+ PPP for Linux
+ -------------
-PPP for Linux Version 0.2.8
-============= based on
- ppp-2.1.0
- May 1994
-
-Michael Callahan callahan@maths.ox.ac.uk
-Al Longyear longyear@netcom.com
-
- Contents:
- INTRODUCTION
- CREDITS
- FUTURE PLANS
- INSTALLATION
- GENERAL NETWORK CONFIGURATION
- CONNECTING TO A PPP SERVER
- IF IT WORKS
- IF IT DOESN'T WORK
- IF IT STILL DOESN'T WORK (OR, BUG REPORTS)
- DYNAMIC ADDRESS ASSIGNMENT
- SETTING UP A MACHINE FOR INCOMING PPP CONNECTIONS
- ADDING MORE PPP CHANNELS
- CHANGES FROM LINUX PPP 0.1.x
- CONCLUSION
-
-
-INTRODUCTION
-
-This is a PPP driver for Linux. It has been used by many people and
-seems to be quite stable. It is capable of being used either as a
-'client'--for connecting a Linux machine to a local Internet provider,
-for example--or as a 'server'--allowing a Linux machine with a modem
-and an Ethernet connection to the Internet to provide dial-in PPP
-links. (In fact, the PPP protocol does not make the distinction
-between client and server, but this is the way people often think
-about it.)
+ Paul Mackerras
+ 8 March 2001
+
+ for ppp-2.4.2
+ Updated for ppp-2.4.5, Sep 08
+
+1. Introduction
+---------------
+
+The Linux PPP implementation includes both kernel and user-level
+parts. This package contains the user-level part, which consists of
+the PPP daemon (pppd) and associated utilities. In the past this
+package has contained updated kernel drivers. This is no longer
+necessary, as the current kernel sources contain up-to-date drivers
+(and have done since the 2.4.x kernel series).
+
+The Linux PPP implementation is capable of being used both for
+initiating PPP connections (as a `client') or for handling incoming
+PPP connections (as a `server'). Note that this is an operational
+distinction, based on how the connection is created, rather than a
+distinction that is made in the PPP protocols themselves.
+
+Mostly this package is used for PPP connections over modems connected
+via asynchronous serial ports, so this guide concentrates on this
+situation.
The PPP protocol consists of two parts. One is a scheme for framing
and encoding packets, the other is a series of protocols called LCP,
-IPCP, UPAP and CHAP, for negotiating link options and for
+IPCP, PAP and CHAP, for negotiating link options and for
authentication. This package similarly consists of two parts: a
kernel module which handles PPP's low-level framing protocol, and a
user-level program called pppd which implements PPP's negotiation
link, it in practice lies completely dormant until you want to take
the link down, when it negotiates a graceful disconnect.
-CREDITS
-
-I (MJC) wrote the original kernel driver from scratch. Laurence
-Culhane and Fred van Kempen's slip.c was priceless as a model (a
-perusal of the files will reveal that I often mimicked what slip.c
-did). Otherwise I just implemented what pppd needs, using RFC1331 as
-a guide. For the most part, the Linux driver provides the same
-interface as the free 386BSD and SunOS drivers. The exception is that
-Linux has no support for asynchronous I/O, so I hacked an ioctl into
-the PPP kernel module that provides a signal when packets appear and
-made pppd use this instead.
-
-Al Longyear ported version 2.0.4 of pppd (from the free package
-ppp-2.0.4) to Linux. He also provided several enhancements to both
-the kernel driver and the OS-independent part of pppd. His
-contributions to Linux PPP have been immense, and so this release
-is being distributed over both our names.
-
-The pppd program comes from the free distribution of PPP for Suns and
-386BSD machines, maintained by Paul Mackerras. This package lists
-"thanks to" Brad Parker, Greg Christy, Drew D. Perkins, Rick Adams and
-Chris Torek.
-
-FUTURE PLANS
+2. Installation
+---------------
+
+2.1 Kernel driver
+
+Assuming you are running a recent 2.4 or 2.6 (or later) series kernel,
+the kernel source code will contain an up-to-date kernel PPP driver.
+If the PPP driver was included in your kernel configuration when your
+kernel was built, then you only need to install the user-level
+programs. Otherwise you will need to get the source tree for your
+kernel version, configure it with PPP included, and recompile. Most
+Linux distribution vendors ship kernels with PPP included in the
+configuration.
+
+The PPP driver can be either compiled into the kernel or compiled as a
+kernel module. If it is compiled into the kernel, the PPP driver is
+included in the kernel image which is loaded at boot time. If it is
+compiled as a module, the PPP driver is present in one or more files
+under /lib/modules and is loaded into the kernel when needed.
