redistribution and use in source and binary forms, with or without
35  * modification, are permitted provided that the following conditions
36  * are met:
37  *
38  * 1. Redistributions of source code must retain the above copyright
39  *    notice, this list of conditions and the following disclaimer.
40  *
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in
43  *    the documentation and/or other materials provided with the
44  *    distribution.
45  *
46  * 3. The name "Carnegie Mellon University" must not be used to
47  *    endorse or promote products derived from this software without
48  *    prior written permission. For permission or any legal
49  *    details, please contact
50  *      Office of Technology Transfer
51  *      Carnegie Mellon University
52  *      5000 Forbes Avenue
53  *      Pittsburgh, PA  15213-3890
54  *      (412) 268-4387, fax: (412) 268-7395
55  *      tech-transfer@andrew.cmu.edu
56  *
57  * 4. Redistributions of any form whatsoever must retain the following
58  *    acknowledgment:
59  *    "This product includes software developed by Computing Services
60  *     at Carnegie Mellon University (http://www.cmu.edu/computing/)."
61  *
62  * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
63  * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
64  * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
65  * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
66  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
67  * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
68  * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
69  */
70
71 #define RCSID   "$Id: auth.c,v 1.117 2008/07/01 12:27:56 paulus Exp $"
72
73 #include <stdio.h>
74 #include <stddef.h>
75 #include <stdlib.h>
76 #include <unistd.h>
77 #include <errno.h>
78 #include <pwd.h>
79 #include <grp.h>
80 #include <string.h>
81 #include <sys/types.h>
82 #include <sys/stat.h>
83 #include <sys/socket.h>
84 #include <utmp.h>
85 #include <fcntl.h>
86 #if defined(_PATH_LASTLOG) && defined(__linux__)
87 #include <lastlog.h>
88 #endif
89
90 #include <netdb.h>
91 #include <netinet/in.h>
92 #include <arpa/inet.h>
93
94
95 #ifdef HAS_SHADOW
96 #include <shadow.h>
97 #ifndef PW_PPP
98 #define PW_PPP PW_LOGIN
99 #endif
100 #endif
101 #include <time.h>
102
103 #include "pppd.h"
104 #include "fsm.h"
105 #include "lcp.h"
106 #include "ccp.h"
107 #include "ecp.h"
108 #include "ipcp.h"
109 #include "upap.h"
110 #include "chap-new.h"
111 #include "eap.h"
112 #ifdef CBCP_SUPPORT
113 #include "cbcp.h"
114 #endif
115 #include "pathnames.h"
116 #include "session.h"
117
118 static const char rcsid[] = RCSID;
119
120 /* Bits in scan_authfile return value */
121 #define NONWILD_SERVER  1
122 #define NONWILD_CLIENT  2
123
124 #define ISWILD(word)    (word[0] == '*' && word[1] == 0)
125
126 /* The name by which the peer authenticated itself to us. */
127 char peer_authname[MAXNAMELEN];
128
129 /* Records which authentication operations haven't completed yet. */
130 static int auth_pending[NUM_PPP];
131
132 /* Records which authentication operations have been completed. */
133 int auth_done[NUM_PPP];
134
135 /* List of addresses which the peer may use. */
136 static struct permitted_ip *addresses[NUM_PPP];
137
138 /* Wordlist giving addresses which the peer may use
139    without authenticating itself. */
140 static struct wordlist *noauth_addrs;
141
142 /* Remote telephone number, if available */
143 char remote_number[MAXNAMELEN];
144
145 /* Wordlist giving remote telephone numbers which may connect. */
146 static struct wordlist *permitted_numbers;
147
148 /* Extra options to apply, from the secrets file entry for the peer. */
149 static struct wordlist *extra_options;
150
151 /* Number of network protocols which we have opened. */
152 static int num_np_open;
153
154 /* Number of network protocols which have come up. */
155 static int num_np_up;
156
157 /* Set if we got the contents of passwd[] from the pap-secrets file. */
158 static int passwd_from_file;
159
160 /* Set if we require authentication only because we have a default route. */
161 static bool default_auth;
162
163 /* Hook to enable a plugin to control the idle time limit */
164 int (*idle_time_hook) __P((struct ppp_idle *)) = NULL;
165
166 /* Hook for a plugin to say whether we can possibly authenticate any peer */
167 int (*pap_check_hook) __P((void)) = NULL;
168
169 /* Hook for a plugin to check the PAP user and password */
170 int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
171                           struct wordlist **paddrs,
172                           struct wordlist **popts)) = NULL;
173
174 /* Hook for a plugin to know about the PAP user logout */
175 void (*pap_logout_hook) __P((void)) = NULL;
176
177 /* Hook for a plugin to get the PAP password for authenticating us */
178 int (*pap_passwd_hook) __P((char *user, char *passwd)) = NULL;
179
180 /* Hook for a plugin to say if we can possibly authenticate a peer using CHAP */
181 int (*chap_check_hook) __P((void)) = NULL;
182
183 /* Hook for a plugin to get the CHAP password for authenticating us */
184 int (*chap_passwd_hook) __P((char *user, char *passwd)) = NULL;
185
186 /* Hook for a plugin to say whether it is OK if the peer
187    refuses to authenticate. */
188 int (*null_auth_hook) __P((struct wordlist **paddrs,
189                            struct wordlist **popts)) = NULL;
190
191 int (*allowed_address_hook) __P((u_int32_t addr)) = NULL;
192
193 #ifdef HAVE_MULTILINK
194 /* Hook for plugin to hear when an interface joins a multilink bundle */
195 void (*multilink_join_hook) __P((void)) = NULL;
196 #endif
197
198 /* A notifier for when the peer has authenticated itself,
199    and we are proceeding to the network phase. */
200 struct notifier *auth_up_notifier = NULL;
201
202 /* A notifier for when the link goes down. */
203 struct notifier *link_down_notifier = NULL;
204
205 /*
206  * This is used to ensure that we don't start an auth-up/down
207  * script while one is already running.
208  */
209 enum script_state {
210     s_down,
211     s_up
212 };
213
214 static enum script_state auth_state = s_down;
215 static enum script_state auth_script_state = s_down;
216 static pid_t auth_script_pid = 0;
217
218 /*
219  * Option variables.
220  */
221 bool uselogin = 0;              /* Use /etc/passwd for checking PAP */
222 bool session_mgmt = 0;          /* Do session management (login records) */
223 bool cryptpap = 0;              /* Passwords in pap-secrets are encrypted */
224 bool refuse_pap = 0;            /* Don't wanna auth. ourselves with PAP */
225 bool refuse_chap = 0;           /* Don't wanna auth. ourselves with CHAP */
226 bool refuse_eap = 0;            /* Don't wanna auth. ourselves with EAP */
227 #ifdef CHAPMS
228 bool refuse_mschap = 0;         /* Don't wanna auth. ourselves with MS-CHAP */
229 bool refuse_mschap_v2 = 0;      /* Don't wanna auth. ourselves with MS-CHAPv2 */
230 #else
231 bool refuse_mschap = 1;         /* Don't wanna auth. ourselves with MS-CHAP */
232 bool refuse_mschap_v2 = 1;      /* Don't wanna auth. ourselves with MS-CHAPv2 */
233 #endif
234 bool usehostname = 0;           /* Use hostname for our_name */
235 bool auth_required = 0;         /* Always require authentication from peer */
236 bool allow_any_ip = 0;          /* Allow peer to use any IP address */
237 bool explicit_remote = 0;       /* User specified explicit remote name */
238 bool explicit_user = 0;         /* Set if "user" option supplied */
239 bool explicit_passwd = 0;       /* Set if "password" option supplied */
240 char remote_name[MAXNAMELEN];   /* Peer's name for authentication */
241
242 static char *uafname;           /* name of most recent +ua file */
243
244 extern char *crypt __P((const char *, const char *));
245
246 /* Prototypes for procedures local to this file. */
247
248 static void network_phase __P((int));
249 static void check_idle __P((void *));
250 static void connect_time_expired __P((void *));
251 static int  null_login __P((int));
252 static int  get_pap_passwd __P((char *));
253 static int  have_pap_secret __P((int *));
254 static int  have_chap_secret __P((char *, char *, int, int *));
255 static int  have_srp_secret __P((char *client, char *server, int need_ip,
256     int *lacks_ipp));
257 static int  ip_addr_check __P((u_int32_t, struct permitted_ip *));
258 static int  scan_authfile __P((FILE *, char *, char *, char *,
259                                struct wordlist **, struct wordlist **,
260                                char *, int));
261 static void free_wordlist __P((struct wordlist *));
262 static void auth_script __P((char *));
263 static void auth_script_done __P((void *));
264 static void set_allowed_addrs __P((int, struct wordlist *, struct wordlist *));
265 static int  some_ip_ok __P((struct wordlist *));
266 static int  setupapfile __P((char **));
267 static int  privgroup __P((char **));
268 static int  set_noauth_addr __P((char **));
269 static int  set_permitted_number __P((char **));
270 static void check_access __P((FILE *, char *));
271 static int  wordlist_count __P((struct wordlist *));
272
273 #ifdef MAXOCTETS
274 static void check_maxoctets __P((void *));
275 #endif
276
277 /*
278  * Authentication-related options.
