2 * ccp.c - PPP Compression Control Protocol.
4 * Copyright (c) 1994-2002 Paul Mackerras. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
13 * 2. The name(s) of the authors of this software must not be used to
14 * endorse or promote products derived from this software without
15 * prior written permission.
17 * 3. Redistributions of any form whatsoever must retain the following
19 * "This product includes software developed by Paul Mackerras
20 * <paulus@samba.org>".
22 * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
23 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
24 * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
25 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
26 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
27 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
28 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
35 #define RCSID "$Id: ccp.c,v 1.50 2005/06/26 19:34:41 carlsonj Exp $"
43 #include <net/ppp-comp.h>
47 #include "lcp.h" /* lcp_close(), lcp_fsm */
51 * Unfortunately there is a bug in zlib which means that using a
52 * size of 8 (window size = 256) for Deflate compression will cause
53 * buffer overruns and kernel crashes in the deflate module.
54 * Until this is fixed we only accept sizes in the range 9 .. 15.
55 * Thanks to James Carlson for pointing this out.
57 #define DEFLATE_MIN_WORKS 9
60 * Command-line options.
62 static int setbsdcomp (char **);
63 static int setdeflate (char **);
64 static char bsd_value[8];
65 static char deflate_value[8];
71 bool refuse_mppe_stateful = 1; /* Allow stateful mode? */
74 static option_t ccp_option_list[] = {
75 { "noccp", o_bool, &ccp_protent.enabled_flag,
76 "Disable CCP negotiation" },
77 { "-ccp", o_bool, &ccp_protent.enabled_flag,
78 "Disable CCP negotiation", OPT_ALIAS },
80 { "bsdcomp", o_special, (void *)setbsdcomp,
81 "Request BSD-Compress packet compression",
82 OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value },
83 { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
84 "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR,
85 &ccp_allowoptions[0].bsd_compress },
86 { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
87 "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
88 &ccp_allowoptions[0].bsd_compress },
90 { "deflate", o_special, (void *)setdeflate,
91 "request Deflate compression",
92 OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value },
93 { "nodeflate", o_bool, &ccp_wantoptions[0].deflate,
94 "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR,
95 &ccp_allowoptions[0].deflate },
96 { "-deflate", o_bool, &ccp_wantoptions[0].deflate,
97 "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
98 &ccp_allowoptions[0].deflate },
100 { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft,
101 "don't use draft deflate #", OPT_A2COPY,
102 &ccp_allowoptions[0].deflate_draft },
104 { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
105 "request Predictor-1", OPT_PRIO | 1 },
106 { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1,
107 "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR,
108 &ccp_allowoptions[0].predictor_1 },
109 { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
110 "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
111 &ccp_allowoptions[0].predictor_1 },
114 /* MPPE options are symmetrical ... we only set wantoptions here */
115 { "require-mppe", o_bool, &ccp_wantoptions[0].mppe,
116 "require MPPE encryption",
117 OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
118 { "+mppe", o_bool, &ccp_wantoptions[0].mppe,
119 "require MPPE encryption",
120 OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
121 { "nomppe", o_bool, &ccp_wantoptions[0].mppe,
122 "don't allow MPPE encryption", OPT_PRIO },
123 { "-mppe", o_bool, &ccp_wantoptions[0].mppe,
124 "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO },
126 /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */
127 { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
128 "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
129 &ccp_wantoptions[0].mppe },
130 { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe,
131 "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
132 &ccp_wantoptions[0].mppe },
133 { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe,
134 "don't allow MPPE 40-bit encryption",
135 OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe },
136 { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
137 "don't allow MPPE 40-bit encryption",
138 OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40,
139 &ccp_wantoptions[0].mppe },
141 { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
142 "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
143 &ccp_wantoptions[0].mppe },
144 { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe,
145 "require MPPE 128-bit encryption",
146 OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
147 &ccp_wantoptions[0].mppe },
148 { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe,
149 "don't allow MPPE 128-bit encryption",
150 OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe },
151 { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
152 "don't allow MPPE 128-bit encryption",
153 OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128,
154 &ccp_wantoptions[0].mppe },
156 /* strange one; we always request stateless, but will we allow stateful? */
157 { "mppe-stateful", o_bool, &refuse_mppe_stateful,
158 "allow MPPE stateful mode", OPT_PRIO },
159 { "nomppe-stateful", o_bool, &refuse_mppe_stateful,
160 "disallow MPPE stateful mode", OPT_PRIO | 1 },
167 * Protocol entry points from main code.
169 static void ccp_init (int unit);
170 static void ccp_open (int unit);
171 static void ccp_close (int unit, char *);
172 static void ccp_lowerup (int unit);
173 static void ccp_lowerdown (int);
174 static void ccp_input (int unit, u_char *pkt, int len);
175 static void ccp_protrej (int unit);
176 static int ccp_printpkt (u_char *pkt, int len,
177 void (*printer)(void *, char *, ...),
179 static void ccp_datainput (int unit, u_char *pkt, int len);
181 struct protent ccp_protent = {
201 fsm ccp_fsm[NUM_PPP];
202 ccp_options ccp_wantoptions[NUM_PPP]; /* what to request the peer to use */
203 ccp_options ccp_gotoptions[NUM_PPP]; /* what the peer agreed to do */
204 ccp_options ccp_allowoptions[NUM_PPP]; /* what we'll agree to do */
205 ccp_options ccp_hisoptions[NUM_PPP]; /* what we agreed to do */
208 * Callbacks for fsm code.