+
+The 2.2 series kernels contain an older version of the kernel PPP
+driver, one which doesn't support multilink. If you want multilink,
+you need to run a 2.4 or 2.6 series kernel. The kernel PPP driver
+was completely rewritten for the 2.4 series kernels to support
+multilink and to allow it to operate over diverse kinds of
+communication medium (the 2.2 driver only operates over serial ports
+and devices which look like serial ports, such as pseudo-ttys).
+
+Under the 2.2 kernels, if PPP is compiled as a module, the PPP driver
+modules should be present in the /lib/modules/`uname -r`/net directory
+(where `uname -r` represents the kernel version number). The PPP
+driver module itself is called ppp.o, and there will usually be
+compression modules there, ppp_deflate.o and bsd_comp.o, as well as
+slhc.o, which handles TCP/IP header compression. If the PPP driver is
+compiled into the kernel, the compression code will still be compiled
+as modules, for kernels before 2.2.17pre12. For 2.2.17pre12 and later,
+if the PPP driver is compiled in, the compression code will also.
+
+Under the 2.4 kernels, there are two PPP modules, ppp_generic.o and
+ppp_async.o, plus the compression modules (ppp_deflate.o, bsd_comp.o
+and slhc.o). If the PPP generic driver is compiled into the kernel,
+the other four can then be present either as modules or compiled into
+the kernel. There is a sixth module, ppp_synctty.o, which is used for
+synchronous tty devices such as high-speed WAN adaptors.
+
+
+2.2 User-level programs
+
+If you obtained this package in .rpm or .deb format, you simply follow
+the usual procedure for installing the package.
+
+If you are using the .tar.gz form of this package, then cd into the
+ppp-2.4.5 directory you obtained by unpacking the archive and issue
+the following commands:
+
+$ ./configure
+$ make
+# make install
+
+The `make install' has to be done as root. This makes and installs
+four programs and their man pages: pppd, chat, pppstats and pppdump.
+If the /etc/ppp configuration directory doesn't exist, the `make
+install' step will create it and install some default configuration
+files.
+
+
+2.3 System setup for 2.4 kernels
+
+Under the 2.4 series kernels, pppd needs to be able to open /dev/ppp,
+character device (108,0). If you are using udev (as most distributions
+do), the /dev/ppp node should be created by udevd.
+
+Otherwise you may need to create a /dev/ppp device node with the
+commands:
+
+# mknod /dev/ppp c 108 0
+# chmod 600 /dev/ppp
+
+
+2.4 System setup under 2.2 series kernels
+
+Under the 2.2 series kernels, you should add the following to your
+/etc/modules.conf or /etc/conf.modules:
+
+alias tty-ldisc-3 ppp
+alias ppp-compress-21 bsd_comp
+alias ppp-compress-24 ppp_deflate
+alias ppp-compress-26 ppp_deflate
+
+
+3. Getting help with problems
+-----------------------------
+
+If you have problems with your PPP setup, or you just want to ask some
+questions, or better yet if you can help others with their PPP
+questions, then you should join the linux-ppp mailing list. Send an
+email to majordomo@vger.kernel.org with a line in the body saying
-The main missing feature is the ability to fire up a PPP connection
-automatically when a packet destined for the remote host is generated
-("demand-dialing"). Work is progressing on this, but it involves some
-nontrivial design issues.
+subscribe linux-ppp
+To leave the mailing list, send an email to majordomo@vger.kernel.org
+with a line in the body saying
-INSTALLATION
+unsubscribe linux-ppp
-This version of PPP has been tested on 1.0.x (x=0..9) and 1.1.x
-(x=0..14) kernels. It will probably not work on kernels much earlier
-than this due to a change in the routing code. If you have an earlier
-kernel, please upgrade.
-
-joining the PPP channel of linux-activists:
+To send a message to the list, email it to linux-ppp@vger.kernel.org.
+You don't have to be subscribed to send messages to the list.
- This isn't really part of installation, but if you DO use
- Linux PPP you should do this. Send a message with the line
- X-Mn-Admin: join PPP
- contained in the body to linux-activists-request@niksula.hut.fi
- You can send to the list by mailing to
- linux-activists@niksula.hut.fi and putting the line
- X-Mn-Key: PPP
- at the start of your message.
+You can also email me (paulus@samba.org) but I am overloaded with
+email and I can't respond to most messages I get in a timely fashion.
- The advantage of subscribing is that you'll be informed of
- updates and patches, and you'll be able to draw on the
- experience of many PPP users. If you have a problem, I may not
- be able to diagnose it, but someone else may have solved it
- already.