279  */
280 option_t auth_options[] = {
281     { "auth", o_bool, &auth_required,
282       "Require authentication from peer", OPT_PRIO | 1 },
283     { "noauth", o_bool, &auth_required,
284       "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV,
285       &allow_any_ip },
286     { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap,
287       "Require PAP authentication from peer",
288       OPT_PRIOSUB | 1, &auth_required },
289     { "+pap", o_bool, &lcp_wantoptions[0].neg_upap,
290       "Require PAP authentication from peer",
291       OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
292     { "require-chap", o_bool, &auth_required,
293       "Require CHAP authentication from peer",
294       OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5,
295       &lcp_wantoptions[0].chap_mdtype },
296     { "+chap", o_bool, &auth_required,
297       "Require CHAP authentication from peer",
298       OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5,
299       &lcp_wantoptions[0].chap_mdtype },
300 #ifdef CHAPMS
301     { "require-mschap", o_bool, &auth_required,
302       "Require MS-CHAP authentication from peer",
303       OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT,
304       &lcp_wantoptions[0].chap_mdtype },
305     { "+mschap", o_bool, &auth_required,
306       "Require MS-CHAP authentication from peer",
307       OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT,
308       &lcp_wantoptions[0].chap_mdtype },
309     { "require-mschap-v2", o_bool, &auth_required,
310       "Require MS-CHAPv2 authentication from peer",
311       OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2,
312       &lcp_wantoptions[0].chap_mdtype },
313     { "+mschap-v2", o_bool, &auth_required,
314       "Require MS-CHAPv2 authentication from peer",
315       OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2,
316       &lcp_wantoptions[0].chap_mdtype },
317 #endif
318
319     { "refuse-pap", o_bool, &refuse_pap,
320       "Don't agree to auth to peer with PAP", 1 },
321     { "-pap", o_bool, &refuse_pap,
322       "Don't allow PAP authentication with peer", OPT_ALIAS | 1 },
323     { "refuse-chap", o_bool, &refuse_chap,
324       "Don't agree to auth to peer with CHAP",
325       OPT_A2CLRB | MDTYPE_MD5,
326       &lcp_allowoptions[0].chap_mdtype },
327     { "-chap", o_bool, &refuse_chap,
328       "Don't allow CHAP authentication with peer",
329       OPT_ALIAS | OPT_A2CLRB | MDTYPE_MD5,
330       &lcp_allowoptions[0].chap_mdtype },
331 #ifdef CHAPMS
332     { "refuse-mschap", o_bool, &refuse_mschap,
333       "Don't agree to auth to peer with MS-CHAP",
334       OPT_A2CLRB | MDTYPE_MICROSOFT,
335       &lcp_allowoptions[0].chap_mdtype },
336     { "-mschap", o_bool, &refuse_mschap,
337       "Don't allow MS-CHAP authentication with peer",
338       OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT,
339       &lcp_allowoptions[0].chap_mdtype },
340     { "refuse-mschap-v2", o_bool, &refuse_mschap_v2,
341       "Don't agree to auth to peer with MS-CHAPv2",
342       OPT_A2CLRB | MDTYPE_MICROSOFT_V2,
343       &lcp_allowoptions[0].chap_mdtype },
344     { "-mschap-v2", o_bool, &refuse_mschap_v2,
345       "Don't allow MS-CHAPv2 authentication with peer",
346       OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT_V2,
347       &lcp_allowoptions[0].chap_mdtype },
348 #endif
349
350     { "require-eap", o_bool, &lcp_wantoptions[0].neg_eap,
351       "Require EAP authentication from peer", OPT_PRIOSUB | 1,
352       &auth_required },
353     { "refuse-eap", o_bool, &refuse_eap,
354       "Don't agree to authenticate to peer with EAP", 1 },
355
356     { "name", o_string, our_name,
357       "Set local name for authentication",
358       OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN },
359
360     { "+ua", o_special, (void *)setupapfile,
361       "Get PAP user and password from file",
362       OPT_PRIO | OPT_A2STRVAL, &uafname },
363
364     { "user", o_string, user,
365       "Set name for auth with peer", OPT_PRIO | OPT_STATIC,
366       &explicit_user, MAXNAMELEN },
367
368     { "password", o_string, passwd,
369       "Password for authenticating us to the peer",
370       OPT_PRIO | OPT_STATIC | OPT_HIDE,
371       &explicit_passwd, MAXSECRETLEN },
372
373     { "usehostname", o_bool, &usehostname,
374       "Must use hostname for authentication", 1 },
375
376     { "remotename", o_string, remote_name,
377       "Set remote name for authentication", OPT_PRIO | OPT_STATIC,
378       &explicit_remote, MAXNAMELEN },
379
380     { "login", o_bool, &uselogin,
381       "Use system password database for PAP", OPT_A2COPY | 1 ,
382       &session_mgmt },
383     { "enable-session", o_bool, &session_mgmt,
384       "Enable session accounting for remote peers", OPT_PRIV | 1 },
385
386     { "papcrypt", o_bool, &cryptpap,
387       "PAP passwords are encrypted", 1 },
388
389     { "privgroup", o_special, (void *)privgroup,
390       "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST },
391
392     { "allow-ip", o_special, (void *)set_noauth_addr,
393       "Set IP address(es) which can be used without authentication",
394       OPT_PRIV | OPT_A2LIST },
395
396     { "remotenumber", o_string, remote_number,
397       "Set remote telephone number for authentication", OPT_PRIO | OPT_STATIC,
398       NULL, MAXNAMELEN },
399
400     { "allow-number", o_special, (void *)set_permitted_number,
401       "Set telephone number(s) which are allowed to connect",
402       OPT_PRIV | OPT_A2LIST },
403
404     { NULL }
405 };
406
407 /*
408  * setupapfile - specifies UPAP info for authenticating with peer.
409  */
410 static int
411 setupapfile(argv)
412     char **argv;
413 {
414     FILE *ufile;
415     int l;
416     uid_t euid;
417     char u[MAXNAMELEN], p[MAXSECRETLEN];
418     char *fname;
419
420     lcp_allowoptions[0].neg_upap = 1;
421
422     /* open user info file */
423     fname = strdup(*argv);
424     if (fname == NULL)
425         novm("+ua file name");
426     euid = geteuid();
427     if (seteuid(getuid()) == -1) {
428         option_error("unable to reset uid before opening %s: %m", fname);
429         return 0;
430     }
431     ufile = fopen(fname, "r");
432     if (seteuid(euid) == -1)
433         fatal("unable to regain privileges: %m");
434     if (ufile == NULL) {
435         option_error("unable to open user login data file %s", fname);
436         return 0;
437     }
438     check_access(ufile, fname);
439     uafname = fname;
440
441     /* get username */
442     if (fgets(u, MAXNAMELEN - 1, ufile) == NULL
443         || fgets(p, MAXSECRETLEN - 1, ufile) == NULL) {
444         fclose(ufile);
445         option_error("unable to read user login data file %s", fname);
446         return 0;
447     }
448     fclose(ufile);
449
450     /* get rid of newlines */
451     l = strlen(u);
452     if (l > 0 && u[l-1] == '\n')
453         u[l-1] = 0;
454     l = strlen(p);
455     if (l > 0 && p[l-1] == '\n')
456         p[l-1] = 0;
457
458     if (override_value("user", option_priority, fname)) {
459         strlcpy(user, u, sizeof(user));
460         explicit_user = 1;
461     }
462     if (override_value("passwd", option_priority, fname)) {
463         strlcpy(passwd, p, sizeof(passwd));
464         explicit_passwd = 1;
465     }
466
467     return (1);
468 }
469
470
471 /*
472  * privgroup - allow members of the group to have privileged access.
473  */
474 static int
475 privgroup(argv)
476     char **argv;
477 {
478     struct group *g;
479     int i;
480
481     g = getgrnam(*argv);
482     if (g == 0) {
483         option_error("group %s is unknown", *argv);
484         return 0;
485     }
486     for (i = 0; i < ngroups; ++i) {
487         if (groups[i] == g->gr_gid) {
488             privileged = 1;
489             break;
490         }
491     }
492     return 1;
493 }
494
495
496 /*
497  * set_noauth_addr - set address(es) that can be used without authentication.
498  * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets.
499  */
500 static int
501 set_noauth_addr(argv)
502     char **argv;
503 {
504     char *addr = *argv;
505     int l = strlen(addr) + 1;
506     struct wordlist *wp;
507
508     wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l);
509     if (wp == NULL)
510         novm("allow-ip argument");
511     wp->word = (char *) (wp + 1);
512     wp->next = noauth_addrs;
513     BCOPY(addr, wp->word, l);
514     noauth_addrs = wp;
515     return 1;
516 }
517
518
519 /*
520  * set_permitted_number - set remote telephone number(s) that may connect.
521  */
522 static int
523 set_permitted_number(argv)
524     char **argv;
525 {
526     char *number = *argv;
527     int l = strlen(number) + 1;
528     struct wordlist *wp;
529
530     wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l);
531     if (wp == NULL)
532         novm("allow-number argument");
533     wp->word = (char *) (wp + 1);
534     wp->next = permitted_numbers;
535     BCOPY(number, wp->word, l);
536     permitted_numbers = wp;
537     return 1;
538 }
539
540
541 /*
542  * An Open on LCP has requested a change from Dead to Establish phase.
543  */
544 void
545 link_required(unit)
546     int unit;
547 {
548 }
549
550 /*
551  * Bring the link up to the point of being able to do ppp.
552  */
553 void start_link(unit)
554     int unit;
555 {
556     status = EXIT_CONNECT_FAILED;
557     new_phase(PHASE_SERIALCONN);
558
559     hungup = 0;
560     devfd = the_channel->connect();
561     if (devfd < 0)
562         goto fail;
563
564     /* set up the serial device as a ppp interface */
565     /*
566      * N.B. we used to do tdb_writelock/tdb_writeunlock around this
567      * (from establish_ppp to set_ifunit).  However, we won't be
568      * doing the set_ifunit in multilink mode, which is the only time
569      * we need the atomicity that the tdb_writelock/tdb_writeunlock
570      * gives us.  Thus we don't need the tdb_writelock/tdb_writeunlock.