210 static void ccp_resetci (fsm *);
211 static int ccp_cilen (fsm *);
212 static void ccp_addci (fsm *, u_char *, int *);
213 static int ccp_ackci (fsm *, u_char *, int);
214 static int ccp_nakci (fsm *, u_char *, int, int);
215 static int ccp_rejci (fsm *, u_char *, int);
216 static int ccp_reqci (fsm *, u_char *, int *, int);
217 static void ccp_up (fsm *);
218 static void ccp_down (fsm *);
219 static int ccp_extcode (fsm *, int, int, u_char *, int);
220 static void ccp_rack_timeout (void *);
221 static char *method_name (ccp_options *, ccp_options *);
223 static fsm_callbacks ccp_callbacks = {
242 * Do we want / did we get any compression?
244 #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \
245 || (opt).predictor_1 || (opt).predictor_2 \
249 * Local state (mainly for handling reset-reqs and reset-acks).
251 static int ccp_localstate[NUM_PPP];
252 #define RACK_PENDING 1 /* waiting for reset-ack */
253 #define RREQ_REPEAT 2 /* send another reset-req if no reset-ack */
255 #define RACKTIMEOUT 1 /* second */
257 static int all_rejected[NUM_PPP]; /* we rejected all peer's options */
263 setbsdcomp(char **argv)
269 abits = rbits = strtol(str, &endp, 0);
270 if (endp != str && *endp == ',') {
272 abits = strtol(str, &endp, 0);
274 if (*endp != 0 || endp == str) {
275 option_error("invalid parameter '%s' for bsdcomp option", *argv);
278 if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS))
279 || (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) {
280 option_error("bsdcomp option values must be 0 or %d .. %d",
281 BSD_MIN_BITS, BSD_MAX_BITS);
285 ccp_wantoptions[0].bsd_compress = 1;
286 ccp_wantoptions[0].bsd_bits = rbits;
288 ccp_wantoptions[0].bsd_compress = 0;
290 ccp_allowoptions[0].bsd_compress = 1;
291 ccp_allowoptions[0].bsd_bits = abits;
293 ccp_allowoptions[0].bsd_compress = 0;
294 slprintf(bsd_value, sizeof(bsd_value),
295 rbits == abits? "%d": "%d,%d", rbits, abits);
301 setdeflate(char **argv)
307 abits = rbits = strtol(str, &endp, 0);
308 if (endp != str && *endp == ',') {
310 abits = strtol(str, &endp, 0);
312 if (*endp != 0 || endp == str) {
313 option_error("invalid parameter '%s' for deflate option", *argv);
316 if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE))
317 || (abits != 0 && (abits < DEFLATE_MIN_SIZE
318 || abits > DEFLATE_MAX_SIZE))) {
319 option_error("deflate option values must be 0 or %d .. %d",
320 DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE);
323 if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) {
324 if (rbits == DEFLATE_MIN_SIZE)
325 rbits = DEFLATE_MIN_WORKS;
326 if (abits == DEFLATE_MIN_SIZE)
327 abits = DEFLATE_MIN_WORKS;
328 warn("deflate option value of %d changed to %d to avoid zlib bug",
329 DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS);
332 ccp_wantoptions[0].deflate = 1;
333 ccp_wantoptions[0].deflate_size = rbits;
335 ccp_wantoptions[0].deflate = 0;
337 ccp_allowoptions[0].deflate = 1;
338 ccp_allowoptions[0].deflate_size = abits;
340 ccp_allowoptions[0].deflate = 0;
341 slprintf(deflate_value, sizeof(deflate_value),
342 rbits == abits? "%d": "%d,%d", rbits, abits);
348 * ccp_init - initialize CCP.
353 fsm *f = &ccp_fsm[unit];
356 f->protocol = PPP_CCP;
357 f->callbacks = &ccp_callbacks;
360 memset(&ccp_wantoptions[unit], 0, sizeof(ccp_options));
361 memset(&ccp_gotoptions[unit], 0, sizeof(ccp_options));
362 memset(&ccp_allowoptions[unit], 0, sizeof(ccp_options));
363 memset(&ccp_hisoptions[unit], 0, sizeof(ccp_options));
365 ccp_wantoptions[0].deflate = 1;
366 ccp_wantoptions[0].deflate_size = DEFLATE_MAX_SIZE;
367 ccp_wantoptions[0].deflate_correct = 1;
368 ccp_wantoptions[0].deflate_draft = 1;
369 ccp_allowoptions[0].deflate = 1;
370 ccp_allowoptions[0].deflate_size = DEFLATE_MAX_SIZE;
371 ccp_allowoptions[0].deflate_correct = 1;
372 ccp_allowoptions[0].deflate_draft = 1;
374 ccp_wantoptions[0].bsd_compress = 1;
375 ccp_wantoptions[0].bsd_bits = BSD_MAX_BITS;
376 ccp_allowoptions[0].bsd_compress = 1;
377 ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
379 ccp_allowoptions[0].predictor_1 = 1;
383 * ccp_open - CCP is allowed to come up.
