.I speed
An option that is a decimal number is taken as the desired baud rate
for the serial device. On systems such as
-4.4BSD and NetBSD, any speed can be specified. Other systems
-(e.g. Linux, SunOS) only support the commonly-used baud rates.
+Linux, 4.4BSD and NetBSD, any speed can be specified. Other systems
+(e.g. SunOS) only support the commonly-used baud rates.
.TP
.B asyncmap \fImap
This option sets the Async-Control-Character-Map (ACCM) for this end
value of -1, the route is only added if there is no default route at
all.
.TP
-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken. This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
-.TP
.B replacedefaultroute
This option is a flag to the defaultroute option. If defaultroute is
set and this flag is also set, pppd replaces an existing default route
pppd will use the default MRU value of 1500 bytes for both the
transmit and receive direction.
.TP
+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken. This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR. IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets. This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP
.B deflate \fInr,nt
Request that the peer compress packets that it sends, using the
Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
The IP address for the remote end of the link. This is only set when
IPCP has come up.
.TP
+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link. This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link. This is only
+set when IPV6CP has come up.
+.TP
.B PEERNAME
The authenticated name of the peer. This is only set if the peer
authenticates itself.