.\" manual page [] for pppd 2.3
-.\" $Id: pppd.8,v 1.34 1999/03/12 06:07:19 paulus Exp $
+.\" $Id: pppd.8,v 1.51 1999/12/23 01:29:11 paulus Exp $
.\" SH section heading
.\" SS subsection heading
.\" LP paragraph
computer. This mode retains the ability to use DTR as
a modem control line.
.TP
-.B cdtrcts
-Use a non-standard hardware flow control (i.e. DTR/CTS) to control
-the flow of data on the serial port. If neither the \fIcrtscts\fR,
-the \fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR
-option is given, the hardware flow control setting for the serial
-port is left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement true
-bi-directional flow control. The sacrifice is that this flow
-control mode does not permit using DTR as a modem control line.
-.TP
.B defaultroute
Add a default route to the system routing tables, using the peer as
the gateway, when IPCP negotiation is successfully completed.
Read options from file \fIname\fR (the format is described below).
The file must be readable by the user who has invoked pppd.
.TP
+.B init \fIscript
+Run the executable or shell command specified by \fIscript\fR to
+initialize the serial line. This script would typically use the
+chat(8) program to configure the modem to enable auto answer. A value
+for this option from a privileged source cannot be overridden by a
+non-privileged user.
+.TP
.B lock
Specifies that pppd should create a UUCP-style lock file for the
serial device to ensure exclusive access to the device.
will ask the peer to send packets of no more than \fIn\fR bytes. The
minimum MRU value is 128. The default MRU value is 1500. A value of
296 is recommended for slow links (40 bytes for TCP/IP header + 256
-bytes of data).
+bytes of data). (Note that for IPv6 MRU must be at least 1280)
.TP
.B mtu \fIn
Set the MTU [Maximum Transmit Unit] value to \fIn\fR. Unless the
peer requests a smaller value via MRU negotiation, pppd will
request that the kernel networking code send data packets of no more
-than \fIn\fR bytes through the PPP network interface.
+than \fIn\fR bytes through the PPP network interface. (Note that for
+IPv6 MTU must be at least 1280)
.TP
.B passive
Enables the "passive" option in the LCP. With this option, pppd will
negotiation, unless the \fIipcp-accept-local\fR and/or
\fIipcp-accept-remote\fR options are given, respectively.
.TP
+.B ipv6 \fI<local_interface_identifier>\fR,\fI<remote_interface_identifier>
+Set the local and/or remote 64-bit interface identifier. Either one may be
+omitted. The identifier must be specified in standard ascii notation of
+IPv6 addresses (e.g. ::dead:beef). If the
+\fIipv6cp-use-ipaddr\fR
+option is given, the local identifier is the local IPv4 address (see above).
+On systems which supports a unique persistent id, such as EUI-48 derived
+from the Ethernet MAC address, \fIipv6cp-use-persistent\fR option can be
+used to replace the \fIipv6 <local>,<remote>\fR option. Otherwise the
+identifier is randomized.
+.TP
.B active-filter \fIfilter-expression
Specifies a packet filter to be applied to data packets to determine
which packets are to be regarded as link activity, and therefore reset
is currently only available under NetBSD, and then only
if both the kernel and pppd were compiled with PPP_FILTER defined.
.TP
+.B allow-ip \fIaddress(es)
+Allow peers to use the given IP address or subnet without
+authenticating themselves. The parameter is parsed as for each
+element of the list of allowed IP addresses in the secrets files (see
+the AUTHENTICATION section below).
+.TP
.B bsdcomp \fInr,nt
Request that the peer compress packets that it sends, using the
BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and
compression in the corresponding direction. Use \fInobsdcomp\fR or
\fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
.TP
+.B cdtrcts
+Use a non-standard hardware flow control (i.e. DTR/CTS) to control
+the flow of data on the serial port. If neither the \fIcrtscts\fR,
+the \fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR
+option is given, the hardware flow control setting for the serial
+port is left unchanged.
