*/
#ifndef lint
-static char rcsid[] = "$Id: main.c,v 1.1 1993/11/11 03:54:25 paulus Exp $";
+static char rcsid[] = "$Id: main.c,v 1.70 1999/03/31 05:39:42 paulus Exp $";
#endif
-#define SETSID
-
#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#include <signal.h>
#include <errno.h>
#include <fcntl.h>
#include <syslog.h>
#include <netdb.h>
#include <utmp.h>
-
-#ifdef STREAMS
-#undef SGTTY
-#endif
-
-#ifdef SGTTY
-#include <sgtty.h>
-#else
-#ifndef sun
-#include <sys/ioctl.h>
-#endif
-#include <termios.h>
-#endif
-
+#include <pwd.h>
+#include <setjmp.h>
#include <sys/param.h>
#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/socket.h>
-#include <sys/time.h>
-
-#include "callout.h"
-
-#include <net/if.h>
-#include <net/if_ppp.h>
-
-#include <string.h>
-
-#ifndef BSD
-#define BSD 43
-#endif /*BSD*/
+#include <netinet/in.h>
-#include "ppp.h"
+#include "pppd.h"
#include "magic.h"
#include "fsm.h"
#include "lcp.h"
#include "ipcp.h"
#include "upap.h"
#include "chap.h"
-
-#include "pppd.h"
+#include "ccp.h"
#include "pathnames.h"
#include "patchlevel.h"
+#ifdef CBCP_SUPPORT
+#include "cbcp.h"
+#endif
-#ifndef TRUE
-#define TRUE (1)
-#endif /*TRUE*/
-
-#ifndef FALSE
-#define FALSE (0)
-#endif /*FALSE*/
+#if defined(SUNOS4)
+extern char *strerror();
+#endif
-#ifdef PIDPATH
-static char *pidpath = PIDPATH; /* filename in which pid will be stored */
-#else
-static char *pidpath = _PATH_PIDFILE;
-#endif /* PIDFILE */
+#ifdef IPX_CHANGE
+#include "ipxcp.h"
+#endif /* IPX_CHANGE */
+#ifdef AT_CHANGE
+#include "atcp.h"
+#endif
/* interface vars */
-char ifname[IFNAMSIZ]; /* Interface name */
+char ifname[32]; /* Interface name */
int ifunit; /* Interface unit number */
char *progname; /* Name of this program */
char hostname[MAXNAMELEN]; /* Our hostname */
-char our_name[MAXNAMELEN];
-char remote_name[MAXNAMELEN];
-
-static pid_t pid; /* Our pid */
-static pid_t pgrpid; /* Process Group ID */
-static char pidfilename[MAXPATHLEN];
-
-char devname[MAXPATHLEN] = "/dev/tty"; /* Device name */
-int default_device = TRUE; /* use default device (stdin/out) */
-
-int fd; /* Device file descriptor */
-int s; /* Socket file descriptor */
-
-#ifdef SGTTY
-static struct sgttyb initsgttyb; /* Initial TTY sgttyb */
-#else
-static struct termios inittermios; /* Initial TTY termios */
-#endif
-
-static int initfdflags = -1; /* Initial file descriptor flags */
-
-static int restore_term; /* 1 => we've munged the terminal */
-
-u_char outpacket_buf[MTU+DLLHEADERLEN]; /* buffer for outgoing packet */
-static u_char inpacket_buf[MTU+DLLHEADERLEN]; /* buffer for incoming packet */
-
+static char pidfilename[MAXPATHLEN]; /* name of pid file */
+static char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */
+static pid_t pid; /* Our pid */
+static uid_t uid; /* Our real user-id */
+static int conn_running; /* we have a [dis]connector running */
+
+int ttyfd; /* Serial port file descriptor */
+mode_t tty_mode = -1; /* Original access permissions to tty */
+int baud_rate; /* Actual bits/second for serial device */
int hungup; /* terminal has been hung up */
+int privileged; /* we're running as real uid root */
+int need_holdoff; /* need holdoff period before restarting */
+int detached; /* have detached from terminal */
+int log_to_fd; /* send log messages to this fd too */
+
+static int fd_ppp = -1; /* fd for talking PPP */
+static int fd_loop; /* fd for getting demand-dial packets */
+static int pty_master; /* fd for master side of pty */
+static int pty_slave; /* fd for slave side of pty */
+static int real_ttyfd; /* fd for actual serial port (not pty) */
+
+int phase; /* where the link is at */
+int kill_link;
+int open_ccp_flag;
+
+static int waiting;
+static sigjmp_buf sigjmp;
+
+char **script_env; /* Env. variable values for scripts */
+int s_env_nalloc; /* # words avail at script_env */
+
+u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */
+u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
+
+static int n_children; /* # child processes still running */
+static int got_sigchld; /* set if we have received a SIGCHLD */
+
+static int locked; /* lock() has succeeded */
+
+char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
+
+GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */
+int ngroups; /* How many groups valid in groups */
+
+static struct timeval start_time; /* Time when link was started. */
+
+struct pppd_stats link_stats;
+int link_stats_valid;
+
+static int charshunt_pid; /* Process ID for charshunt */
+
+/* Prototypes for procedures local to this file. */
+
+static void create_pidfile __P((void));
+static void cleanup __P((void));
+static void close_tty __P((void));
+static void get_input __P((void));
+static void calltimeout __P((void));
+static struct timeval *timeleft __P((struct timeval *));
+static void kill_my_pg __P((int));
+static void hup __P((int));
+static void term __P((int));
+static void chld __P((int));
+static void toggle_debug __P((int));
+static void open_ccp __P((int));
+static void bad_signal __P((int));
+static void holdoff_end __P((void *));
+static int device_script __P((char *, int, int, int));
+static void reap_kids __P((int waitfor));
+static void pr_log __P((void *, char *, ...));
+static void logit __P((int, char *, va_list));
+static void vslp_printer __P((void *, char *, ...));
+static void format_packet __P((u_char *, int, void (*) (void *, char *, ...),
+ void *));
+static void record_child __P((int, char *, void (*) (void *), void *));
+static int start_charshunt __P((int, int));
+static void charshunt_done __P((void *));
+static void charshunt __P((int, int, char *));
+static int record_write(FILE *, int code, u_char *buf, int nb,
+ struct timeval *);
+
+extern char *ttyname __P((int));
+extern char *getlogin __P((void));
+int main __P((int, char *[]));
+
+#ifdef ultrix
+#undef O_NONBLOCK
+#define O_NONBLOCK O_NDELAY
+#endif
-/* configured variables */
-
-int debug = 0; /* Debug flag */
-char user[MAXNAMELEN]; /* username for PAP */
-char passwd[MAXSECRETLEN]; /* password for PAP */
-char *connector = NULL; /* "connect" command */
-int inspeed = 0; /* Input/Output speed */
-u_long netmask = 0; /* netmask to use on ppp interface */
-int crtscts = 0; /* use h/w flow control */
-int nodetach = 0; /* don't fork */
-int modem = 0; /* use modem control lines */
-int auth_required = 0; /* require peer to authenticate */
-int defaultroute = 0; /* assign default route through interface */
-int proxyarp = 0; /* set entry in arp table */
-int persist = 0; /* re-initiate on termination */
-int answer = 0; /* wait for incoming call */
-int uselogin = 0; /* check PAP info against /etc/passwd */
-
-
-/* prototypes */
-static void hup __ARGS((int, int, struct sigcontext *, char *));
-static void intr __ARGS((int, int, struct sigcontext *, char *));
-static void term __ARGS((int, int, struct sigcontext *, char *));
-static void alrm __ARGS((int, int, struct sigcontext *, char *));
-static void io __ARGS((int, int, struct sigcontext *, char *));
-static void incdebug __ARGS((int));
-static void nodebug __ARGS((int));
-void establish_ppp __ARGS((void));
-
-void cleanup __ARGS((int, caddr_t));
-void die __ARGS((int));
-void dumpbuffer __ARGS((unsigned char *, int, int));
-
-#ifdef STREAMS
-extern char *ttyname __ARGS((int));
+#ifdef ULTRIX
+#define setlogmask(x)
#endif
-extern char *getlogin __ARGS((void));
/*
* PPP Data Link Layer "protocol" table.
* One entry per supported protocol.
+ * The last entry must be NULL.
*/
-static struct protent {
- u_short protocol;
- void (*init)();
- void (*input)();
- void (*protrej)();
-} prottbl[] = {
- { LCP, lcp_init, lcp_input, lcp_protrej },
- { IPCP, ipcp_init, ipcp_input, ipcp_protrej },
- { UPAP, upap_init, upap_input, upap_protrej },
- { CHAP, ChapInit, ChapInput, ChapProtocolReject },
+struct protent *protocols[] = {
+ &lcp_protent,
+ &pap_protent,
+ &chap_protent,
+#ifdef CBCP_SUPPORT
+ &cbcp_protent,
+#endif
+ &ipcp_protent,
+ &ccp_protent,
+#ifdef IPX_CHANGE
+ &ipxcp_protent,
+#endif
+#ifdef AT_CHANGE
+ &atcp_protent,
+#endif
+ NULL
};
-
+int
main(argc, argv)
int argc;
char *argv[];
{
- int mask, i;
- struct sigvec sv;
- struct cmd *cmdp;
- FILE *pidfile;
+ int i, fdflags;
+ struct sigaction sa;
char *p;
+ struct passwd *pw;
+ struct timeval timo;
+ sigset_t mask;
+ struct protent *protp;
+ struct stat statbuf;
+ char numbuf[16];
+ struct timeval now;
- /*
- * Initialize syslog system and magic number package.
- */
-#if BSD >= 43 || defined(sun)
- openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
- setlogmask(LOG_UPTO(LOG_INFO));
-#else
- openlog("pppd", LOG_PID);
-#define LOG_UPTO(x) (x)
-#define setlogmask(x) (x)
-#endif
+ phase = PHASE_INITIALIZE;
+ log_to_fd = -1;
-#ifdef STREAMS
- p = ttyname(fileno(stdin));
- if (p)
- strcpy(devname, p);
-#endif
-
- magic_init();
+ script_env = NULL;
+
+ /* Initialize syslog facilities */
+ reopen_log();
if (gethostname(hostname, MAXNAMELEN) < 0 ) {
- syslog(LOG_ERR, "couldn't get hostname: %m");
- die(1);
+ option_error("Couldn't get hostname: %m");
+ exit(1);
}
hostname[MAXNAMELEN-1] = 0;
- pid = getpid();
+ uid = getuid();
+ privileged = uid == 0;
+ slprintf(numbuf, sizeof(numbuf), "%d", uid);
+ script_setenv("ORIG_UID", numbuf);
+
+ ngroups = getgroups(NGROUPS_MAX, groups);
/*
* Initialize to the standard option set, then parse, in order,
- * the system options file, the user's options file, and the command
- * line arguments.
+ * the system options file, the user's options file,
+ * the tty's options file, and the command line arguments.
*/
- for (i = 0; i < sizeof (prottbl) / sizeof (struct protent); i++)
- (*prottbl[i].init)(0);
-
- progname = *argv;
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ (*protp->init)(0);
- if (!options_from_file(_PATH_SYSOPTIONS) ||
- !options_from_user() ||
- !parse_args(argc-1, argv+1))
- die(1);
- check_auth_options();
- setipdefault();
+ progname = *argv;
- p = getlogin();
- if (p == NULL)
- p = "(unknown)";
- syslog(LOG_NOTICE, "pppd %s.%d started by %s, uid %d",
- VERSION, PATCHLEVEL, p, getuid());
+ if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
+ || !options_from_user())
+ exit(1);
+ using_pty = notty || ptycommand != NULL;
+ scan_args(argc-1, argv+1); /* look for tty name on command line */
-#ifdef SETSID
/*
- * Make sure we can set the serial device to be our controlling terminal.
+ * Work out the device name, if it hasn't already been specified.
*/
- if (default_device) {
- /*
- * No device name was specified:
- * we are in the device's session already.
