X-Git-Url: https://git.ozlabs.org/?a=blobdiff_plain;f=pppd%2Fpppd.8;h=cd4b9eba3a49ceb5bd87eaea702500b864f9552f;hb=4e2c49755175d05f7f4a3c1c70a42d2eef9d7839;hp=3b7c28835cd9b87c5a3051029e7b28fbc8d296fc;hpb=5e2835a1e6f3c65aabc6c5d46858d76e9b464758;p=ppp.git

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 3b7c288..cd4b9eb 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -55,8 +55,8 @@ non-privileged user.
 .I speed
 An option that is a decimal number is taken as the desired baud rate
 for the serial device.  On systems such as
-4.4BSD and NetBSD, any speed can be specified.  Other systems
-(e.g. Linux, SunOS) only support the commonly-used baud rates.
+Linux, 4.4BSD and NetBSD, any speed can be specified.  Other systems
+(e.g. SunOS) only support the commonly-used baud rates.
 .TP
 .B asyncmap \fImap
 This option sets the Async-Control-Character-Map (ACCM) for this end
@@ -127,11 +127,10 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
+.B replacedefaultroute
+This option is a flag to the defaultroute option. If defaultroute is
+set and this flag is also set, pppd replaces an existing default route
+with the new default route.  This option is privileged.
 .TP
 .B disconnect \fIscript
 Execute the command specified by \fIscript\fR, by passing it to a
@@ -298,6 +297,12 @@ to \fIn\fR seconds (default 3).
 .B chap-timeout \fIn
 Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
 .TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit
@@ -343,6 +348,17 @@ Disable MRU [Maximum Receive Unit] negotiation.  With this option,
 pppd will use the default MRU value of 1500 bytes for both the
 transmit and receive direction.
 .TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR.  IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets.  This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP
 .B deflate \fInr,nt
 Request that the peer compress packets that it sends, using the
 Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
@@ -482,6 +498,18 @@ to send configure-Rejects instead to \fIn\fR (default 10).
 Set the maximum number of IPCP terminate-request transmissions to
 \fIn\fR (default 3).
 .TP
+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP
 .B ipcp\-restart \fIn
 Set the IPCP restart interval (retransmission timeout) to \fIn\fR
 seconds (default 3).
@@ -792,9 +820,13 @@ disable both forms of hardware flow control.
 .TP
 .B nodefaultroute
 Disable the \fIdefaultroute\fR option.  The system administrator who
-wishes to prevent users from creating default routes with pppd
+wishes to prevent users from adding a default route with pppd
 can do so by placing this option in the /etc/ppp/options file.
 .TP
+.B noreplacedefaultroute
+Disable the \fIreplacedefaultroute\fR option. This allows to disable a
+\fIreplacedefaultroute\fR option set previously in the configuration.
+.TP
 .B nodefaultroute6
 Disable the \fIdefaultroute6\fR option.  The system administrator who
 wishes to prevent users from adding a default route with pppd
@@ -909,6 +941,9 @@ situation, the ppp interface can be used for routing by creating
 device routes, but the peer itself cannot be addressed directly for IP
 traffic.
 .TP
+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP
 .B notty
 Normally, pppd requires a terminal device.  With this option, pppd
 will allocate itself a pseudo-tty master/slave pair and use the slave
@@ -1735,6 +1770,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.