388 fsm *f = &ccp_fsm[unit];
390 if (f->state != OPENED)
391 ccp_flags_set(unit, 1, 0);
394 * Find out which compressors the kernel supports before
395 * deciding whether to open in silent mode.
398 if (!ANY_COMPRESS(ccp_gotoptions[unit]))
399 f->flags |= OPT_SILENT;
405 * ccp_close - Terminate CCP.
408 ccp_close(int unit, char *reason)
410 ccp_flags_set(unit, 0, 0);
411 fsm_close(&ccp_fsm[unit], reason);
415 * ccp_lowerup - we may now transmit CCP packets.
418 ccp_lowerup(int unit)
420 fsm_lowerup(&ccp_fsm[unit]);
424 * ccp_lowerdown - we may not transmit CCP packets.
427 ccp_lowerdown(int unit)
429 fsm_lowerdown(&ccp_fsm[unit]);
433 * ccp_input - process a received CCP packet.
436 ccp_input(int unit, u_char *p, int len)
438 fsm *f = &ccp_fsm[unit];
442 * Check for a terminate-request so we can print a message.
445 fsm_input(f, p, len);
446 if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) {
447 notice("Compression disabled by peer.");
449 if (ccp_gotoptions[unit].mppe) {
450 error("MPPE disabled, closing LCP");
451 lcp_close(unit, "MPPE disabled by peer");
457 * If we get a terminate-ack and we're not asking for compression,
460 if (oldstate == REQSENT && p[0] == TERMACK
461 && !ANY_COMPRESS(ccp_gotoptions[unit]))
462 ccp_close(unit, "No compression negotiated");
466 * Handle a CCP-specific code.
469 ccp_extcode(fsm *f, int code, int id, u_char *p, int len)
473 if (f->state != OPENED)
475 /* send a reset-ack, which the transmitter will see and
476 reset its compression state. */
477 fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
481 if (ccp_localstate[f->unit] & RACK_PENDING && id == f->reqid) {
482 ccp_localstate[f->unit] &= ~(RACK_PENDING | RREQ_REPEAT);
483 UNTIMEOUT(ccp_rack_timeout, f);
495 * ccp_protrej - peer doesn't talk CCP.
498 ccp_protrej(int unit)
500 ccp_flags_set(unit, 0, 0);
501 fsm_lowerdown(&ccp_fsm[unit]);
504 if (ccp_gotoptions[unit].mppe) {
505 error("MPPE required but peer negotiation failed");
506 lcp_close(unit, "MPPE required but peer negotiation failed");
513 * ccp_resetci - initialize at start of negotiation.
518 ccp_options *go = &ccp_gotoptions[f->unit];
519 u_char opt_buf[CCP_MAX_OPTION_LENGTH];
521 *go = ccp_wantoptions[f->unit];
522 all_rejected[f->unit] = 0;
526 ccp_options *ao = &ccp_allowoptions[f->unit];
527 int auth_mschap_bits = auth_done[f->unit];
529 int auth_eap_bits = auth_done[f->unit];
534 * Start with a basic sanity check: mschap[v2] auth must be in
535 * exactly one direction. RFC 3079 says that the keys are
536 * 'derived from the credentials of the peer that initiated the call',
537 * however the PPP protocol doesn't have such a concept, and pppd
538 * cannot get this info externally. Instead we do the best we can.
539 * NB: If MPPE is required, all other compression opts are invalid.
540 * So, we return right away if we can't do it.
543 /* Leave only the mschap auth bits set */
544 auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER |
545 CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
546 /* Count the mschap auths */
547 auth_mschap_bits >>= CHAP_MS_SHIFT;
550 numbits += auth_mschap_bits & 1;
551 auth_mschap_bits >>= 1;
552 } while (auth_mschap_bits);
554 error("MPPE required, but auth done in both directions.");
555 lcp_close(f->unit, "MPPE required but not available");
561 * MPPE is also possible in combination with EAP-TLS.
562 * It is not possible to detect if we're doing EAP or EAP-TLS
563 * at this stage, hence we accept all forms of EAP. If TLS is
564 * not used then the MPPE keys will not be derived anyway.
566 /* Leave only the eap auth bits set */
567 auth_eap_bits &= (EAP_WITHPEER | EAP_PEER );
569 if ((numbits == 0) && (auth_eap_bits == 0)) {
570 error("MPPE required, but MS-CHAP[v2] nor EAP-TLS auth are performed.");
573 error("MPPE required, but MS-CHAP[v2] auth not performed.");
575 lcp_close(f->unit, "MPPE required but not available");
579 /* A plugin (eg radius) may not have obtained key material. */
580 if (!mppe_keys_isset()) {
581 error("MPPE required, but keys are not available. "
582 "Possible plugin problem?");
583 lcp_close(f->unit, "MPPE required but not available");
587 /* LM auth not supported for MPPE */
588 if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) {
589 /* This might be noise */
590 if (go->mppe & MPPE_OPT_40) {
591 notice("Disabling 40-bit MPPE; MS-CHAP LM not supported");
592 go->mppe &= ~MPPE_OPT_40;
593 ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40;
597 /* Last check: can we actually negotiate something? */
598 if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) {
599 /* Could be misconfig, could be 40-bit disabled above. */
600 error("MPPE required, but both 40-bit and 128-bit disabled.");
601 lcp_close(f->unit, "MPPE required but not available");
607 /* MPPE is not compatible with other compression types */
608 ao->bsd_compress = go->bsd_compress = 0;
609 ao->predictor_1 = go->predictor_1 = 0;
610 ao->predictor_2 = go->predictor_2 = 0;
611 ao->deflate = go->deflate = 0;
616 * Check whether the kernel knows about the various
617 * compression methods we might request.
