* OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <string.h>
#include <time.h>
#include <memory.h>
+#ifdef HAVE_UTMP_H
#include <utmp.h>
+#endif
#include <mntent.h>
#include <signal.h>
#include <fcntl.h>
#if !defined(__GLIBC__) || __GLIBC__ >= 2
#include <asm/types.h> /* glibc 2 conflicts with linux/types.h */
+#include <asm/ioctls.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/route.h>
#include <linux/ppp_defs.h>
#include <linux/if_ppp.h>
+#ifdef INET6
+#include <linux/netlink.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_addr.h>
+/* glibc versions prior to 2.24 do not define SOL_NETLINK */
+#ifndef SOL_NETLINK
+#define SOL_NETLINK 270
+#endif
+/* linux kernel versions prior to 4.3 do not define/support NETLINK_CAP_ACK */
+#ifndef NETLINK_CAP_ACK
+#define NETLINK_CAP_ACK 10
+#endif
+#endif
+
#include "pppd.h"
#include "fsm.h"
#include "ipcp.h"
#include <sys/locks.h>
#endif
+#ifndef BOTHER
+#define BOTHER 0010000
+#endif
+struct termios2 {
+ unsigned int c_iflag;
+ unsigned int c_oflag;
+ unsigned int c_cflag;
+ unsigned int c_lflag;
+ unsigned char c_line;
+ unsigned char c_cc[19];
+ unsigned int c_ispeed;
+ unsigned int c_ospeed;
+};
+
#ifdef INET6
#ifndef _LINUX_IN6_H
/*
#endif
#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do { \
- memset(&sin6.s6_addr, 0, sizeof(struct in6_addr)); \
- sin6.s6_addr16[0] = htons(0xfe80); \
- eui64_copy(eui64, sin6.s6_addr32[2]); \
+ memset(&(sin6).s6_addr, 0, sizeof(struct in6_addr)); \
+ (sin6).s6_addr16[0] = htons(0xfe80); \
+ eui64_copy(eui64, (sin6).s6_addr32[2]); \
} while (0)
static const eui64_t nulleui64;
#ifdef B460800
{ 460800, B460800 },
#endif
+#ifdef B500000
+ { 500000, B500000 },
+#endif
+#ifdef B576000
+ { 576000, B576000 },
+#endif
#ifdef B921600
{ 921600, B921600 },
#endif
if (bps == speedp->speed_int)
return speedp->speed_val;
}
- warn("speed %d not supported", bps);
}
return 0;
}
if (stop_bits >= 2)
tios.c_cflag |= CSTOPB;
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed (&tios, speed);
- cfsetispeed (&tios, speed);
+ if (inspeed) {
+ speed = translate_speed(inspeed);
+ if (speed) {
+ cfsetospeed (&tios, speed);
+ cfsetispeed (&tios, speed);
+ speed = cfgetospeed(&tios);
+ }
+ baud_rate = baud_rate_of(speed);
}
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
else {
speed = cfgetospeed(&tios);
- if (speed == B0)
- fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
+ baud_rate = baud_rate_of(speed);
}
while (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0 && !ok_error(errno))
if (errno != EINTR)
fatal("tcsetattr: %m (line %d)", __LINE__);
-
- baud_rate = baud_rate_of(speed);
restore_term = 1;
+
+/* Most Linux architectures and drivers support arbitrary baud rate values via BOTHER */
+#ifdef TCGETS2
+ if (!baud_rate) {
+ struct termios2 tios2;
+ if (ioctl(tty_fd, TCGETS2, &tios2) == 0) {
+ if (inspeed) {
+ tios2.c_cflag &= ~CBAUD;
+ tios2.c_cflag |= BOTHER;
+ tios2.c_ispeed = inspeed;
+ tios2.c_ospeed = inspeed;
+#ifdef TCSETS2
+ if (ioctl(tty_fd, TCSETS2, &tios2) == 0)
+ baud_rate = inspeed;
+#endif
+ } else {
+ if ((tios2.c_cflag & CBAUD) == BOTHER && tios2.c_ospeed)
+ baud_rate = tios2.c_ospeed;
+ }
+ }
+ }
+#endif
+
+/*
+ * We can't proceed if the serial port baud rate is unknown,
+ * since that implies that the serial port is disabled.