-
- Note also that I do not read the linux Usenet newsgroups
- regularly enough to catch any discussions of PPP; if you want to
- reach the PPP audience you should join the linux-activists
- channel.
-
- To leave the PPP mailing list :-(, send a message with the line
- X-Mn-Admin: leave PPP
- to linux-activists-request.
-
-kernel driver installation:
-
- This depends on the kernel version you're using.
-
- Since 1.1.14, Linux kernels have had built-in support for PPP.
- You'll be asked whether you want PPP when you run "make config".
- It's as easy as that.
-
- In 1.1.13, PPP is there but the PPP line in config.in is
- commented out. If you have 1.1.13, you probably should just
- upgrade anyway.
-
- Kernel versions prior to 1.1.13 (including all 1.0.x kernels)
- have had (hidden) support for PPP in the kernel configuration
- setup for quite some time. Adding the PPP kernel driver is
- easy:
-
- 1) copy ppp.c from the linux subdirectory of the distribution
- to drivers/net and ppp.h to include/linux
- 2) uncomment the CONFIG_PPP line in config.in
- 3) if you are using 1.1.3 or earlier (including 1.0.x):
- uncomment the line in ppp.c that begins
- /* #define NET02D
- by removing the "/* " characters
- 4) in the top level of the kernel source
- make config
- make dep
- make
-
- Reboot with the new kernel. At startup, you should see
- something line this:
-
- PPP: version 0.2.8 (4 channels)
- TCP compression code copyright 1989 Regents of the University of California
- PPP line discipline registered.
-
- (If you want more than 4 channels, see the section "ADDING MORE
- PPP CHANNELS" below.)
-
- Now, try looking at the contents of /proc/net/dev. It should
- look something like this:
-
- Inter-| Receive | Transmit
- face |packets errs drop fifo frame|packets errs drop fifo colls carrier
- lo: 0 0 0 0 0 0 0 0 0 0 0
- ppp0: 0 0 0 0 0 0 0 0 0 0 0
- ppp1: 0 0 0 0 0 0 0 0 0 0 0
- ppp2: 0 0 0 0 0 0 0 0 0 0 0
- ppp3: 0 0 0 0 0 0 0 0 0 0 0
-
- This indicates that the driver is successfully installed.
-
- (Of course, you should keep a kernel without PPP around, in case
- something goes wrong.)
-
-pppd installation:
-
- First execute the following commands (in the ppp-2.2 directory):
-
- ./configure
- make
-
- This will make the pppd and chat programs.
-
- To install, type 'make install' (in the ppp-2.2 directory).
- This will put chat and pppd binaries in /usr/etc
- and the pppd.8 manual page in /usr/man/man8.
-
- pppd needs to be run as root. You can either make it setuid
- root or just use it when you are root. 'make install' will try
- to install it setuid root. Making pppd setuid root is
- convenient for a single-user machine, but has security
- implications which you should investigate carefully before
- making it available on a multiuser machine.
-
-GENERAL NETWORK CONFIGURATION
-
-Since many people don't use the Linux networking code at all until
-they get a PPP link, this section describes generally what's needed to
-get things running. In principle none of this is special to PPP. For
-more details, you should consult the relevant Linux HOWTOs. If you
-already understand network setup, you can skip this section.
-
-The first file that requires attention is the rc script that does
-network configuration at boot time, called /etc/rc.net or
-/etc/rc.d/rc.net.{1,2} or something similar, depending on your Linux
-distribution. This file should 'ifconfig' the loopback interface lo,
-and should add an interface route for it. These lines might look
-something like this:
- $CONFIG lo 127.0.0.1
- $ROUTE add loopback
-or
- /sbin/ifconfig lo 127.0.0.1
- /sbin/route add 127.0.0.1
-
-However, it should *not* config an ethernet card or install any other
-routes (unless you actually have an ethernet card, in which case I'll
-assume you know what to do). Many distributions will provide scripts
-that expect you to have an ethernet card.
-
-You also need to decide whether you want to allow incoming
-telnet/ftp/finger, etc. If so, you should have the rc startup script
-run the 'inetd' daemon.
-
-Next, you should set up /etc/hosts to have two lines. The first
-should just give the loopback or localhost address and the second
-should give your own host name and the IP address your PPP connection
-will use. For example:
- 127.0.0.1 loopback localhost # useful aliases
- 192.1.1.17 billpc.whitehouse.gov bill # my hostname
-where my IP address is 192.1.1.17 and my hostname is
-billpc.whitehouse.gov. (Not really, you understand.) If your PPP
-server does dynamic IP address assignment, give a guess as to an
-address you might get (see also "Dynamic Address Assignment" below).
