+ initdisc = -1;
+
+ if (fd == ppp_fd)
+ ppp_fd = -1;
+}
+
+/*
+ * Check whether the link seems not to be 8-bit clean.
+ */
+void
+clean_check()
+{
+ int x;
+ char *s;
+
+ if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
+ s = NULL;
+ switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
+ case SC_RCV_B7_0:
+ s = "bit 7 set to 1";
+ break;
+ case SC_RCV_B7_1:
+ s = "bit 7 set to 0";
+ break;
+ case SC_RCV_EVNP:
+ s = "odd parity";
+ break;
+ case SC_RCV_ODDP:
+ s = "even parity";
+ break;
+ }
+ if (s != NULL) {
+ syslog(LOG_WARNING, "Serial link is not 8-bit clean:");
+ syslog(LOG_WARNING, "All received characters had %s", s);
+ }
+ }
+}
+
+/*
+ * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
+ * at the requested speed, etc. If `local' is true, set CLOCAL
+ * regardless of whether the modem option was specified.
+ *
+ * For *BSD, we assume that speed_t values numerically equal bits/second.
+ */
+void
+set_up_tty(fd, local)
+ int fd, local;
+{
+ struct termios tios;
+
+ if (tcgetattr(fd, &tios) < 0) {
+ syslog(LOG_ERR, "tcgetattr: %m");
+ die(1);
+ }
+
+ if (!restore_term) {
+ inittermios = tios;
+ ioctl(fd, TIOCGWINSZ, &wsinfo);
+ }
+
+ tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
+ if (crtscts > 0 && !local)
+ tios.c_cflag |= CRTSCTS;
+ else if (crtscts < 0)
+ tios.c_cflag &= ~CRTSCTS;
+
+ tios.c_cflag |= CS8 | CREAD | HUPCL;
+ if (local || !modem)
+ tios.c_cflag |= CLOCAL;
+ tios.c_iflag = IGNBRK | IGNPAR;
+ tios.c_oflag = 0;
+ tios.c_lflag = 0;
+ tios.c_cc[VMIN] = 1;
+ tios.c_cc[VTIME] = 0;
+
+ if (crtscts == -2) {
+ tios.c_iflag |= IXON | IXOFF;
+ tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
+ tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
+ }
+
+ if (inspeed) {
+ cfsetospeed(&tios, inspeed);
+ cfsetispeed(&tios, inspeed);
+ } else {
+ inspeed = cfgetospeed(&tios);
+ /*
+ * We can't proceed if the serial port speed is 0,
+ * since that implies that the serial port is disabled.
+ */
+ if (inspeed == 0) {
+ syslog(LOG_ERR, "Baud rate for %s is 0; need explicit baud rate",
+ devnam);
+ die(1);
+ }
+ }
+ baud_rate = inspeed;
+
+ if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
+ syslog(LOG_ERR, "tcsetattr: %m");
+ die(1);
+ }
+
+ restore_term = 1;
+}
+
+/*
+ * restore_tty - restore the terminal to the saved settings.
+ */
+void
+restore_tty(fd)
+ int fd;
+{
+ if (restore_term) {
+ if (!default_device) {
+ /*
+ * Turn off echoing, because otherwise we can get into
+ * a loop with the tty and the modem echoing to each other.
+ * We presume we are the sole user of this tty device, so
+ * when we close it, it will revert to its defaults anyway.
+ */
+ inittermios.c_lflag &= ~(ECHO | ECHONL);
+ }
+ if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
+ if (errno != ENXIO)
+ syslog(LOG_WARNING, "tcsetattr: %m");
+ ioctl(fd, TIOCSWINSZ, &wsinfo);
+ restore_term = 0;
+ }
+}
+
+/*
+ * setdtr - control the DTR line on the serial port.
+ * This is called from die(), so it shouldn't call die().
+ */
+void
+setdtr(fd, on)
+int fd, on;
+{
+ int modembits = TIOCM_DTR;
+
+ ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
+}
+
+
+/*
+ * open_ppp_loopback - open the device we use for getting
+ * packets in demand mode, and connect it to a ppp interface.
+ * Here we use a pty.
+ */
+void
+open_ppp_loopback()
+{
+ int flags;
+ struct termios tios;
+ int pppdisc = PPPDISC;
+
+ if (openpty(&loop_master, &loop_slave, loop_name, NULL, NULL) < 0) {
+ syslog(LOG_ERR, "No free pty for loopback");
+ die(1);
+ }
+ SYSDEBUG((LOG_DEBUG, "using %s for loopback", loop_name));
+
+ if (tcgetattr(loop_slave, &tios) == 0) {
+ tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
+ tios.c_cflag |= CS8 | CREAD;
+ tios.c_iflag = IGNPAR;
+ tios.c_oflag = 0;
+ tios.c_lflag = 0;
+ if (tcsetattr(loop_slave, TCSAFLUSH, &tios) < 0)
+ syslog(LOG_WARNING, "couldn't set attributes on loopback: %m");
+ }
+
+ if ((flags = fcntl(loop_master, F_GETFL)) != -1)
+ if (fcntl(loop_master, F_SETFL, flags | O_NONBLOCK) == -1)
+ syslog(LOG_WARNING, "couldn't set loopback to nonblock: %m");
+
+ ppp_fd = loop_slave;
+ if (ioctl(ppp_fd, TIOCSETD, &pppdisc) < 0) {
+ syslog(LOG_ERR, "ioctl(TIOCSETD): %m");
+ die(1);
+ }
+
+ /*
+ * Find out which interface we were given.
+ */
+ if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0) {
+ syslog(LOG_ERR, "ioctl(PPPIOCGUNIT): %m");
+ die(1);
+ }
+
+ /*
+ * Enable debug in the driver if requested.
+ */
+ if (kdebugflag) {
+ if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
+ syslog(LOG_WARNING, "ioctl (PPPIOCGFLAGS): %m");
+ } else {
+ flags |= (kdebugflag & 0xFF) * SC_DEBUG;
+ if (ioctl(ppp_fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0)
+ syslog(LOG_WARNING, "ioctl(PPPIOCSFLAGS): %m");
+ }
+ }
+