571      */
572     fd_ppp = the_channel->establish_ppp(devfd);
573     if (fd_ppp < 0) {
574         status = EXIT_FATAL_ERROR;
575         goto disconnect;
576     }
577
578     if (!demand && ifunit >= 0)
579         set_ifunit(1);
580
581     /*
582      * Start opening the connection and wait for
583      * incoming events (reply, timeout, etc.).
584      */
585     if (ifunit >= 0)
586         notice("Connect: %s <--> %s", ifname, ppp_devnam);
587     else
588         notice("Starting negotiation on %s", ppp_devnam);
589     add_fd(fd_ppp);
590
591     status = EXIT_NEGOTIATION_FAILED;
592     new_phase(PHASE_ESTABLISH);
593
594     lcp_lowerup(0);
595     return;
596
597  disconnect:
598     new_phase(PHASE_DISCONNECT);
599     if (the_channel->disconnect)
600         the_channel->disconnect();
601
602  fail:
603     new_phase(PHASE_DEAD);
604     if (the_channel->cleanup)
605         (*the_channel->cleanup)();
606 }
607
608 /*
609  * LCP has terminated the link; go to the Dead phase and take the
610  * physical layer down.
611  */
612 void
613 link_terminated(unit)
614     int unit;
615 {
616     if (phase == PHASE_DEAD || phase == PHASE_MASTER)
617         return;
618     new_phase(PHASE_DISCONNECT);
619
620     if (pap_logout_hook) {
621         pap_logout_hook();
622     }
623     session_end(devnam);
624
625     if (!doing_multilink) {
626         notice("Connection terminated.");
627         print_link_stats();
628     } else
629         notice("Link terminated.");
630
631     /*
632      * Delete pid files before disestablishing ppp.  Otherwise it
633      * can happen that another pppd gets the same unit and then
634      * we delete its pid file.
635      */
636     if (!doing_multilink && !demand)
637         remove_pidfiles();
638
639     /*
640      * If we may want to bring the link up again, transfer
641      * the ppp unit back to the loopback.  Set the
642      * real serial device back to its normal mode of operation.
643      */
644     if (fd_ppp >= 0) {
645         remove_fd(fd_ppp);
646         clean_check();
647         the_channel->disestablish_ppp(devfd);
648         if (doing_multilink)
649             mp_exit_bundle();
650         fd_ppp = -1;
651     }
652     if (!hungup)
653         lcp_lowerdown(0);
654     if (!doing_multilink && !demand)
655         script_unsetenv("IFNAME");
656
657     /*
658      * Run disconnector script, if requested.
659      * XXX we may not be able to do this if the line has hung up!
660      */
661     if (devfd >= 0 && the_channel->disconnect) {
662         the_channel->disconnect();
663         devfd = -1;
664     }
665     if (the_channel->cleanup)
666         (*the_channel->cleanup)();
667
668     if (doing_multilink && multilink_master) {
669         if (!bundle_terminating) {
670             new_phase(PHASE_MASTER);
671             if (master_detach && !detached)
672                 detach();
673         } else
674             mp_bundle_terminated();
675     } else
676         new_phase(PHASE_DEAD);
677 }
678
679 /*
680  * LCP has gone down; it will either die or try to re-establish.
681  */
682 void
683 link_down(unit)
684     int unit;
685 {
686     if (auth_state != s_down) {
687         notify(link_down_notifier, 0);
688         auth_state = s_down;
689         if (auth_script_state == s_up && auth_script_pid == 0) {
690             update_link_stats(unit);
691             auth_script_state = s_down;
692             auth_script(_PATH_AUTHDOWN);
693         }
694     }
695     if (!doing_multilink) {
696         upper_layers_down(unit);
697         if (phase != PHASE_DEAD && phase != PHASE_MASTER)
698             new_phase(PHASE_ESTABLISH);
699     }
700     /* XXX if doing_multilink, should do something to stop
701        network-layer traffic on the link */
702 }
703
704 void upper_layers_down(int unit)
705 {
706     int i;
707     struct protent *protp;
708
709     for (i = 0; (protp = protocols[i]) != NULL; ++i) {
710         if (!protp->enabled_flag)
711             continue;
712         if (protp->protocol != PPP_LCP && protp->lowerdown != NULL)
713             (*protp->lowerdown)(unit);
714         if (protp->protocol < 0xC000 && protp->close != NULL)
715             (*protp->close)(unit, "LCP down");
716     }
717     num_np_open = 0;
718     num_np_up = 0;
719 }
720
721 /*
722  * The link is established.
723  * Proceed to the Dead, Authenticate or Network phase as appropriate.
724  */
725 void
726 link_established(unit)
727     int unit;
728 {
729     int auth;
730     lcp_options *wo = &lcp_wantoptions[unit];
731     lcp_options *go = &lcp_gotoptions[unit];
732     lcp_options *ho = &lcp_hisoptions[unit];
733     int i;
734     struct protent *protp;
735
736     /*
737      * Tell higher-level protocols that LCP is up.
738      */
739     if (!doing_multilink) {
740         for (i = 0; (protp = protocols[i]) != NULL; ++i)
741             if (protp->protocol != PPP_LCP && protp->enabled_flag
742                 && protp->lowerup != NULL)
743                 (*protp->lowerup)(unit);
744     }
745
746     if (!auth_required && noauth_addrs != NULL)
747         set_allowed_addrs(unit, NULL, NULL);
748
749     if (auth_required && !(go->neg_upap || go->neg_chap || go->neg_eap)) {
750         /*
751          * We wanted the peer to authenticate itself, and it refused:
752          * if we have some address(es) it can use without auth, fine,
753          * otherwise treat it as though it authenticated with PAP using
754          * a username of "" and a password of "".  If that's not OK,
755          * boot it out.
756          */
757         if (noauth_addrs != NULL) {
758             set_allowed_addrs(unit, NULL, NULL);
759         } else if (!wo->neg_upap || uselogin || !null_login(unit)) {
760             warn("peer refused to authenticate: terminating link");
761             status = EXIT_PEER_AUTH_FAILED;
762             lcp_close(unit, "peer refused to authenticate");
763             return;
764         }
765     }
766
767     new_phase(PHASE_AUTHENTICATE);
768     auth = 0;
769     if (go->neg_eap) {
770         eap_authpeer(unit, our_name);
771         auth |= EAP_PEER;
772     } else if (go->neg_chap) {
773         chap_auth_peer(unit, our_name, CHAP_DIGEST(go->chap_mdtype));
774         auth |= CHAP_PEER;
775     } else if (go->neg_upap) {
776         upap_authpeer(unit);
777         auth |= PAP_PEER;
778     }
779     if (ho->neg_eap) {
780         eap_authwithpeer(unit, user);
781         auth |= EAP_WITHPEER;
782     } else if (ho->neg_chap) {
783         chap_auth_with_peer(unit, user, CHAP_DIGEST(ho->chap_mdtype));
784         auth |= CHAP_WITHPEER;
785     } else if (ho->neg_upap) {
786         /* If a blank password was explicitly given as an option, trust
787            the user and don't try to look up one. */
788         if (passwd[0] == 0 && !explicit_passwd) {
789             passwd_from_file = 1;
790             if (!get_pap_passwd(passwd))
791                 error("No secret found for PAP login");
792         }
793         upap_authwithpeer(unit, user, passwd);
794         auth |= PAP_WITHPEER;
795     }
796     auth_pending[unit] = auth;
797     auth_done[unit] = 0;
798
799     if (!auth)
800         network_phase(unit);
801 }
802
803 /*
804  * Proceed to the network phase.
805  */
806 static void
807 network_phase(unit)
808     int unit;
809 {
810     lcp_options *go = &lcp_gotoptions[unit];
811
812     /* Log calling number. */
813     if (*remote_number)
814         notice("peer from calling number %q authorized", remote_number);
815
816     /*
817      * If the peer had to authenticate, run the auth-up script now.
818      */
819     if (go->neg_chap || go->neg_upap || go->neg_eap) {
820         notify(auth_up_notifier, 0);
821         auth_state = s_up;
822         if (auth_script_state == s_down && auth_script_pid == 0) {
823             auth_script_state = s_up;
824             auth_script(_PATH_AUTHUP);
825         }
826     }
827
828 #ifdef CBCP_SUPPORT
829     /*
830      * If we negotiated callback, do it now.
831      */
832     if (go->neg_cbcp) {
833         new_phase(PHASE_CALLBACK);
834         (*cbcp_protent.open)(unit);
835         return;
836     }
837 #endif
838
839     /*
840      * Process extra options from the secrets file
841      */
842     if (extra_options) {
843         options_from_list(extra_options, 1);
844         free_wordlist(extra_options);
845         extra_options = 0;
846     }
847     start_networks(unit);
848 }
849
850 void
851 start_networks(unit)
852     int unit;
853 {
854     int i;
855     struct protent *protp;
856     int ecp_required, mppe_required;
857
858     new_phase(PHASE_NETWORK);
859
860 #ifdef HAVE_MULTILINK
861     if (multilink) {
862         if (mp_join_bundle()) {
863             if (multilink_join_hook)
864                 (*multilink_join_hook)();
865             if (updetach && !nodetach)
866                 detach();
867             return;
868         }
869     }
870 #endif /* HAVE_MULTILINK */
871
872 #ifdef PPP_FILTER
873     if (!demand)
874         set_filters(&pass_filter, &active_filter);
875 #endif
876     /* Start CCP and ECP */
877     for (i = 0; (protp = protocols[i]) != NULL; ++i)
878         if ((protp->protocol == PPP_ECP || protp->protocol == PPP_CCP)
879             && protp->enabled_flag && protp->open != NULL)
880             (*protp->open)(0);
881
882     /*
883      * Bring up other network protocols iff encryption is not required.