- */
- if ((pgrpid = getpgrp(0)) < 0) {
- syslog(LOG_ERR, "getpgrp(0): %m");
- die(1);
- }
- if (pgrpid != pid)
- syslog(LOG_WARNING, "warning... not a process group leader");
-
- } else {
- /*
- * Not default device: make sure we're not a process group leader,
- * then become session leader of a new session (so we can make
- * our device its controlling terminal and thus get SIGHUPs).
- */
- if (!nodetach) {
- /* fork so we're not a process group leader */
- if (pid = fork()) {
- exit(0); /* parent is finished */
- }
- if (pid < 0) {
- syslog(LOG_ERR, "fork: %m");
- die(1);
- }
- pid = getpid(); /* otherwise pid is 0 in child */
- } else {
- /*
- * try to put ourself into our parent's process group,
- * so we're not a process group leader
- */
- if (setpgrp(pid, getppid()) < 0)
- syslog(LOG_WARNING, "setpgrp: %m");
- }
-
- /* create new session */
- if ((pgrpid = setsid()) < 0) {
- syslog(LOG_ERR, "setsid(): %m");
- die(1);
+ if (!using_pty) {
+ p = isatty(0)? ttyname(0): NULL;
+ if (p != NULL) {
+ if (default_device)
+ strlcpy(devnam, p, sizeof(devnam));
+ else if (strcmp(devnam, p) == 0)
+ default_device = 1;
}
}
-#endif
- /* Get an internet socket for doing socket ioctl's on. */
- if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- syslog(LOG_ERR, "socket : %m");
- die(1);
- }
-
/*
- * Compute mask of all interesting signals and install signal handlers
- * for each. Only one signal handler may be active at a time. Therefore,
- * all other signals should be masked when any handler is executing.
+ * Parse the tty options file and the command line.
*/
- sigemptyset(&mask);
- sigaddset(&mask, SIGHUP);
- sigaddset(&mask, SIGINT);
- sigaddset(&mask, SIGALRM);
- sigaddset(&mask, SIGIO);
-#ifdef STREAMS
- sigaddset(&mask, SIGPOLL);
-#endif
-
-#define SIGNAL(s, handler) { \
- sv.sv_handler = handler; \
- if (sigvec(s, &sv, NULL) < 0) { \
- syslog(LOG_ERR, "sigvec(%d): %m", s); \
- die(1); \
- } \
- }
-
- sv.sv_mask = mask;
- sv.sv_flags = 0;
- SIGNAL(SIGHUP, hup); /* Hangup */
- SIGNAL(SIGINT, intr); /* Interrupt */
- SIGNAL(SIGTERM, term); /* Terminate */
- SIGNAL(SIGALRM, alrm); /* Timeout */
- SIGNAL(SIGIO, io); /* Input available */
-#ifdef STREAMS
- SIGNAL(SIGPOLL, io); /* Input available */
-#endif
-
- signal(SIGUSR1, incdebug); /* Increment debug flag */
- signal(SIGUSR2, nodebug); /* Reset debug flag */
-
+ if (!options_for_tty()
+ || !parse_args(argc-1, argv+1))
+ exit(1);
/*
- * Open the serial device and set it up to be the ppp interface.
+ * Check that we are running as root.
*/
- if ((fd = open(devname, O_RDWR /*| O_NDELAY*/)) < 0) {
- syslog(LOG_ERR, "open(%s): %m", devname);
- die(1);
+ if (geteuid() != 0) {
+ option_error("must be root to run %s, since it is not setuid-root",
+ argv[0]);
+ exit(1);
}
- hungup = 0;
- /* set device to be controlling tty */
- if (!default_device && ioctl(fd, TIOCSCTTY) < 0) {
- syslog(LOG_ERR, "ioctl(TIOCSCTTY): %m");
- die(1);
+ if (!ppp_available()) {
+ option_error(no_ppp_msg);
+ exit(1);
}
- /* set line speed, flow control, etc. */
- set_up_tty(fd);
-
- /* run connection script */
- if (connector) {
- syslog(LOG_INFO, "Connecting with <%s>", connector);
+ /*
+ * Check that the options given are valid and consistent.
+ */
+ if (!sys_check_options())
+ exit(1);
+ auth_check_options();
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ if (protp->check_options != NULL)
+ (*protp->check_options)();
+ if (demand && connector == 0) {
+ option_error("connect script is required for demand-dialling\n");
+ exit(1);
+ }
- /* drop dtr to hang up in case modem is off hook */
- if (!default_device && modem) {
- setdtr(fd, FALSE);
- sleep(1);
- setdtr(fd, TRUE);
+ if (using_pty) {
+ if (!default_device) {
+ option_error("%s option precludes specifying device name",
+ notty? "notty": "pty");
+ exit(1);
}
-
- if (set_up_connection(connector, fd, fd) < 0) {
- syslog(LOG_ERR, "could not set up connection");
- setdtr(fd, FALSE);
- die(1);
+ if (ptycommand != NULL && notty) {
+ option_error("pty option is incompatible with notty option");
+ exit(1);
}
-
- syslog(LOG_INFO, "Connected...");
- sleep(1); /* give it time to set up its terminal */
- }
-
- /* set up the serial device as a ppp interface */
- establish_ppp();
-
- syslog(LOG_INFO, "Using interface ppp%d", ifunit);
- (void) sprintf(ifname, "ppp%d", ifunit);
-
- /* write pid to file */
- (void) sprintf(pidfilename, "%s/%s.pid", pidpath, ifname);
- if ((pidfile = fopen(pidfilename, "w")) != NULL) {
- fprintf(pidfile, "%d\n", pid);
- (void) fclose(pidfile);
+ default_device = notty;
+ lockflag = 0;
+ modem = 0;
} else {
- syslog(LOG_ERR, "unable to create pid file: %m");
- pidfilename[0] = 0;
+ if (devnam[0] == 0) {
+ option_error("no device specified and stdin is not a tty");
+ exit(1);
+ }
}
+ if (default_device)
+ nodetach = 1;
+ else
+ log_to_fd = 1; /* default to stdout */
+
+ script_setenv("DEVICE", devnam);
/*
- * Set process group of device to our process group so we can get SIGIOs.
+ * Initialize system-dependent stuff and magic number package.
*/
-#ifdef SETSID
- if (default_device) {
- int id = tcgetpgrp(fd);
- if (id != pgrpid) {
- syslog(LOG_WARNING,
- "warning: not foreground process group leader");
- }
- } else {
- if (tcsetpgrp(fd, pgrpid) < 0) {
- syslog(LOG_ERR, "tcsetpgrp(): %m");
- die(1);
- }
- }
-#else
- /* set process group on tty so we get SIGIO's */
- if (ioctl(fd, TIOCSPGRP, &pgrpid) < 0) {
- syslog(LOG_ERR, "ioctl(TIOCSPGRP): %m");
- die(1);
- }
-#endif
+ sys_init();
+ magic_init();
+ if (debug)
+ setlogmask(LOG_UPTO(LOG_DEBUG));
/*
- * Record initial device flags, then set device to cause SIGIO
- * signals to be generated.
+ * Detach ourselves from the terminal, if required,
+ * and identify who is running us.
*/
- if ((initfdflags = fcntl(fd, F_GETFL)) == -1) {
- syslog(LOG_ERR, "fcntl(F_GETFL): %m");
- die(1);
- }
- if (fcntl(fd, F_SETFL, FNDELAY | FASYNC) == -1) {
- syslog(LOG_ERR, "fcntl(F_SETFL, FNDELAY | FASYNC): %m");
- die(1);
+ if (!nodetach && !updetach)
+ detach();
+ pid = getpid();
+ p = getlogin();
+ if (p == NULL) {
+ pw = getpwuid(uid);
+ if (pw != NULL && pw->pw_name != NULL)
+ p = pw->pw_name;
+ else
+ p = "(unknown)";
}
+ syslog(LOG_NOTICE, "pppd %s.%d%s started by %s, uid %d",
+ VERSION, PATCHLEVEL, IMPLEMENTATION, p, uid);
/*
- * Block all signals, start opening the connection, and wait for
- * incoming signals (reply, timeout, etc.).
+ * Compute mask of all interesting signals and install signal handlers
+ * for each. Only one signal handler may be active at a time. Therefore,
+ * all other signals should be masked when any handler is executing.
*/
- syslog(LOG_NOTICE, "Connect: %s <--> %s", ifname, devname);
- sigprocmask(SIG_BLOCK, &mask, NULL); /* Block signals now */
- lcp_lowerup(0); /* XXX Well, sort of... */
- lcp_open(0); /* Start protocol */
- for (;;) {
- sigpause(0); /* Wait for next signal */
- }
-}
+ sigemptyset(&mask);
+ sigaddset(&mask, SIGHUP);
+ sigaddset(&mask, SIGINT);
+ sigaddset(&mask, SIGTERM);
+ sigaddset(&mask, SIGCHLD);
+ sigaddset(&mask, SIGUSR2);
+
+#define SIGNAL(s, handler) do { \
+ sa.sa_handler = handler; \
+ if (sigaction(s, &sa, NULL) < 0) \
+ fatal("Couldn't establish signal handler (%d): %m", s); \
+ } while (0)
+
+ sa.sa_mask = mask;
+ sa.sa_flags = 0;
+ SIGNAL(SIGHUP, hup); /* Hangup */
+ SIGNAL(SIGINT, term); /* Interrupt */
+ SIGNAL(SIGTERM, term); /* Terminate */
+ SIGNAL(SIGCHLD, chld);
-#if B9600 == 9600
-/*
- * XXX assume speed_t values numerically equal bits per second
- * (so we can ask for any speed).
- */
-#define translate_speed(bps) (bps)
+ SIGNAL(SIGUSR1, toggle_debug); /* Toggle debug flag */
+ SIGNAL(SIGUSR2, open_ccp); /* Reopen CCP */
-#else
-/*
- * List of valid speeds.
- */
-struct speed {
- int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
- { 50, B50 },
-#endif
-#ifdef B75
- { 75, B75 },
-#endif
-#ifdef B110
- { 110, B110 },
-#endif
-#ifdef B134
- { 134, B134 },
-#endif
-#ifdef B150
- { 150, B150 },
-#endif
-#ifdef B200
- { 200, B200 },
-#endif
-#ifdef B300
- { 300, B300 },
-#endif
-#ifdef B600
- { 600, B600 },
-#endif
-#ifdef B1200
- { 1200, B1200 },
-#endif
-#ifdef B1800
- { 1800, B1800 },
-#endif
-#ifdef B2000
- { 2000, B2000 },
-#endif
-#ifdef B2400
- { 2400, B2400 },
-#endif
-#ifdef B3600
- { 3600, B3600 },
-#endif
-#ifdef B4800
- { 4800, B4800 },
+ /*
+ * Install a handler for other signals which would otherwise
+ * cause pppd to exit without cleaning up.
+ */
+ SIGNAL(SIGABRT, bad_signal);
+ SIGNAL(SIGALRM, bad_signal);
+ SIGNAL(SIGFPE, bad_signal);
+ SIGNAL(SIGILL, bad_signal);
+ SIGNAL(SIGPIPE, bad_signal);
+ SIGNAL(SIGQUIT, bad_signal);
+ SIGNAL(SIGSEGV, bad_signal);
+#ifdef SIGBUS
+ SIGNAL(SIGBUS, bad_signal);
#endif
-#ifdef B7200
- { 7200, B7200 },
+#ifdef SIGEMT
+ SIGNAL(SIGEMT, bad_signal);
#endif
-#ifdef B9600
- { 9600, B9600 },
+#ifdef SIGPOLL
+ SIGNAL(SIGPOLL, bad_signal);
#endif
-#ifdef B19200
- { 19200, B19200 },
+#ifdef SIGPROF
+ SIGNAL(SIGPROF, bad_signal);
#endif
-#ifdef B38400
- { 38400, B38400 },
+#ifdef SIGSYS
+ SIGNAL(SIGSYS, bad_signal);
#endif
-#ifdef EXTA
- { 19200, EXTA },
+#ifdef SIGTRAP
+ SIGNAL(SIGTRAP, bad_signal);
#endif
-#ifdef EXTB
- { 38400, EXTB },
+#ifdef SIGVTALRM
+ SIGNAL(SIGVTALRM, bad_signal);
#endif
-#ifdef B57600
- { 57600, B57600 },
+#ifdef SIGXCPU
+ SIGNAL(SIGXCPU, bad_signal);
#endif
-#ifdef B115200
- { 115200, B115200 },
+#ifdef SIGXFSZ
+ SIGNAL(SIGXFSZ, bad_signal);
#endif
- { 0, 0 }
-};
-/*
- * Translate from bits/second to a speed_t.
