pppd: add experimental support for PEAP protocol, an extension of EAP

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index f5597f6a6593db0ee00aeed7150ed725a0fc5e8e..cd4b9eba3a49ceb5bd87eaea702500b864f9552f 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -55,8 +55,8 @@ non-privileged user.
 .I speed
 An option that is a decimal number is taken as the desired baud rate
 for the serial device.  On systems such as
 .I speed
 An option that is a decimal number is taken as the desired baud rate
 for the serial device.  On systems such as

-4.4BSD and NetBSD, any speed can be specified.  Other systems
-(e.g. Linux, SunOS) only support the commonly-used baud rates.
+Linux, 4.4BSD and NetBSD, any speed can be specified.  Other systems
+(e.g. SunOS) only support the commonly-used baud rates.

 .TP
 .B asyncmap \fImap
 This option sets the Async-Control-Character-Map (ACCM) for this end
 .TP
 .B asyncmap \fImap
 This option sets the Async-Control-Character-Map (ACCM) for this end


@@ -127,12 +127,6 @@ is no other default route with the same metric.  With the default
 value of -1, the route is only added if there is no default route at
 all.
 .TP
 value of -1, the route is only added if there is no default route at
 all.
 .TP

-.B defaultroute6
-Add a default IPv6 route to the system routing tables, using the peer as
-the gateway, when IPv6CP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute6\fR option has been specified.
-.TP

 .B replacedefaultroute
 This option is a flag to the defaultroute option. If defaultroute is
 set and this flag is also set, pppd replaces an existing default route
 .B replacedefaultroute
 This option is a flag to the defaultroute option. If defaultroute is
 set and this flag is also set, pppd replaces an existing default route


@@ -354,6 +348,17 @@ Disable MRU [Maximum Receive Unit] negotiation.  With this option,
 pppd will use the default MRU value of 1500 bytes for both the
 transmit and receive direction.
 .TP
 pppd will use the default MRU value of 1500 bytes for both the
 transmit and receive direction.
 .TP

+.B defaultroute6
+Add a default IPv6 route to the system routing tables, using the peer as
+the gateway, when IPv6CP negotiation is successfully completed.
+This entry is removed when the PPP connection is broken.  This option
+is privileged if the \fInodefaultroute6\fR option has been specified.
+\fBWARNING: Do not enable this option by default\fR.  IPv6 routing tables
+are managed by kernel (as apposite to IPv4) and IPv6 default route is
+configured by kernel automatically too based on ICMPv6 Router Advertisement
+packets.  This option may conflict with kernel IPv6 route setup and should
+be used only for broken IPv6 networks.
+.TP

 .B deflate \fInr,nt
 Request that the peer compress packets that it sends, using the
 Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
 .B deflate \fInr,nt
 Request that the peer compress packets that it sends, using the
 Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and


@@ -1765,6 +1770,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP

+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP

 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.