621 opt_buf[0] = CI_MPPE;
622 opt_buf[1] = CILEN_MPPE;
623 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
624 /* Key material unimportant here. */
625 if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) {
626 error("MPPE required, but kernel has no support.");
627 lcp_close(f->unit, "MPPE required but not available");
631 if (go->bsd_compress) {
632 opt_buf[0] = CI_BSD_COMPRESS;
633 opt_buf[1] = CILEN_BSD_COMPRESS;
634 opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, BSD_MIN_BITS);
635 if (ccp_test(f->unit, opt_buf, CILEN_BSD_COMPRESS, 0) <= 0)
636 go->bsd_compress = 0;
639 if (go->deflate_correct) {
640 opt_buf[0] = CI_DEFLATE;
641 opt_buf[1] = CILEN_DEFLATE;
642 opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
643 opt_buf[3] = DEFLATE_CHK_SEQUENCE;
644 if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
645 go->deflate_correct = 0;
647 if (go->deflate_draft) {
648 opt_buf[0] = CI_DEFLATE_DRAFT;
649 opt_buf[1] = CILEN_DEFLATE;
650 opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
651 opt_buf[3] = DEFLATE_CHK_SEQUENCE;
652 if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
653 go->deflate_draft = 0;
655 if (!go->deflate_correct && !go->deflate_draft)
658 if (go->predictor_1) {
659 opt_buf[0] = CI_PREDICTOR_1;
660 opt_buf[1] = CILEN_PREDICTOR_1;
661 if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_1, 0) <= 0)
664 if (go->predictor_2) {
665 opt_buf[0] = CI_PREDICTOR_2;
666 opt_buf[1] = CILEN_PREDICTOR_2;
667 if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_2, 0) <= 0)
673 * ccp_cilen - Return total length of our configuration info.
678 ccp_options *go = &ccp_gotoptions[f->unit];
680 return (go->bsd_compress? CILEN_BSD_COMPRESS: 0)
681 + (go->deflate && go->deflate_correct? CILEN_DEFLATE: 0)
682 + (go->deflate && go->deflate_draft? CILEN_DEFLATE: 0)
683 + (go->predictor_1? CILEN_PREDICTOR_1: 0)
684 + (go->predictor_2? CILEN_PREDICTOR_2: 0)
685 + (go->mppe? CILEN_MPPE: 0);
689 * ccp_addci - put our requests in a packet.
692 ccp_addci(fsm *f, u_char *p, int *lenp)
695 ccp_options *go = &ccp_gotoptions[f->unit];
699 * Add the compression types that we can receive, in decreasing
700 * preference order. Get the kernel to allocate the first one
701 * in case it gets Acked.
705 u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
707 p[0] = opt_buf[0] = CI_MPPE;
708 p[1] = opt_buf[1] = CILEN_MPPE;
709 MPPE_OPTS_TO_CI(go->mppe, &p[2]);
710 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
711 mppe_get_recv_key(&opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN);
712 res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0);
716 /* This shouldn't happen, we've already tested it! */
717 lcp_close(f->unit, "MPPE required but not available in kernel");
721 p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
722 p[1] = CILEN_DEFLATE;
723 p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
724 p[3] = DEFLATE_CHK_SEQUENCE;
729 if (go->deflate_size < DEFLATE_MIN_WORKS) {
733 res = ccp_test(f->unit, p, CILEN_DEFLATE, 0);
737 } else if (res < 0) {
742 p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
745 if (p != p0 && go->deflate_correct && go->deflate_draft) {
746 p[0] = CI_DEFLATE_DRAFT;
747 p[1] = CILEN_DEFLATE;
748 p[2] = p[2 - CILEN_DEFLATE];
749 p[3] = DEFLATE_CHK_SEQUENCE;
753 if (go->bsd_compress) {
754 p[0] = CI_BSD_COMPRESS;
755 p[1] = CILEN_BSD_COMPRESS;
756 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
758 p += CILEN_BSD_COMPRESS; /* not the first option */
761 if (go->bsd_bits < BSD_MIN_BITS) {
762 go->bsd_compress = 0;
765 res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 0);
767 p += CILEN_BSD_COMPRESS;
769 } else if (res < 0) {
770 go->bsd_compress = 0;
774 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
778 /* XXX Should Predictor 2 be preferable to Predictor 1? */
779 if (go->predictor_1) {
780 p[0] = CI_PREDICTOR_1;
781 p[1] = CILEN_PREDICTOR_1;
782 if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 0) <= 0) {
785 p += CILEN_PREDICTOR_1;
788 if (go->predictor_2) {
789 p[0] = CI_PREDICTOR_2;
790 p[1] = CILEN_PREDICTOR_2;
791 if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 0) <= 0) {
794 p += CILEN_PREDICTOR_2;
798 go->method = (p > p0)? p0[0]: -1;
804 * ccp_ackci - process a received configure-ack, and return
805 * 1 iff the packet was OK.