+Some serial ports (such as Macintosh serial ports) lack a true
+RTS output. Such serial ports use this mode to implement true
+bi-directional flow control. The sacrifice is that this flow
+control mode does not permit using DTR as a modem control line.
+.TP
.B chap-interval \fIn
If this option is given, pppd will rechallenge the peer every \fIn\fR
seconds.
Set the CHAP restart interval (retransmission timeout for challenges)
to \fIn\fR seconds (default 3).
.TP
+.B connect-delay \fIn
+Wait for up \fIn\fR milliseconds after the connect script finishes for
+a valid PPP packet from the peer. At the end of this time, or when a
+valid PPP packet is received from the peer, pppd will commence
+negotiation by sending its first LCP packet. The default value is
+1000 (1 second). This wait period only applies if the \fBconnect\fR
+or \fBpty\fR option is used.
+.TP
.B debug
Enables connection debugging facilities.
If this option is given, pppd will log the contents of all
.TP
.B hide-password
When logging the contents of PAP packets, this option causes pppd to
-exclude the password string from the log.
+exclude the password string from the log. This is the default.
.TP
.B holdoff \fIn
Specifies how many seconds to wait before re-initiating the link after
option is given, the \fIstring\fR supplied is given as the 6th
parameter to those scripts.
.TP
+.B ipv6cp-max-configure \fIn
+Set the maximum number of IPv6CP configure-request transmissions to
+\fIn\fR (default 10).
+.TP
+.B ipv6cp-max-failure \fIn
+Set the maximum number of IPv6CP configure-NAKs returned before starting
+to send configure-Rejects instead to \fIn\fR (default 10).
+.TP
+.B ipv6cp-max-terminate \fIn
+Set the maximum number of IPv6CP terminate-request transmissions to
+\fIn\fR (default 3).
+.TP
+.B ipv6cp-restart \fIn
+Set the IPv6CP restart interval (retransmission timeout) to \fIn\fR
+seconds (default 3).
+.TP
.B ipx
Enable the IPXCP and IPX protocols. This option is presently only
supported under Linux, and only if your kernel has been configured to
the kernel are logged by syslog(1) to a file as directed in the
/etc/syslog.conf configuration file.
.TP
+.B ktune
+Enables pppd to alter kernel settings as appropriate. Under Linux,
+pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
+to 1) if the \fIproxyarp\fR option is used, and will enable the
+dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
+1) in demand mode if the local address changes.
+.TP
.B lcp-echo-failure \fIn
If this option is given, pppd will presume the peer to be dead
if \fIn\fR LCP echo-requests are sent without receiving a valid LCP
Set the LCP restart interval (retransmission timeout) to \fIn\fR
seconds (default 3).
.TP
+.B linkname \fIname\fR
+Sets the logical name of the link to \fIname\fR. Pppd will create a
+file named \fBppp-\fIname\fB.pid\fR in /var/run (or /etc/ppp on some
+systems) containing its process ID. This can be useful in determining
+which instance of pppd is responsible for the link to a given peer
+system. This is a privileged option.
+.TP
.B local
Don't use the modem control lines. With this option, pppd will ignore
the state of the CD (Carrier Detect) signal from the modem and will
not change the state of the DTR (Data Terminal Ready) signal.
.TP
+.B logfd \fIn
+Send log messages to file descriptor \fIn\fR. Pppd will send log
+messages to at most one file or file descriptor (as well as sending
+the log messages to syslog), so this option and the \fBlogfile\fR
+option are mutually exclusive. The default is for pppd to send log
+messages to stdout (file descriptor 1), unless the serial port is
+already open on stdout.
+.TP
+.B logfile \fIfilename
+Append log messages to the file \fIfilename\fR (as well as sending the
+log messages to syslog). The file is opened with the privileges of
+the user who invoked pppd, in append mode.
+.TP
.B login
Use the system password database for authenticating the peer using
PAP, and record the user in the system wtmp file. Note that the peer
traffic for \fIn\fR seconds (i.e. \fIn\fR seconds after the first
network control protocol comes up).
