Merge pull request #230 from tisj/eap-mschapv2-refactor

[ppp.git] / pppd / pppd.8

diff --git a/pppd/pppd.8 b/pppd/pppd.8
index 85af954bf25baca2e9cc4f91953beb2a46af1787..781f4dbf109e2dcf723027a7fb548afa57ea1f7c 100644 (file)
--- a/pppd/pppd.8
+++ b/pppd/pppd.8
@@ -133,6 +133,11 @@ the gateway, when IPv6CP negotiation is successfully completed.
 This entry is removed when the PPP connection is broken.  This option
 is privileged if the \fInodefaultroute6\fR option has been specified.
 .TP
 This entry is removed when the PPP connection is broken.  This option
 is privileged if the \fInodefaultroute6\fR option has been specified.
 .TP

+.B replacedefaultroute
+This option is a flag to the defaultroute option. If defaultroute is
+set and this flag is also set, pppd replaces an existing default route
+with the new default route.  This option is privileged.
+.TP

 .B disconnect \fIscript
 Execute the command specified by \fIscript\fR, by passing it to a
 shell, after
 .B disconnect \fIscript
 Execute the command specified by \fIscript\fR, by passing it to a
 shell, after


@@ -298,6 +303,12 @@ to \fIn\fR seconds (default 3).
 .B chap-timeout \fIn
 Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
 .TP
 .B chap-timeout \fIn
 Set timeout for CHAP authentication by peer to \fIn\fR seconds (default 60).
 .TP

+.B chapms\-strip\-domain
+Some Windows 9x/ME clients might be transmitting the MS domain before the
+username in the provided client name. This option enables stripping the domain
+from the client name on the server side before matching it against the secret
+file.
+.TP

 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit
 .B child\-timeout \fIn
 When exiting, wait for up to \fIn\fR seconds for any child processes
 (such as the command specified with the \fBpty\fR command) to exit


@@ -482,6 +493,18 @@ to send configure-Rejects instead to \fIn\fR (default 10).
 Set the maximum number of IPCP terminate-request transmissions to
 \fIn\fR (default 3).
 .TP
 Set the maximum number of IPCP terminate-request transmissions to
 \fIn\fR (default 3).
 .TP

+.B ipcp\-no\-address
+Disable negotiation of addresses via IP-Address IPCP option.
+.TP
+.B ipcp\-no\-addresses
+Disable negotiation of addresses via old-style deprecated IP-Addresses
+IPCP option. pppd by default try to use new-style IP-Address IPCP option.
+If new-style is not supported by peer or is disabled by \fBipcp\-no\-address\fR
+option then pppd fallbacks to old-style deprecated IP-Addresses IPCP option.
+When both new-style and old-style are disabled by both \fBipcp\-no\-address\fR
+and \fBipcp\-no\-addresses\fR options then negotiation of IP addresses
+is completely disabled.
+.TP

 .B ipcp\-restart \fIn
 Set the IPCP restart interval (retransmission timeout) to \fIn\fR
 seconds (default 3).
 .B ipcp\-restart \fIn
 Set the IPCP restart interval (retransmission timeout) to \fIn\fR
 seconds (default 3).


@@ -792,9 +815,13 @@ disable both forms of hardware flow control.
 .TP
 .B nodefaultroute
 Disable the \fIdefaultroute\fR option.  The system administrator who
 .TP
 .B nodefaultroute
 Disable the \fIdefaultroute\fR option.  The system administrator who

-wishes to prevent users from creating default routes with pppd
+wishes to prevent users from adding a default route with pppd

 can do so by placing this option in the /etc/ppp/options file.
 .TP
 can do so by placing this option in the /etc/ppp/options file.
 .TP

+.B noreplacedefaultroute
+Disable the \fIreplacedefaultroute\fR option. This allows to disable a
+\fIreplacedefaultroute\fR option set previously in the configuration.
+.TP

 .B nodefaultroute6
 Disable the \fIdefaultroute6\fR option.  The system administrator who
 wishes to prevent users from adding a default route with pppd
 .B nodefaultroute6
 Disable the \fIdefaultroute6\fR option.  The system administrator who
 wishes to prevent users from adding a default route with pppd