-
-Finally, you need to configure the domain name system by putting
-appropriate lines in /etc/resolv.conf . It should look something like
-this:
- domain whitehouse.gov
- nameserver 192.1.2.1
- nameserver 192.1.2.10
-Assuming there are nameservers at 192.1.2.1 and 192.1.2.10, then when
-you get connected with PPP, you can reach hosts whose full names are
-'hillarypc.whitehouse.gov' and 'chelseapc.whitehouse.gov' by the names
-'hillarypc' and 'chelseapc'. You can probably find out the right
-domain name to use and the IP numbers of nameservers from whoever's
-providing your PPP link.
-
-CONNECTING TO A PPP SERVER
-
-To use PPP, you invoke the pppd program with appropriate options.
-Everything you need to know is contained in the pppd(8) manual page.
-However, it's useful to see some examples:
-
-Example 1: A simple dial-up connection.
-
-Here's a command for connecting to a PPP server by modem.
-
- pppd connect 'chat -v -f chat-script' \
- /dev/cua1 38400 -detach debug crtscts modem defaultroute 192.1.1.17:
-
-where the file chat-script contains:
-
- "" ATDT5551212 CONNECT "" ogin: ppp word: whitewater
+There are also several relevant news groups, such as comp.protocols.ppp,
+comp.os.linux.networking, or comp.os.linux.setup.
+
+
+4. Configuring your dial-out PPP connections
+--------------------------------------------
+
+Some Linux distribution makers include tools in their distributions
+for setting up PPP connections. For example, for Red Hat Linux and
+derivatives, you should probably use linuxconf or netcfg to set up
+your PPP connections.
+
+The two main windowing environments for Linux, KDE and Gnome, both
+come with GUI utilities for configuring and controlling PPP dial-out
+connections. They are convenient and relatively easy to configure.
+
+A third alternative is to use a PPP front-end package such as wvdial
+or ezppp. These also will handle most of the details of talking to
+the modem and setting up the PPP connection for you.
+
+Assuming that you don't want to use any of these tools, you want to
+set up the configuration manually yourself, then read on. This
+document gives a brief description and example. More details can be
+found by reading the pppd and chat man pages and the PPP-HOWTO.
+
+We assume that you have a modem that uses the Hayes-compatible AT
+command set connected to an async serial port (e.g. /dev/ttyS0) and
+that you are dialling out to an ISP.
+
+The trickiest and most variable part of setting up a dial-out PPP
+connection is the part which involves getting the modem to dial and
+then invoking PPP service at the far end. Generally, once both ends
+are talking PPP the rest is relatively straightforward.
+
+Now in fact pppd doesn't know anything about how to get modems to dial
+or what you have to say to the system at the far end to get it to talk
+PPP. That's handled by an external program such as chat, specified
+with the connect option to pppd. Chat takes a series of strings to
+expect from the modem interleaved with a series of strings to send to
+the modem. See the chat man page for more information. Here is a
+simple example for connecting to an ISP, assuming that the ISP's
+system starts talking PPP as soon as it answers the phone:
+
+pppd connect 'chat -v "" AT OK ATDT5551212 ~' \
+ /dev/ttyS0 57600 crtscts debug defaultroute
Going through pppd's options in order:
- connect 'chat ...' This gives a command to run to contact the
+ connect 'chat ...' This gives a command to run to contact the
PPP server. Here the supplied 'chat' program is used to dial a
remote computer. The whole command is enclosed in single quotes
because pppd expects a one-word argument for the 'connect' option.
The options to 'chat' itself are:
- -v verbose mode; log what we do to syslog
- -f chat-script expect-send strings are in the file chat-script
- The strings for chat to look for and to send are stored in the
- chat-script file. The strings can be put on the chat command line,
- but this is not recommended because it makes your password visible
- to anyone running ps while chat is running. The strings are:
+
+ -v verbose mode; log what we do to syslog
"" don't wait for any prompt, but instead...
+ AT send the string "AT"
+ OK expect the response "OK", then
ATDT5551212 dial the modem, then
- CONNECT wait for answer
- "" send a return (null text followed by usual return)
- ogin: ppp word: whitewater log in.