- */
-int
-translate_speed(bps)
- int bps;
-{
- struct speed *speedp;
+ /*
+ * Apparently we can get a SIGPIPE when we call syslog, if
+ * syslogd has died and been restarted. Ignoring it seems
+ * be sufficient.
+ */
+ signal(SIGPIPE, SIG_IGN);
- if (bps == 0)
- return 0;
- for (speedp = speeds; speedp->speed_int; speedp++)
- if (bps == speedp->speed_int)
- return speedp->speed_val;
- syslog(LOG_WARNING, "speed %d not supported", bps);
- return 0;
-}
-#endif
+ waiting = 0;
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.
- */
-set_up_tty(fd)
- int fd;
-{
-#ifndef SGTTY
- int speed;
- struct termios tios;
+ /*
+ * If we're doing dial-on-demand, set up the interface now.
+ */
+ if (demand) {
+ /*
+ * Open the loopback channel and set it up to be the ppp interface.
+ */
+ fd_loop = open_ppp_loopback();
- if (tcgetattr(fd, &tios) < 0) {
- syslog(LOG_ERR, "tcgetattr: %m");
- die(1);
- }
+ syslog(LOG_INFO, "Using interface ppp%d", ifunit);
+ slprintf(ifname, sizeof(ifname), "ppp%d", ifunit);
+ script_setenv("IFNAME", ifname);
- if (!restore_term)
- inittermios = tios;
-
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL | CRTSCTS);
- tios.c_cflag |= CS8 | CREAD | HUPCL;
- if (crtscts)
- tios.c_cflag |= CRTSCTS;
- if (!modem)
- tios.c_cflag |= CLOCAL;
- tios.c_iflag = IGNBRK | IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- tios.c_cc[VMIN] = 1;
- tios.c_cc[VTIME] = 0;
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed(&tios, speed);
- cfsetispeed(&tios, speed);
- }
+ create_pidfile(); /* write pid to file */
- if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
- syslog(LOG_ERR, "tcsetattr: %m");
- die(1);
+ /*
+ * Configure the interface and mark it up, etc.
+ */
+ demand_conf();
}
-#else /* SGTTY */
- int speed;
- struct sgttyb sgttyb;
- /*
- * Put the tty in raw mode.
- */
- if (ioctl(fd, TIOCGETP, &sgttyb) < 0) {
- syslog(LOG_ERR, "ioctl(TIOCGETP): %m");
- die(1);
- }
+ for (;;) {
- if (!restore_term)
- initsgttyb = sgttyb;
+ need_holdoff = 1;
+ ttyfd = -1;
+ real_ttyfd = -1;
- sgttyb.sg_flags = RAW | ANYP;
- speed = translate_speed(inspeed);
- if (speed)
- sgttyb.sg_ispeed = speed;
+ if (demand) {
+ /*
+ * Don't do anything until we see some activity.
+ */
+ kill_link = 0;
+ phase = PHASE_DORMANT;
+ demand_unblock();
+ add_fd(fd_loop);
+ for (;;) {
+ if (sigsetjmp(sigjmp, 1) == 0) {
+ sigprocmask(SIG_BLOCK, &mask, NULL);
+ if (kill_link) {
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ } else {
+ waiting = 1;
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ wait_input(timeleft(&timo));
+ }
+ }
+ waiting = 0;
+ calltimeout();
+ if (kill_link) {
+ if (!persist)
+ break;
+ kill_link = 0;
+ }
+ if (get_loop_output())
+ break;
+ if (got_sigchld)
+ reap_kids(0);
+ }
+ remove_fd(fd_loop);
+ if (kill_link && !persist)
+ break;
- if (ioctl(fd, TIOCSETP, &sgttyb) < 0) {
- syslog(LOG_ERR, "ioctl(TIOCSETP): %m");
- die(1);
- }
-#endif
- restore_term = TRUE;
-}
+ /*
+ * Now we want to bring up the link.
+ */
+ demand_block();
+ info("Starting link");
+ }
+ /*
+ * Get a pty master/slave pair if the pty, notty, or record
+ * options were specified.
+ */
+ strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
+ pty_master = -1;
+ pty_slave = -1;
+ if (ptycommand != NULL || notty || record_file != NULL) {
+ if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
+ error("Couldn't allocate pseudo-tty");
+ goto fail;
+ }
+ set_up_tty(pty_slave, 1);
+ }
-/*
- * quit - Clean up state and exit.
- */
-void
-quit()
-{
- die(0);
-}
+ /*
+ * Lock the device if we've been asked to.
+ */
+ if (lockflag && !default_device) {
+ if (lock(devnam) < 0)
+ goto fail;
+ locked = 1;
+ }
-/*
- * die - like quit, except we can specify an exit status.
- */
-void
-die(status)
- int status;
-{
- cleanup(0, NULL);
- syslog(LOG_INFO, "Exit.");
- exit(status);
-}
+ /*
+ * Open the serial device and set it up to be the ppp interface.
+ * First we open it in non-blocking mode so we can set the
+ * various termios flags appropriately. If we aren't dialling
+ * out and we want to use the modem lines, we reopen it later
+ * in order to wait for the carrier detect signal from the modem.
+ */
+ hungup = 0;
+ kill_link = 0;
+ if (devnam[0] != 0) {
+ for (;;) {
+ /* If the user specified the device name, become the
+ user before opening it. */
+ if (!devnam_info.priv && !default_device)
+ seteuid(uid);
+ ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
+ if (!devnam_info.priv && !default_device)
+ seteuid(0);
+ if (ttyfd >= 0)
+ break;
+ if (errno != EINTR)
+ error("Failed to open %s: %m", devnam);
+ if (!persist || errno != EINTR)
+ goto fail;
+ }
+ if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
+ || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
+ warn("Couldn't reset non-blocking mode on device: %m");
-/*
- * cleanup - restore anything which needs to be restored before we exit
- */
-/* ARGSUSED */
-void
-cleanup(status, arg)
- int status;
- caddr_t arg;
-{
- if (fd != 0) {
- /* drop dtr to hang up */
- if (modem)
- setdtr(fd, FALSE);
+ /*
+ * Do the equivalent of `mesg n' to stop broadcast messages.
+ */
+ if (fstat(ttyfd, &statbuf) < 0
+ || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
+ warn("Couldn't restrict write permissions to %s: %m", devnam);
+ } else
+ tty_mode = statbuf.st_mode;
- if (fcntl(fd, F_SETFL, initfdflags) < 0)
- syslog(LOG_ERR, "fcntl(F_SETFL, fdflags): %m");
+ /*
+ * Set line speed, flow control, etc.
+ * If we have a non-null connection script,
+ * on most systems we set CLOCAL for now so that we can talk
+ * to the modem before carrier comes up. But this has the
+ * side effect that we might miss it if CD drops before we
+ * get to clear CLOCAL below. On systems where we can talk
+ * successfully to the modem with CLOCAL clear and CD down,
+ * we could clear CLOCAL at this point.
+ */
+ set_up_tty(ttyfd, (connector != NULL && connector[0] != 0));
+ real_ttyfd = ttyfd;
+ }
- disestablish_ppp();
+ /*
+ * If the notty and/or record option was specified,
+ * start up the character shunt now.
+ */
+ if (ptycommand != NULL) {
+ if (record_file != NULL) {
+ int ipipe[2], opipe[2], ok;
+
+ if (pipe(ipipe) < 0 || pipe(opipe) < 0)
+ fatal("Couldn't create pipes for record option: %m");
+ ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
+ && start_charshunt(ipipe[0], opipe[1]);
+ close(ipipe[0]);
+ close(ipipe[1]);
+ close(opipe[0]);
+ close(opipe[1]);
+ if (!ok)
+ goto fail;
+ } else {
+ if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
+ goto fail;
+ ttyfd = pty_slave;
+ close(pty_master);
+ pty_master = -1;
+ }
+ } else if (notty) {
+ if (!start_charshunt(0, 1))
+ goto fail;
+ } else if (record_file != NULL) {
+ if (!start_charshunt(ttyfd, ttyfd))
+ goto fail;
+ }
- if (restore_term) {
-#ifndef SGTTY
- if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
- syslog(LOG_ERR, "tcsetattr: %m");
-#else
- if (ioctl(fd, TIOCSETP, &initsgttyb) < 0)
- syslog(LOG_ERR, "ioctl(TIOCSETP): %m");
-#endif
+ /* run connection script */
+ if (connector && connector[0]) {
+ MAINDEBUG(("Connecting with <%s>", connector));
+
+ if (real_ttyfd != -1) {
+ if (!default_device && modem) {
+ setdtr(real_ttyfd, 0); /* in case modem is off hook */
+ sleep(1);
+ setdtr(real_ttyfd, 1);
+ }
+ }
+
+ if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
+ error("Connect script failed");
+ goto fail;
+ }
+
+ info("Serial connection established.");
+
+ /* set line speed, flow control, etc.;
+ clear CLOCAL if modem option */
+ if (real_ttyfd != -1)
+ set_up_tty(real_ttyfd, 0);
}
- close(fd);
- fd = 0;
- }
+ /* reopen tty if necessary to wait for carrier */
+ if (connector == NULL && modem && devnam[0] != 0) {
+ for (;;) {
+ if ((i = open(devnam, O_RDWR)) >= 0)
+ break;
+ if (errno != EINTR)
+ error("Failed to reopen %s: %m", devnam);
+ if (!persist || errno != EINTR || hungup || kill_link)
+ goto fail;
+ }
+ close(i);
+ }
- if (pidfilename[0] != 0 && unlink(pidfilename) < 0)
- syslog(LOG_WARNING, "unable to unlink pid file: %m");
- pidfilename[0] = 0;
-}
+ slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
+ script_setenv("SPEED", numbuf);
+ /* run welcome script, if any */
+ if (welcomer && welcomer[0]) {
+ if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
+ warn("Welcome script failed");
+ }
-static struct callout *callout = NULL; /* Callout list */
-static struct timeval schedtime; /* Time last timeout was set */
+ /* set up the serial device as a ppp interface */
+ fd_ppp = establish_ppp(ttyfd);
+ if (fd_ppp < 0)
+ goto fail;
-/*
- * timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of seconds, NOT hz (as in
- * the kernel).
- */
-void
-timeout(func, arg, time)
- void (*func)();
- caddr_t arg;
- int time;
-{
- struct itimerval itv;
- struct callout *newp, **oldpp;
-
- MAINDEBUG((LOG_DEBUG, "Timeout %x:%x in %d seconds.",
- (int) func, (int) arg, time));
-
- /*
- * Allocate timeout.
- */
- if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL) {
- syslog(LOG_ERR, "Out of memory in timeout()!");
- die(1);
- }
- newp->c_arg = arg;
- newp->c_func = func;
-
- /*
- * Find correct place to link it in and decrement its time by the
- * amount of time used by preceding timeouts.
- */
- for (oldpp = &callout;
- *oldpp && (*oldpp)->c_time <= time;
- oldpp = &(*oldpp)->c_next)
- time -= (*oldpp)->c_time;
- newp->c_time = time;
- newp->c_next = *oldpp;
- if (*oldpp)
- (*oldpp)->c_time -= time;
- *oldpp = newp;
-
- /*
- * If this is now the first callout then we have to set a new
- * itimer.