884      */
885     ecp_required = ecp_gotoptions[unit].required;
886     mppe_required = ccp_gotoptions[unit].mppe;
887     if (!ecp_required && !mppe_required)
888         continue_networks(unit);
889 }
890
891 void
892 continue_networks(unit)
893     int unit;
894 {
895     int i;
896     struct protent *protp;
897
898     /*
899      * Start the "real" network protocols.
900      */
901     for (i = 0; (protp = protocols[i]) != NULL; ++i)
902         if (protp->protocol < 0xC000
903             && protp->protocol != PPP_CCP && protp->protocol != PPP_ECP
904             && protp->enabled_flag && protp->open != NULL) {
905             (*protp->open)(0);
906             ++num_np_open;
907         }
908
909     if (num_np_open == 0)
910         /* nothing to do */
911         lcp_close(0, "No network protocols running");
912 }
913
914 /*
915  * The peer has failed to authenticate himself using `protocol'.
916  */
917 void
918 auth_peer_fail(unit, protocol)
919     int unit, protocol;
920 {
921     /*
922      * Authentication failure: take the link down
923      */
924     status = EXIT_PEER_AUTH_FAILED;
925     lcp_close(unit, "Authentication failed");
926 }
927
928 /*
929  * The peer has been successfully authenticated using `protocol'.
930  */
931 void
932 auth_peer_success(unit, protocol, prot_flavor, name, namelen)
933     int unit, protocol, prot_flavor;
934     char *name;
935     int namelen;
936 {
937     int bit;
938
939     switch (protocol) {
940     case PPP_CHAP:
941         bit = CHAP_PEER;
942         switch (prot_flavor) {
943         case CHAP_MD5:
944             bit |= CHAP_MD5_PEER;
945             break;
946 #ifdef CHAPMS
947         case CHAP_MICROSOFT:
948             bit |= CHAP_MS_PEER;
949             break;
950         case CHAP_MICROSOFT_V2:
951             bit |= CHAP_MS2_PEER;
952             break;
953 #endif
954         }
955         break;
956     case PPP_PAP:
957         bit = PAP_PEER;
958         break;
959     case PPP_EAP:
960         bit = EAP_PEER;
961         break;
962     default:
963         warn("auth_peer_success: unknown protocol %x", protocol);
964         return;
965     }
966
967     /*
968      * Save the authenticated name of the peer for later.
969      */
970     if (namelen > sizeof(peer_authname) - 1)
971         namelen = sizeof(peer_authname) - 1;
972     BCOPY(name, peer_authname, namelen);
973     peer_authname[namelen] = 0;
974     script_setenv("PEERNAME", peer_authname, 0);
975
976     /* Save the authentication method for later. */
977     auth_done[unit] |= bit;
978
979     /*
980      * If there is no more authentication still to be done,
981      * proceed to the network (or callback) phase.
982      */
983     if ((auth_pending[unit] &= ~bit) == 0)
984         network_phase(unit);
985 }
986
987 /*
988  * We have failed to authenticate ourselves to the peer using `protocol'.
989  */
990 void
991 auth_withpeer_fail(unit, protocol)
992     int unit, protocol;
993 {
994     if (passwd_from_file)
995         BZERO(passwd, MAXSECRETLEN);
996     /*
997      * We've failed to authenticate ourselves to our peer.
998      * Some servers keep sending CHAP challenges, but there
999      * is no point in persisting without any way to get updated
1000      * authentication secrets.
1001      */
1002     status = EXIT_AUTH_TOPEER_FAILED;
1003     lcp_close(unit, "Failed to authenticate ourselves to peer");
1004 }
1005
1006 /*
1007  * We have successfully authenticated ourselves with the peer using `protocol'.
1008  */
1009 void
1010 auth_withpeer_success(unit, protocol, prot_flavor)
1011     int unit, protocol, prot_flavor;
1012 {
1013     int bit;
1014     const char *prot = "";
1015
1016     switch (protocol) {
1017     case PPP_CHAP:
1018         bit = CHAP_WITHPEER;
1019         prot = "CHAP";
1020         switch (prot_flavor) {
1021         case CHAP_MD5:
1022             bit |= CHAP_MD5_WITHPEER;
1023             break;
1024 #ifdef CHAPMS
1025         case CHAP_MICROSOFT:
1026             bit |= CHAP_MS_WITHPEER;
1027             break;
1028         case CHAP_MICROSOFT_V2:
1029             bit |= CHAP_MS2_WITHPEER;
1030             break;
1031 #endif
1032         }
1033         break;
1034     case PPP_PAP:
1035         if (passwd_from_file)
1036             BZERO(passwd, MAXSECRETLEN);
1037         bit = PAP_WITHPEER;
1038         prot = "PAP";
1039         break;
1040     case PPP_EAP:
1041         bit = EAP_WITHPEER;
1042         prot = "EAP";
1043         break;
1044     default:
1045         warn("auth_withpeer_success: unknown protocol %x", protocol);
1046         bit = 0;
1047     }
1048
1049     notice("%s authentication succeeded", prot);
1050
1051     /* Save the authentication method for later. */
1052     auth_done[unit] |= bit;
1053
1054     /*
1055      * If there is no more authentication still being done,
1056      * proceed to the network (or callback) phase.
1057      */
1058     if ((auth_pending[unit] &= ~bit) == 0)
1059         network_phase(unit);
1060 }
1061
1062
1063 /*
1064  * np_up - a network protocol has come up.
1065  */
1066 void
1067 np_up(unit, proto)
1068     int unit, proto;
1069 {
1070     int tlim;
1071
1072     if (num_np_up == 0) {
1073         /*
1074          * At this point we consider that the link has come up successfully.
1075          */
1076         status = EXIT_OK;
1077         unsuccess = 0;
1078         new_phase(PHASE_RUNNING);
1079
1080         if (idle_time_hook != 0)
1081             tlim = (*idle_time_hook)(NULL);
1082         else
1083             tlim = idle_time_limit;
1084         if (tlim > 0)
1085             TIMEOUT(check_idle, NULL, tlim);
1086
1087         /*
1088          * Set a timeout to close the connection once the maximum
1089          * connect time has expired.
1090          */
1091         if (maxconnect > 0)
1092             TIMEOUT(connect_time_expired, 0, maxconnect);
1093
1094 #ifdef MAXOCTETS
1095         if (maxoctets > 0)
1096             TIMEOUT(check_maxoctets, NULL, maxoctets_timeout);
1097 #endif
1098
1099         /*
1100          * Detach now, if the updetach option was given.
1101          */
1102         if (updetach && !nodetach)
1103             detach();
1104     }
1105     ++num_np_up;
1106 }
1107
1108 /*
1109  * np_down - a network protocol has gone down.
1110  */
1111 void
1112 np_down(unit, proto)
1113     int unit, proto;
1114 {
1115     if (--num_np_up == 0) {
1116         UNTIMEOUT(check_idle, NULL);
1117         UNTIMEOUT(connect_time_expired, NULL);
1118 #ifdef MAXOCTETS
1119         UNTIMEOUT(check_maxoctets, NULL);
1120 #endif  
1121         new_phase(PHASE_NETWORK);
1122     }
1123 }
1124
1125 /*
1126  * np_finished - a network protocol has finished using the link.
1127  */
1128 void
1129 np_finished(unit, proto)
1130     int unit, proto;
1131 {
1132     if (--num_np_open <= 0) {
1133         /* no further use for the link: shut up shop. */
1134         lcp_close(0, "No network protocols running");
1135     }
1136 }
1137
1138 #ifdef MAXOCTETS
1139 static void
1140 check_maxoctets(arg)
1141     void *arg;
1142 {
1143     unsigned int used;
1144
1145     update_link_stats(ifunit);
1146     link_stats_valid=0;
1147     
1148     switch(maxoctets_dir) {
1149         case PPP_OCTETS_DIRECTION_IN:
1150             used = link_stats.bytes_in;
1151             break;
1152         case PPP_OCTETS_DIRECTION_OUT:
1153             used = link_stats.bytes_out;
1154             break;
1155         case PPP_OCTETS_DIRECTION_MAXOVERAL:
1156         case PPP_OCTETS_DIRECTION_MAXSESSION:
1157             used = (link_stats.bytes_in > link_stats.bytes_out) ? link_stats.bytes_in : link_stats.bytes_out;
1158             break;
1159         default:
1160             used = link_stats.bytes_in+link_stats.bytes_out;
1161             break;
1162     }
1163     if (used > maxoctets) {
1164         notice("Traffic limit reached. Limit: %u Used: %u", maxoctets, used);
1165         status = EXIT_TRAFFIC_LIMIT;
1166         lcp_close(0, "Traffic limit");
1167         need_holdoff = 0;
1168     } else {
1169         TIMEOUT(check_maxoctets, NULL, maxoctets_timeout);
1170     }
1171 }
1172 #endif
1173
1174 /*
1175  * check_idle - check whether the link has been idle for long
1176  * enough that we can shut it down.