808 ccp_ackci(fsm *f, u_char *p, int len)
810 ccp_options *go = &ccp_gotoptions[f->unit];
815 u_char opt_buf[CILEN_MPPE];
817 opt_buf[0] = CI_MPPE;
818 opt_buf[1] = CILEN_MPPE;
819 MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
820 if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE))
824 /* XXX Cope with first/fast ack */
830 if (len < CILEN_DEFLATE
831 || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
832 || p[1] != CILEN_DEFLATE
833 || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
834 || p[3] != DEFLATE_CHK_SEQUENCE)
837 len -= CILEN_DEFLATE;
838 /* XXX Cope with first/fast ack */
841 if (go->deflate_correct && go->deflate_draft) {
842 if (len < CILEN_DEFLATE
843 || p[0] != CI_DEFLATE_DRAFT
844 || p[1] != CILEN_DEFLATE
845 || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
846 || p[3] != DEFLATE_CHK_SEQUENCE)
849 len -= CILEN_DEFLATE;
852 if (go->bsd_compress) {
853 if (len < CILEN_BSD_COMPRESS
854 || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS
855 || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
857 p += CILEN_BSD_COMPRESS;
858 len -= CILEN_BSD_COMPRESS;
859 /* XXX Cope with first/fast ack */
860 if (p == p0 && len == 0)
863 if (go->predictor_1) {
864 if (len < CILEN_PREDICTOR_1
865 || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1)
867 p += CILEN_PREDICTOR_1;
868 len -= CILEN_PREDICTOR_1;
869 /* XXX Cope with first/fast ack */
870 if (p == p0 && len == 0)
873 if (go->predictor_2) {
874 if (len < CILEN_PREDICTOR_2
875 || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2)
877 p += CILEN_PREDICTOR_2;
878 len -= CILEN_PREDICTOR_2;
879 /* XXX Cope with first/fast ack */
880 if (p == p0 && len == 0)
890 * ccp_nakci - process received configure-nak.
891 * Returns 1 iff the nak was OK.
894 ccp_nakci(fsm *f, u_char *p, int len, int treat_as_reject)
896 ccp_options *go = &ccp_gotoptions[f->unit];
897 ccp_options no; /* options we've seen already */
898 ccp_options try; /* options to ask for next time */
900 memset(&no, 0, sizeof(no));
904 if (go->mppe && len >= CILEN_MPPE
905 && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
908 * Peer wants us to use a different strength or other setting.
909 * Fail if we aren't willing to use his suggestion.
911 MPPE_CI_TO_OPTS(&p[2], try.mppe);
912 if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) {
913 error("Refusing MPPE stateful mode offered by peer");
915 } else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) {
916 /* Peer must have set options we didn't request (suggest) */
921 error("MPPE required but peer negotiation failed");
922 lcp_close(f->unit, "MPPE required but peer negotiation failed");
926 if (go->deflate && len >= CILEN_DEFLATE
927 && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
928 && p[1] == CILEN_DEFLATE) {
931 * Peer wants us to use a different code size or something.
932 * Stop asking for Deflate if we don't understand his suggestion.
934 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
935 || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS
936 || p[3] != DEFLATE_CHK_SEQUENCE)
938 else if (DEFLATE_SIZE(p[2]) < go->deflate_size)
939 try.deflate_size = DEFLATE_SIZE(p[2]);
941 len -= CILEN_DEFLATE;
942 if (go->deflate_correct && go->deflate_draft
943 && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
944 && p[1] == CILEN_DEFLATE) {
946 len -= CILEN_DEFLATE;
950 if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
951 && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
954 * Peer wants us to use a different number of bits
955 * or a different version.
957 if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION)
958 try.bsd_compress = 0;
959 else if (BSD_NBITS(p[2]) < go->bsd_bits)
960 try.bsd_bits = BSD_NBITS(p[2]);
961 p += CILEN_BSD_COMPRESS;
962 len -= CILEN_BSD_COMPRESS;
966 * Predictor-1 and 2 have no options, so they can't be Naked.
968 * There may be remaining options but we ignore them.
971 if (f->state != OPENED)
977 * ccp_rejci - reject some of our suggested compression methods.
980 ccp_rejci(fsm *f, u_char *p, int len)
982 ccp_options *go = &ccp_gotoptions[f->unit];
983 ccp_options try; /* options to request next time */
988 * Cope with empty configure-rejects by ceasing to send
989 * configure-requests.