+ */
+ if (!baud_rate) {
+ if (inspeed)
+ fatal("speed %d not supported", inspeed);
+ else
+ fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
+ }
}
/********************************************************************
}
#ifdef INET6
+/********************************************************************
+ *
+ * sif6addr_rtnetlink - Config the interface with both IPv6 link-local addresses via rtnetlink
+ */
+static int sif6addr_rtnetlink(unsigned int iface, eui64_t our_eui64, eui64_t his_eui64)
+{
+ struct {
+ struct nlmsghdr nlh;
+ struct ifaddrmsg ifa;
+ struct {
+ struct rtattr rta;
+ struct in6_addr addr;
+ } addrs[2];
+ } nlreq;
+ struct {
+ struct nlmsghdr nlh;
+ struct nlmsgerr nlerr;
+ } nlresp;
+ struct sockaddr_nl nladdr;
+ struct iovec iov;
+ struct msghdr msg;
+ ssize_t nlresplen;
+ int one;
+ int fd;
+
+ fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
+ if (fd < 0) {
+ error("sif6addr_rtnetlink: socket(NETLINK_ROUTE): %m (line %d)", __LINE__);
+ return 0;
+ }
+
+ /*
+ * Tell kernel to not send to us payload of acknowledgment error message.
+ * NETLINK_CAP_ACK option is supported since Linux kernel version 4.3 and
+ * older kernel versions always send full payload in acknowledgment netlink
+ * message. We ignore payload of this message as we need only error code,
+ * to check if our set remote peer address request succeeded or failed.
+ * So ignore return value from the following setsockopt() call as setting
+ * option NETLINK_CAP_ACK means for us just a kernel hint / optimization.
+ */
+ one = 1;
+ setsockopt(fd, SOL_NETLINK, NETLINK_CAP_ACK, &one, sizeof(one));
+
+ memset(&nladdr, 0, sizeof(nladdr));
+ nladdr.nl_family = AF_NETLINK;
+
+ if (bind(fd, (struct sockaddr *)&nladdr, sizeof(nladdr)) < 0) {
+ error("sif6addr_rtnetlink: bind(AF_NETLINK): %m (line %d)", __LINE__);
+ close(fd);
+ return 0;
+ }
+
+ memset(&nlreq, 0, sizeof(nlreq));
+ nlreq.nlh.nlmsg_len = sizeof(nlreq);
+ nlreq.nlh.nlmsg_type = RTM_NEWADDR;
+ nlreq.nlh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_EXCL | NLM_F_CREATE;
+ nlreq.ifa.ifa_family = AF_INET6;
+ nlreq.ifa.ifa_prefixlen = 128;
+ nlreq.ifa.ifa_flags = IFA_F_NODAD | IFA_F_PERMANENT;
+ nlreq.ifa.ifa_scope = RT_SCOPE_LINK;
+ nlreq.ifa.ifa_index = iface;
+ nlreq.addrs[0].rta.rta_len = sizeof(nlreq.addrs[0]);
+ nlreq.addrs[0].rta.rta_type = IFA_LOCAL;
+ IN6_LLADDR_FROM_EUI64(nlreq.addrs[0].addr, our_eui64);
+ nlreq.addrs[1].rta.rta_len = sizeof(nlreq.addrs[1]);
+ nlreq.addrs[1].rta.rta_type = IFA_ADDRESS;
+ IN6_LLADDR_FROM_EUI64(nlreq.addrs[1].addr, his_eui64);
+
+ memset(&nladdr, 0, sizeof(nladdr));
+ nladdr.nl_family = AF_NETLINK;
+
+ memset(&iov, 0, sizeof(iov));
+ iov.iov_base = &nlreq;
+ iov.iov_len = sizeof(nlreq);
+
+ memset(&msg, 0, sizeof(msg));
+ msg.msg_name = &nladdr;
+ msg.msg_namelen = sizeof(nladdr);
+ msg.msg_iov = &iov;
+ msg.msg_iovlen = 1;
+
+ if (sendmsg(fd, &msg, 0) < 0) {
+ error("sif6addr_rtnetlink: sendmsg(RTM_NEWADDR/NLM_F_CREATE): %m (line %d)", __LINE__);
+ close(fd);
+ return 0;
+ }
+
+ memset(&iov, 0, sizeof(iov));
+ iov.iov_base = &nlresp;
+ iov.iov_len = sizeof(nlresp);
