/*
- * Yaboot - secondary boot loader for Linux on PowerPC.
+ * Yaboot - secondary boot loader for Linux on PowerPC.
*
* Copyright (C) 2001, 2002 Ethan Benson
*
* Copyright (C) 1999, 2000, 2001 Benjamin Herrenschmidt
- *
+ *
* IBM CHRP support
- *
+ *
* Copyright (C) 2001 Peter Bergner
*
* portions based on poof
- *
+ *
* Copyright (C) 1999 Marius Vollmer
- *
+ *
* portions based on quik
- *
+ *
* Copyright (C) 1996 Paul Mackerras.
- *
+ *
* Because this program is derived from the corresponding file in the
* silo-0.64 distribution, it is also
- *
+ *
* Copyright (C) 1996 Pete A. Zaitcev
* 1996 Maurizio Plaza
* 1996 David S. Miller
#define CONFIG_FILE_NAME "yaboot.conf"
#define CONFIG_FILE_MAX 0x8000 /* 32k */
+#define MESSAGE_FILE_MAX 2048
+
#ifdef USE_MD5_PASSWORDS
#include "md5.h"
#endif /* USE_MD5_PASSWORDS */
/* Locals & globals */
int useconf = 0;
-char bootdevice[1024];
+char bootdevice[BOOTDEVSZ];
+char bootoncelabel[1024];
+char bootargs[1024];
+char bootlastlabel[BOOTLASTSZ] = {0};
+char fw_nbr_reboots[FW_NBR_REBOOTSZ] = {0};
+long fw_reboot_cnt = 0;
char *password = NULL;
struct boot_fspec_t boot;
int _machine = _MACH_Pmac;
int bgcolor = 0;
#endif /* CONFIG_COLOR_TEXT */
-#if DEBUG
-static int test_bss;
-static int test_data = 0;
-#endif
static int pause_after;
static char *pause_message = "Type go<return> to continue.\n";
static char given_bootargs[1024];
extern char* __bss_start;
extern char* _end;
-static struct first_info *quik_fip = NULL;
-
int
yaboot_start (unsigned long r3, unsigned long r4, unsigned long r5)
{
/* OF seems to do it, but I'm not very confident */
memset(&__bss_start, 0, &_end - &__bss_start);
-
- /* Check for quik first stage bootloader (but I don't think we are
- * compatible with it anyway, I'll look into backporting to older OF
- * versions later
- */
- if (r5 == 0xdeadbeef) {
- r5 = r3;
- quik_fip = (struct first_info *)r4;
- }
/* Initialize OF interface */
prom_init ((prom_entry) r5);
-
+
/* Allocate some memory for malloc'ator */
- malloc_base = prom_claim((void *)MALLOCADDR, MALLOCSIZE, 0);
+ malloc_base = prom_claim_chunk((void *)MALLOCADDR, MALLOCSIZE, 0);
if (malloc_base == (void *)-1) {
prom_printf("Can't claim malloc buffer (%d bytes at 0x%08x)\n",
MALLOCSIZE, MALLOCADDR);
malloc_init(malloc_base, MALLOCSIZE);
DEBUG_F("Malloc buffer allocated at %p (%d bytes)\n",
malloc_base, MALLOCSIZE);
-
+
/* A few useless DEBUG_F's */
DEBUG_F("reloc_offset : %ld (should be 0)\n", reloc_offset());
- DEBUG_F("test_bss : %d (should be 0)\n", test_bss);
- DEBUG_F("test_data : %d (should be 0)\n", test_data);
- DEBUG_F("&test_data : %p\n", &test_data);
- DEBUG_F("&test_bss : %p\n", &test_bss);
DEBUG_F("linked at : 0x%08x\n", TEXTADDR);
/* ask the OF info if we're a chrp or pmac */
root = prom_finddevice("/");
if (root != 0) {
static char model[256];
- if (prom_getprop(root, "device_type", model, 256 ) > 0 &&
+ if (prom_getprop(root, "CODEGEN,vendor", model, 256) > 0 &&
+ !strncmp("bplan", model, 5))
+ _machine = _MACH_bplan;
+ else if (prom_getprop(root, "device_type", model, 256 ) > 0 &&
!strncmp("chrp", model, 4))
_machine = _MACH_chrp;
else {
_machine = _MACH_chrp;
}
}
-
+
DEBUG_F("Running on _machine = %d\n", _machine);
DEBUG_SLEEP;
/* Return to OF */
prom_exit();
-
+
return result;
-
+
}
#ifdef CONFIG_COLOR_TEXT
i++;
}
return -1;
-}
+}
#endif /* CONFIG_COLOR_TEXT */
void print_message_file(char *filename)
{
- char *msg = NULL;
+ char *msg = NULL;
char *p, *endp;