- /dev/cua1 specify the callout serial port cua1
- 38400 specify baud rate
- -detach normally, pppd forks and puts itself in the background;
- this option prevents this
- debug log status in syslog
- crtscts use hardware flow control between computer and modem
- (at 38400 this is a must)
- modem indicate that this is a modem device; pppd will hang up the
- phone before and after making the call
- defaultroute once the PPP link is established, make it the
- default route; if you have a PPP link to the Internet this
- is probably what you want
- 192.1.1.17: this is a degenerate case of a general option
- of the form x.x.x.x:y.y.y.y . Here x.x.x.x is the local IP
- address and y.y.y.y is the IP address of the remote end of the
- PPP connection. If this option is not specified, or if just
- one side is specified, then x.x.x.x defaults to the IP address
- associated with the local machine's hostname (in /etc/hosts),
- and y.y.y.y is determined by the remote machine. So if this
- example had been taken from the fictional machine 'billpc',
- this option would actually be redundant.
-
-pppd will write error messages and debugging logs to the syslogd
-daemon using the facility name "daemon". (Verbose output from chat
-uses facility "local2".) These messages may already be logged to the
-console or to a file like /usr/adm/messages; consult your
-/etc/syslog.conf file to see. If you want to make all pppd and chat
-messages go to the console, add the line
- daemon,local2.* /dev/console
-to syslog.conf; make sure to put one or more TAB characters between
-the two fields.
-
-Example 2: Connecting to PPP server over hard-wired link.
-
-This is a slightly more complicated example. This is the script I run
-to make my own PPP link, which is over a hard-wired Gandalf link to an
-Ultrix machine running Morningstar PPP.
-
- pppd connect /etc/ppp/ppp-connect defaultroute noipdefault debug \
- kdebug 2 /dev/cua0 9600
-
-Here /etc/ppp/ppp-connect is the following script:
- #! /bin/sh
- /etc/ppp/sendbreak
- chat -v -t60 "" \; "service :" blackice ogin: callahan word: PASSWORD \
- black% "stty -echo; ppp" "Starting PPP now" && sleep 5
-
-This sends a break to wake up my terminal server, sends a semicolon
-(which lets my terminal server do autobaud detection), then says we
-want the service "blackice". It logs in, waits for a shell prompt
-("black%"), then starts PPP. The -t60 argument sets the timeout to a
-minute, since things here are sometimes very slow. (Ideally the
-expect-send strings for chat should be in a file.)
-
-The "&& sleep 5" causes the script to pause for 5 seconds, unless chat
-fails in which case it exits immediately. This is just to give the
-PPP server time to start (it's very slow). Also, the "stty -echo"
-turned out to be very important for me; without it, my pppd would
-sometimes start to send negotiation packets before the remote PPP
-server had time to turn off echoing. The negotiation packets would
-then get sent back to my local machine, be rejected (PPP is able to
-detect loopback) and pppd would fail before the remote PPP server even
-got going. The "stty -echo" command prevents this confusion. This
-kind of problem should only ever affect a *very* few people who
-connect to a PPP server that runs as a command on a slow Unix machine,
-but I wanted to mention it because it took me several frustrating
-hours to figure out.
-
-The pppd options are mostly familiar. Two that are new are
-"noipdefault" and "kdebug 2". "noipdefault" tells pppd to ask the
-remote end for the IP address to use; this is necessary if the PPP
-server implements dynamic IP address assignment as mine does (i.e., I
-don't know what address I'll get ahead of time). "kdebug 2" sets the
-kernel debugging level to 2, enabling slightly chattier messages from
-the ppp kernel code.
-
-
-
-Anyway, assuming your connection is working, you should see chat dial
-the modem, then perhaps some messages from pppd (depending on your
-syslog.conf setup), then some kernel messages like this:
-
- ppp: channel ppp0 mtu changed to 1500
- ppp: channel ppp0 open
- ppp: channel ppp0 going up for IP packets!
-
-(These messages will only appear if you gave the option "kdebug 2" and
-have kern.info messages directed to the screen.) Simultaneously, pppd
-is also writing interesting things to /usr/adm/messages (or other log
-file, depending on syslog.conf).
-
-IF IT WORKS
-
-If you think you've got a connection, there are a number of things you
-can do to test it.
-
-First, type
+ ~ wait for a ~ character, indicating the start
+ of a PPP frame from the server
+
+ /dev/ttyS0 specifies which serial port the modem is connected to
+ 57600 specifies the baud rate to use
+ crtscts use hardware flow control using the RTS & CTS signals
+ debug log the PPP negotiation with syslog
+ defaultroute add default network route via the PPP link
+
+Pppd will write error messages and debugging logs to the syslogd
+daemon using the facility name "daemon". These messages may already
+be logged to the console or to a file like /var/log/messages; consult
+your /etc/syslog.conf file to see. If you want to make all pppd
+messages go to a file such as /var/log/ppp-debug, add the line
+
+daemon.* /var/log/ppp-debug
+ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ This is one or more tabs. Do not use spaces.