- */
- if (callout == newp) {
- itv.it_interval.tv_sec = itv.it_interval.tv_usec =
- itv.it_value.tv_usec = 0;
- itv.it_value.tv_sec = callout->c_time;
- MAINDEBUG((LOG_DEBUG, "Setting itimer for %d seconds.",
- itv.it_value.tv_sec));
- if (setitimer(ITIMER_REAL, &itv, NULL)) {
- syslog(LOG_ERR, "setitimer(ITIMER_REAL): %m");
- die(1);
+ if (!demand) {
+
+ info("Using interface ppp%d", ifunit);
+ slprintf(ifname, sizeof(ifname), "ppp%d", ifunit);
+ script_setenv("IFNAME", ifname);
+
+ create_pidfile(); /* write pid to file */
}
- if (gettimeofday(&schedtime, NULL)) {
- syslog(LOG_ERR, "gettimeofday: %m");
- die(1);
+
+ /*
+ * Start opening the connection and wait for
+ * incoming events (reply, timeout, etc.).
+ */
+ notice("Connect: %s <--> %s", ifname, ppp_devnam);
+ gettimeofday(&start_time, NULL);
+ lcp_lowerup(0);
+
+ /*
+ * If we are initiating this connection, wait for a short
+ * time for something from the peer. This can avoid bouncing
+ * our packets off his tty before he has it set up.
+ */
+ if (connector != NULL || ptycommand != NULL) {
+ struct timeval t;
+ t.tv_sec = 1;
+ t.tv_usec = 0;
+ wait_input(&t);
+ }
+
+ lcp_open(0); /* Start protocol */
+ open_ccp_flag = 0;
+ add_fd(fd_ppp);
+ for (phase = PHASE_ESTABLISH; phase != PHASE_DEAD; ) {
+ if (sigsetjmp(sigjmp, 1) == 0) {
+ sigprocmask(SIG_BLOCK, &mask, NULL);
+ if (kill_link || open_ccp_flag) {
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ } else {
+ waiting = 1;
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ wait_input(timeleft(&timo));
+ }
+ }
+ waiting = 0;
+ calltimeout();
+ get_input();
+ if (kill_link) {
+ lcp_close(0, "User request");
+ kill_link = 0;
+ }
+ if (open_ccp_flag) {
+ if (phase == PHASE_NETWORK) {
+ ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
+ (*ccp_protent.open)(0);
+ }
+ open_ccp_flag = 0;
+ }
+ if (got_sigchld)
+ reap_kids(0); /* Don't leave dead kids lying around */
}
- }
-}
+ /*
+ * Print connect time and statistics.
+ */
+ if (gettimeofday(&now, NULL) >= 0) {
+ int t = now.tv_sec - start_time.tv_sec;
+ t = (t + 5) / 6; /* now in 1/10ths of minutes */
+ info("Connect time %d.%d minutes.", t/10, t%10);
+ }
+ if (link_stats_valid) {
+ info("Sent %d bytes, received %d bytes.",
+ link_stats.bytes_out, link_stats.bytes_in);
+ }
-/*
- * untimeout - Unschedule a timeout.
- */
-void
-untimeout(func, arg)
- void (*func)();
- caddr_t arg;
-{
- struct itimerval itv;
- struct callout **copp, *freep;
- int reschedule = 0;
-
- MAINDEBUG((LOG_DEBUG, "Untimeout %x:%x.", (int) func, (int) arg));
-
- /*
- * If the first callout is unscheduled then we have to set a new
- * itimer.
- */
- if (callout &&
- callout->c_func == func &&
- callout->c_arg == arg)
- reschedule = 1;
-
- /*
- * Find first matching timeout. Add its time to the next timeouts
- * time.
- */
- for (copp = &callout; *copp; copp = &(*copp)->c_next)
- if ((*copp)->c_func == func &&
- (*copp)->c_arg == arg) {
- freep = *copp;
- *copp = freep->c_next;
- if (*copp)
- (*copp)->c_time += freep->c_time;
- (void) free((char *) freep);
- break;
+ /*
+ * If we may want to bring the link up again, transfer
+ * the ppp unit back to the loopback. Set the
+ * real serial device back to its normal mode of operation.
+ */
+ remove_fd(fd_ppp);
+ clean_check();
+ if (demand)
+ restore_loop();
+ disestablish_ppp(ttyfd);
+ fd_ppp = -1;
+
+ /*
+ * Run disconnector script, if requested.
+ * XXX we may not be able to do this if the line has hung up!
+ */
+ if (disconnector && !hungup) {
+ if (real_ttyfd >= 0)
+ set_up_tty(real_ttyfd, 1);
+ if (device_script(disconnector, ttyfd, ttyfd, 0) < 0) {
+ warn("disconnect script failed");
+ } else {
+ info("Serial link disconnected.");
+ }
}
-
- if (reschedule) {
- itv.it_interval.tv_sec = itv.it_interval.tv_usec =
- itv.it_value.tv_usec = 0;
- itv.it_value.tv_sec = callout ? callout->c_time : 0;
- MAINDEBUG((LOG_DEBUG, "Setting itimer for %d seconds.",
- itv.it_value.tv_sec));
- if (setitimer(ITIMER_REAL, &itv, NULL)) {
- syslog(LOG_ERR, "setitimer(ITIMER_REAL): %m");
- die(1);
+ if (!hungup)
+ lcp_lowerdown(0);
+
+ fail:
+ if (pty_master >= 0)
+ close(pty_master);
+ if (pty_slave >= 0)
+ close(pty_slave);
+ if (real_ttyfd >= 0)
+ close_tty();
+ if (locked) {
+ unlock();
+ locked = 0;
+ }
+
+ if (!demand) {
+ if (pidfilename[0] != 0
+ && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file: %m");
+ pidfilename[0] = 0;
}
- if (gettimeofday(&schedtime, NULL)) {
- syslog(LOG_ERR, "gettimeofday: %m");
- die(1);
+
+ if (!persist)
+ break;
+
+ kill_link = 0;
+ if (demand)
+ demand_discard();
+ if (holdoff > 0 && need_holdoff) {
+ phase = PHASE_HOLDOFF;
+ TIMEOUT(holdoff_end, NULL, holdoff);
+ do {
+ if (sigsetjmp(sigjmp, 1) == 0) {
+ sigprocmask(SIG_BLOCK, &mask, NULL);
+ if (kill_link) {
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ } else {
+ waiting = 1;
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+ wait_input(timeleft(&timo));
+ }
+ }
+ waiting = 0;
+ calltimeout();
+ if (kill_link) {
+ kill_link = 0;
+ phase = PHASE_DORMANT; /* allow signal to end holdoff */
+ }
+ if (got_sigchld)
+ reap_kids(0);
+ } while (phase == PHASE_HOLDOFF);
+ if (!persist)
+ break;
}
}
-}
+ /* Wait for scripts to finish */
+ while (n_children > 0)
+ reap_kids(1);
+
+ die(0);
+ return 0;
+}
/*
- * adjtimeout - Decrement the first timeout by the amount of time since
- * it was scheduled.
+ * detach - detach us from the controlling terminal.
*/
void
-adjtimeout()
+detach()
{
- struct timeval tv;
- int timediff;
-
- if (callout == NULL)
+ if (detached)
return;
- /*
- * Make sure that the clock hasn't been warped dramatically.
- * Account for recently expired, but blocked timer by adding
- * small fudge factor.
- */
- if (gettimeofday(&tv, NULL)) {
- syslog(LOG_ERR, "gettimeofday: %m");
+ if (daemon(0, 0) < 0) {
+ perror("Couldn't detach from controlling terminal");
die(1);
}
- timediff = tv.tv_sec - schedtime.tv_sec;
- if (timediff < 0 ||
- timediff > callout->c_time + 1)
- return;
-
- callout->c_time -= timediff; /* OK, Adjust time */
+ detached = 1;
+ log_to_fd = -1;
+ pid = getpid();
+ /* update pid file if it has been written already */
+ if (pidfilename[0])
+ create_pidfile();
}
-
/*
- * hup - Catch SIGHUP signal.
- *
- * Indicates that the physical layer has been disconnected.
+ * reopen_log - (re)open our connection to syslog.
*/
-/*ARGSUSED*/
-static void
-hup(sig, code, scp, addr)
- int sig, code;
- struct sigcontext *scp;
- char *addr;
+void
+reopen_log()
{
- syslog(LOG_INFO, "Hangup (SIGHUP)");
-
- hungup = 1; /* they hung up on us! */
- persist = 0; /* don't try to restart */
- adjtimeout(); /* Adjust timeouts */
- lcp_lowerdown(0); /* Reset connection */
- quit(); /* and die */
+#ifdef ULTRIX
+ openlog("pppd", LOG_PID);
+#else
+ openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
+ setlogmask(LOG_UPTO(LOG_INFO));
+#endif
}
-
/*
- * term - Catch SIGTERM signal.
- *
- * Indicates that we should initiate a graceful disconnect and exit.
+ * Create a file containing our process ID.
*/
-/*ARGSUSED*/
static void
-term(sig, code, scp, addr)
- int sig, code;
- struct sigcontext *scp;
- char *addr;
+create_pidfile()
{
- syslog(LOG_INFO, "Terminating link.");
- persist = 0; /* don't try to restart */
- adjtimeout(); /* Adjust timeouts */
- lcp_close(0); /* Close connection */
-}
+ FILE *pidfile;
+ char numbuf[16];
+ slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
+ _PATH_VARRUN, ifname);
+ if ((pidfile = fopen(pidfilename, "w")) != NULL) {
+ fprintf(pidfile, "%d\n", pid);
+ (void) fclose(pidfile);
+ } else {
+ error("Failed to create pid file %s: %m", pidfilename);
+ pidfilename[0] = 0;
+ }
+ slprintf(numbuf, sizeof(numbuf), "%d", pid);
+ script_setenv("PPPD_PID", numbuf);
+}
/*
- * intr - Catch SIGINT signal (DEL/^C).
- *
- * Indicates that we should initiate a graceful disconnect and exit.
+ * holdoff_end - called via a timeout when the holdoff period ends.
*/
-/*ARGSUSED*/
static void
-intr(sig, code, scp, addr)
- int sig, code;
- struct sigcontext *scp;
- char *addr;
+holdoff_end(arg)
+ void *arg;
{
- syslog(LOG_INFO, "Interrupt received: terminating link");
- persist = 0; /* don't try to restart */
- adjtimeout(); /* Adjust timeouts */
- lcp_close(0); /* Close connection */
+ phase = PHASE_DORMANT;
}
-
/*
- * alrm - Catch SIGALRM signal.
- *
- * Indicates a timeout.
+ * get_input - called when incoming data is available.
*/
-/*ARGSUSED*/
static void
-alrm(sig, code, scp, addr)
- int sig, code;
- struct sigcontext *scp;
- char *addr;
+get_input()
{
- struct itimerval itv;
- struct callout *freep;
+ int len, i;
+ u_char *p;
+ u_short protocol;
+ struct protent *protp;
+
+ p = inpacket_buf; /* point to beginning of packet buffer */
+
+ len = read_packet(inpacket_buf);
+ if (len < 0)
+ return;
+
+ if (len == 0) {
+ notice("Modem hangup");
+ hungup = 1;
+ lcp_lowerdown(0); /* serial link is no longer available */
+ link_terminated(0);
+ return;
+ }
+
+ if (debug /*&& (debugflags & DBG_INPACKET)*/)
+ dbglog("rcvd %P", p, len);
+
+ if (len < PPP_HDRLEN) {
+ MAINDEBUG(("io(): Received short packet."));
+ return;
+ }
- MAINDEBUG((LOG_DEBUG, "Alarm"));
+ p += 2; /* Skip address and control */
+ GETSHORT(protocol, p);
+ len -= PPP_HDRLEN;
/*
- * Call and free first scheduled timeout and any that were scheduled
- * for the same time.
+ * Toss all non-LCP packets unless LCP is OPEN.
*/
- while (callout) {
- freep = callout; /* Remove entry before calling */
- callout = freep->c_next;
- (*freep->c_func)(freep->c_arg);
- (void) free((char *) freep);
- if (callout && callout->c_time)
- break;
+ if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
+ MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
+ return;
}
-
+
+ /*
+ * Until we get past the authentication phase, toss all packets
+ * except LCP, LQR and authentication packets.
