From: Jeremy Kerr <jk@ozlabs.org>
Date: Sun, 19 Nov 2006 12:20:39 +0000 (+1100)
Subject: Add configuration files for powerpc and cell
X-Git-Url: https://git.ozlabs.org/?p=bitfield;a=commitdiff_plain;h=86b91ff2b9b81bdcaa20e48a1923f0febfeacdf6;ds=sidebyside

Add configuration files for powerpc and cell

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---

diff --git a/conf/cell.conf b/conf/cell.conf
new file mode 100644
index 0000000..d6261fe
--- /dev/null
+++ b/conf/cell.conf
@@ -0,0 +1,108 @@
+; Definitions for the Cell Broadband Engine
+;
+; Contributors:
+;  Jeremy Kerr <jk@ozlabs.org>
+
+[IOC_IOST_Origin]
+name:	Cell IOMMU Segmentation Table Origin
+width:	64
+field:	0	Enable
+field:	22:51	IOST origin
+field:	52	HW
+field:	53	HL
+
+[IOC_IO_ExcpStat]
+name:	Cell I/O Exception Status Register
+width:	64
+field:	0	Valid
+field:	1:2	Segment/Page Fault
+value:		0 none
+value:		1 page fault
+value:		2 undefined
+value:		3 segment fault
+field:	29:51	Address
+field:	52	RW
+value:		0 write
+value:		1 read
+field:	53:63	IOID
+
+[IOC_IOCmd_Cfg]
+name:	Cell IOCmd Configuration
+field:	0:15	IOC Timeout
+field:	16	TE
+field:	17	Enable tokens
+field:	18	Read-modify-write
+field:	19	SXT
+field:	20	Node ID 0
+field:	21:31	IOID0
+field:	32:34	CVCID0
+filed:	35	IR0
+field:	36	E0
+field:	37	Node ID 1
+field:	38:48	IOID1
+field:	49:51	CVCID1
+filed:	52	IR1
+field:	53	E1
+field:	54:57	Starvation count 1
+field:	58	AAR
+field:	59	AAA
+field:	60	Disable ageing
+field:	61	Read intervention
+
+
+[IOC_STE]
+name: Cell IOMMU Segmentation Table Entry
+field:	0	Valid
+field:	1	Hint
+field:	2:51	IOPT Base RPN
+field:	52:58	NPPT
+field:	60:63	Page size
+
+[IOC_PTE]
+name: Cell IOMMU Page Table Entry
+field:	0:1	Page protection
+value:          0 no access
+value:          1 read
+value:          2 write
+value:          3 read & write
+field:	2	Coherence required
+field:	3:4	Storage ordering
+value:          0 none
+value:          1 reserved
+value:          2 writes
+value:          3 reads & writes
+field:	5:51	RPN
+field:	52:63	IOID
+
+[IOC_IOPT_CacheInvd]
+name: Cell IOC IOPT Cache Invalidate
+field:	0:10	Number of entries
+field:	22:60	IOPTE real address
+field:	63	Busy
+
+[SPU_Status]
+name: Cell SPU Status
+width: 32
+field:	0:15	Stop-and-signal status
+field:	21	Isolate exit
+field:	22	Isolate load
+field:	24	Isolated mode
+field:	26	Stopped: invalid instruction
+field:	27	Stopped: single-step mode
+field:	28	Waiting on blocked channel
+field:	29	Stopped: halt instruction
+field:	30	Stopped: stop-and-signal
+field:	31	Running
+
+[MFC_SR1]
+name:	Cell MFC State Register 1
+width:	64
+field:	57	Software/hardware page tables
+field:	58	Master run control
+value:		0 Stopped
+value:		1 Running
+field:	59	MFC Translation
+field:	60	Problem state
+field:	62	Bus tlbie
+field:	63	Local store real address
+
diff --git a/conf/powerpc.conf b/conf/powerpc.conf
new file mode 100644
index 0000000..c3268a1
--- /dev/null
+++ b/conf/powerpc.conf
@@ -0,0 +1,56 @@
+; Definitions for the PowerPC architecture
+;
+; Contributors:
+;  Michael Neuling <mikey@neuling.org>
+
+[MSR]
+name: PowerPC Machine State Register
+field:  0 64-bit mode (SF)
+value:		0 32-bit mode
+value:		1 64-bit mode
+field:  3 Hypervisor State (HV)
+field: 48 External Interrupt Enable (EE)
+field: 49 Problem State (PR)
+value:  0 privileged state
+value:  1 problem state
+field: 50 Floating-Point Available (FP)
+field: 51 Machine Check Interrupt Enable (ME)
+field: 52,55 Floating-Point Exception Mode (FE)
+value:          0 ignore exceptions
+value:          1 imprecise nonrecoverable
+value:          2 imprecise recoverable
+value:          3 precise
+field: 53 Single-Step Trace Enable (SE)
+field: 54 Branch Trace Enable (BE)
+field: 58 Instruction Relocate (IR)
+field: 59 Data Relocate (DR)
+field: 61 Performance Monitor Mark (PMM)
+field: 62 Recoverable Interrupt (RI)
+field: 63 Little-Endian Mode (LE)
+value:		0 big-endian
+value:		1 little-endian
+
+[SLB_E]
+name: PowerPC SLB ESID Entry
+field: 0:35  Effective segment ID (ESID)
+field: 36    Valid (V)
+field: 52:63 Index
+
+[SLB_V]
+name: PowerPC SLB VSID Entry
+field: 0:1  Segment size selector (B)
+value:		0 256MB
+value:		1 1TB
+value:		2 reserved
+value:		3 reserved
+field: 2:51 Virtual segment ID (VSID)
+field: 52   Supervisor state storage key (Ks)
+field: 53   Problem state storage key (Kp)
+field: 55,58,59 Virtual page size selector
+value:		0 4KB (Unless PTE specifies 64KB) (MPS)
+value:		5 64KB (Provided PTE specifies 64KB) (MPS)
+field: 54   No-execute segment (N)
+field: 56   Class (C)
+value:		0 big-endian
+value:		1 little-endian
+