char *defdev = boot.dev;
int defpart = boot.part;
if (p) {
n = simple_strtol(p, &endp, 10);
if (endp != p && *endp == 0)
- defpart = n;
+ defpart = n;
}
strncpy(msgpath, filename, sizeof(msgpath));
+ msgfile = boot; /* Copy all the original paramters */
if (!parse_device_path(msgpath, defdev, defpart, "/etc/yaboot.msg", &msgfile)) {
prom_printf("%s: Unable to parse\n", msgpath);
goto done;
} else
opened = 1;
- msg = malloc(2001);
+ msg = malloc(MESSAGE_FILE_MAX + 1);
if (!msg)
goto done;
else
- memset(msg, 0, 2001);
+ memset(msg, 0, MESSAGE_FILE_MAX + 1);
- if (file.fs->read(&file, 2000, msg) <= 0)
+ if (file.fs->read(&file, MESSAGE_FILE_MAX, msg) <= 0)
goto done;
else
prom_printf("%s", msg);
* config file. Handle the "\\" (blessed system folder)
*/
static int
-load_config_file(char *device, char* path, int partition)
+load_config_file(struct boot_fspec_t *fspec)
{
char *conf_file = NULL, *p;
struct boot_file_t file;
int sz, opened = 0, result = 0;
- char conf_path[512];
- struct boot_fspec_t fspec;
/* Allocate a buffer for the config file */
conf_file = malloc(CONFIG_FILE_MAX);
goto bail;
}
- /* Build the path to the file */
- if (_machine == _MACH_chrp)
- strcpy(conf_path, "/etc/");
- else if (path && *path)
- strcpy(conf_path, path);
- else
- conf_path[0] = 0;
- strcat(conf_path, CONFIG_FILE_NAME);
-
/* Open it */
- fspec.dev = device;
- fspec.file = conf_path;
- fspec.part = partition;
- result = open_file(&fspec, &file);
+ result = open_file(fspec, &file);
if (result != FILE_ERR_OK) {
- prom_printf("%s:%d,", fspec.dev, fspec.part);
- prom_perror(result, fspec.file);
+ prom_printf("%s:%d,", fspec->dev, fspec->part);
+ prom_perror(result, fspec->file);
prom_printf("Can't open config file\n");
goto bail;
}
opened = 0;
/* Call the parsing code in cfg.c */
- if (cfg_parse(conf_path, conf_file, sz) < 0) {
+ if (cfg_parse(fspec->file, conf_file, sz) < 0) {
prom_printf ("Syntax error or read error config\n");
goto bail;
}
+ /*
+ * set the default cf_option to label that has the same MAC addr
+ * it only works if there is a label with the MAC addr on yaboot.conf
+ */
+ if (prom_get_devtype(fspec->dev) == FILE_DEVICE_NET) {
+ /* change the variable bellow to get the MAC dinamicaly */
+ char * macaddr = NULL;
+ int default_mac = 0;
+
+ macaddr = prom_get_mac(prom_get_netinfo());
+ default_mac = cfg_set_default_by_mac(macaddr);
+ if (default_mac >= 1) {
+ prom_printf("Default label was changed to macaddr label.\n");
+ }
+ }
+
DEBUG_F("Config file successfully parsed, %d bytes\n", sz);
/* Now, we do the initialisations stored in the config file */
prom_interpret(p);
password = cfg_get_strg(0, "password");
-
+
#ifdef CONFIG_COLOR_TEXT
p = cfg_get_strg(0, "fgcolor");
if (p) {
}
if (bgcolor >= 0) {
char temp[64];
- sprintf(temp, "%x to background-color", bgcolor);
- prom_interpret(temp);
+ sprintf(temp, "%x to background-color", bgcolor);
+ prom_interpret(temp);
#if !DEBUG
prom_printf("\xc");
#endif /* !DEBUG */
}
if (fgcolor >= 0) {
char temp[64];
- sprintf(temp, "%x to foreground-color", fgcolor);
- prom_interpret(temp);
+ sprintf(temp, "%x to foreground-color", fgcolor);
+ prom_interpret(temp);
}
#endif /* CONFIG_COLOR_TEXT */
-
+
p = cfg_get_strg(0, "init-message");
if (p)
prom_printf("%s\n", p);
print_message_file(p);
result = 1;
-
+
bail:
if (opened)
file.fs->close(&file);
-
+
if (conf_file)
free(conf_file);
-
+
return result;
}
+/*
+ * Search for config file by MAC address, then by IP address.
