+.B dryrun
+With the \fBdryrun\fR option, pppd will print out all the option
+values which have been set and then exit, after parsing the command
+line and options files and checking the option values, but before
+initiating the link. The option values are logged at level info, and
+also printed to standard output unless the device on standard output
+is the device that pppd would be using to communicate with the peer.
+.TP
+.B dump
+With the \fBdump\fR option, pppd will print out all the option values
+which have been set. This option is like the \fBdryrun\fR option
+except that pppd proceeds as normal rather than exiting.
+.TP
+.B endpoint \fI<epdisc>
+Sets the endpoint discriminator sent by the local machine to the peer
+during multilink negotiation to \fI<epdisc>\fR. The default is to use
+the MAC address of the first ethernet interface on the system, if any,
+otherwise the IPv4 address corresponding to the hostname, if any,
+provided it is not in the multicast or locally-assigned IP address
+ranges, or the localhost address. The endpoint discriminator can be
+the string \fBnull\fR or of the form \fItype\fR:\fIvalue\fR, where
+type is a decimal number or one of the strings \fBlocal\fR, \fBIP\fR,
+\fBMAC\fR, \fBmagic\fR, or \fBphone\fR. The value is an IP address in
+dotted-decimal notation for the \fBIP\fR type, or a string of bytes in
+hexadecimal, separated by periods or colons for the other types. For
+the MAC type, the value may also be the name of an ethernet or similar
+network interface. This option is currently only available under
+Linux.
+.TP
+.B eap-interval \fIn
+If this option is given and pppd authenticates the peer with EAP
+(i.e., is the server), pppd will restart EAP authentication every
+\fIn\fR seconds. For EAP SRP-SHA1, see also the \fBsrp-interval\fR
+option, which enables lightweight rechallenge.
+.TP
+.B eap-max-rreq \fIn
+Set the maximum number of EAP Requests to which pppd will respond (as
+a client) without hearing EAP Success or Failure. (Default is 20.)
+.TP
+.B eap-max-sreq \fIn
+Set the maximum number of EAP Requests that pppd will issue (as a
+server) while attempting authentication. (Default is 10.)
+.TP
+.B eap-restart \fIn
+Set the retransmit timeout for EAP Requests when acting as a server
+(authenticator). (Default is 3 seconds.)
+.TP
+.B eap-timeout \fIn
+Set the maximum time to wait for the peer to send an EAP Request when
+acting as a client (authenticatee). (Default is 20 seconds.)
+.TP