.TP
+.B maxfail \fIn
+Terminate after \fIn\fR consecutive failed connection attempts. A
+value of 0 means no limit. The default value is 10.
+.TP
.B modem
Use the modem control lines. This option is the default. With this
option, pppd will wait for the CD (Carrier Detect) signal from the
only be required if the peer is buggy and gets confused by requests
from pppd for IPCP negotiation.
.TP
+.B noipv6
+Disable IPv6CP negotiation and IPv6 communication. This option should
+only be required if the peer is buggy and gets confused by requests
+from pppd for IPv6CP negotiation.
+.TP
.B noipdefault
Disables the default behaviour when no local IP address is specified,
which is to determine (if possible) the local IP address from the
required if the peer is buggy and gets confused by requests from pppd
for IPXCP negotiation.
.TP
+.B noktune
+Opposite of the \fIktune\fR option; disables pppd from changing system
+settings.
+.TP
+.B nolog
+Do not send log messages to a file or file descriptor. This option
+cancels the \fBlogfd\fR and \fBlogfile\fR options.
.B nomagic
Disable magic number negotiation. With this option, pppd cannot
detect a looped-back line. This option should only be needed if the
specified.
.TP
.B nopredictor1
-Do not accept or agree to Predictor-1 comprssion.
+Do not accept or agree to Predictor-1 compression.
.TP
.B noproxyarp
Disable the \fIproxyarp\fR option. The system administrator who
wishes to prevent users from creating proxy ARP entries with pppd can
do so by placing this option in the /etc/ppp/options file.
.TP
+.B notty
+Normally, pppd requires a terminal device. With this option, pppd
+will allocate itself a pseudo-tty master/slave pair and use the slave
+as its terminal device. Pppd will create a child process to act as a
+`character shunt' to transfer characters between the pseudo-tty master
+and its standard input and output. Thus pppd will transmit characters
+on its standard output and receive characters on its standard input
+even if they are not terminal devices. This option increases the
+latency and CPU overhead of transferring data over the ppp interface
+as all of the characters sent and received must flow through the
+character shunt process. An explicit device name may not be given if
+this option is used.
+.TP
.B novj
Disable Van Jacobson style TCP/IP header compression in both the
transmit and the receive direction.
Do not exit after a connection is terminated; instead try to reopen
the connection.
.TP
+.B plugin \fIfilename
+Load the shared library object file \fIfilename\fR as a plugin. This
+is a privileged option.
+.TP
.B predictor1
Request that the peer compress frames that it sends using Predictor-1
compression, and agree to compress transmitted frames with Predictor-1
system. This will have the effect of making the peer appear to other
systems to be on the local ethernet.
.TP
+.B pty \fIscript
+Specifies that the command \fIscript\fR is to be used to communicate
+rather than a specific terminal device. Pppd will allocate itself a
+pseudo-tty master/slave pair and use the slave as its terminal
+device. The \fIscript\fR will be run in a child process with the
+pseudo-tty master as its standard input and output. An explicit
+device name may not be given if this option is used. (Note: if the
+\fIrecord\fR option is used in conjuction with the \fIpty\fR option,
+the child process will have pipes on its standard input and output.)
+.TP
+.B receive-all
+With this option, pppd will accept all control characters from the
+peer, including those marked in the receive asyncmap. Without this
+option, pppd will discard those characters as specified in RFC1662.
+This option should only be needed if the peer is buggy.
+.TP
+.B record \fIfilename
+Specifies that pppd should record all characters sent and received to
+a file named \fIfilename\fR. This file is opened in append mode,
+using the user's user-ID and permissions. This option is implemented
+using a pseudo-tty and a process to transfer characters between the
+pseudo-tty and the real serial device, so it will increase the latency
+and CPU overhead of transferring data over the ppp interface. The
+characters are stored in a tagged format with timestamps, which can be
+displayed in readable form using the pppdump(8) program.