+ * Basically copying pxelinux's algorithm.
+ * http://syslinux.zytor.com/pxe.php#config
+ */
+static int load_my_config_file(struct boot_fspec_t *orig_fspec)
+{
+ struct bootp_packet *packet;
+ int rc = 0;
+ struct boot_fspec_t fspec = *orig_fspec;
+ char *cfgpath = (_machine == _MACH_chrp || _machine == _MACH_bplan) ? "/etc/" : "";
+ int flen;
+ int minlen;
+
+ packet = prom_get_netinfo();
+ if (!packet)
+ goto out;
+
+ /*
+ * First, try to match on mac address with the hardware type
+ * prepended.
+ */
+
+ /* 3 chars per byte in chaddr + 2 chars for htype + /etc/ +\0 */
+ fspec.file = malloc(packet->hlen * 3 + 2 + 6);
+ if (!fspec.file)
+ goto out;
+
+ sprintf(fspec.file, "%s%02x-", cfgpath, packet->htype);
+ strcat(fspec.file, prom_get_mac(packet));
+
+ rc = load_config_file(&fspec);
+ if (rc)
+ goto out;
+
+ /*
+ * Now try to match on IP.
+ */
+ /* no need to realloc for /etc/ + 8 chars in yiaddr + \0 */
+ sprintf(fspec.file, "%s%s", cfgpath, prom_get_ip(packet));
+
+ for (flen = strlen(fspec.file),
+ minlen = strlen(cfgpath); flen > minlen; flen--) {
+ rc = load_config_file(&fspec);
+ if (rc)
+ goto out;
+ /* Chop one digit off the end, try again */
+ fspec.file[flen - 1] = '\0';
+ }
+
+ out:
+ if (rc) /* modify original only on success */
+ orig_fspec->file = fspec.file;
+ else
+ free(fspec.file);
+ return rc;
+}
+
void maintabfunc (void)
{
if (useconf) {
if (!strncmp (password, "$1$", 3)) {
if (!check_md5_password(passwdbuff, password))
return;
- }
+ }
else if (!strcmp (password, passwdbuff))
return;
#else /* !MD5 */
{
int defpart;
char *defdevice = 0;
+ char defdevice_bak[1024];
char *p, *q, *endp;
int c, n;
char *imagename = 0, *label;
int singlekey = 0;
int restricted = 0;
static int first = 1;
- static char bootargs[1024];
static char imagepath[1024];
static char initrdpath[1024];
- static char sysmappath[1024];
+ static char manualinitrd[1024];
+ static int definitrd = 1, hasarg = 0;
pause_after = 0;
memset(params, 0, sizeof(*params));
params->args = "";
params->kernel.part = -1;
params->rd.part = -1;
- params->sysmap.part = -1;
defpart = boot.part;
-
+
cmdinit();
- if (first) {
+ if (first && !fw_reboot_cnt) {
first = 0;
- prom_get_chosen("bootargs", bootargs, sizeof(bootargs));
imagename = bootargs;
word_split(&imagename, ¶ms->args);
timeout = DEFAULT_TIMEOUT;
timeout = simple_strtol(q, NULL, 0);
}
+ /* If this is a reboot due to FW detecting CAS changes then
+ * set timeout to 1. The last kernel booted will be booted
+ * again automatically. It should seem seamless to the user
+ */
+ if (fw_reboot_cnt)
+ timeout = 1;
+
prom_printf("boot: ");
c = -1;
if (timeout != -1) {
}
if (c == '\n' || c == '\r') {
- if (!imagename)
- imagename = cfg_get_default();
+ if (!imagename) {
+ if (bootoncelabel[0] != 0)
+ imagename = bootoncelabel;
