X-Git-Url: https://git.ozlabs.org/?a=blobdiff_plain;f=pppd%2Fpppd.8;h=f70e05389c29ff89ae0635d8d8d80c66bdbfb997;hb=1e79371ec6feb288d4f72b1380332009cfa3dc0f;hp=7417a36ed2632ae4172a2776b1c4d574c62f8d2e;hpb=92c5612fdb77e83e49c524ae46110c129e13429e;p=ppp.git

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 7417a36..f70e053 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -536,6 +536,19 @@ With this option, pppd will accept the peer's idea of its (remote)
 IPv6 interface identifier, even if the remote IPv6 interface
 identifier was specified in an option.
 .TP
+.B ipv6cp\-noremote
+Allow pppd to operate without having an IPv6 link local address for the peer.
+This option is only available under Linux.  Normally, pppd will request the
+peer's IPv6 interface identifier (used for composing IPv6 link local address),
+and if the peer does not supply it, pppd will generate one for the peer.
+With this option, if the peer does not supply its IPv6 interface identifier,
+pppd will not ask the peer for it, and will not set the destination IPv6
+link local address of the ppp interface.  In this situation, the ppp interface
+can be used for routing by creating device routes, but the peer itself cannot
+be addressed directly for IPv6 traffic until the peer starts announcing ICMPv6
+Router Advertisement or ICMPv6 Neighbor Advertisement packets.  Note that IPv6
+router must announce ICMPv6 Router Advertisement packets.
+.TP
 .B ipv6cp\-max\-configure \fIn
 Set the maximum number of IPv6CP configure-request transmissions to
 \fIn\fR (default 10).
@@ -1294,8 +1307,9 @@ Attach to existing PPPoE session. For backward compatibility also
 \fBrp_pppoe_sess\fP option name is supported.
 .TP
 .B pppoe-verbose \fIn
-Be verbose about discovered access concentrators. For backward
-compatibility also \fBrp_pppoe_verbose\fP option name is supported.
+Be verbose about discovered access concentrators. When set to 2 or bigger
+value then dump also discovery packets. For backward compatibility also
+\fBrp_pppoe_verbose\fP option name is supported.
 .TP
 .B pppoe-mac \fImacaddr
 Connect to specified MAC address.