+.TP
.B remotename \fIname
Set the assumed name of the remote system for authentication purposes
to \fIname\fR.
Require the peer to authenticate itself using PAP [Password
Authentication Protocol] authentication.
.TP
+.B show-password
+When logging the contents of PAP packets, this option causes pppd to
+show the password string in the log message.
+.TP
.B silent
With this option, pppd will not transmit LCP packets to initiate a
connection until a valid LCP packet is received from the peer (as for
the `passive' option with ancient versions of pppd).
.TP
+.B sync
+Use synchronous HDLC serial encoding instead of asynchronous.
+The device used by pppd with this option must have sync support.
+Currently supports Microgate SyncLink adapters
+under Linux and FreeBSD 2.2.8 and later.
+.TP
+.B updetach
+With this option, pppd will detach from its controlling terminal once
+it has successfully established the ppp connection (to the point where
+the first network control protocol, usually the IP control protocol,
+has come up).
+.TP
.B usehostname
Enforce the use of the hostname (with domain name appended, if given)
as the name of the local system for authentication purposes (overrides
the \fIname\fR option). This option is not normally needed since the
\fIname\fR option is privileged.
.TP
+.B usepeerdns
+Ask the peer for up to 2 DNS server addresses. The addresses supplied
+by the peer (if any) are passed to the /etc/ppp/ip-up script in the
+environment variables DNS1 and DNS2. In addition, pppd will create an
+/etc/ppp/resolv.conf file containing one or two nameserver lines with
+the address(es) supplied by the peer.
+.TP
.B user \fIname
Sets the name used for authenticating the local system to the peer to
\fIname\fR.
A secrets file is parsed into words as for a options file, so the
client name, server name and secrets fields must each be one word,
with any embedded spaces or other special characters quoted or
-escaped. Any following words on the same line are taken to be a list
-of acceptable IP addresses for that client. If there are only 3 words
-on the line, or if the first word is "-", then all IP addresses are
-disallowed. To allow any address, use "*".
-A word starting with "!" indicates that the
-specified address is \fInot\fR acceptable. An address may be followed
-by "/" and a number \fIn\fR, to indicate a whole subnet, i.e. all
-addresses which have the same value in the most significant \fIn\fR
-bits. Note that case is significant in the client and server names
+escaped. Note that case is significant in the client and server names
and in the secret.
.LP
If the secret starts with an `@', what follows is assumed to be the
server name matches any name. When selecting a secret, pppd takes the
best match, i.e. the match with the fewest wildcards.
.LP
+Any following words on the same line are taken to be a list of
+acceptable IP addresses for that client. If there are only 3 words on
+the line, or if the first word is "-", then all IP addresses are
+disallowed. To allow any address, use "*". A word starting with "!"
+indicates that the specified address is \fInot\fR acceptable. An
+address may be followed by "/" and a number \fIn\fR, to indicate a
+whole subnet, i.e. all addresses which have the same value in the most
+significant \fIn\fR bits. In this form, the address may be followed
+by a plus sign ("+") to indicate that one address from the subnet is
+authorized, based on the ppp network interface unit number in use.
+In this case, the host part of the address will be set to the unit
+number plus one.
+.LP
Thus a secrets file contains both secrets for use in authenticating
other hosts, plus secrets which we use for authenticating ourselves to
others. When pppd is authenticating the peer (checking the peer's
.LP
Debugging can also be enabled or disabled by sending a SIGUSR1 signal
to the pppd process. This signal acts as a toggle.
+.SH EXIT STATUS
+The exit status of pppd is set to indicate whether any error was
+detected, or the reason for the link being terminated. The values
+used are:
+.TP
+.B 0
+Pppd has detached, or otherwise the connection was successfully
+established and terminated at the peer's request.
+.TP
+.B 1
+An immediately fatal error of some kind occurred, such as an essential
+system call failing, or running out of virtual memory.