991 if (len == 0 && all_rejected[f->unit])
995 if (go->mppe && len >= CILEN_MPPE
996 && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
997 error("MPPE required but peer refused");
998 lcp_close(f->unit, "MPPE required but peer refused");
1003 if (go->deflate_correct && len >= CILEN_DEFLATE
1004 && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) {
1005 if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
1006 || p[3] != DEFLATE_CHK_SEQUENCE)
1007 return 0; /* Rej is bad */
1008 try.deflate_correct = 0;
1010 len -= CILEN_DEFLATE;
1012 if (go->deflate_draft && len >= CILEN_DEFLATE
1013 && p[0] == CI_DEFLATE_DRAFT && p[1] == CILEN_DEFLATE) {
1014 if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
1015 || p[3] != DEFLATE_CHK_SEQUENCE)
1016 return 0; /* Rej is bad */
1017 try.deflate_draft = 0;
1019 len -= CILEN_DEFLATE;
1021 if (!try.deflate_correct && !try.deflate_draft)
1023 if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
1024 && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
1025 if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
1027 try.bsd_compress = 0;
1028 p += CILEN_BSD_COMPRESS;
1029 len -= CILEN_BSD_COMPRESS;
1031 if (go->predictor_1 && len >= CILEN_PREDICTOR_1
1032 && p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) {
1033 try.predictor_1 = 0;
1034 p += CILEN_PREDICTOR_1;
1035 len -= CILEN_PREDICTOR_1;
1037 if (go->predictor_2 && len >= CILEN_PREDICTOR_2
1038 && p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) {
1039 try.predictor_2 = 0;
1040 p += CILEN_PREDICTOR_2;
1041 len -= CILEN_PREDICTOR_2;
1047 if (f->state != OPENED)
1054 * ccp_reqci - processed a received configure-request.
1055 * Returns CONFACK, CONFNAK or CONFREJ and the packet modified
1059 ccp_reqci(fsm *f, u_char *p, int *lenp, int dont_nak)
1061 int ret, newret, res;
1063 int len, clen, type, nb;
1064 ccp_options *ho = &ccp_hisoptions[f->unit];
1065 ccp_options *ao = &ccp_allowoptions[f->unit];
1067 bool rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */
1068 /* CI_MPPE, or due to other options? */
1075 memset(ho, 0, sizeof(ccp_options));
1076 ho->method = (len > 0)? p[0]: -1;
1080 if (len < 2 || p[1] < 2 || p[1] > len) {
1092 if (!ao->mppe || clen != CILEN_MPPE) {
1096 MPPE_CI_TO_OPTS(&p[2], ho->mppe);
1098 /* Nak if anything unsupported or unknown are set. */
1099 if (ho->mppe & MPPE_OPT_UNSUPPORTED) {
1101 ho->mppe &= ~MPPE_OPT_UNSUPPORTED;
1103 if (ho->mppe & MPPE_OPT_UNKNOWN) {
1105 ho->mppe &= ~MPPE_OPT_UNKNOWN;
1108 /* Check state opt */
1109 if (ho->mppe & MPPE_OPT_STATEFUL) {
1111 * We can Nak and request stateless, but it's a
1112 * lot easier to just assume the peer will request
1113 * it if he can do it; stateful mode is bad over
1114 * the Internet -- which is where we expect MPPE.
1116 if (refuse_mppe_stateful) {
1117 error("Refusing MPPE stateful mode offered by peer");
1123 /* Find out which of {S,L} are set. */
1124 if ((ho->mppe & MPPE_OPT_128)
1125 && (ho->mppe & MPPE_OPT_40)) {
1126 /* Both are set, negotiate the strongest. */
1128 if (ao->mppe & MPPE_OPT_128)
1129 ho->mppe &= ~MPPE_OPT_40;
1130 else if (ao->mppe & MPPE_OPT_40)
1131 ho->mppe &= ~MPPE_OPT_128;
1136 } else if (ho->mppe & MPPE_OPT_128) {
1137 if (!(ao->mppe & MPPE_OPT_128)) {
1141 } else if (ho->mppe & MPPE_OPT_40) {
1142 if (!(ao->mppe & MPPE_OPT_40)) {
1147 /* Neither are set. */
1148 /* We cannot accept this. */
1150 /* Give the peer our idea of what can be used,
1151 so it can choose and confirm */
1152 ho->mppe = ao->mppe;
1155 /* rebuild the opts */
1156 MPPE_OPTS_TO_CI(ho->mppe, &p[2]);
1157 if (newret == CONFACK) {
1158 u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
1161 BCOPY(p, opt_buf, CILEN_MPPE);
1162 mppe_get_send_key(&opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN);
1163 if (ccp_test(f->unit, opt_buf,
1164 CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) {
1165 /* This shouldn't happen, we've already tested it! */
1166 error("MPPE required, but kernel has no support.");
1167 lcp_close(f->unit, "MPPE required but not available");
1172 * We need to decrease the interface MTU by MPPE_PAD
1173 * because MPPE frames **grow**. The kernel [must]
1174 * allocate MPPE_PAD extra bytes in xmit buffers.
1176 mtu = netif_get_mtu(f->unit);
1178 netif_set_mtu(f->unit, mtu - MPPE_PAD);
1184 * We have accepted MPPE or are willing to negotiate
1185 * MPPE parameters. A CONFREJ is due to subsequent
1186 * (non-MPPE) processing.
1188 rej_for_ci_mppe = 0;
1192 case CI_DEFLATE_DRAFT:
1193 if (!ao->deflate || clen != CILEN_DEFLATE
1194 || (!ao->deflate_correct && type == CI_DEFLATE)
1195 || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) {
1201 ho->deflate_size = nb = DEFLATE_SIZE(p[2]);
1202 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
1203 || p[3] != DEFLATE_CHK_SEQUENCE
1204 || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) {
1207 p[2] = DEFLATE_MAKE_OPT(ao->deflate_size);
1208 p[3] = DEFLATE_CHK_SEQUENCE;
1209 /* fall through to test this #bits below */
1215 * Check whether we can do Deflate with the window
1216 * size they want. If the window is too big, reduce
1217 * it until the kernel can cope and nak with that.
