X-Git-Url: https://git.ozlabs.org/?a=blobdiff_plain;f=pppd%2Fpppd.8;h=95051bf028c0885e8e3b3842c9f0dc355f89a40d;hb=a4781b380161f44032af5442c0c12dc68413504c;hp=bb7e2ff1d80732263c6ce2ca33c679ba0f064970;hpb=d0ccb87156c295da4f679f35936a976cea46d38c;p=ppp.git

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index bb7e2ff..95051bf 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -127,12 +127,6 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
-.TP
 .B replacedefaultroute
 This option is a flag to the defaultroute option. If defaultroute is
 set and this flag is also set, pppd replaces an existing default route
@@ -303,6 +297,12 @@ to \fIn\fR seconds (default 3).
 .B chap-timeout \fIn
 Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
 .TP
+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP
 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit
@@ -348,6 +348,17 @@ Disable MRU [Maximum Receive Unit] negotiation.  With this option,
 pppd will use the default MRU value of 1500 bytes for both the
 transmit and receive direction.
 .TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR.  IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets.  This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP
 .B deflate \fInr,nt
 Request that the peer compress packets that it sends, using the
 Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
@@ -487,6 +498,18 @@ to send configure-Rejects instead to \fIn\fR (default 10).
 Set the maximum number of IPCP terminate-request transmissions to
 \fIn\fR (default 3).
 .TP
+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP
 .B ipcp\-restart \fIn
 Set the IPCP restart interval (retransmission timeout) to \fIn\fR
 seconds (default 3).
@@ -918,6 +941,9 @@ situation, the ppp interface can be used for routing by creating
 device routes, but the peer itself cannot be addressed directly for IP
 traffic.
 .TP
+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP
 .B notty
 Normally, pppd requires a terminal device.  With this option, pppd
 will allocate itself a pseudo-tty master/slave pair and use the slave
@@ -1744,6 +1770,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.