X-Git-Url: https://git.ozlabs.org/?a=blobdiff_plain;f=pppd%2Fpppd.8;h=846b862fcd7fd619e124a523cdfd962b47027945;hb=431469a02ce74e5fe4b9943e86b9bfc272882fcb;hp=f8c6fb9186066c7a06f2fa1d3ccb95bd8fb1d06f;hpb=9463ee80e45bc2b75969826e1c616ca6a619b49b;p=ppp.git

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index f8c6fb9..846b862 100644
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -260,6 +260,12 @@ Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
 compression in the corresponding direction.  Use \fInobsdcomp\fR or
 \fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
 .TP
+.B ca \fIca-file
+(EAP-TLS) Use the file \fIca-file\fR as the X.509 Certificate Authority
+(CA) file (in PEM format), needed for setting up an EAP-TLS connection.
+This option is used on the client-side in conjunction with the \fBcert\fR
+and \fBkey\fR options.
+.TP
 .B cdtrcts
 Use a non-standard hardware flow control (i.e. DTR/CTS) to control
 the flow of data on the serial port.  If neither the \fIcrtscts\fR,
@@ -271,6 +277,12 @@ RTS output. Such serial ports use this mode to implement true
 bi-directional flow control. The sacrifice is that this flow
 control mode does not permit using DTR as a modem control line.
 .TP
+.B cert \fIcertfile
+(EAP-TLS) Use the file \fIcertfile\fR as the X.509 certificate (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and 
+\fBkey\fR options.
+.TP
 .B chap\-interval \fIn
 If this option is given, pppd will rechallenge the peer every \fIn\fR
 seconds.
@@ -283,6 +295,9 @@ Set the maximum number of CHAP challenge transmissions to \fIn\fR
 Set the CHAP restart interval (retransmission timeout for challenges)
 to \fIn\fR seconds (default 3).
 .TP
+.B chap-timeout \fIn
+Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
+.TP
 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit
@@ -299,6 +314,18 @@ negotiation by sending its first LCP packet.  The default value is
 1000 (1 second).  This wait period only applies if the \fBconnect\fR
 or \fBpty\fR option is used.
 .TP
+.B crl \fIfilename
+(EAP-TLS) Use the file \fIfilename\fR as the Certificate Revocation List
+to check for the validity of the peer's certificate. This option is not
+mandatory for setting up an EAP-TLS connection. Also see the \fBcrl-dir\fR
+option.
+.TP
+.B crl-dir \fIdirectory
+(EAP-TLS) Use the directory \fIdirectory\fR to scan for CRL files in
+has format ($hash.r0) to check for the validity of the peer's certificate.
+This option is not mandatory for setting up an EAP-TLS connection.
+Also see the \fBcrl\fR option.
+.TP
 .B debug
 Enables connection debugging facilities.
 If this option is given, pppd will log the contents of all
@@ -470,6 +497,11 @@ With this option, pppd will accept the peer's idea of our local IPv6
 interface identifier, even if the local IPv6 interface identifier
 was specified in an option.
 .TP
+.B ipv6cp\-accept\-remote
+With this option, pppd will accept the peer's idea of its (remote)
+IPv6 interface identifier, even if the remote IPv6 interface
+identifier was specified in an option.
+.TP
 .B ipv6cp\-max\-configure \fIn
 Set the maximum number of IPv6CP configure-request transmissions to
 \fIn\fR (default 10).
@@ -563,6 +595,12 @@ transmitted packets be printed.  On most systems, messages printed by
 the kernel are logged by syslog(1) to a file as directed in the
 /etc/syslog.conf configuration file.
 .TP
+.B key \fIkeyfile
+(EAP-TLS) Use the file \fIkeyfile\fR as the private key file (in PEM
+format), needed for setting up an EAP-TLS connection. This option is
+used on the client-side in conjunction with the \fBca\fR and 
+\fBcert\fR options.
+.TP
 .B ktune
 Enables pppd to alter kernel settings as appropriate.  Under Linux,
 pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
@@ -726,6 +764,9 @@ name to \fIname\fR.)
 Disable Address/Control compression in both directions (send and
 receive).
 .TP
+.B need-peer-eap
+(EAP-TLS) Require the peer to verify our authentication credentials.
+.TP
 .B noauth
 Do not require the peer to authenticate itself.  This option is
 privileged.
@@ -1087,6 +1128,10 @@ When operating as an EAP SRP\-SHA1 client, attempt to use the pseudonym
 stored in ~/.ppp_pseudonym first as the identity, and save in this
 file any pseudonym offered by the peer during authentication.
 .TP
+.B stop\-bits \fIn
+Set the number of stop bits for the serial port. Valid values are 1 or 2.
+The default value is 1.
+.TP
 .B sync
 Use synchronous HDLC serial encoding instead of asynchronous.
 The device used by pppd with this option must have sync support.