1218 * We only check this for the first option.
1222 res = ccp_test(f->unit, p, CILEN_DEFLATE, 1);
1224 break; /* it's OK now */
1225 if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) {
1227 p[2] = DEFLATE_MAKE_OPT(ho->deflate_size);
1232 p[2] = DEFLATE_MAKE_OPT(nb);
1237 case CI_BSD_COMPRESS:
1238 if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) {
1243 ho->bsd_compress = 1;
1244 ho->bsd_bits = nb = BSD_NBITS(p[2]);
1245 if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION
1246 || nb > ao->bsd_bits || nb < BSD_MIN_BITS) {
1249 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits);
1250 /* fall through to test this #bits below */
1256 * Check whether we can do BSD-Compress with the code
1257 * size they want. If the code size is too big, reduce
1258 * it until the kernel can cope and nak with that.
1259 * We only check this for the first option.
1263 res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 1);
1266 if (res < 0 || nb == BSD_MIN_BITS || dont_nak) {
1268 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION,
1274 p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb);
1279 case CI_PREDICTOR_1:
1280 if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) {
1285 ho->predictor_1 = 1;
1287 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 1) <= 0) {
1292 case CI_PREDICTOR_2:
1293 if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) {
1298 ho->predictor_2 = 1;
1300 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 1) <= 0) {
1310 if (newret == CONFNAK && dont_nak)
1312 if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) {
1313 /* we're returning this option */
1314 if (newret == CONFREJ && ret == CONFNAK)
1318 BCOPY(p, retp, clen);
1326 if (ret != CONFACK) {
1327 if (ret == CONFREJ && *lenp == retp - p0)
1328 all_rejected[f->unit] = 1;
1333 if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) {
1334 error("MPPE required but peer negotiation failed");
1335 lcp_close(f->unit, "MPPE required but peer negotiation failed");
1342 * Make a string name for a compression method (or 2).
1345 method_name(ccp_options *opt, ccp_options *opt2)
1347 static char result[64];
1349 if (!ANY_COMPRESS(*opt))
1351 switch (opt->method) {
1356 char *q = result + sizeof(result); /* 1 past result */
1358 slprintf(p, q - p, "MPPE ");
1360 if (opt->mppe & MPPE_OPT_128) {
1361 slprintf(p, q - p, "128-bit ");
1364 if (opt->mppe & MPPE_OPT_40) {
1365 slprintf(p, q - p, "40-bit ");
1368 if (opt->mppe & MPPE_OPT_STATEFUL)
1369 slprintf(p, q - p, "stateful");
1371 slprintf(p, q - p, "stateless");
1377 case CI_DEFLATE_DRAFT:
1378 if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
1379 slprintf(result, sizeof(result), "Deflate%s (%d/%d)",
1380 (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
1381 opt->deflate_size, opt2->deflate_size);
1383 slprintf(result, sizeof(result), "Deflate%s (%d)",
1384 (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
1387 case CI_BSD_COMPRESS:
1388 if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits)
1389 slprintf(result, sizeof(result), "BSD-Compress (%d/%d)",
1390 opt->bsd_bits, opt2->bsd_bits);
1392 slprintf(result, sizeof(result), "BSD-Compress (%d)",
1395 case CI_PREDICTOR_1:
1396 return "Predictor 1";
1397 case CI_PREDICTOR_2:
1398 return "Predictor 2";
1400 slprintf(result, sizeof(result), "Method %d", opt->method);
1406 * CCP has come up - inform the kernel driver and log a message.
1411 ccp_options *go = &ccp_gotoptions[f->unit];
1412 ccp_options *ho = &ccp_hisoptions[f->unit];
1415 ccp_flags_set(f->unit, 1, 1);
1416 if (ANY_COMPRESS(*go)) {
1417 if (ANY_COMPRESS(*ho)) {
1418 if (go->method == ho->method) {
1419 notice("%s compression enabled", method_name(go, ho));
1421 strlcpy(method1, method_name(go, NULL), sizeof(method1));
1422 notice("%s / %s compression enabled",
1423 method1, method_name(ho, NULL));
1426 notice("%s receive compression enabled", method_name(go, NULL));
1427 } else if (ANY_COMPRESS(*ho))
1428 notice("%s transmit compression enabled", method_name(ho, NULL));
1432 continue_networks(f->unit); /* Bring up IP et al */
1438 * CCP has gone down - inform the kernel driver.
1443 if (ccp_localstate[f->unit] & RACK_PENDING)
1444 UNTIMEOUT(ccp_rack_timeout, f);
1445 ccp_localstate[f->unit] = 0;
1446 ccp_flags_set(f->unit, 1, 0);
1448 if (ccp_gotoptions[f->unit].mppe) {
1449 ccp_gotoptions[f->unit].mppe = 0;
1450 if (lcp_fsm[f->unit].state == OPENED) {
1451 /* If LCP is not already going down, make sure it does. */
1452 error("MPPE disabled");
1453 lcp_close(f->unit, "MPPE disabled");
1460 * Print the contents of a CCP packet.