@@ -909,6 +936,9 @@ situation, the ppp interface can be used for routing by creating
 device routes, but the peer itself cannot be addressed directly for IP
 traffic.
 .TP
 device routes, but the peer itself cannot be addressed directly for IP
 traffic.
 .TP

+.B nosendip
+Don't send our local IP address to peer during IP address negotiation.
+.TP

 .B notty
 Normally, pppd requires a terminal device.  With this option, pppd
 will allocate itself a pseudo-tty master/slave pair and use the slave
 .B notty
 Normally, pppd requires a terminal device.  With this option, pppd
 will allocate itself a pseudo-tty master/slave pair and use the slave


@@ -1204,7 +1234,7 @@ Use software flow control (i.e. XON/XOFF) to control the flow of data on
 the serial port.
 .SH PPPOE OPTIONS
 To establish PPP link over Ethernet (PPPoE) it is needed to load pppd's
 the serial port.
 .SH PPPOE OPTIONS
 To establish PPP link over Ethernet (PPPoE) it is needed to load pppd's

-\fBplugin rp-pppoe.so\fR and then specify option \fBnic-\fIinterface\fR
+\fBplugin pppoe.so\fR and then specify option \fBnic-\fIinterface\fR

 instead of modem options \fIttyname\fR and \fIspeed\fR.
 Recognized pppd's PPPoE options are:
 .TP
 instead of modem options \fIttyname\fR and \fIspeed\fR.
 Recognized pppd's PPPoE options are:
 .TP


@@ -1215,24 +1245,30 @@ by specifying ppp'd option \fBnic-eth0\fR. Prefix \fBnic-\fR for this
 option may be avoided if interface name is unambiguous and does not
 look like any other pppd's option.
 .TP
 option may be avoided if interface name is unambiguous and does not
 look like any other pppd's option.
 .TP

-.B rp_pppoe_service \fIname
-Connect to specified PPPoE service name.
+.B pppoe-service \fIname
+Connect to specified PPPoE service name. For backward compatibility also
+\fBrp_pppoe_service\fP option name is supported.

 .TP
 .TP

-.B rp_pppoe_ac \fIname
-Connect to specified PPPoE access concentrator name.
+.B pppoe-ac \fIname
+Connect to specified PPPoE access concentrator name. For backward
+compatibility also \fBrp_pppoe_ac\fP option name is supported.

 .TP
 .TP

-.B rp_pppoe_sess \fIsessid\fP:\fImacaddr
-Attach to existing PPPoE session.
+.B pppoe-sess \fIsessid\fP:\fImacaddr
+Attach to existing PPPoE session. For backward compatibility also
+\fBrp_pppoe_sess\fP option name is supported.

 .TP
 .TP

-.B rp_pppoe_verbose \fIn
-Be verbose about discovered access concentrators.
+.B pppoe-verbose \fIn
+Be verbose about discovered access concentrators. For backward
+compatibility also \fBrp_pppoe_verbose\fP option name is supported.

 .TP
 .B pppoe-mac \fImacaddr
 Connect to specified MAC address.
 .TP
 .TP
 .B pppoe-mac \fImacaddr
 Connect to specified MAC address.
 .TP

-.B host-uniq \fIstring
+.B pppoe-host-uniq \fIstring

 Set the PPPoE Host-Uniq tag to the supplied hex string.
 By default PPPoE Host-Uniq tag is set to the pppd's process PID.
 Set the PPPoE Host-Uniq tag to the supplied hex string.
 By default PPPoE Host-Uniq tag is set to the pppd's process PID.

+For backward compatibility this option may be specified without
+\fBpppoe-\fP prefix.

 .TP
 .B pppoe-padi-timeout \fIn
 Initial timeout for discovery packets in seconds (default 5).
 .TP
 .B pppoe-padi-timeout \fIn
 Initial timeout for discovery packets in seconds (default 5).


@@ -1729,6 +1765,14 @@ IPCP has come up.
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP
 The IP address for the remote end of the link.  This is only set when
 IPCP has come up.
 .TP

+.B LLLOCAL
+The Link-Local IPv6 address for the local end of the link.  This is only
+set when IPV6CP has come up.
+.TP
+.B LLREMOTE
+The Link-Local IPv6 address for the remote end of the link.  This is only
+set when IPV6CP has come up.
+.TP

 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.
 .B PEERNAME
 The authenticated name of the peer.  This is only set if the peer
 authenticates itself.