+ */
+ if (phase <= PHASE_AUTHENTICATE
+ && !(protocol == PPP_LCP || protocol == PPP_LQR
+ || protocol == PPP_PAP || protocol == PPP_CHAP)) {
+ MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
+ protocol, phase));
+ return;
+ }
+
/*
- * Set a new itimer if there are more timeouts scheduled.
+ * Upcall the proper protocol input routine.
*/
- if (callout) {
- itv.it_interval.tv_sec = itv.it_interval.tv_usec = 0;
- itv.it_value.tv_usec = 0;
- itv.it_value.tv_sec = callout->c_time;
- MAINDEBUG((LOG_DEBUG, "Setting itimer for %d seconds.",
- itv.it_value.tv_sec));
- if (setitimer(ITIMER_REAL, &itv, NULL)) {
- syslog(LOG_ERR, "setitimer(ITIMER_REAL): %m");
- die(1);
+ for (i = 0; (protp = protocols[i]) != NULL; ++i) {
+ if (protp->protocol == protocol && protp->enabled_flag) {
+ (*protp->input)(0, p, len);
+ return;
}
- if (gettimeofday(&schedtime, NULL)) {
- syslog(LOG_ERR, "gettimeofday: %m");
- die(1);
+ if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag
+ && protp->datainput != NULL) {
+ (*protp->datainput)(0, p, len);
+ return;
}
}
+
+ if (debug)
+ warn("Unsupported protocol (0x%x) received", protocol);
+ lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
}
/*
- * io - Catch SIGIO signal.
- *
- * Indicates that incoming data is available.
+ * die - clean up state and exit with the specified status.
*/
-/*ARGSUSED*/
+void
+die(status)
+ int status;
+{
+ cleanup();
+ syslog(LOG_INFO, "Exit.");
+ exit(status);
+}
+
+/*
+ * cleanup - restore anything which needs to be restored before we exit
+ */
+/* ARGSUSED */
static void
-io(sig, code, scp, addr)
- int sig, code;
- struct sigcontext *scp;
- char *addr;
+cleanup()
{
- int len, i;
- u_char *p;
- u_short protocol;
- fd_set fdset;
- struct timeval notime;
- int ready;
+ sys_cleanup();
- MAINDEBUG((LOG_DEBUG, "IO signal received"));
- adjtimeout(); /* Adjust timeouts */
+ if (fd_ppp >= 0)
+ disestablish_ppp(ttyfd);
+ if (real_ttyfd >= 0)
+ close_tty();
- /* we do this to see if the SIGIO handler is being invoked for input */
- /* ready, or for the socket buffer hitting the low-water mark. */
+ if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
+ warn("unable to delete pid file: %m");
+ pidfilename[0] = 0;
- notime.tv_sec = 0;
- notime.tv_usec = 0;
- FD_ZERO(&fdset);
- FD_SET(fd, &fdset);
-
- if ((ready = select(32, &fdset, (fd_set *) NULL, (fd_set *) NULL,
- ¬ime)) == -1) {
- syslog(LOG_ERR, "Error in io() select: %m");
- die(1);
- }
-
- if (ready == 0) {
- MAINDEBUG((LOG_DEBUG, "IO non-input ready SIGIO occured."));
- return;
- }
+ if (locked)
+ unlock();
+}
- /* Yup, this is for real */
- for (;;) { /* Read all available packets */
- p = inpacket_buf; /* point to beginning of packet buffer */
+/*
+ * close_tty - restore the terminal device and close it.
+ */
+static void
+close_tty()
+{
+ /* drop dtr to hang up */
+ if (!default_device && modem) {
+ setdtr(real_ttyfd, 0);
+ /*
+ * This sleep is in case the serial port has CLOCAL set by default,
+ * and consequently will reassert DTR when we close the device.
+ */
+ sleep(1);
+ }
- len = read_packet(inpacket_buf);
- if (len < 0)
- return;
+ restore_tty(real_ttyfd);
- if (len == 0) {
- syslog(LOG_ERR, "End of file on fd!");
- die(1);
+ if (tty_mode != (mode_t) -1) {
+ if (fchmod(real_ttyfd, tty_mode) != 0) {
+ /* XXX if devnam is a symlink, this will change the link */
+ chmod(devnam, tty_mode);
}
+ }
- if (len < DLLHEADERLEN) {
- MAINDEBUG((LOG_INFO, "io(): Received short packet."));
- return;
- }
+ close(real_ttyfd);
+ real_ttyfd = -1;
+}
- p += 2; /* Skip address and control */
- GETSHORT(protocol, p);
- len -= DLLHEADERLEN;
- /*
- * Toss all non-LCP packets unless LCP is OPEN.
- */
- if (protocol != LCP && lcp_fsm[0].state != OPENED) {
- MAINDEBUG((LOG_INFO,
- "io(): Received non-LCP packet when LCP not open."));
- if (debug)
- dumpbuffer(inpacket_buf, len + DLLHEADERLEN, LOG_INFO);
- return;
- }
+struct callout {
+ struct timeval c_time; /* time at which to call routine */
+ void *c_arg; /* argument to routine */
+ void (*c_func) __P((void *)); /* routine */
+ struct callout *c_next;
+};
- /*
- * Upcall the proper protocol input routine.
- */
- for (i = 0; i < sizeof (prottbl) / sizeof (struct protent); i++)
- if (prottbl[i].protocol == protocol) {
- (*prottbl[i].input)(0, p, len);
- break;
- }
+static struct callout *callout = NULL; /* Callout list */
+static struct timeval timenow; /* Current time */
- if (i == sizeof (prottbl) / sizeof (struct protent)) {
- syslog(LOG_WARNING, "input: Unknown protocol (%x) received!",
- protocol);
- lcp_sprotrej(0, p - DLLHEADERLEN, len + DLLHEADERLEN);
- }
- }
+/*
+ * timeout - Schedule a timeout.
+ *
+ * Note that this timeout takes the number of seconds, NOT hz (as in
+ * the kernel).
+ */
+void
+timeout(func, arg, time)
+ void (*func) __P((void *));
+ void *arg;
+ int time;
+{
+ struct callout *newp, *p, **pp;
+
+ MAINDEBUG(("Timeout %p:%p in %d seconds.", func, arg, time));
+
+ /*
+ * Allocate timeout.
+ */
+ if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL)
+ fatal("Out of memory in timeout()!");
+ newp->c_arg = arg;
+ newp->c_func = func;
+ gettimeofday(&timenow, NULL);
+ newp->c_time.tv_sec = timenow.tv_sec + time;
+ newp->c_time.tv_usec = timenow.tv_usec;
+
+ /*
+ * Find correct place and link it in.
+ */
+ for (pp = &callout; (p = *pp); pp = &p->c_next)
+ if (newp->c_time.tv_sec < p->c_time.tv_sec
+ || (newp->c_time.tv_sec == p->c_time.tv_sec
+ && newp->c_time.tv_usec < p->c_time.tv_usec))
+ break;
+ newp->c_next = p;
+ *pp = newp;
}
+
/*
- * demuxprotrej - Demultiplex a Protocol-Reject.
+ * untimeout - Unschedule a timeout.
*/
void
-demuxprotrej(unit, protocol)
- int unit;
- u_short protocol;
+untimeout(func, arg)
+ void (*func) __P((void *));
+ void *arg;
{
- int i;
-
+ struct callout **copp, *freep;
+
+ MAINDEBUG(("Untimeout %p:%p.", func, arg));
+
/*
- * Upcall the proper Protocol-Reject routine.
+ * Find first matching timeout and remove it from the list.
*/
- for (i = 0; i < sizeof (prottbl) / sizeof (struct protent); i++)
- if (prottbl[i].protocol == protocol) {
- (*prottbl[i].protrej)(unit);
- return;
+ for (copp = &callout; (freep = *copp); copp = &freep->c_next)
+ if (freep->c_func == func && freep->c_arg == arg) {
+ *copp = freep->c_next;
+ (void) free((char *) freep);
+ break;
}
+}
+
- syslog(LOG_WARNING,
- "demuxprotrej: Unrecognized Protocol-Reject for protocol %d!",
- protocol);
+/*
+ * calltimeout - Call any timeout routines which are now due.
+ */
+static void
+calltimeout()
+{
+ struct callout *p;
+
+ while (callout != NULL) {
+ p = callout;
+
+ if (gettimeofday(&timenow, NULL) < 0)
+ fatal("Failed to get time of day: %m");
+ if (!(p->c_time.tv_sec < timenow.tv_sec
+ || (p->c_time.tv_sec == timenow.tv_sec
+ && p->c_time.tv_usec <= timenow.tv_usec)))
+ break; /* no, it's not time yet */
+
+ callout = p->c_next;
+ (*p->c_func)(p->c_arg);
+
+ free((char *) p);
+ }
+}
+
+
+/*
+ * timeleft - return the length of time until the next timeout is due.
+ */
+static struct timeval *
+timeleft(tvp)
+ struct timeval *tvp;
+{
+ if (callout == NULL)
+ return NULL;
+
+ gettimeofday(&timenow, NULL);
+ tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec;
+ tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec;
+ if (tvp->tv_usec < 0) {
+ tvp->tv_usec += 1000000;
+ tvp->tv_sec -= 1;
+ }
+ if (tvp->tv_sec < 0)
+ tvp->tv_sec = tvp->tv_usec = 0;
+
+ return tvp;
+}
+
+
+/*
+ * kill_my_pg - send a signal to our process group, and ignore it ourselves.
+ */
+static void
+kill_my_pg(sig)
+ int sig;
+{
+ struct sigaction act, oldact;
+
+ act.sa_handler = SIG_IGN;
+ act.sa_flags = 0;
+ kill(0, sig);
+ sigaction(sig, &act, &oldact);
+ sigaction(sig, &oldact, NULL);
}
/*
- * incdebug - Catch SIGUSR1 signal.
+ * hup - Catch SIGHUP signal.
*
- * Increment debug flag.
+ * Indicates that the physical layer has been disconnected.
+ * We don't rely on this indication; if the user has sent this
+ * signal, we just take the link down.
*/
-/*ARGSUSED*/
static void
-incdebug(sig)
+hup(sig)
int sig;
{
- syslog(LOG_INFO, "Debug turned ON, Level %d", debug);
- setlogmask(LOG_UPTO(LOG_DEBUG));
- debug++;
+ info("Hangup (SIGHUP)");
+ kill_link = 1;
+ if (conn_running)
+ /* Send the signal to the [dis]connector process(es) also */
+ kill_my_pg(sig);
+ if (charshunt_pid)
+ kill(charshunt_pid, sig);
+ if (waiting)
+ siglongjmp(sigjmp, 1);
}
/*
- * nodebug - Catch SIGUSR2 signal.
+ * term - Catch SIGTERM signal and SIGINT signal (^C/del).
*
- * Turn off debugging.
+ * Indicates that we should initiate a graceful disconnect and exit.
*/
/*ARGSUSED*/
static void
-nodebug(sig)
+term(sig)
int sig;
{
- setlogmask(LOG_UPTO(LOG_WARNING));
- debug = 0;
+ info("Terminating on signal %d.", sig);
+ persist = 0; /* don't try to restart */
+ kill_link = 1;
+ if (conn_running)
+ /* Send the signal to the [dis]connector process(es) also */
+ kill_my_pg(sig);
+ if (charshunt_pid)
+ kill(charshunt_pid, sig);
+ if (waiting)
+ siglongjmp(sigjmp, 1);
}
/*
- * set_up_connection - run a program to initialize the serial connector
+ * chld - Catch SIGCHLD signal.
+ * Sets a flag so we will call reap_kids in the mainline.
*/
-int
-set_up_connection(program, in, out)
+static void
+chld(sig)
+ int sig;
+{
+ got_sigchld = 1;
+ if (waiting)
+ siglongjmp(sigjmp, 1);
+}
+
+
+/*
+ * toggle_debug - Catch SIGUSR1 signal.
+ *
+ * Toggle debug flag.