1462 static char *ccp_codenames[] = {
1463 "ConfReq", "ConfAck", "ConfNak", "ConfRej",
1464 "TermReq", "TermAck", "CodeRej",
1465 NULL, NULL, NULL, NULL, NULL, NULL,
1466 "ResetReq", "ResetAck",
1470 ccp_printpkt(u_char *p, int plen,
1471 void (*printer) (void *, char *, ...), void *arg)
1473 u_char *p0, *optend;
1478 if (plen < HEADERLEN)
1482 len = (p[2] << 8) + p[3];
1483 if (len < HEADERLEN || len > plen)
1486 if (code >= 1 && code <= sizeof(ccp_codenames) / sizeof(char *)
1487 && ccp_codenames[code-1] != NULL)
1488 printer(arg, " %s", ccp_codenames[code-1]);
1490 printer(arg, " code=0x%x", code);
1491 printer(arg, " id=0x%x", id);
1500 /* print list of possible compression methods */
1504 if (optlen < 2 || optlen > len)
1508 optend = p + optlen;
1512 if (optlen >= CILEN_MPPE) {
1515 MPPE_CI_TO_OPTS(&p[2], mppe_opts);
1516 printer(arg, "mppe %s %s %s %s %s %s%s",
1517 (p[2] & MPPE_H_BIT)? "+H": "-H",
1518 (p[5] & MPPE_M_BIT)? "+M": "-M",
1519 (p[5] & MPPE_S_BIT)? "+S": "-S",
1520 (p[5] & MPPE_L_BIT)? "+L": "-L",
1521 (p[5] & MPPE_D_BIT)? "+D": "-D",
1522 (p[5] & MPPE_C_BIT)? "+C": "-C",
1523 (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": "");
1524 if (mppe_opts & MPPE_OPT_UNKNOWN)
1525 printer(arg, " (%.2x %.2x %.2x %.2x)",
1526 p[2], p[3], p[4], p[5]);
1532 case CI_DEFLATE_DRAFT:
1533 if (optlen >= CILEN_DEFLATE) {
1534 printer(arg, "deflate%s %d",
1535 (code == CI_DEFLATE_DRAFT? "(old#)": ""),
1536 DEFLATE_SIZE(p[2]));
1537 if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL)
1538 printer(arg, " method %d", DEFLATE_METHOD(p[2]));
1539 if (p[3] != DEFLATE_CHK_SEQUENCE)
1540 printer(arg, " check %d", p[3]);
1544 case CI_BSD_COMPRESS:
1545 if (optlen >= CILEN_BSD_COMPRESS) {
1546 printer(arg, "bsd v%d %d", BSD_VERSION(p[2]),
1548 p += CILEN_BSD_COMPRESS;
1551 case CI_PREDICTOR_1:
1552 if (optlen >= CILEN_PREDICTOR_1) {
1553 printer(arg, "predictor 1");
1554 p += CILEN_PREDICTOR_1;
1557 case CI_PREDICTOR_2:
1558 if (optlen >= CILEN_PREDICTOR_2) {
1559 printer(arg, "predictor 2");
1560 p += CILEN_PREDICTOR_2;
1565 printer(arg, " %.2x", *p++);
1572 if (len > 0 && *p >= ' ' && *p < 0x7f) {
1573 print_string((char *)p, len, printer, arg);
1580 /* dump out the rest of the packet in hex */
1582 printer(arg, " %.2x", *p++);
1588 * We have received a packet that the decompressor failed to
1589 * decompress. Here we would expect to issue a reset-request, but
1590 * Motorola has a patent on resetting the compressor as a result of
1591 * detecting an error in the decompressed data after decompression.
1592 * (See US patent 5,130,993; international patent publication number
1593 * WO 91/10289; Australian patent 73296/91.)
1595 * So we ask the kernel whether the error was detected after
1596 * decompression; if it was, we take CCP down, thus disabling
1597 * compression :-(, otherwise we issue the reset-request.
1600 ccp_datainput(int unit, u_char *pkt, int len)
1605 if (f->state == OPENED) {
1606 if (ccp_fatal_error(unit)) {
1608 * Disable compression by taking CCP down.
1610 error("Lost compression sync: disabling compression");
1611 ccp_close(unit, "Lost compression sync");
1614 * If we were doing MPPE, we must also take the link down.
1616 if (ccp_gotoptions[unit].mppe) {
1617 error("Too many MPPE errors, closing LCP");
1618 lcp_close(unit, "Too many MPPE errors");
1623 * Send a reset-request to reset the peer's compressor.
1624 * We don't do that if we are still waiting for an
1625 * acknowledgement to a previous reset-request.
1627 if (!(ccp_localstate[f->unit] & RACK_PENDING)) {
1628 fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
1629 TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
1630 ccp_localstate[f->unit] |= RACK_PENDING;
1632 ccp_localstate[f->unit] |= RREQ_REPEAT;
1638 * Timeout waiting for reset-ack.
1641 ccp_rack_timeout(void *arg)
1645 if (f->state == OPENED && ccp_localstate[f->unit] & RREQ_REPEAT) {
1646 fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0);
1647 TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
1648 ccp_localstate[f->unit] &= ~RREQ_REPEAT;
1650 ccp_localstate[f->unit] &= ~RACK_PENDING;