1177  */
1178 static void
1179 check_idle(arg)
1180     void *arg;
1181 {
1182     struct ppp_idle idle;
1183     time_t itime;
1184     int tlim;
1185
1186     if (!get_idle_time(0, &idle))
1187         return;
1188     if (idle_time_hook != 0) {
1189         tlim = idle_time_hook(&idle);
1190     } else {
1191         itime = MIN(idle.xmit_idle, idle.recv_idle);
1192         tlim = idle_time_limit - itime;
1193     }
1194     if (tlim <= 0) {
1195         /* link is idle: shut it down. */
1196         notice("Terminating connection due to lack of activity.");
1197         status = EXIT_IDLE_TIMEOUT;
1198         lcp_close(0, "Link inactive");
1199         need_holdoff = 0;
1200     } else {
1201         TIMEOUT(check_idle, NULL, tlim);
1202     }
1203 }
1204
1205 /*
1206  * connect_time_expired - log a message and close the connection.
1207  */
1208 static void
1209 connect_time_expired(arg)
1210     void *arg;
1211 {
1212     info("Connect time expired");
1213     status = EXIT_CONNECT_TIME;
1214     lcp_close(0, "Connect time expired");       /* Close connection */
1215 }
1216
1217 /*
1218  * auth_check_options - called to check authentication options.
1219  */
1220 void
1221 auth_check_options()
1222 {
1223     lcp_options *wo = &lcp_wantoptions[0];
1224     int can_auth;
1225     int lacks_ip;
1226
1227     /* Default our_name to hostname, and user to our_name */
1228     if (our_name[0] == 0 || usehostname)
1229         strlcpy(our_name, hostname, sizeof(our_name));
1230     /* If a blank username was explicitly given as an option, trust
1231        the user and don't use our_name */
1232     if (user[0] == 0 && !explicit_user)
1233         strlcpy(user, our_name, sizeof(user));
1234
1235     /*
1236      * If we have a default route, require the peer to authenticate
1237      * unless the noauth option was given or the real user is root.
1238      */
1239     if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) {
1240         auth_required = 1;
1241         default_auth = 1;
1242     }
1243
1244     /* If we selected any CHAP flavors, we should probably negotiate it. :-) */
1245     if (wo->chap_mdtype)
1246         wo->neg_chap = 1;
1247
1248     /* If authentication is required, ask peer for CHAP, PAP, or EAP. */
1249     if (auth_required) {
1250         allow_any_ip = 0;
1251         if (!wo->neg_chap && !wo->neg_upap && !wo->neg_eap) {
1252             wo->neg_chap = chap_mdtype_all != MDTYPE_NONE;
1253             wo->chap_mdtype = chap_mdtype_all;
1254             wo->neg_upap = 1;
1255             wo->neg_eap = 1;
1256         }
1257     } else {
1258         wo->neg_chap = 0;
1259         wo->chap_mdtype = MDTYPE_NONE;
1260         wo->neg_upap = 0;
1261         wo->neg_eap = 0;
1262     }
1263
1264     /*
1265      * Check whether we have appropriate secrets to use
1266      * to authenticate the peer.  Note that EAP can authenticate by way
1267      * of a CHAP-like exchanges as well as SRP.
1268      */
1269     lacks_ip = 0;
1270     can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip));
1271     if (!can_auth && (wo->neg_chap || wo->neg_eap)) {
1272         can_auth = have_chap_secret((explicit_remote? remote_name: NULL),
1273                                     our_name, 1, &lacks_ip);
1274     }
1275     if (!can_auth && wo->neg_eap) {
1276         can_auth = have_srp_secret((explicit_remote? remote_name: NULL),
1277                                     our_name, 1, &lacks_ip);
1278     }
1279
1280     if (auth_required && !can_auth && noauth_addrs == NULL) {
1281         if (default_auth) {
1282             option_error(
1283 "By default the remote system is required to authenticate itself");
1284             option_error(
1285 "(because this system has a default route to the internet)");
1286         } else if (explicit_remote)
1287             option_error(
1288 "The remote system (%s) is required to authenticate itself",
1289                          remote_name);
1290         else
1291             option_error(
1292 "The remote system is required to authenticate itself");
1293         option_error(
1294 "but I couldn't find any suitable secret (password) for it to use to do so.");
1295         if (lacks_ip)
1296             option_error(
1297 "(None of the available passwords would let it use an IP address.)");
1298
1299         exit(1);
1300     }
1301
1302     /*
1303      * Early check for remote number authorization.
1304      */
1305     if (!auth_number()) {
1306         warn("calling number %q is not authorized", remote_number);
1307         exit(EXIT_CNID_AUTH_FAILED);
1308     }
1309 }
1310
1311 /*
1312  * auth_reset - called when LCP is starting negotiations to recheck
1313  * authentication options, i.e. whether we have appropriate secrets
1314  * to use for authenticating ourselves and/or the peer.
1315  */
1316 void
1317 auth_reset(unit)
1318     int unit;
1319 {
1320     lcp_options *go = &lcp_gotoptions[unit];
1321     lcp_options *ao = &lcp_allowoptions[unit];
1322     int hadchap;
1323
1324     hadchap = -1;
1325     ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL));
1326     ao->neg_chap = (!refuse_chap || !refuse_mschap || !refuse_mschap_v2)
1327         && (passwd[0] != 0 ||
1328             (hadchap = have_chap_secret(user, (explicit_remote? remote_name:
1329                                                NULL), 0, NULL)));
1330     ao->neg_eap = !refuse_eap && (
1331         passwd[0] != 0 ||
1332         (hadchap == 1 || (hadchap == -1 && have_chap_secret(user,
1333             (explicit_remote? remote_name: NULL), 0, NULL))) ||
1334         have_srp_secret(user, (explicit_remote? remote_name: NULL), 0, NULL));
1335
1336     hadchap = -1;
1337     if (go->neg_upap && !uselogin && !have_pap_secret(NULL))
1338         go->neg_upap = 0;
1339     if (go->neg_chap) {
1340         if (!(hadchap = have_chap_secret((explicit_remote? remote_name: NULL),
1341                               our_name, 1, NULL)))
1342             go->neg_chap = 0;
1343     }
1344     if (go->neg_eap &&
1345         (hadchap == 0 || (hadchap == -1 &&
1346             !have_chap_secret((explicit_remote? remote_name: NULL), our_name,
1347                 1, NULL))) &&
1348         !have_srp_secret((explicit_remote? remote_name: NULL), our_name, 1,
1349             NULL))
1350         go->neg_eap = 0;
1351 }
1352
1353
1354 /*
1355  * check_passwd - Check the user name and passwd against the PAP secrets
1356  * file.  If requested, also check against the system password database,
1357  * and login the user if OK.
1358  *
1359  * returns:
1360  *      UPAP_AUTHNAK: Authentication failed.
1361  *      UPAP_AUTHACK: Authentication succeeded.
1362  * In either case, msg points to an appropriate message.
1363  */
1364 int
1365 check_passwd(unit, auser, userlen, apasswd, passwdlen, msg)
1366     int unit;
1367     char *auser;
1368     int userlen;
1369     char *apasswd;
1370     int passwdlen;
1371     char **msg;
1372 {
1373     int ret;
1374     char *filename;
1375     FILE *f;
1376     struct wordlist *addrs = NULL, *opts = NULL;
1377     char passwd[256], user[256];
1378     char secret[MAXWORDLEN];
1379     static int attempts = 0;
1380
1381     /*
1382      * Make copies of apasswd and auser, then null-terminate them.
1383      * If there are unprintable characters in the password, make
1384      * them visible.
1385      */
1386     slprintf(passwd, sizeof(passwd), "%.*v", passwdlen, apasswd);
1387     slprintf(user, sizeof(user), "%.*v", userlen, auser);
1388     *msg = "";
1389
1390     /*
1391      * Check if a plugin wants to handle this.
1392      */
1393     if (pap_auth_hook) {
1394         ret = (*pap_auth_hook)(user, passwd, msg, &addrs, &opts);
1395         if (ret >= 0) {
1396             /* note: set_allowed_addrs() saves opts (but not addrs):
1397                don't free it! */
1398             if (ret)
1399                 set_allowed_addrs(unit, addrs, opts);
1400             else if (opts != 0)
1401                 free_wordlist(opts);
1402             if (addrs != 0)
1403                 free_wordlist(addrs);
1404             BZERO(passwd, sizeof(passwd));
1405             return ret? UPAP_AUTHACK: UPAP_AUTHNAK;
1406         }
1407     }
1408
1409     /*
1410      * Open the file of pap secrets and scan for a suitable secret
1411      * for authenticating this user.
1412      */
1413     filename = _PATH_UPAPFILE;
1414     addrs = opts = NULL;
1415     ret = UPAP_AUTHNAK;
1416     f = fopen(filename, "r");
1417     if (f == NULL) {
1418         error("Can't open PAP password file %s: %m", filename);
1419
1420     } else {
1421         check_access(f, filename);
1422         if (scan_authfile(f, user, our_name, secret, &addrs, &opts, filename, 0) < 0) {
1423             warn("no PAP secret found for %s", user);
1424         } else {
1425             /*
1426              * If the secret is "@login", it means to check
1427              * the password against the login database.