+ */
+/*ARGSUSED*/
+static void
+toggle_debug(sig)
+ int sig;
+{
+ debug = !debug;
+ if (debug) {
+ setlogmask(LOG_UPTO(LOG_DEBUG));
+ } else {
+ setlogmask(LOG_UPTO(LOG_WARNING));
+ }
+}
+
+
+/*
+ * open_ccp - Catch SIGUSR2 signal.
+ *
+ * Try to (re)negotiate compression.
+ */
+/*ARGSUSED*/
+static void
+open_ccp(sig)
+ int sig;
+{
+ open_ccp_flag = 1;
+ if (waiting)
+ siglongjmp(sigjmp, 1);
+}
+
+
+/*
+ * bad_signal - We've caught a fatal signal. Clean up state and exit.
+ */
+static void
+bad_signal(sig)
+ int sig;
+{
+ static int crashed = 0;
+
+ if (crashed)
+ _exit(127);
+ crashed = 1;
+ error("Fatal signal %d", sig);
+ if (conn_running)
+ kill_my_pg(SIGTERM);
+ if (charshunt_pid)
+ kill(charshunt_pid, SIGTERM);
+ die(1);
+}
+
+
+/*
+ * device_script - run a program to talk to the serial device
+ * (e.g. to run the connector or disconnector script).
+ */
+static int
+device_script(program, in, out, dont_wait)
char *program;
int in, out;
+ int dont_wait;
{
int pid;
- int status;
- sigset_t mask;
-
- sigemptyset(&mask);
- sigaddset(&mask, SIGINT);
- sigaddset(&mask, SIGHUP);
- sigprocmask(SIG_BLOCK, &mask, &mask);
+ int status = 0;
+ int errfd;
+ ++conn_running;
pid = fork();
-
+
if (pid < 0) {
- syslog(LOG_ERR, "fork: %m");
- die(1);
+ --conn_running;
+ error("Failed to create child process: %m");
+ return -1;
}
-
+
if (pid == 0) {
- setreuid(getuid(), getuid());
- setregid(getgid(), getgid());
- sigprocmask(SIG_SETMASK, &mask, NULL);
- dup2(in, 0);
- dup2(out, 1);
+ sys_close();
+ closelog();
+ if (in == 2) {
+ /* aargh!!! */
+ int newin = dup(in);
+ if (in == out)
+ out = newin;
+ in = newin;
+ } else if (out == 2) {
+ out = dup(out);
+ }
+ if (log_to_fd >= 0) {
+ if (log_to_fd != 2)
+ dup2(log_to_fd, 2);
+ } else {
+ close(2);
+ errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
+ if (errfd >= 0 && errfd != 2) {
+ dup2(errfd, 2);
+ close(errfd);
+ }
+ }
+ if (in != 0) {
+ if (out == 0)
+ out = dup(out);
+ dup2(in, 0);
+ if (in > 2)
+ close(in);
+ }
+ if (out != 1) {
+ dup2(out, 1);
+ if (out > 2)
+ close(out);
+ }
+ if (real_ttyfd > 2)
+ close(real_ttyfd);
+ if (pty_master > 2)
+ close(pty_master);
+ if (pty_slave > 2)
+ close(pty_slave);
+ setuid(uid);
+ if (getuid() != uid) {
+ error("setuid failed");
+ exit(1);
+ }
+ setgid(getgid());
execl("/bin/sh", "sh", "-c", program, (char *)0);
- syslog(LOG_ERR, "could not exec /bin/sh: %m");
- _exit(99);
+ error("could not exec /bin/sh: %m");
+ exit(99);
/* NOTREACHED */
}
- while (waitpid(pid, &status, 0) != pid) {
- if (errno == EINTR)
- continue;
- syslog(LOG_ERR, "waiting for connection process: %m");
- die(1);
+ if (dont_wait) {
+ record_child(pid, program, NULL, NULL);
+ } else {
+ while (waitpid(pid, &status, 0) < 0) {
+ if (errno == EINTR)
+ continue;
+ fatal("error waiting for (dis)connection process: %m");
+ }
+ --conn_running;
}
- sigprocmask(SIG_SETMASK, &mask, NULL);
return (status == 0 ? 0 : -1);
}
/*
- * Return user specified netmask. A value of zero means no netmask has
- * been set.
+ * We maintain a list of child process pids and
+ * functions to call when they exit.
*/
-/* ARGSUSED */
-u_long
-GetMask(addr)
- u_long addr;
+struct subprocess {
+ pid_t pid;
+ char *prog;
+ void (*done) __P((void *));
+ void *arg;
+ struct subprocess *next;
+};
+
+struct subprocess *children;
+
+/*
+ * run-program - execute a program with given arguments,
+ * but don't wait for it.
+ * If the program can't be executed, logs an error unless
+ * must_exist is 0 and the program file doesn't exist.
+ * Returns -1 if it couldn't fork, 0 if the file doesn't exist
+ * or isn't an executable plain file, or the process ID of the child.
+ * If done != NULL, (*done)(arg) will be called later (within
+ * reap_kids) iff the return value is > 0.
+ */
+pid_t
+run_program(prog, args, must_exist, done, arg)
+ char *prog;
+ char **args;
+ int must_exist;
+ void (*done) __P((void *));
+ void *arg;
{
- return(netmask);
+ int pid;
+ struct stat sbuf;
+
+ /*
+ * First check if the file exists and is executable.
+ * We don't use access() because that would use the
+ * real user-id, which might not be root, and the script
+ * might be accessible only to root.
+ */
+ errno = EINVAL;
+ if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode)
+ || (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) {
+ if (must_exist || errno != ENOENT)
+ warn("Can't execute %s: %m", prog);
+ return 0;
+ }
+
+ pid = fork();
+ if (pid == -1) {
+ error("Failed to create child process for %s: %m", prog);
+ return -1;
+ }
+ if (pid == 0) {
+ int new_fd;
+
+ /* Leave the current location */
+ (void) setsid(); /* No controlling tty. */
+ (void) umask (S_IRWXG|S_IRWXO);
+ (void) chdir ("/"); /* no current directory. */
+ setuid(0); /* set real UID = root */
+ setgid(getegid());
+
+ /* Ensure that nothing of our device environment is inherited. */
+ sys_close();
+ closelog();
+ close (0);
+ close (1);
+ close (2);
+ close (ttyfd); /* tty interface to the ppp device */
+ if (real_ttyfd >= 0)
+ close(real_ttyfd);
+
+ /* Don't pass handles to the PPP device, even by accident. */
+ new_fd = open (_PATH_DEVNULL, O_RDWR);
+ if (new_fd >= 0) {
+ if (new_fd != 0) {
+ dup2 (new_fd, 0); /* stdin <- /dev/null */
+ close (new_fd);
+ }
+ dup2 (0, 1); /* stdout -> /dev/null */
+ dup2 (0, 2); /* stderr -> /dev/null */
+ }
+
+#ifdef BSD
+ /* Force the priority back to zero if pppd is running higher. */
+ if (setpriority (PRIO_PROCESS, 0, 0) < 0)
+ warn("can't reset priority to 0: %m");
+#endif
+
+ /* SysV recommends a second fork at this point. */
+
+ /* run the program */
+ execve(prog, args, script_env);
+ if (must_exist || errno != ENOENT) {
+ /* have to reopen the log, there's nowhere else
+ for the message to go. */
+ reopen_log();
+ syslog(LOG_ERR, "Can't execute %s: %m", prog);
+ closelog();
+ }
+ _exit(-1);
+ }
+
+ if (debug)
+ dbglog("Script %s started; pid = %d", prog, pid);
+ record_child(pid, prog, done, arg);
+
+ return pid;
}
+
/*
- * dumpbuffer - print contents of a buffer in hex to standard output.
+ * record_child - add a child process to the list for reap_kids
+ * to use.
*/
-void
-dumpbuffer(buffer, size, level)
- unsigned char *buffer;
- int size;
- int level;
+static void
+record_child(pid, prog, done, arg)
+ int pid;
+ char *prog;
+ void (*done) __P((void *));
+ void *arg;
{
- register int i;
- char line[256], *p;
-
- printf("%d bytes:\n", size);
- while (size > 0)
- {
- p = line;
- sprintf(p, "%08lx: ", buffer);
- p += 10;
-
- for (i = 0; i < 8; i++, p += 3)
- if (size - i <= 0)
- sprintf(p, "xx ");
- else
- sprintf(p, "%02x ", buffer[i]);
-
- for (i = 0; i < 8; i++)
- if (size - i <= 0)
- *p++ = 'x';
- else
- *p++ = (' ' <= buffer[i] && buffer[i] <= '~') ?
- buffer[i] : '.';
-
- *p++ = 0;
- buffer += 8;
- size -= 8;
-
-/* syslog(level, "%s\n", line); */
- printf("%s\n", line);
- fflush(stdout);
+ struct subprocess *chp;
+
+ ++n_children;
+
+ chp = (struct subprocess *) malloc(sizeof(struct subprocess));
+ if (chp == NULL) {
+ warn("losing track of %s process", prog);
+ } else {
+ chp->pid = pid;
+ chp->prog = prog;
+ chp->done = done;
+ chp->arg = arg;
+ chp->next = children;
+ children = chp;
}
}
/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
+ * reap_kids - get status from any dead child processes,
+ * and log a message for abnormal terminations.
*/
-setdtr(fd, on)
-int fd, on;
+static void
+reap_kids(waitfor)
+ int waitfor;
{
- int modembits = TIOCM_DTR;
+ int pid, status;
+ struct subprocess *chp, **prevp;
- ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
+ got_sigchld = 0;
+ if (n_children == 0)
+ return;
+ while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
+ && pid != 0) {
+ --n_children;
+ for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next)
+ if (chp->pid == pid)
+ break;
+ if (WIFSIGNALED(status)) {
+ warn("Child process %s (pid %d) terminated with signal %d",
+ (chp? chp->prog: "??"), pid, WTERMSIG(status));
+ } else if (debug)
+ dbglog("process %d (%s) finished, status = 0x%x",
+ pid, (chp? chp->prog: "??"), status);
+ if (chp && chp->done)
+ (*chp->done)(chp->arg);
+ }
+ if (pid == -1 && errno != ECHILD && errno != EINTR)
+ error("Error waiting for child process: %m");
}
-#include <varargs.h>
-char line[256];
-char *p;
+/*
+ * log_packet - format a packet and log it.
+ */
-logf(level, fmt, va_alist)
-int level;
-char *fmt;
-va_dcl
+char line[256]; /* line to be logged accumulated here */
+char *linep;
+
+void
+log_packet(p, len, prefix, level)
+ u_char *p;
+ int len;
+ char *prefix;
+ int level;
+{
+ strlcpy(line, prefix, sizeof(line));
+ linep = line + strlen(line);
+ format_packet(p, len, pr_log, NULL);
+ if (linep != line)
+ syslog(level, "%s", line);
+}
+
+/*
+ * format_packet - make a readable representation of a packet,
+ * calling `printer(arg, format, ...)' to output it.
+ */
+static void
+format_packet(p, len, printer, arg)
+ u_char *p;
+ int len;
+ void (*printer) __P((void *, char *, ...));
+ void *arg;
+{
+ int i, n;
+ u_short proto;
+ struct protent *protp;
+
+ if (len >= PPP_HDRLEN && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
+ p += 2;
+ GETSHORT(proto, p);
+ len -= PPP_HDRLEN;
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ if (proto == protp->protocol)
+ break;
+ if (protp != NULL) {
+ printer(arg, "[%s", protp->name);
+ n = (*protp->printpkt)(p, len, printer, arg);
+ printer(arg, "]");
+ p += n;
+ len -= n;
+ } else {
+ for (i = 0; (protp = protocols[i]) != NULL; ++i)
+ if (proto == (protp->protocol & ~0x8000))
+ break;
+ if (protp != 0 && protp->data_name != 0) {
+ printer(arg, "[%s data]", protp->data_name);
+ if (len > 8)
+ printer(arg, "%.8B ...", p);
+ else
+ printer(arg, "%.*B", len, p);
+ len = 0;
+ } else
+ printer(arg, "[proto=0x%x]", proto);
+ }
+ }
+
+ if (len > 32)
+ printer(arg, "%.32B ...", p);
+ else
+ printer(arg, "%.*B", len, p);
+}
+
+static void
+pr_log __V((void *arg, char *fmt, ...))