+.TP
+.B 2
+An error was detected in processing the options given, such as two
+mutually exclusive options being used.
+.TP
+.B 3
+Pppd is not setuid-root and the invoking user is not root.
+.TP
+.B 4
+The kernel does not support PPP, for example, the PPP kernel driver is
+not included or cannot be loaded.
+.TP
+.B 5
+Pppd terminated because it was sent a SIGINT, SIGTERM or SIGHUP
+signal.
+.TP
+.B 6
+The serial port could not be locked.
+.TP
+.B 7
+The serial port could not be opened.
+.TP
+.B 8
+The connect script failed (returned a non-zero exit status).
+.TP
+.B 9
+The command specified as the argument to the \fIpty\fR option could
+not be run.
+.TP
+.B 10
+The PPP negotiation failed, that is, it didn't reach the point where
+at least one network protocol (e.g. IP) was running.
+.TP
+.B 11
+The peer system failed (or refused) to authenticate itself.
+.TP
+.B 12
+The link was established successfully and terminated because it was
+idle.
+.TP
+.B 13
+The link was established successfully and terminated because the
+connect time limit was reached.
+.TP
+.B 14
+Callback was negotiated and an incoming call should arrive shortly.
+.TP
+.B 15
+The link was terminated because the peer is not responding to echo
+requests.
+.TP
+.B 16
+The link was terminated by the modem hanging up.
+.TP
+.B 17
+The PPP negotiation failed because serial loopback was detected.
+.TP
+.B 18
+The init script failed (returned a non-zero exit status).
+.TP
+.B 19
+We failed to authenticate ourselves to the peer.
.SH SCRIPTS
Pppd invokes scripts at various stages in its processing which can be
used to perform site-specific ancillary processing. These scripts are
.TP
.B ORIG_UID
The real user-id of the user who invoked pppd.
+.TP
+.B PPPLOGNAME
+The username of the real user-id that invoked pppd. This is always set.
+.P
+For the ip-down and auth-down scripts, pppd also sets the following
+variables giving statistics for the connection:
+.TP
+.B CONNECT_TIME
+The number of seconds from when the PPP negotiation started until the
+connection was terminated.
+.TP
+.B BYTES_SENT
+The number of bytes sent (at the level of the serial port) during the
+connection.
+.TP
+.B BYTES_RCVD
+The number of bytes received (at the level of the serial port) during
+the connection.
+.TP
+.B LINKNAME
+The logical name of the link, set with the \fIlinkname\fR option.
.P
Pppd invokes the following scripts, if they exist. It is not an error
if they don't exist.
invoked in the same manner and with the same parameters as the ip-up
script.
.TP
+.B /etc/ppp/ipv6-up
+Like /etc/ppp/ip-up, except that it is executed when the link is available
+for sending and receiving IPv6 packets. It is executed with the parameters
+.IP
+\fIinterface-name tty-device speed local-link-local-address
+remote-link-local-address ipparam\fR
+.TP
+.B /etc/ppp/ipv6-down
+Similar to /etc/ppp/ip-down, but it is executed when IPv6 packets can no
+longer be transmitted on the link. It is executed with the same parameters
+as the ipv6-up script.
+.TP
.B /etc/ppp/ipx-up
A program or script which is executed when the link is available for
sending and receiving IPX packets (that is, IPXCP has come up). It is
.B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
Process-ID for pppd process on ppp interface unit \fIn\fR.
.TP
+.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)
+Process-ID for pppd process for logical link \fIname\fR (see the
+\fIlinkname\fR option).
+.TP
.B /etc/ppp/pap-secrets
Usernames, passwords and IP addresses for PAP authentication. This
file should be owned by root and not readable or writable by any other
Simpson, W.A.
.I PPP in HDLC-like Framing.
July 1994.
+.TP
+.B RFC2472
+Haskin, D.
+.I IP Version 6 over PPP
+December 1998.
.SH NOTES
The following signals have the specified effect when sent to pppd.
.TP