1428              */
1429             int login_secret = strcmp(secret, "@login") == 0;
1430             ret = UPAP_AUTHACK;
1431             if (uselogin || login_secret) {
1432                 /* login option or secret is @login */
1433                 if (session_full(user, passwd, devnam, msg) == 0) {
1434                     ret = UPAP_AUTHNAK;
1435                 }
1436             } else if (session_mgmt) {
1437                 if (session_check(user, NULL, devnam, NULL) == 0) {
1438                     warn("Peer %q failed PAP Session verification", user);
1439                     ret = UPAP_AUTHNAK;
1440                 }
1441             }
1442             if (secret[0] != 0 && !login_secret) {
1443                 /* password given in pap-secrets - must match */
1444                 if (cryptpap || strcmp(passwd, secret) != 0) {
1445                     char *cbuf = crypt(passwd, secret);
1446                     if (!cbuf || strcmp(cbuf, secret) != 0)
1447                         ret = UPAP_AUTHNAK;
1448                 }
1449             }
1450         }
1451         fclose(f);
1452     }
1453
1454     if (ret == UPAP_AUTHNAK) {
1455         if (**msg == 0)
1456             *msg = "Login incorrect";
1457         /*
1458          * XXX can we ever get here more than once??
1459          * Frustrate passwd stealer programs.
1460          * Allow 10 tries, but start backing off after 3 (stolen from login).
1461          * On 10'th, drop the connection.
1462          */
1463         if (attempts++ >= 10) {
1464             warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user);
1465             lcp_close(unit, "login failed");
1466         }
1467         if (attempts > 3)
1468             sleep((u_int) (attempts - 3) * 5);
1469         if (opts != NULL)
1470             free_wordlist(opts);
1471
1472     } else {
1473         attempts = 0;                   /* Reset count */
1474         if (**msg == 0)
1475             *msg = "Login ok";
1476         set_allowed_addrs(unit, addrs, opts);
1477     }
1478
1479     if (addrs != NULL)
1480         free_wordlist(addrs);
1481     BZERO(passwd, sizeof(passwd));
1482     BZERO(secret, sizeof(secret));
1483
1484     return ret;
1485 }
1486
1487 /*
1488  * null_login - Check if a username of "" and a password of "" are
1489  * acceptable, and iff so, set the list of acceptable IP addresses
1490  * and return 1.
1491  */
1492 static int
1493 null_login(unit)
1494     int unit;
1495 {
1496     char *filename;
1497     FILE *f;
1498     int i, ret;
1499     struct wordlist *addrs, *opts;
1500     char secret[MAXWORDLEN];
1501
1502     /*
1503      * Check if a plugin wants to handle this.
1504      */
1505     ret = -1;
1506     if (null_auth_hook)
1507         ret = (*null_auth_hook)(&addrs, &opts);
1508
1509     /*
1510      * Open the file of pap secrets and scan for a suitable secret.
1511      */
1512     if (ret <= 0) {
1513         filename = _PATH_UPAPFILE;
1514         addrs = NULL;
1515         f = fopen(filename, "r");
1516         if (f == NULL)
1517             return 0;
1518         check_access(f, filename);
1519
1520         i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename, 0);
1521         ret = i >= 0 && secret[0] == 0;
1522         BZERO(secret, sizeof(secret));
1523         fclose(f);
1524     }
1525
1526     if (ret)
1527         set_allowed_addrs(unit, addrs, opts);
1528     else if (opts != 0)
1529         free_wordlist(opts);
1530     if (addrs != 0)
1531         free_wordlist(addrs);
1532
1533     return ret;
1534 }
1535
1536
1537 /*
1538  * get_pap_passwd - get a password for authenticating ourselves with
1539  * our peer using PAP.  Returns 1 on success, 0 if no suitable password
1540  * could be found.
1541  * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null).
1542  */
1543 static int
1544 get_pap_passwd(passwd)
1545     char *passwd;
1546 {
1547     char *filename;
1548     FILE *f;
1549     int ret;
1550     char secret[MAXWORDLEN];
1551
1552     /*
1553      * Check whether a plugin wants to supply this.
1554      */
1555     if (pap_passwd_hook) {
1556         ret = (*pap_passwd_hook)(user, passwd);
1557         if (ret >= 0)
1558             return ret;
1559     }
1560
1561     filename = _PATH_UPAPFILE;
1562     f = fopen(filename, "r");
1563     if (f == NULL)
1564         return 0;
1565     check_access(f, filename);
1566     ret = scan_authfile(f, user,
1567                         (remote_name[0]? remote_name: NULL),
1568                         secret, NULL, NULL, filename, 0);
1569     fclose(f);
1570     if (ret < 0)
1571         return 0;
1572     if (passwd != NULL)
1573         strlcpy(passwd, secret, MAXSECRETLEN);
1574     BZERO(secret, sizeof(secret));
1575     return 1;
1576 }
1577
1578
1579 /*
1580  * have_pap_secret - check whether we have a PAP file with any
1581  * secrets that we could possibly use for authenticating the peer.
1582  */
1583 static int
1584 have_pap_secret(lacks_ipp)
1585     int *lacks_ipp;
1586 {
1587     FILE *f;
1588     int ret;
1589     char *filename;
1590     struct wordlist *addrs;
1591
1592     /* let the plugin decide, if there is one */
1593     if (pap_check_hook) {
1594         ret = (*pap_check_hook)();
1595         if (ret >= 0)
1596             return ret;
1597     }
1598
1599     filename = _PATH_UPAPFILE;
1600     f = fopen(filename, "r");
1601     if (f == NULL)
1602         return 0;
1603
1604     ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name,
1605                         NULL, &addrs, NULL, filename, 0);
1606     fclose(f);
1607     if (ret >= 0 && !some_ip_ok(addrs)) {
1608         if (lacks_ipp != 0)
1609             *lacks_ipp = 1;
1610         ret = -1;
1611     }
1612     if (addrs != 0)
1613         free_wordlist(addrs);
1614
1615     return ret >= 0;
1616 }
1617
1618
1619 /*
1620  * have_chap_secret - check whether we have a CHAP file with a
1621  * secret that we could possibly use for authenticating `client'
1622  * on `server'.  Either can be the null string, meaning we don't
1623  * know the identity yet.
1624  */
1625 static int
1626 have_chap_secret(client, server, need_ip, lacks_ipp)
1627     char *client;
1628     char *server;
1629     int need_ip;
1630     int *lacks_ipp;
1631 {
1632     FILE *f;
1633     int ret;
1634     char *filename;
1635     struct wordlist *addrs;
1636
1637     if (chap_check_hook) {
1638         ret = (*chap_check_hook)();
1639         if (ret >= 0) {
1640             return ret;
1641         }
1642     }
1643
1644     filename = _PATH_CHAPFILE;
1645     f = fopen(filename, "r");
1646     if (f == NULL)
1647         return 0;
1648
1649     if (client != NULL && client[0] == 0)
1650         client = NULL;
1651     else if (server != NULL && server[0] == 0)
1652         server = NULL;
1653
1654     ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0);
1655     fclose(f);
1656     if (ret >= 0 && need_ip && !some_ip_ok(addrs)) {
1657         if (lacks_ipp != 0)
1658             *lacks_ipp = 1;
1659         ret = -1;
1660     }
1661     if (addrs != 0)
1662         free_wordlist(addrs);
1663
1664     return ret >= 0;
1665 }
1666
1667
1668 /*
1669  * have_srp_secret - check whether we have a SRP file with a
1670  * secret that we could possibly use for authenticating `client'
1671  * on `server'.  Either can be the null string, meaning we don't
1672  * know the identity yet.
1673  */
1674 static int
1675 have_srp_secret(client, server, need_ip, lacks_ipp)
1676     char *client;
1677     char *server;
1678     int need_ip;
1679     int *lacks_ipp;
1680 {
1681     FILE *f;
1682     int ret;
1683     char *filename;
1684     struct wordlist *addrs;
1685
1686     filename = _PATH_SRPFILE;
1687     f = fopen(filename, "r");
1688     if (f == NULL)
1689         return 0;
1690
1691     if (client != NULL && client[0] == 0)
1692         client = NULL;
1693     else if (server != NULL && server[0] == 0)
1694         server = NULL;
1695
1696     ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0);
1697     fclose(f);
1698     if (ret >= 0 && need_ip && !some_ip_ok(addrs)) {
1699         if (lacks_ipp != 0)
1700             *lacks_ipp = 1;
1701         ret = -1;
1702     }
1703     if (addrs != 0)
1704         free_wordlist(addrs);
1705
1706     return ret >= 0;
1707 }
1708
1709
1710 /*
1711  * get_secret - open the CHAP secret file and return the secret
1712  * for authenticating the given client on the given server.
1713  * (We could be either client or server).
1714  */
1715 int
1716 get_secret(unit, client, server, secret, secret_len, am_server)
1717     int unit;
1718     char *client;
1719     char *server;
1720     char *secret;
1721     int *secret_len;
1722     int am_server;
1723 {
1724     FILE *f;
1725     int ret, len;
1726     char *filename;
1727     struct wordlist *addrs, *opts;
1728     char secbuf[MAXWORDLEN];
1729
1730     if (!am_server && passwd[0] != 0) {
1731         strlcpy(secbuf, passwd, sizeof(secbuf));
1732     } else if (!am_server && chap_passwd_hook) {
1733         if ( (*chap_passwd_hook)(client, secbuf) < 0) {
1734             error("Unable to obtain CHAP password for %s on %s from plugin",
1735                   client, server);
1736             return 0;
1737         }
1738     } else {
1739         filename = _PATH_CHAPFILE;
1740         addrs = NULL;
1741         secbuf[0] = 0;
1742
1743         f = fopen(filename, "r");
1744         if (f == NULL) {
1745             error("Can't open chap secret file %s: %m", filename);
1746             return 0;
1747         }
1748         check_access(f, filename);
1749
1750         ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename, 0);
1751         fclose(f);
1752         if (ret < 0)
1753             return 0;
1754
1755         if (am_server)
1756             set_allowed_addrs(unit, addrs, opts);
1757         else if (opts != 0)
1758             free_wordlist(opts);
1759         if (addrs != 0)
1760             free_wordlist(addrs);
1761     }
1762
1763     len = strlen(secbuf);
1764     if (len > MAXSECRETLEN) {
1765         error("Secret for %s on %s is too long", client, server);
1766         len = MAXSECRETLEN;
1767     }
1768     BCOPY(secbuf, secret, len);
1769     BZERO(secbuf, sizeof(secbuf));
1770     *secret_len = len;
1771
1772     return 1;
1773 }
1774
1775
1776 /*
1777  * get_srp_secret - open the SRP secret file and return the secret
1778  * for authenticating the given client on the given server.