+
+ memset(&msg, 0, sizeof(msg));
+ msg.msg_name = &nladdr;
+ msg.msg_namelen = sizeof(nladdr);
+ msg.msg_iov = &iov;
+ msg.msg_iovlen = 1;
+
+ nlresplen = recvmsg(fd, &msg, 0);
+
+ if (nlresplen < 0) {
+ error("sif6addr_rtnetlink: recvmsg(NLM_F_ACK): %m (line %d)", __LINE__);
+ close(fd);
+ return 0;
+ }
+
+ close(fd);
+
+ if (nladdr.nl_family != AF_NETLINK) {
+ error("sif6addr_rtnetlink: recvmsg(NLM_F_ACK): Not a netlink packet (line %d)", __LINE__);
+ return 0;
+ }
+
+ if ((size_t)nlresplen != sizeof(nlresp) || nlresp.nlh.nlmsg_len < sizeof(nlresp)) {
+ error("sif6addr_rtnetlink: recvmsg(NLM_F_ACK): Acknowledgment netlink packet too short (line %d)", __LINE__);
+ return 0;
+ }
+
+ /* acknowledgment packet for NLM_F_ACK is NLMSG_ERROR */
+ if (nlresp.nlh.nlmsg_type != NLMSG_ERROR) {
+ error("sif6addr_rtnetlink: recvmsg(NLM_F_ACK): Not an acknowledgment netlink packet (line %d)", __LINE__);
+ return 0;
+ }
+
+ /* error == 0 indicates success, negative value is errno code */
+ if (nlresp.nlerr.error != 0) {
+ error("sif6addr_rtnetlink: %s (line %d)", strerror(-nlresp.nlerr.error), __LINE__);
+ return 0;
+ }
+
+ return 1;
+}
+
/********************************************************************
*
* sif6addr - Config the interface with an IPv6 link-local address
return 0;
}
- /* Local interface */
- memset(&ifr6, 0, sizeof(ifr6));
- IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
- ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- ifr6.ifr6_prefixlen = 128;
-
- if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
- error("sif6addr: ioctl(SIOCSIFADDR): %m (line %d)", __LINE__);
- return 0;
- }
-
- /* Route to remote host */
- memset(&rt6, 0, sizeof(rt6));
- IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
- rt6.rtmsg_flags = RTF_UP;
- rt6.rtmsg_dst_len = 128;
- rt6.rtmsg_ifindex = ifr.ifr_ifindex;
- rt6.rtmsg_metric = 1;
-
- if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
- error("sif6addr: ioctl(SIOCADDRT): %m (line %d)", __LINE__);
- return 0;
+ if (kernel_version >= KVERSION(2,1,16)) {
+ /* Set both local address and remote peer address (with route for it) via rtnetlink */
+ return sif6addr_rtnetlink(ifr.ifr_ifindex, our_eui64, his_eui64);
+ } else {
+ /* Local interface */
+ memset(&ifr6, 0, sizeof(ifr6));
+ IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
+ ifr6.ifr6_ifindex = ifr.ifr_ifindex;
+ ifr6.ifr6_prefixlen = 128;
+
+ if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
+ error("sif6addr: ioctl(SIOCSIFADDR): %m (line %d)", __LINE__);
+ return 0;
+ }
+
+ /*
+ * Linux kernel does not provide AF_INET6 ioctl SIOCSIFDSTADDR for
+ * setting remote peer host address, so set only route to remote host.
+ */
+
+ /* Route to remote host */
+ memset(&rt6, 0, sizeof(rt6));
+ IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
+ rt6.rtmsg_flags = RTF_UP;
+ rt6.rtmsg_dst_len = 128;
+ rt6.rtmsg_ifindex = ifr.ifr_ifindex;
+ rt6.rtmsg_metric = 1;
+
+ if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
+ error("sif6addr: ioctl(SIOCADDRT): %m (line %d)", __LINE__);
+ return 0;
+ }
}
return 1;