+ else if (bootlastlabel[0] != 0)
+ imagename = bootlastlabel;
+ else
+ imagename = cfg_get_default();
+ }
if (imagename)
prom_printf("%s", imagename);
if (params->args)
word_split(&imagename, ¶ms->args);
}
+ /* initrd setup via cmd console */
+ /* first, check if the user uses it with some label */
+ if (!strncmp(params->args, "initrd=", 7)) {
+ DEBUG_F("params->args: %s\n", params->args);
+ definitrd = 0;
+ }
+ /* after, check if there is the 'initrd=' in the imagename string */
+ if (!strncmp(imagename, "initrd=", 7) || !definitrd) {
+
+ /* return the value of definitrd to 1 */
+ if (!definitrd)
+ definitrd = 1;
+
+ /* args = "initrd=blah" */
+ char *args = NULL;
+
+ if (params->args) {
+ args = params->args;
+ params->args = NULL;
+ hasarg = 1;
+ } else
+ args = imagename;
+
+ if (strlen(args)){
+ /* copy the string after the '=' to manualinitrd */
+ strcpy(manualinitrd, args+7);
+ definitrd = 0;
+ prom_printf("New initrd file specified: %s\n", manualinitrd);
+ } else {
+ prom_printf("ERROR: no initrd specified!\n");
+ return 0;
+ }
+
+ /* set imagename with the default values of the config file */
+ if ((prom_get_devtype(boot.dev) == FILE_DEVICE_NET) && !hasarg)
+ imagename = cfg_get_default();
+ else
+ imagename = cfg_get_default();
+ }
+
/* chrp gets this wrong, force it -- Cort */
if ( useconf && (!imagename || imagename[0] == 0 ))
imagename = cfg_get_default();
+ /* write the imagename out so it can be reused on reboot if necessary */
+ prom_set_options("boot-last-label", imagename, strlen(imagename));
+
label = 0;
defdevice = boot.dev;
+ strcpy(defdevice_bak,defdevice);
+
if (useconf) {
defdevice = cfg_get_strg(0, "device");
p = cfg_get_strg(0, "partition");
"resides on, and \"partno\" is the partition number the image resides on.\n"
"Note that the comma (,) is only required if you specify an OpenFirmware\n"
"device, if you only specify a filename you should not start it with a \",\"\n\n"
- "If you omit \"device:\" and \"partno\" yaboot will use the values of \n"
- "\"device=\" and \"partition=\" in yaboot.conf, right now those are set to: \n"
- "device=%s\n"
- "partition=%d\n\n", defdevice, defpart);
+ "To boot a alternative initrd file rather than specified in the yaboot\n"
+ "configuration file, use the \"initrd\" command on Yaboot's prompt: \n"
+ "\"initrd=[name.img]\". This will load the \"name.img\" file after the default\n"
+ "kernel image. You can, also, specify a different initrd file to any other\n"
+ "label of the yaboot configuration file. Just type \"label initrd=[name.img]\"\n"
+ "and the specified initrd file will be loaded.\n\n"
+ "To load an alternative config file rather than /etc/yaboot.conf, enter\n"
+ "its device, partno and path, on Open Firmware Prompt:\n"
+ "boot conf=device:partno,/path/to/configfile\n."
