+Enables connection debugging facilities.
+If this option is given, pppd will log the contents of all
+control packets sent or received in a readable form. The packets are
+logged through syslog with facility \fIdaemon\fR and level
+\fIdebug\fR. This information can be directed to a file by setting up
+/etc/syslog.conf appropriately (see syslog.conf(5)).
+.TP
+.B default-asyncmap
+Disable asyncmap negotiation, forcing all control characters to be
+escaped for both the transmit and the receive direction.
+.TP
+.B default-mru
+Disable MRU [Maximum Receive Unit] negotiation. With this option,
+pppd will use the default MRU value of 1500 bytes for both the
+transmit and receive direction.
+.TP
+.B deflate \fInr,nt
+Request that the peer compress packets that it sends, using the
+Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
+agree to compress packets sent to the peer with a maximum window size
+of \fI2**nt\fR bytes. If \fInt\fR is not specified, it defaults to
+the value given for \fInr\fR. Values in the range 8 to 15 may be used
+for \fInr\fR and \fInt\fR; larger values give better compression but
+consume more kernel memory for compression dictionaries.
+Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
+compression in the corresponding direction. Use \fInodeflate\fR or
+\fIdeflate 0\fR to disable Deflate compression entirely. (Note: pppd
+requests Deflate compression in preference to BSD-Compress if the peer
+can do either.)
+.TP
+.B demand
+Initiate the link only on demand, i.e. when data traffic is present.
+With this option, the remote IP address must be specified by the user
+on the command line or in an options file. Pppd will initially
+configure the interface and enable it for IP traffic without
+connecting to the peer. When traffic is available, pppd will
+connect to the peer and perform negotiation, authentication, etc.
+When this is completed, pppd will commence passing data packets
+(i.e., IP packets) across the link.
+
+The \fIdemand\fR option implies the \fIpersist\fR option. If this
+behaviour is not desired, use the \fInopersist\fR option after the
+\fIdemand\fR option. The \fIidle\fR and \fIholdoff\fR
+options are also useful in conjuction with the \fIdemand\fR option.
+.TP
+.B domain \fId
+Append the domain name \fId\fR to the local host name for authentication
+purposes. For example, if gethostname() returns the name porsche, but
+the fully qualified domain name is porsche.Quotron.COM, you could
+specify \fIdomain Quotron.COM\fR. Pppd would then use the name
+\fIporsche.Quotron.COM\fR for looking up secrets in the secrets file,
+and as the default name to send to the peer when authenticating itself
+to the peer. This option is privileged.
+.TP
+.B holdoff \fIn
+Specifies how many seconds to wait before re-initiating the link after
+it terminates. This option only has any effect if the \fIpersist\fR
+or \fIdemand\fR option is used. The holdoff period is not applied if
+the link was terminated because it was idle.
+.TP
+.B idle \fIn
+Specifies that pppd should disconnect if the link is idle for \fIn\fR
+seconds. The link is idle when no data packets (i.e. IP packets) are
+being sent or received. Note: it is not advisable to use this option
+with the \fIpersist\fR option without the \fIdemand\fR option.
+If the \fBactive-filter\fR
+option is given, data packets which are rejected by the specified
+activity filter also count as the link being idle.
+.TP
+.B ipcp-accept-local
+With this option, pppd will accept the peer's idea of our local IP
+address, even if the local IP address was specified in an option.