{
+ int n;
va_list pvar;
char buf[256];
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ void *arg;
+ char *fmt;
va_start(pvar);
- vsprintf(buf, fmt, pvar);
+ arg = va_arg(pvar, void *);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ n = vslprintf(buf, sizeof(buf), fmt, pvar);
va_end(pvar);
- p = line + strlen(line);
- strcat(p, buf);
+ if (linep + n + 1 > line + sizeof(line)) {
+ syslog(LOG_DEBUG, "%s", line);
+ linep = line;
+ }
+ strlcpy(linep, buf, line + sizeof(line) - linep);
+ linep += n;
+}
- if (buf[strlen(buf)-1] == '\n') {
- syslog(level, "%s", line);
- line[0] = 0;
+/*
+ * vslp_printer - used in processing a %P format
+ */
+struct buffer_info {
+ char *ptr;
+ int len;
+};
+
+static void
+vslp_printer __V((void *arg, char *fmt, ...))
+{
+ int n;
+ va_list pvar;
+ struct buffer_info *bi;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ void *arg;
+ char *fmt;
+ va_start(pvar);
+ arg = va_arg(pvar, void *);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ bi = (struct buffer_info *) arg;
+ n = vslprintf(bi->ptr, bi->len, fmt, pvar);
+ va_end(pvar);
+
+ bi->ptr += n;
+ bi->len -= n;
+}
+
+/*
+ * print_string - print a readable representation of a string using
+ * printer.
+ */
+void
+print_string(p, len, printer, arg)
+ char *p;
+ int len;
+ void (*printer) __P((void *, char *, ...));
+ void *arg;
+{
+ int c;
+
+ printer(arg, "\"");
+ for (; len > 0; --len) {
+ c = *p++;
+ if (' ' <= c && c <= '~') {
+ if (c == '\\' || c == '"')
+ printer(arg, "\\");
+ printer(arg, "%c", c);
+ } else {
+ switch (c) {
+ case '\n':
+ printer(arg, "\\n");
+ break;
+ case '\r':
+ printer(arg, "\\r");
+ break;
+ case '\t':
+ printer(arg, "\\t");
+ break;
+ default:
+ printer(arg, "\\%.3o", c);
+ }
+ }
}
+ printer(arg, "\"");
}
+/*
+ * novm - log an error message saying we ran out of memory, and die.
+ */
void
novm(msg)
char *msg;
{
- syslog(LOG_ERR, "Virtual memory exhausted allocating %s\n", msg);
- die(1);
+ fatal("Virtual memory exhausted allocating %s\n", msg);
+}
+
+/*
+ * slprintf - format a message into a buffer. Like sprintf except we
+ * also specify the length of the output buffer, and we handle
+ * %r (recursive format), %m (error message), %v (visible string),
+ * %q (quoted string), %t (current time) and %I (IP address) formats.
+ * Doesn't do floating-point formats.
+ * Returns the number of chars put into buf.
+ */
+int
+slprintf __V((char *buf, int buflen, char *fmt, ...))
+{
+ va_list args;
+ int n;
+
+#if __STDC__
+ va_start(args, fmt);
+#else
+ char *buf;
+ int buflen;
+ char *fmt;
+ va_start(args);
+ buf = va_arg(args, char *);
+ buflen = va_arg(args, int);
+ fmt = va_arg(args, char *);
+#endif
+ n = vslprintf(buf, buflen, fmt, args);
+ va_end(args);
+ return n;
+}
+
+/*
+ * vslprintf - like slprintf, takes a va_list instead of a list of args.
+ */
+#define OUTCHAR(c) (buflen > 0? (--buflen, *buf++ = (c)): 0)
+
+int
+vslprintf(buf, buflen, fmt, args)
+ char *buf;
+ int buflen;
+ char *fmt;
+ va_list args;
+{
+ int c, i, n;
+ int width, prec, fillch;
+ int base, len, neg, quoted;
+ unsigned long val = 0;
+ char *str, *f, *buf0;
+ unsigned char *p;
+ char num[32];
+ time_t t;
+ u_int32_t ip;
+ static char hexchars[] = "0123456789abcdef";
+ struct buffer_info bufinfo;
+
+ buf0 = buf;
+ --buflen;
+ while (buflen > 0) {
+ for (f = fmt; *f != '%' && *f != 0; ++f)
+ ;
+ if (f > fmt) {
+ len = f - fmt;
+ if (len > buflen)
+ len = buflen;
+ memcpy(buf, fmt, len);
+ buf += len;
+ buflen -= len;
+ fmt = f;
+ }
+ if (*fmt == 0)
+ break;
+ c = *++fmt;
+ width = prec = 0;
+ fillch = ' ';
+ if (c == '0') {
+ fillch = '0';
+ c = *++fmt;
+ }
+ if (c == '*') {
+ width = va_arg(args, int);
+ c = *++fmt;
+ } else {
+ while (isdigit(c)) {
+ width = width * 10 + c - '0';
+ c = *++fmt;
+ }
+ }
+ if (c == '.') {
+ c = *++fmt;
+ if (c == '*') {
+ prec = va_arg(args, int);
+ c = *++fmt;
+ } else {
+ while (isdigit(c)) {
+ prec = prec * 10 + c - '0';
+ c = *++fmt;
+ }
+ }
+ }
+ str = 0;
+ base = 0;
+ neg = 0;
+ ++fmt;
+ switch (c) {
+ case 'd':
+ i = va_arg(args, int);
+ if (i < 0) {
+ neg = 1;
+ val = -i;
+ } else
+ val = i;
+ base = 10;
+ break;
+ case 'o':
+ val = va_arg(args, unsigned int);
+ base = 8;
+ break;
+ case 'x':
+ case 'X':
+ val = va_arg(args, unsigned int);
+ base = 16;
+ break;
+ case 'p':
+ val = (unsigned long) va_arg(args, void *);
+ base = 16;
+ neg = 2;
+ break;
+ case 's':
+ str = va_arg(args, char *);
+ break;
+ case 'c':
+ num[0] = va_arg(args, int);
+ num[1] = 0;
+ str = num;
+ break;
+ case 'm':
+ str = strerror(errno);
+ break;
+ case 'I':
+ ip = va_arg(args, u_int32_t);
+ ip = ntohl(ip);
+ slprintf(num, sizeof(num), "%d.%d.%d.%d", (ip >> 24) & 0xff,
+ (ip >> 16) & 0xff, (ip >> 8) & 0xff, ip & 0xff);
+ str = num;
+ break;
+ case 'r':
+ f = va_arg(args, char *);
+#ifndef __powerpc__
+ n = vslprintf(buf, buflen + 1, f, va_arg(args, va_list));
+#else
+ /* On the powerpc, a va_list is an array of 1 structure */
+ n = vslprintf(buf, buflen + 1, f, va_arg(args, void *));
+#endif
+ buf += n;
+ buflen -= n;
+ continue;
+ case 't':
+ time(&t);
+ str = ctime(&t);
+ str += 4; /* chop off the day name */
+ str[15] = 0; /* chop off year and newline */
+ break;
+ case 'v': /* "visible" string */
+ case 'q': /* quoted string */
+ quoted = c == 'q';
+ p = va_arg(args, unsigned char *);
+ if (fillch == '0' && prec > 0) {
+ n = prec;
+ } else {
+ n = strlen((char *)p);
+ if (prec > 0 && prec < n)
+ n = prec;
+ }
+ while (n > 0 && buflen > 0) {
+ c = *p++;
+ --n;
+ if (!quoted && c >= 0x80) {
+ OUTCHAR('M');
+ OUTCHAR('-');
+ c -= 0x80;
+ }
+ if (quoted && (c == '"' || c == '\\'))
+ OUTCHAR('\\');
+ if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
+ if (quoted) {
+ OUTCHAR('\\');
+ switch (c) {
+ case '\t': OUTCHAR('t'); break;
+ case '\n': OUTCHAR('n'); break;
+ case '\b': OUTCHAR('b'); break;
+ case '\f': OUTCHAR('f'); break;
+ default:
+ OUTCHAR('x');
+ OUTCHAR(hexchars[c >> 4]);
+ OUTCHAR(hexchars[c & 0xf]);
+ }
+ } else {
+ if (c == '\t')
+ OUTCHAR(c);
+ else {
+ OUTCHAR('^');
+ OUTCHAR(c ^ 0x40);
+ }
+ }
+ } else
+ OUTCHAR(c);
+ }
+ continue;
+ case 'P': /* print PPP packet */
+ bufinfo.ptr = buf;
+ bufinfo.len = buflen + 1;
+ p = va_arg(args, unsigned char *);
+ n = va_arg(args, int);
+ format_packet(p, n, vslp_printer, &bufinfo);
+ buf = bufinfo.ptr;
+ buflen = bufinfo.len - 1;
+ continue;
+ case 'B':
+ p = va_arg(args, unsigned char *);
+ for (n = prec; n > 0; --n) {
+ c = *p++;
+ if (fillch == ' ')
+ OUTCHAR(' ');
+ OUTCHAR(hexchars[(c >> 4) & 0xf]);
+ OUTCHAR(hexchars[c & 0xf]);
+ }
+ continue;
+ default:
+ *buf++ = '%';
+ if (c != '%')
+ --fmt; /* so %z outputs %z etc. */
+ --buflen;
+ continue;
+ }
+ if (base != 0) {
+ str = num + sizeof(num);
+ *--str = 0;
+ while (str > num + neg) {
+ *--str = hexchars[val % base];
+ val = val / base;
+ if (--prec <= 0 && val == 0)
+ break;
+ }
+ switch (neg) {
+ case 1:
+ *--str = '-';
+ break;
+ case 2:
+ *--str = 'x';
+ *--str = '0';
+ break;
+ }
+ len = num + sizeof(num) - 1 - str;
+ } else {
+ len = strlen(str);
+ if (prec > 0 && len > prec)
+ len = prec;
+ }
+ if (width > 0) {
+ if (width > buflen)
+ width = buflen;
+ if ((n = width - len) > 0) {
+ buflen -= n;
+ for (; n > 0; --n)
+ *buf++ = fillch;
+ }
+ }
+ if (len > buflen)
+ len = buflen;
+ memcpy(buf, str, len);
+ buf += len;
+ buflen -= len;
+ }
+ *buf = 0;
+ return buf - buf0;
+}
+
+/*
+ * script_setenv - set an environment variable value to be used
+ * for scripts that we run (e.g. ip-up, auth-up, etc.)
+ */
+void
+script_setenv(var, value)
+ char *var, *value;
+{
+ size_t vl = strlen(var) + strlen(value) + 2;
+ int i;
+ char *p, *newstring;
+
+ newstring = (char *) malloc(vl);
+ if (newstring == 0)
+ return;
+ slprintf(newstring, vl, "%s=%s", var, value);
+
+ /* check if this variable is already set */
+ if (script_env != 0) {
+ for (i = 0; (p = script_env[i]) != 0; ++i) {
+ if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
+ free(p);
+ script_env[i] = newstring;
+ return;
+ }
+ }
+ } else {
+ i = 0;
+ script_env = (char **) malloc(16 * sizeof(char *));
+ if (script_env == 0)
+ return;
+ s_env_nalloc = 16;
+ }
+
+ /* reallocate script_env with more space if needed */
+ if (i + 1 >= s_env_nalloc) {
+ int new_n = i + 17;
+ char **newenv = (char **) realloc((void *)script_env,
+ new_n * sizeof(char *));
+ if (newenv == 0)
+ return;
+ script_env = newenv;
+ s_env_nalloc = new_n;
+ }
+
+ script_env[i] = newstring;
+ script_env[i+1] = 0;
+}
+
+/*
+ * script_unsetenv - remove a variable from the environment
+ * for scripts.