+ "To reload the config file or load a new one, use the \"conf\" command\n"
+ "on Yaboot's prompt:\n"
+ "conf [device=device] [partition=partno] [file=/path/to/configfile]\n\n"
+ "If you omit \"device\" and \"partno\", Yaboot will use their current\n"
+ "values. You can check them by entering \"conf\" on Yaboot's prompt.\n");
+
return 0;
}
check_password ("Restricted command.");
return 1;
}
- return 1;
+ return 1;
+ }
+
+ if (!strncmp (imagename, "conf", 4)) {
+
+ // imagename = "conf file=blah dev=bleh part=blih"
+ DEBUG_F("Loading user-specified config file: %s\n",imagename);
+ if (password) {
+ check_password ("Restricted command.");
+ return 1;
+ }
+
+ // args= "file=blah dev=bleh part=blih"
+ char *args = params->args;
+
+ if (strlen(args)){
+
+ // set a pointer to the first space in args
+ char *space = strchr(args,' ');
+
+ int loop = 3;
+ while (loop > 0){
+ char temp[1024] = "0";
+
+ // copy next argument to temp
+ strncpy(temp, args, space-args);
+
+ // parse temp and set boot arguments
+ if (!strncmp (temp, "file=", 5)){
+ DEBUG_F("conf file: %s\n", temp+5);
+ strcpy(boot.file, temp+5);
+ } else if (!strncmp (temp, "device=", 7)){
+ DEBUG_F("conf device: %s\n", temp+7);
+ strcpy(boot.dev, temp+7);
+ } else if (!strncmp (temp, "partition=", 10)){
+ DEBUG_F("conf partition: %s\n", temp+10);
+ boot.part=simple_strtol(temp+10,NULL,10);
+ } else
+ space = NULL;
+
+ // set the pointer to the next space in args;
+ // set the loop control variable
+ if (strlen(space)>1){
+ // Go to the next argument
+ args = space+1;
+
+ loop--;
+ if (strchr(args,' ') == NULL)
+ space = &args[strlen(args)];
+ else
+ space = strchr(args,' ');
+ } else {
+ loop = -1;
+ space = NULL;
+ }
+ }
+
+ prom_printf("Loading config file...\n");
+ useconf = load_config_file(&boot);
+ if (useconf > 0){
+ if ((q = cfg_get_strg(0, "timeout")) != 0 && *q != 0)
+ timeout = simple_strtol(q, NULL, 0);
+ } else {
+ prom_printf("Restoring default values.\n");
+ strcpy(boot.file,"");
+ strcpy(boot.dev, defdevice_bak);
+ boot.part = defpart;
+ }
+
+ } else {
+ prom_printf("Current configuration:\n");
+ prom_printf("device: %s\n", boot.dev);
+ if (boot.part < 0)
+ prom_printf("partition: auto\n");
+ else
+ prom_printf("partition: %d\n", boot.part);
+ if (strlen(boot.file))
+ prom_printf("file: %s\n", boot.file);
+ else
+ prom_printf("file: /etc/%s\n",CONFIG_FILE_NAME);
+ }
+
+ imagename = "\0";
+ params->args = "\0";
+
+ return 0;
}
if (imagename[0] == '$') {
if (!label && password)
check_password ("To boot a custom image you must enter the password.");
+ params->kernel = boot; /* Copy all the original paramters */
if (!parse_device_path(imagepath, defdevice, defpart,
"/vmlinux", ¶ms->kernel)) {
prom_printf("%s: Unable to parse\n", imagepath);
return 0;
}
- DEBUG_F("after parse_device_path: dev=%s part=%d file=%s\n", params->kernel.dev,
- params->kernel.part, params->kernel.file);
-
+ DEBUG_F("after parse_device_path: dev=%s part=%d file=%s\n", params->kernel.dev, params->kernel.part, params->kernel.file);
if (useconf) {
p = cfg_get_strg(label, "initrd");
if (p && *p) {
- DEBUG_F("Parsing initrd path <%s>\n", p);