+
+to syslog.conf; make sure to put one or more TAB characters (not
+spaces!) between the two fields. Then you need to create an empty
+/var/log/ppp-debug file with a command such as
+
+ touch /var/log/ppp-debug
+
+and then restart syslogd, usually by sending it a SIGHUP signal with a
+command like this:
+
+ killall -HUP syslogd
+
+
+4.1 Is the link up?
+
+The main way to tell if your PPP link is up and operational is the
+ifconfig ("interface configuration") command. Type
+
/sbin/ifconfig
-(ifconfig may live elsewhere, depending on your distribution.) This
-should show you all the network interfaces that are 'UP'. ppp0 should
-be one of them, and you should recognize the first IP address as your
-own and the "POINT-TO-POINT ADDR" as the address of your server.
-Here's what it looks like on my machine:
-
-lo Link encap Local Loopback
- inet addr 127.0.0.1 Bcast 127.255.255.255 Mask 255.0.0.0
- UP LOOPBACK RUNNING MTU 2000 Metric 1
- RX packets 0 errors 0 dropped 0 overrun 0
- TX packets 0 errors 0 dropped 0 overrun 0
-
-ppp0 Link encap Serial Line IP
- inet addr 192.76.32.2 P-t-P 129.67.1.165 Mask 255.255.255.0
+
+at a shell prompt. It should print a list of interfaces including one
+like this example:
+
+ppp0 Link encap Point-to-Point Protocol
+ inet addr 192.76.32.3 P-t-P 129.67.1.165 Mask 255.255.255.0
UP POINTOPOINT RUNNING MTU 1500 Metric 1
RX packets 33 errors 0 dropped 0 overrun 0
TX packets 42 errors 0 dropped 0 overrun 0
-Now, type
- ping z.z.z.z
-where z.z.z.z is the address of your server. This should work.
-Here's what it looks like for me:
- waddington:~$ ping 129.67.1.165
+Assuming that ifconfig shows the ppp network interface, you can test
+the link using the ping command like this:
+
+ /sbin/ping -c 3 129.67.1.165
+
+where the address you give is the address shown as the P-t-P address
+in the ifconfig output. If the link is operating correctly, you
+should see output like this:
+
PING 129.67.1.165 (129.67.1.165): 56 data bytes
64 bytes from 129.67.1.165: icmp_seq=0 ttl=255 time=268 ms
64 bytes from 129.67.1.165: icmp_seq=1 ttl=255 time=247 ms
64 bytes from 129.67.1.165: icmp_seq=2 ttl=255 time=266 ms
- ^C
--- 129.67.1.165 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 247/260/268 ms
- waddington:~$
-
-Try typing:
- netstat -nr
-This should show three routes, something like this:
-Kernel routing table
-Destination Gateway Genmask Flags Metric Ref Use Iface
-129.67.1.165 0.0.0.0 255.255.255.255 UH 0 0 6 ppp0
-127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
-0.0.0.0 129.67.1.165 0.0.0.0 UG 0 0 6298 ppp0
-
-If your output looks similar but doesn't have the destination 0.0.0.0
-line (which refers to the default route used for connections), you may
-have run pppd without the 'defaultroute' option.
-
-At this point you can try telnetting/ftping/fingering whereever you
-want, bearing in mind that you'll have to use numeric IP addresses
-unless you've set up your /etc/resolv.conf correctly.
-
-IF IT DOESN'T WORK
-
-If you don't seem to get a connection, the thing to do is to collect
-'debug' output from pppd. To do this, make sure you run pppd with the
-'debug' option, and put the following two lines in your
-/etc/syslog.conf file:
- daemon,local2.* /dev/console
- daemon,local2.* /usr/adm/ppplog
-This will cause pppd's messages to be written to the current virtual
-console and to the file /usr/adm/ppplog. Note that the left-hand
-field and the right-hand field must be separated by at least one TAB
-character. After modifying /etc/syslog.conf, you must execute the
-command 'kill -HUP <pid>' where <pid> is the process ID of the
-currently running syslogd process to cause it to re-read the
-configuration file.
-
-Some messages to look for:
- - "pppd[NNN]: Connected..." means that the "connect" script has
- completed successfully.
- - "pppd[NNN]: sent [LCP ConfReq"... means that pppd has attempted to
- begin negotiation with the remote end.
- - "pppd[NNN]: recv [LCP ConfReq"... means that pppd has received a
- negotiation frame from the remote end.