+ */
+void
+script_unsetenv(var)
+ char *var;
+{
+ int vl = strlen(var);
+ int i;
+ char *p;
+
+ if (script_env == 0)
+ return;
+ for (i = 0; (p = script_env[i]) != 0; ++i) {
+ if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
+ free(p);
+ while ((script_env[i] = script_env[i+1]) != 0)
+ ++i;
+ break;
+ }
+ }
+}
+
+/*
+ * strlcpy - like strcpy/strncpy, doesn't overflow destination buffer,
+ * always leaves destination null-terminated (for len > 0).
+ */
+size_t
+strlcpy(dest, src, len)
+ char *dest;
+ const char *src;
+ size_t len;
+{
+ size_t ret = strlen(src);
+
+ if (len != 0) {
+ if (ret < len)
+ strcpy(dest, src);
+ else {
+ strncpy(dest, src, len - 1);
+ dest[len-1] = 0;
+ }
+ }
+ return ret;
+}
+
+/*
+ * strlcat - like strcat/strncat, doesn't overflow destination buffer,
+ * always leaves destination null-terminated (for len > 0).
+ */
+size_t
+strlcat(dest, src, len)
+ char *dest;
+ const char *src;
+ size_t len;
+{
+ size_t dlen = strlen(dest);
+
+ return dlen + strlcpy(dest + dlen, src, (len > dlen? len - dlen: 0));
+}
+
+/*
+ * logit - does the hard work for fatal et al.
+ */
+static void
+logit(level, fmt, args)
+ int level;
+ char *fmt;
+ va_list args;
+{
+ int n;
+ char buf[256];
+
+ n = vslprintf(buf, sizeof(buf), fmt, args);
+ syslog(level, "%s", buf);
+ if (log_to_fd >= 0 && (level != LOG_DEBUG || debug)) {
+ if (buf[n-1] != '\n')
+ buf[n++] = '\n';
+ if (write(log_to_fd, buf, n) != n)
+ log_to_fd = -1;
+ }
+}
+
+/*
+ * fatal - log an error message and die horribly.
+ */
+void
+fatal __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_ERR, fmt, pvar);
+ va_end(pvar);
+
+ die(1); /* as promised */
+}
+
+/*
+ * error - log an error message.
+ */
+void
+error __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_ERR, fmt, pvar);
+ va_end(pvar);
+}
+
+/*
+ * warn - log a warning message.
+ */
+void
+warn __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_WARNING, fmt, pvar);
+ va_end(pvar);
+}
+
+/*
+ * notice - log a notice-level message.
+ */
+void
+notice __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_NOTICE, fmt, pvar);
+ va_end(pvar);
+}
+
+/*
+ * info - log an informational message.
+ */
+void
+info __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_INFO, fmt, pvar);
+ va_end(pvar);
+}
+
+/*
+ * dbglog - log a debug message.
+ */
+void
+dbglog __V((char *fmt, ...))
+{
+ va_list pvar;
+
+#if __STDC__
+ va_start(pvar, fmt);
+#else
+ char *fmt;
+ va_start(pvar);
+ fmt = va_arg(pvar, char *);
+#endif
+
+ logit(LOG_DEBUG, fmt, pvar);
+ va_end(pvar);
+}
+
+/*
+ * start_charshunt - create a child process to run the character shunt.
+ */
+static int
+start_charshunt(ifd, ofd)
+ int ifd, ofd;
+{
+ int cpid;
+
+ cpid = fork();
+ if (cpid == -1) {
+ error("Can't fork process for character shunt: %m");
+ return 0;
+ }
+ if (cpid == 0) {
+ /* child */
+ close(pty_slave);
+ setuid(uid);
+ if (getuid() != uid)
+ fatal("setuid failed");
+ setgid(getgid());
+ if (!nodetach)
+ log_to_fd = -1;
+ charshunt(ifd, ofd, record_file);
+ exit(0);
+ }
+ charshunt_pid = cpid;
+ close(pty_master);
+ pty_master = -1;
+ ttyfd = pty_slave;
+ record_child(cpid, "pppd (charshunt)", charshunt_done, NULL);
+ return 1;
+}
+
+static void
+charshunt_done(arg)
+ void *arg;
+{
+ charshunt_pid = 0;
+}
+
+/*
+ * charshunt - the character shunt, which passes characters between
+ * the pty master side and the serial port (or stdin/stdout).
+ * This runs as the user (not as root).
+ * (We assume ofd >= ifd which is true the way this gets called. :-).
+ */
+static void
+charshunt(ifd, ofd, record_file)
+ int ifd, ofd;
+ char *record_file;
+{
+ int n, nfds;
+ fd_set ready, writey;
+ u_char *ibufp, *obufp;
+ int nibuf, nobuf;
+ int flags;
+ int pty_readable, stdin_readable;
+ struct timeval lasttime;
+ FILE *recordf = NULL;
+
+ /*
+ * Reset signal handlers.
+ */
+ signal(SIGHUP, SIG_IGN); /* Hangup */
+ signal(SIGINT, SIG_DFL); /* Interrupt */
+ signal(SIGTERM, SIG_DFL); /* Terminate */
+ signal(SIGCHLD, SIG_DFL);
+ signal(SIGUSR1, SIG_DFL);
+ signal(SIGUSR2, SIG_DFL);
+ signal(SIGABRT, SIG_DFL);
+ signal(SIGALRM, SIG_DFL);
+ signal(SIGFPE, SIG_DFL);
+ signal(SIGILL, SIG_DFL);
+ signal(SIGPIPE, SIG_DFL);
+ signal(SIGQUIT, SIG_DFL);
+ signal(SIGSEGV, SIG_DFL);
+#ifdef SIGBUS
+ signal(SIGBUS, SIG_DFL);
+#endif
+#ifdef SIGEMT
+ signal(SIGEMT, SIG_DFL);
+#endif
+#ifdef SIGPOLL
+ signal(SIGPOLL, SIG_DFL);
+#endif
+#ifdef SIGPROF
+ signal(SIGPROF, SIG_DFL);
+#endif
+#ifdef SIGSYS
+ signal(SIGSYS, SIG_DFL);
+#endif
+#ifdef SIGTRAP
+ signal(SIGTRAP, SIG_DFL);
+#endif
+#ifdef SIGVTALRM
+ signal(SIGVTALRM, SIG_DFL);
+#endif
+#ifdef SIGXCPU
+ signal(SIGXCPU, SIG_DFL);
+#endif
+#ifdef SIGXFSZ
+ signal(SIGXFSZ, SIG_DFL);
+#endif
+
+ /*
+ * Open the record file if required.
+ */
+ if (record_file != NULL) {
+ recordf = fopen(record_file, "a");
+ if (recordf == NULL)
+ error("Couldn't create record file %s: %m", record_file);
+ }
+
+ /* set all the fds to non-blocking mode */
+ flags = fcntl(pty_master, F_GETFL);
+ if (flags == -1
+ || fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
+ warn("couldn't set pty master to nonblock: %m");
+ flags = fcntl(ifd, F_GETFL);
+ if (flags == -1
+ || fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
+ warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
+ if (ofd != ifd) {
+ flags = fcntl(ofd, F_GETFL);
+ if (flags == -1
+ || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
+ warn("couldn't set stdout to nonblock: %m");
+ }
+
+ nibuf = nobuf = 0;
+ ibufp = obufp = NULL;
+ pty_readable = stdin_readable = 1;
+ nfds = (ofd > pty_master? ofd: pty_master) + 1;
+ if (recordf != NULL) {
+ gettimeofday(&lasttime, NULL);
+ putc(7, recordf); /* put start marker */
+ putc(lasttime.tv_sec >> 24, recordf);
+ putc(lasttime.tv_sec >> 16, recordf);
+ putc(lasttime.tv_sec >> 8, recordf);
+ putc(lasttime.tv_sec, recordf);
+ lasttime.tv_usec = 0;
+ }
+
+ while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
+ FD_ZERO(&ready);
+ FD_ZERO(&writey);
+ if (nibuf != 0)
+ FD_SET(pty_master, &writey);
+ else if (stdin_readable)
+ FD_SET(ifd, &ready);
+ if (nobuf != 0)
+ FD_SET(ofd, &writey);
+ else if (pty_readable)
+ FD_SET(pty_master, &ready);
+ if (select(nfds, &ready, &writey, NULL, NULL) < 0) {
+ if (errno != EINTR)
+ fatal("select");
+ continue;
+ }
+ if (FD_ISSET(ifd, &ready)) {
+ ibufp = inpacket_buf;
+ nibuf = read(ifd, ibufp, sizeof(inpacket_buf));
+ if (nibuf < 0 && errno == EIO)
+ nibuf = 0;
+ if (nibuf < 0) {
+ if (!(errno == EINTR || errno == EAGAIN)) {
+ error("Error reading standard input: %m");
+ break;
+ }
+ nibuf = 0;
+ } else if (nibuf == 0) {
+ /* end of file from stdin */
+ stdin_readable = 0;
+ /* do a 0-length write, hopefully this will generate
+ an EOF (hangup) on the slave side. */
+ write(pty_master, inpacket_buf, 0);
+ if (recordf)
+ if (!record_write(recordf, 4, NULL, 0, &lasttime))
+ recordf = NULL;
+ } else {
+ FD_SET(pty_master, &writey);
+ if (recordf)
+ if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
+ recordf = NULL;
+ }
+ }
+ if (FD_ISSET(pty_master, &ready)) {
+ obufp = outpacket_buf;
+ nobuf = read(pty_master, obufp, sizeof(outpacket_buf));
+ if (nobuf < 0 && errno == EIO)
+ nobuf = 0;
+ if (nobuf < 0) {
+ if (!(errno == EINTR || errno == EAGAIN)) {
+ error("Error reading pseudo-tty master: %m");
+ break;
+ }
+ nobuf = 0;
+ } else if (nobuf == 0) {
+ /* end of file from the pty - slave side has closed */
+ pty_readable = 0;
+ stdin_readable = 0; /* pty is not writable now */
+ nibuf = 0;
+ close(ofd);
+ if (recordf)
+ if (!record_write(recordf, 3, NULL, 0, &lasttime))
+ recordf = NULL;
+ } else {
+ FD_SET(ofd, &writey);
+ if (recordf)
+ if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
+ recordf = NULL;
+ }
+ }
+ if (FD_ISSET(ofd, &writey)) {
+ n = write(ofd, obufp, nobuf);
+ if (n < 0) {
+ if (errno != EIO) {
+ error("Error writing standard output: %m");
+ break;
+ }
+ pty_readable = 0;
+ nobuf = 0;
+ } else {
+ obufp += n;
+ nobuf -= n;
+ }
+ }
+ if (FD_ISSET(pty_master, &writey)) {
+ n = write(pty_master, ibufp, nibuf);
+ if (n < 0) {
+ if (errno != EIO) {
+ error("Error writing pseudo-tty master: %m");
+ break;
+ }
+ stdin_readable = 0;
+ nibuf = 0;
+ } else {
+ ibufp += n;
+ nibuf -= n;
+ }
+ }
+ }
+ exit(0);
+}
+
+static int
+record_write(f, code, buf, nb, tp)
+ FILE *f;
+ int code;
+ u_char *buf;
+ int nb;
+ struct timeval *tp;
+{
+ struct timeval now;
+ int diff;
+
+ gettimeofday(&now, NULL);
+ now.tv_usec /= 100000; /* actually 1/10 s, not usec now */
+ diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
+ if (diff > 0) {
+ if (diff > 255) {
+ putc(5, f);
+ putc(diff >> 24, f);
+ putc(diff >> 16, f);
+ putc(diff >> 8, f);
+ putc(diff, f);
+ } else {
+ putc(6, f);
+ putc(diff, f);
+ }
+ *tp = now;
+ }
+ putc(code, f);
+ if (buf != NULL) {
+ putc(nb >> 8, f);
+ putc(nb, f);
+ fwrite(buf, nb, 1, f);
+ }
+ fflush(f);
+ if (ferror(f)) {
+ error("Error writing record file: %m");
+ return 0;
+ }
+ return 1;
}