- strncpy(initrdpath, p, 1024);
+
+ /* check if user seted to use a initrd file from boot console */
+ if (!definitrd && p != manualinitrd) {
+ if (manualinitrd[0] != '/' && (prom_get_devtype(defdevice_bak) != FILE_DEVICE_NET)) {
+ strcpy(initrdpath, "/");
+ strcat(initrdpath, manualinitrd);
+ } else
+ strncpy(initrdpath, manualinitrd, 1024);
+ } else
+ strncpy(initrdpath, p, 1024);
+
+ DEBUG_F("Parsing initrd path <%s>\n", initrdpath);
+ params->rd = boot; /* Copy all the original paramters */
if (!parse_device_path(initrdpath, defdevice, defpart,
"/root.bin", ¶ms->rd)) {
prom_printf("%s: Unable to parse\n", imagepath);
return 0;
}
}
- p = cfg_get_strg(label, "sysmap");
- if (p && *p) {
- DEBUG_F("Parsing sysmap path <%s>\n", p);
- strncpy(sysmappath, p, 1024);
- if (!parse_device_path(sysmappath, defdevice, defpart,
- "/boot/System.map", ¶ms->sysmap)) {
- prom_printf("%s: Unable to parse\n", imagepath);
- return 0;
- }
- }
}
return 0;
}
void
yaboot_text_ui(void)
{
-#define MAX_HEADERS 32
-
struct boot_file_t file;
int result;
static struct boot_param_t params;
void *initrd_base;
unsigned long initrd_size;
- void *sysmap_base;
- unsigned long sysmap_size;
kernel_entry_t kernel_entry;
- struct bi_record* birec;
char* loc=NULL;
loadinfo_t loadinfo;
void *initrd_more,*initrd_want;
unsigned long initrd_read;
-
+
loadinfo.load_loc = 0;
for (;;) {
initrd_size = 0;
initrd_base = 0;
- sysmap_base = 0;
- sysmap_size = 0;
-
+
if (get_params(¶ms))
return;
if (!params.kernel.file)
continue;
-
+
prom_printf("Please wait, loading kernel...\n");
memset(&file, 0, sizeof(file));
file.fs->close(&file);
memset(&file, 0, sizeof(file));
- /* If sysmap, load it (only if booting a vmlinux).
- */
- if (flat_vmlinux && params.sysmap.file) {
- prom_printf("Loading System.map ...\n");
- if(strlen(boot.file) && !strcmp(boot.file,"\\\\") && params.sysmap.file[0] != '/'
- && params.sysmap.file[0] != '\\') {
- if (loc) free(loc);
- loc=(char*)malloc(strlen(params.sysmap.file)+3);
- if (!loc) {
- prom_printf ("malloc error\n");
- goto next;
- }
- strcpy(loc,boot.file);
- strcat(loc,params.sysmap.file);
- free(params.sysmap.file);
- params.sysmap.file=loc;
- }
-
- result = open_file(¶ms.sysmap, &file);
- if (result != FILE_ERR_OK) {
- prom_printf("%s:%d,", params.sysmap.dev, params.sysmap.part);
- prom_perror(result, params.sysmap.file);
- }
- else {
- sysmap_base = prom_claim(loadinfo.base+loadinfo.memsize, 0x100000, 0);
- if (sysmap_base == (void *)-1) {
- prom_printf("Claim failed for sysmap memory\n");
- sysmap_base = 0;
- } else {
- sysmap_size = file.fs->read(&file, 0xfffff, sysmap_base);
- if (sysmap_size == 0)
- sysmap_base = 0;
- else
- ((char *)sysmap_base)[sysmap_size++] = 0;
- }
- file.fs->close(&file);
- memset(&file, 0, sizeof(file));
- }
- if (sysmap_base) {
- prom_printf("System.map loaded at %p, size: %lu Kbytes\n",
- sysmap_base, sysmap_size >> 10);
- loadinfo.memsize += _ALIGN(0x100000, 0x1000);
- } else {
- prom_printf("System.map load failed !\n");
- prom_pause();
- }
- }
-
/* If ramdisk, load it (only if booting a vmlinux). For now, we
* can't tell the size it will be so we claim an arbitrary amount
* of 4Mb.