- - "pppd[NNN]: ipcp up" means that pppd has reached the point where
- it believes the link is ready for IP traffic to travel across it.
-
-If you never see a "recv" message then there may be serious problems
-with your link. (For example, the link may not be passing all 8
-bits.) If that's the case, it would be useful to collect a debug log
-which contains all the bytes being passed between your computer and
-the remote PPP server. To do this, alter your syslog.conf lines to
-look like this
- local2.*,kern.* /dev/console
- local2.*,kern.* /usr/adm/ppplog
-and HUP the syslog daemon as before. Then, run pppd with the option
-"kdebug 5". Whatever characters arrive over the PPP terminal line
-will appear in the debugging output.
-
-Occasionally you may see a message like
- ppp_toss: tossing frame, reason = 4
-The PPP code is throwing away a packet ("frame") from the remote
-server because of a serial overrun. This means your CPU isn't able to
-read characters from the serial port as quickly as they arrive; the
-best solution is to get a 16550A serial chip, which gives the CPU some
-grace period. Reasons other than 4 indicate other kinds of serial
-errors, which should not occur.
-
-During the initial connection sequence, you may see one or more
-messages which indicate "bad fcs". This refers to a checksum error in
-a received PPP frame, and usually occurs at the start of a session
-when the peer system is sending some "text" messages, such as "hello
-this is the XYZ company". Messages of "bad fcs" once the link is
-established and the routes have been added are not normal and indicate
-transmssion errors or noise on the telephone line.
-
-IF IT STILL DOESN'T WORK (OR, BUG REPORTS)
-
-If you're still having difficulty, send the linux-activists PPP
-channel a bug report. It is extremely important to include as much
-information as possible; for example:
- - the version number of the kernel you are using
- - the version number of Linux PPP you are using
- - the exact command you use to start the PPP session
- - log output from a session run with the 'debug' option, captured
- using local2.*,kern.* in your syslog.conf file
- - the type of PPP peer that you are connecting to (eg, Xyzzy Corp
- terminal server, Morningstar PPP software, etc)
- - the kind of connection you use (modem, hardwired, etc...)
-
-DYNAMIC ADDRESS ASSIGNMENT
-
-You can use Linux PPP with a PPP server which assigns a different IP
-address every time you connect. You need to use the 'noipdefault'
-option to tell pppd to request the IP address from the remote host.
-
-Sometimes you may get an error message like "Cannot assign requested
-address" when you use a Linux client (for example, "talk"). This
-happens when the IP address given in /etc/hosts for our hostname
-differs from the IP address used by the PPP interface. The solution
-is to use ifconfig ppp0 to get the interface address and then edit
-/etc/hosts appropriately.
-
-SETTING UP A MACHINE FOR INCOMING PPP CONNECTIONS
-
-Suppose you want to permit another machine to call yours up and start
-a PPP session. This is possible using Linux PPP.
-
-One way is to create an account named, say, 'ppp', with the login
-shell being a short script that starts pppd. For example, the passwd
-entry might look like this:
- ppp:(encrypted password):102:50:PPP client login:/tmp:/etc/ppp/ppplogin
-Here the file /etc/ppp/ppplogin would be an executable script
-containing something like:
- #!/bin/sh
- exec /usr/etc/pppd passive :192.1.2.23
-Here we will insist that the remote machine use IP address 192.1.2.23,
-while the local PPP interface will use the IP address associated with
-this machine's hostname in /etc/hosts. The 'passive' option (which is
-not required) just means that pppd will try to open negotiations when
-it starts, but if it receives no reply it will just wait silently.
-This is appropriate if the remote end might take some time before it's
-ready to negotiate. (Note that the meaning of the 'passive' option
-changed between ppp-1.3 and ppp-2.0.)
-
-This setup is sufficient if you just want to connect two machines so
-that they can talk to one another. If you want to use Linux PPP to
-connect a single machine to an entire network, or to connect two
-networks together, then you need to arrange for packets to be routed
-from the networks to the PPP link. Setting up a link between networks
-is beyond the scope of this document; you should examine the routing
-options in the manual page for pppd carefully and find out about
-routed, etc.