1779  * (We could be either client or server).
1780  */
1781 int
1782 get_srp_secret(unit, client, server, secret, am_server)
1783     int unit;
1784     char *client;
1785     char *server;
1786     char *secret;
1787     int am_server;
1788 {
1789     FILE *fp;
1790     int ret;
1791     char *filename;
1792     struct wordlist *addrs, *opts;
1793
1794     if (!am_server && passwd[0] != '\0') {
1795         strlcpy(secret, passwd, MAXWORDLEN);
1796     } else {
1797         filename = _PATH_SRPFILE;
1798         addrs = NULL;
1799
1800         fp = fopen(filename, "r");
1801         if (fp == NULL) {
1802             error("Can't open srp secret file %s: %m", filename);
1803             return 0;
1804         }
1805         check_access(fp, filename);
1806
1807         secret[0] = '\0';
1808         ret = scan_authfile(fp, client, server, secret, &addrs, &opts,
1809             filename, am_server);
1810         fclose(fp);
1811         if (ret < 0)
1812             return 0;
1813
1814         if (am_server)
1815             set_allowed_addrs(unit, addrs, opts);
1816         else if (opts != NULL)
1817             free_wordlist(opts);
1818         if (addrs != NULL)
1819             free_wordlist(addrs);
1820     }
1821
1822     return 1;
1823 }
1824
1825 /*
1826  * set_allowed_addrs() - set the list of allowed addresses.
1827  * Also looks for `--' indicating options to apply for this peer
1828  * and leaves the following words in extra_options.
1829  */
1830 static void
1831 set_allowed_addrs(unit, addrs, opts)
1832     int unit;
1833     struct wordlist *addrs;
1834     struct wordlist *opts;
1835 {
1836     int n;
1837     struct wordlist *ap, **plink;
1838     struct permitted_ip *ip;
1839     char *ptr_word, *ptr_mask;
1840     struct hostent *hp;
1841     struct netent *np;
1842     u_int32_t a, mask, ah, offset;
1843     struct ipcp_options *wo = &ipcp_wantoptions[unit];
1844     u_int32_t suggested_ip = 0;
1845
1846     if (addresses[unit] != NULL)
1847         free(addresses[unit]);
1848     addresses[unit] = NULL;
1849     if (extra_options != NULL)
1850         free_wordlist(extra_options);
1851     extra_options = opts;
1852
1853     /*
1854      * Count the number of IP addresses given.
1855      */
1856     n = wordlist_count(addrs) + wordlist_count(noauth_addrs);
1857     if (n == 0)
1858         return;
1859     ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip));
1860     if (ip == 0)
1861         return;
1862
1863     /* temporarily append the noauth_addrs list to addrs */
1864     for (plink = &addrs; *plink != NULL; plink = &(*plink)->next)
1865         ;
1866     *plink = noauth_addrs;
1867
1868     n = 0;
1869     for (ap = addrs; ap != NULL; ap = ap->next) {
1870         /* "-" means no addresses authorized, "*" means any address allowed */
1871         ptr_word = ap->word;
1872         if (strcmp(ptr_word, "-") == 0)
1873             break;
1874         if (strcmp(ptr_word, "*") == 0) {
1875             ip[n].permit = 1;
1876             ip[n].base = ip[n].mask = 0;
1877             ++n;
1878             break;
1879         }
1880
1881         ip[n].permit = 1;
1882         if (*ptr_word == '!') {
1883             ip[n].permit = 0;
1884             ++ptr_word;
1885         }
1886
1887         mask = ~ (u_int32_t) 0;
1888         offset = 0;
1889         ptr_mask = strchr (ptr_word, '/');
1890         if (ptr_mask != NULL) {
1891             int bit_count;
1892             char *endp;
1893
1894             bit_count = (int) strtol (ptr_mask+1, &endp, 10);
1895             if (bit_count <= 0 || bit_count > 32) {
1896                 warn("invalid address length %v in auth. address list",
1897                      ptr_mask+1);
1898                 continue;
1899             }
1900             bit_count = 32 - bit_count; /* # bits in host part */
1901             if (*endp == '+') {
1902                 offset = ifunit + 1;
1903                 ++endp;
1904             }
1905             if (*endp != 0) {
1906                 warn("invalid address length syntax: %v", ptr_mask+1);
1907                 continue;
1908             }
1909             *ptr_mask = '\0';
1910             mask <<= bit_count;
1911         }
1912
1913         hp = gethostbyname(ptr_word);
1914         if (hp != NULL && hp->h_addrtype == AF_INET) {
1915             a = *(u_int32_t *)hp->h_addr;
1916         } else {
1917             np = getnetbyname (ptr_word);
1918             if (np != NULL && np->n_addrtype == AF_INET) {
1919                 a = htonl ((u_int32_t)np->n_net);
1920                 if (ptr_mask == NULL) {
1921                     /* calculate appropriate mask for net */
1922                     ah = ntohl(a);
1923                     if (IN_CLASSA(ah))
1924                         mask = IN_CLASSA_NET;
1925                     else if (IN_CLASSB(ah))
1926                         mask = IN_CLASSB_NET;
1927                     else if (IN_CLASSC(ah))
1928                         mask = IN_CLASSC_NET;
1929                 }
1930             } else {
1931                 a = inet_addr (ptr_word);
1932             }
1933         }
1934
1935         if (ptr_mask != NULL)
1936             *ptr_mask = '/';
1937
1938         if (a == (u_int32_t)-1L) {
1939             warn("unknown host %s in auth. address list", ap->word);
1940             continue;
1941         }
1942         if (offset != 0) {
1943             if (offset >= ~mask) {
1944                 warn("interface unit %d too large for subnet %v",
1945                      ifunit, ptr_word);
1946                 continue;
1947             }
1948             a = htonl((ntohl(a) & mask) + offset);
1949             mask = ~(u_int32_t)0;
1950         }
1951         ip[n].mask = htonl(mask);
1952         ip[n].base = a & ip[n].mask;
1953         ++n;
1954         if (~mask == 0 && suggested_ip == 0)
1955             suggested_ip = a;
1956     }
1957     *plink = NULL;
1958
1959     ip[n].permit = 0;           /* make the last entry forbid all addresses */
1960     ip[n].base = 0;             /* to terminate the list */
1961     ip[n].mask = 0;
1962
1963     addresses[unit] = ip;
1964
1965     /*
1966      * If the address given for the peer isn't authorized, or if
1967      * the user hasn't given one, AND there is an authorized address
1968      * which is a single host, then use that if we find one.
1969      */
1970     if (suggested_ip != 0
1971         && (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) {
1972         wo->hisaddr = suggested_ip;
1973         /*
1974          * Do we insist on this address?  No, if there are other
1975          * addresses authorized than the suggested one.
1976          */
1977         if (n > 1)
1978             wo->accept_remote = 1;
1979     }
1980 }
1981
1982 /*
1983  * auth_ip_addr - check whether the peer is authorized to use
1984  * a given IP address.  Returns 1 if authorized, 0 otherwise.
1985  */
1986 int
1987 auth_ip_addr(unit, addr)
1988     int unit;
1989     u_int32_t addr;
1990 {
1991     int ok;
1992
1993     /* don't allow loopback or multicast address */
1994     if (bad_ip_adrs(addr))
1995         return 0;
1996
1997     if (allowed_address_hook) {
1998         ok = allowed_address_hook(addr);
1999         if (ok >= 0) return ok;
2000     }
2001
2002     if (addresses[unit] != NULL) {
2003         ok = ip_addr_check(addr, addresses[unit]);
2004         if (ok >= 0)
2005             return ok;
2006     }
2007
2008     if (auth_required)
2009         return 0;               /* no addresses authorized */
2010     return allow_any_ip || privileged || !have_route_to(addr);
2011 }
2012
2013 static int
2014 ip_addr_check(addr, addrs)
2015     u_int32_t addr;
2016     struct permitted_ip *addrs;
2017 {
2018     for (; ; ++addrs)
2019         if ((addr & addrs->mask) == addrs->base)
2020             return addrs->permit;
2021 }
2022
2023 /*
2024  * bad_ip_adrs - return 1 if the IP address is one we don't want
2025  * to use, such as an address in the loopback net or a multicast address.
2026  * addr is in network byte order.
2027  */
2028 int
2029 bad_ip_adrs(addr)
2030     u_int32_t addr;
2031 {
2032     addr = ntohl(addr);
2033     return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET
2034         || IN_MULTICAST(addr) || IN_BADCLASS(addr);
2035 }
2036
2037 /*
2038  * some_ip_ok - check a wordlist to see if it authorizes any
2039  * IP address(es).
2040  */
2041 static int
2042 some_ip_ok(addrs)
2043     struct wordlist *addrs;
2044 {
2045     for (; addrs != 0; addrs = addrs->next) {
2046         if (addrs->word[0] == '-')
2047             break;
2048         if (addrs->word[0] != '!')