prom_perror(result, params.rd.file);
}
else {
-#define INITRD_CHUNKSIZE 0x400000
+#define INITRD_CHUNKSIZE 0x100000
initrd_base = prom_claim(loadinfo.base+loadinfo.memsize, INITRD_CHUNKSIZE, 0);
if (initrd_base == (void *)-1) {
prom_printf("Claim failed for initrd memory\n");
initrd_more = prom_claim(initrd_want, INITRD_CHUNKSIZE, 0);
if (initrd_more != initrd_want) {
prom_printf("Claim failed for initrd memory at %p rc=%p\n",initrd_want,initrd_more);
+ prom_pause();
break;
}
initrd_read = file.fs->read(&file, INITRD_CHUNKSIZE, initrd_more);
flush_icache_range ((long)loadinfo.base, (long)loadinfo.base+loadinfo.memsize);
DEBUG_F(" done\n");
- if (flat_vmlinux) {
- /*
- * Fill new boot infos (only if booting a vmlinux).
- *
- * The birec is low on memory, probably inside the malloc pool,
- * so we don't write it earlier. At this point, we should not
- * use anything coming from the malloc pool.
- */
- birec = (struct bi_record *)_ALIGN(loadinfo.filesize+(1<<20)-1,(1<<20));
-
- /* We make sure it's mapped. We map only 64k for now, it's
- * plenty enough we don't claim since this precise memory
- * range may already be claimed by the malloc pool.
- */
- prom_map (birec, birec, 0x10000);
- DEBUG_F("birec at %p\n", birec);
- DEBUG_SLEEP;
-
- birec->tag = BI_FIRST;
- birec->size = sizeof(struct bi_record);
- birec = (struct bi_record *)((ulong)birec + birec->size);
-
- birec->tag = BI_BOOTLOADER_ID;
- sprintf( (char *)birec->data, "yaboot");
- birec->size = sizeof(struct bi_record) + strlen("yaboot") + 1;
- birec = (struct bi_record *)((ulong)birec + birec->size);
-
- birec->tag = BI_MACHTYPE;
- birec->data[0] = _machine;
- birec->size = sizeof(struct bi_record) + sizeof(ulong);
- birec = (struct bi_record *)((ulong)birec + birec->size);
-
- if (sysmap_base) {
- birec->tag = BI_SYSMAP;
- birec->data[0] = (ulong)sysmap_base;
- birec->data[1] = sysmap_size;
- birec->size = sizeof(struct bi_record) + sizeof(ulong)*2;
- birec = (struct bi_record *)((ulong)birec + birec->size);
- }
- birec->tag = BI_LAST;
- birec->size = sizeof(struct bi_record);
- birec = (struct bi_record *)((ulong)birec + birec->size);
- }
-
/* compute the kernel's entry point. */
kernel_entry = loadinfo.base + loadinfo.entry - loadinfo.load_loc;
Elf32_Ehdr *e = &(loadinfo->elf.elf32hdr);
Elf32_Phdr *p, *ph;
int size = sizeof(Elf32_Ehdr) - sizeof(Elf_Ident);
- unsigned long addr, loadaddr;
+ unsigned long loadaddr;
/* Read the rest of the Elf header... */
if ((*(file->fs->read))(file, size, &e->e_version) < size) {
loadinfo->entry = e->e_entry;
- if (e->e_phnum > MAX_HEADERS) {
- prom_printf ("Can only load kernels with one program header\n");
- goto bail;
- }
-
ph = (Elf32_Phdr *)malloc(sizeof(Elf32_Phdr) * e->e_phnum);
if (!ph) {
prom_printf ("Malloc error\n");
loadaddr = KERNELADDR;
} else {
flat_vmlinux = 0;
- loadaddr = e->e_entry;
+ loadaddr = loadinfo->load_loc;
}
- /* On some systems, loadaddr may already be claimed, so try some
- * other nearby addresses before giving up.