-
-Let's consider just the first case. Suppose you have a Linux machine
-attached to an Ethernet, and you want to allow its PPP peer to be able
-to communicate with hosts on that Ethernet. To do this, you should
-have the remote machine use an IP address that would normally appear
-to be on the local Ethernet segment and you should give the 'proxyarp'
-option to pppd on the server. Suppose, for example, we have this
-setup:
-
- 192.1.2.23 192.1.2.17
-+-----------+ PPP link +----------+
-| chelseapc | ------------------- | billpc |
-+-----------+ +----------+
- | Ethernet
- ----------------------------------- 192.1.2.x
-
-Here the PPP and Ethernet interfaces of billpc will have IP address
-192.1.2.17. (It's OK for one or more PPP interfaces on a machine to
-share an IP address with an Ethernet interface.) There is an
-appropriate entry in /etc/passwd on billpc to allow chelseapc to call
-in, with the /etc/ppp/ppplogin script containing
- #!/bin/sh
- exec /usr/etc/pppd passive proxyarp :192.1.2.23
-When the link comes up, pppd will enter a "proxy arp" entry for
-chelseapc into the arp table on billpc. What this means effectively
-is that billpc will pretend to the other machines on the 192.1.2.x
-Ethernet that its Ethernet interface is ALSO the interface for
-chelseapc (192.1.2.23) as well as billpc (192.1.2.17). In practice
-this means that chelseapc can communicate just as if it was directly
-connected to the Ethernet.
-
-ADDING MORE PPP CHANNELS
-
-By default, Linux PPP comes with 4 kernel channels, which means that
-at most 4 simultaneous PPP sessions are possible. If you desire more
-such sessions (for example if you are serving many dialup lines), you
-can easily reconfigure the kernel to add new channels. There are two
-steps.
-
-First you need to edit the kernel file drivers/net/Space.c . As
-distributed, it contains a section that looks like this:
-
-#if defined(CONFIG_PPP)
-extern int ppp_init(struct device *);
-static struct device ppp3_dev = {
- "ppp3", 0x0, 0x0, 0x0, 0x0, 3, 0, 0, 0, 0, NEXT_DEV, ppp_init, };
-static struct device ppp2_dev = {
- "ppp2", 0x0, 0x0, 0x0, 0x0, 2, 0, 0, 0, 0, &ppp3_dev, ppp_init, };
-static struct device ppp1_dev = {
- "ppp1", 0x0, 0x0, 0x0, 0x0, 1, 0, 0, 0, 0, &ppp2_dev, ppp_init, };
-static struct device ppp0_dev = {
- "ppp0", 0x0, 0x0, 0x0, 0x0, 0, 0, 0, 0, 0, &ppp1_dev, ppp_init, };
-#undef NEXT_DEV
-#define NEXT_DEV (&ppp0_dev)
-#endif /* PPP */
-
-The pattern should be obvious. For more channels, you need to add
-more "static struct device pppN_dev" lines, changing the first, sixth
-and eleventh structure entries as appropriate. The highest numbered
-PPP device should have NEXT_DEV in its eleventh structure field, and
-you should change the ppp3_dev structure to have &ppp4_dev there
-instead.
-
-For example, to add 2 extra channels, you would have
-
-#if defined(CONFIG_PPP)
-extern int ppp_init(struct device *);
-static struct device ppp5_dev = {
- "ppp5", 0x0, 0x0, 0x0, 0x0, 5, 0, 0, 0, 0, NEXT_DEV, ppp_init, };
-static struct device ppp4_dev = {
- "ppp4", 0x0, 0x0, 0x0, 0x0, 4, 0, 0, 0, 0, &ppp5_dev, ppp_init, };
-static struct device ppp3_dev = {
- "ppp3", 0x0, 0x0, 0x0, 0x0, 3, 0, 0, 0, 0, &ppp4_dev, ppp_init, };
-... etc.
-
-Second, you need to change the line in ppp.h (in include/linux) to
-change the line that reads
-
-#define PPP_NRUNIT 4
-
-to show the new number of channels; in our case it would become
-
-#define PPP_NRUNIT 6
-
-Finally, recompile and reboot. The bootup message and the contents of
-/proc/net/dev should show the correct number of channels.
-
-CHANGES FROM LINUX PPP 0.1.x
-
-Linux PPP 0.1.x was based on the free PPP package PPP-1.3. Linux PPP
-0.2.1 is based on PPP-2.0.4. There have been some changes to the pppd
-options along with significant enhancements. You should read
-"RELNOTES" in the pppd directory for a description of the changes.
-
-Also, some options which were added to PPP-1.3 for the Linux version
-have now changed names:
- 'defroute' is now 'defaultroute'
- 'kerndebug' is now 'kdebug'
- 'dropdtr' is now 'modem'
-In addition, it is now necessary to use the 'noipdefault' option if
-you want to get the local IP address from the remote PPP server.
-
-CONCLUSION
-
-Good luck!
-
-Michael
+