2049             return 1;           /* some IP address is allowed */
2050     }
2051     return 0;
2052 }
2053
2054 /*
2055  * auth_number - check whether the remote number is allowed to connect.
2056  * Returns 1 if authorized, 0 otherwise.
2057  */
2058 int
2059 auth_number()
2060 {
2061     struct wordlist *wp = permitted_numbers;
2062     int l;
2063
2064     /* Allow all if no authorization list. */
2065     if (!wp)
2066         return 1;
2067
2068     /* Allow if we have a match in the authorization list. */
2069     while (wp) {
2070         /* trailing '*' wildcard */
2071         l = strlen(wp->word);
2072         if ((wp->word)[l - 1] == '*')
2073             l--;
2074         if (!strncasecmp(wp->word, remote_number, l))
2075             return 1;
2076         wp = wp->next;
2077     }
2078
2079     return 0;
2080 }
2081
2082 /*
2083  * check_access - complain if a secret file has too-liberal permissions.
2084  */
2085 static void
2086 check_access(f, filename)
2087     FILE *f;
2088     char *filename;
2089 {
2090     struct stat sbuf;
2091
2092     if (fstat(fileno(f), &sbuf) < 0) {
2093         warn("cannot stat secret file %s: %m", filename);
2094     } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) {
2095         warn("Warning - secret file %s has world and/or group access",
2096              filename);
2097     }
2098 }
2099
2100
2101 /*
2102  * scan_authfile - Scan an authorization file for a secret suitable
2103  * for authenticating `client' on `server'.  The return value is -1
2104  * if no secret is found, otherwise >= 0.  The return value has
2105  * NONWILD_CLIENT set if the secret didn't have "*" for the client, and
2106  * NONWILD_SERVER set if the secret didn't have "*" for the server.
2107  * Any following words on the line up to a "--" (i.e. address authorization
2108  * info) are placed in a wordlist and returned in *addrs.  Any
2109  * following words (extra options) are placed in a wordlist and
2110  * returned in *opts.
2111  * We assume secret is NULL or points to MAXWORDLEN bytes of space.
2112  * Flags are non-zero if we need two colons in the secret in order to
2113  * match.
2114  */
2115 static int
2116 scan_authfile(f, client, server, secret, addrs, opts, filename, flags)
2117     FILE *f;
2118     char *client;
2119     char *server;
2120     char *secret;
2121     struct wordlist **addrs;
2122     struct wordlist **opts;
2123     char *filename;
2124     int flags;
2125 {
2126     int newline, xxx;
2127     int got_flag, best_flag;
2128     FILE *sf;
2129     struct wordlist *ap, *addr_list, *alist, **app;
2130     char word[MAXWORDLEN];
2131     char atfile[MAXWORDLEN];
2132     char lsecret[MAXWORDLEN];
2133     char *cp;
2134
2135     if (addrs != NULL)
2136         *addrs = NULL;
2137     if (opts != NULL)
2138         *opts = NULL;
2139     addr_list = NULL;
2140     if (!getword(f, word, &newline, filename))
2141         return -1;              /* file is empty??? */
2142     newline = 1;
2143     best_flag = -1;
2144     for (;;) {
2145         /*
2146          * Skip until we find a word at the start of a line.
2147          */
2148         while (!newline && getword(f, word, &newline, filename))
2149             ;
2150         if (!newline)
2151             break;              /* got to end of file */
2152
2153         /*
2154          * Got a client - check if it's a match or a wildcard.
2155          */
2156         got_flag = 0;
2157         if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) {
2158             newline = 0;
2159             continue;
2160         }
2161         if (!ISWILD(word))
2162             got_flag = NONWILD_CLIENT;
2163
2164         /*
2165          * Now get a server and check if it matches.
2166          */
2167         if (!getword(f, word, &newline, filename))
2168             break;
2169         if (newline)
2170             continue;
2171         if (!ISWILD(word)) {
2172             if (server != NULL && strcmp(word, server) != 0)
2173                 continue;
2174             got_flag |= NONWILD_SERVER;
2175         }
2176
2177         /*
2178          * Got some sort of a match - see if it's better than what
2179          * we have already.
2180          */
2181         if (got_flag <= best_flag)
2182             continue;
2183
2184         /*
2185          * Get the secret.
2186          */
2187         if (!getword(f, word, &newline, filename))
2188             break;
2189         if (newline)
2190             continue;
2191
2192         /*
2193          * SRP-SHA1 authenticator should never be reading secrets from
2194          * a file.  (Authenticatee may, though.)
2195          */
2196         if (flags && ((cp = strchr(word, ':')) == NULL ||
2197             strchr(cp + 1, ':') == NULL))
2198             continue;
2199
2200         if (secret != NULL) {
2201             /*
2202              * Special syntax: @/pathname means read secret from file.
2203              */
2204             if (word[0] == '@' && word[1] == '/') {
2205                 strlcpy(atfile, word+1, sizeof(atfile));
2206                 if ((sf = fopen(atfile, "r")) == NULL) {
2207                     warn("can't open indirect secret file %s", atfile);
2208                     continue;
2209                 }
2210                 check_access(sf, atfile);
2211                 if (!getword(sf, word, &xxx, atfile)) {
2212                     warn("no secret in indirect secret file %s", atfile);
2213                     fclose(sf);
2214                     continue;
2215                 }
2216                 fclose(sf);
2217             }
2218             strlcpy(lsecret, word, sizeof(lsecret));
2219         }
2220
2221         /*
2222          * Now read address authorization info and make a wordlist.
2223          */
2224         app = &alist;
2225         for (;;) {
2226             if (!getword(f, word, &newline, filename) || newline)
2227                 break;
2228             ap = (struct wordlist *)
2229                     malloc(sizeof(struct wordlist) + strlen(word) + 1);
2230             if (ap == NULL)
2231                 novm("authorized addresses");
2232             ap->word = (char *) (ap + 1);
2233             strcpy(ap->word, word);
2234             *app = ap;
2235             app = &ap->next;
2236         }
2237         *app = NULL;
2238
2239         /*
2240          * This is the best so far; remember it.
2241          */
2242         best_flag = got_flag;
2243         if (addr_list)
2244             free_wordlist(addr_list);
2245         addr_list = alist;
2246         if (secret != NULL)
2247             strlcpy(secret, lsecret, MAXWORDLEN);
2248
2249         if (!newline)
2250             break;
2251     }
2252
2253     /* scan for a -- word indicating the start of options */
2254     for (app = &addr_list; (ap = *app) != NULL; app = &ap->next)
2255         if (strcmp(ap->word, "--") == 0)
2256             break;
2257     /* ap = start of options */
2258     if (ap != NULL) {
2259         ap = ap->next;          /* first option */
2260         free(*app);                     /* free the "--" word */
2261         *app = NULL;            /* terminate addr list */
2262     }
2263     if (opts != NULL)
2264         *opts = ap;
2265     else if (ap != NULL)
2266         free_wordlist(ap);
2267     if (addrs != NULL)
2268         *addrs = addr_list;
2269     else if (addr_list != NULL)
2270         free_wordlist(addr_list);
2271
2272     return best_flag;
2273 }
2274
2275 /*
2276  * wordlist_count - return the number of items in a wordlist
2277  */
2278 static int
2279 wordlist_count(wp)
2280     struct wordlist *wp;
2281 {
2282     int n;
2283
2284     for (n = 0; wp != NULL; wp = wp->next)
2285         ++n;
2286     return n;
2287 }
2288
2289 /*
2290  * free_wordlist - release memory allocated for a wordlist.
2291  */
2292 static void
2293 free_wordlist(wp)
2294     struct wordlist *wp;
2295 {
2296     struct wordlist *next;
2297
2298     while (wp != NULL) {
2299         next = wp->next;
2300         free(wp);
2301         wp = next;
2302     }
2303 }
2304
2305 /*
2306  * auth_script_done - called when the auth-up or auth-down script
2307  * has finished.
2308  */
2309 static void
2310 auth_script_done(arg)
2311     void *arg;
2312 {
2313     auth_script_pid = 0;
2314     switch (auth_script_state) {
2315     case s_up:
2316         if (auth_state == s_down) {
2317             auth_script_state = s_down;
2318             auth_script(_PATH_AUTHDOWN);
2319         }
2320         break;
2321     case s_down:
2322         if (auth_state == s_up) {
2323             auth_script_state = s_up;
2324             auth_script(_PATH_AUTHUP);
2325         }
2326         break;
2327     }
2328 }
2329
2330 /*
2331  * auth_script - execute a script with arguments
2332  * interface-name peer-name real-user tty speed
2333  */
2334 static void
2335 auth_script(script)
2336     char *script;
2337 {
2338     char strspeed[32];
2339     struct passwd *pw;
2340     char struid[32];
2341     char *user_name;
2342     char *argv[8];
2343
2344     if ((pw = getpwuid(getuid())) != NULL && pw->pw_name != NULL)
2345         user_name = pw->pw_name;
2346     else {
2347         slprintf(struid, sizeof(struid), "%d", getuid());
2348         user_name = struid;
2349     }
2350     slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
2351
2352     argv[0] = script;
2353     argv[1] = ifname;
2354     argv[2] = peer_authname;
2355     argv[3] = user_name;
2356     argv[4] = devnam;
2357     argv[5] = strspeed;
2358     argv[6] = NULL;
2359
2360     auth_script_pid = run_program(script, argv, 0, auth_script_done, NULL, 0);
2361 }