- */
- for(addr=loadaddr; addr <= loadaddr * 8 ;addr+=0x100000) {
- loadinfo->base = prom_claim((void *)addr, loadinfo->memsize, 0);
- if (loadinfo->base != (void *)-1) break;
- }
+ loadinfo->base = prom_claim_chunk((void *)loadaddr, loadinfo->memsize, 0);
if (loadinfo->base == (void *)-1) {
prom_printf("Claim error, can't allocate kernel memory\n");
goto bail;
- }
+ }
DEBUG_F("After ELF parsing, load base: %p, mem_sz: 0x%08lx\n",
loadinfo->base, loadinfo->memsize);
}
free(ph);
-
+
/* Return success at loading the Elf32 kernel */
return 1;
Elf64_Ehdr *e = &(loadinfo->elf.elf64hdr);
Elf64_Phdr *p, *ph;
int size = sizeof(Elf64_Ehdr) - sizeof(Elf_Ident);
- unsigned long addr, loadaddr;
+ unsigned long loadaddr;
/* Read the rest of the Elf header... */
if ((*(file->fs->read))(file, size, &e->e_version) < size) {
loadinfo->entry = e->e_entry;
- if (e->e_phnum > MAX_HEADERS) {
- prom_printf ("Can only load kernels with one program header\n");
- goto bail;
- }
-
ph = (Elf64_Phdr *)malloc(sizeof(Elf64_Phdr) * e->e_phnum);
if (!ph) {
prom_printf ("Malloc error\n");
goto bail;
}
- /* leave some room (1Mb) for boot infos */
- loadinfo->memsize = _ALIGN(loadinfo->memsize,(1<<20)) + 0x100000;
+ loadinfo->memsize = _ALIGN(loadinfo->memsize,(1<<20));
/* Claim OF memory */
DEBUG_F("Before prom_claim, mem_sz: 0x%08lx\n", loadinfo->memsize);
loadaddr = e->e_entry;
}
- /* On some systems, loadaddr may already be claimed, so try some
- * other nearby addresses before giving up.
- */
- for(addr=loadaddr; addr <= loadaddr * 8 ;addr+=0x100000) {
- loadinfo->base = prom_claim((void *)addr, loadinfo->memsize, 0);
- if (loadinfo->base != (void *)-1) break;
- }
+ loadinfo->base = prom_claim_chunk((void *)loadaddr, loadinfo->memsize, 0);
if (loadinfo->base == (void *)-1) {
prom_printf("Claim error, can't allocate kernel memory\n");
goto bail;
- }
+ }
DEBUG_F("After ELF parsing, load base: %p, mem_sz: 0x%08lx\n",
loadinfo->base, loadinfo->memsize);
}
free(ph);
-
+
/* Return success at loading the Elf64 kernel */
return 1;
e->e_ident[EI_MAG3] == ELFMAG3 &&
e->e_ident[EI_CLASS] == ELFCLASS64 &&
e->e_ident[EI_DATA] == ELFDATA2MSB &&
- e->e_type == ET_EXEC &&
+ (e->e_type == ET_EXEC || e->e_type == ET_DYN) &&
e->e_machine == EM_PPC64);
}
DEBUG_F("Open screen result: %p\n", scrn);
}
}
-
+
if (scrn == PROM_INVALID_HANDLE) {
- prom_printf("No screen device found !/n");
+ prom_printf("No screen device found !\n");
return;
}
for(i=0;i<16;i++) {
prom_set_color(scrn, i, default_colors[i*3],
default_colors[i*3+1], default_colors[i*3+2]);
}
- prom_printf("\x1b[1;37m\x1b[2;40m");
+ prom_printf("\x1b[1;37m\x1b[2;40m");
#ifdef COLOR_TEST
for (i=0;i<16; i++) {
prom_printf("\x1b[%d;%dm\x1b[1;47m%s \x1b[2;40m %s\n",
ansi_color_table[i].name,
ansi_color_table[i].name);
}
- prom_printf("\x1b[1;37m\x1b[2;40m");
+ prom_printf("\x1b[1;37m\x1b[2;40m");
#endif /* COLOR_TEST */
#if !DEBUG
yaboot_main(void)
{
char *ptype;
+ char *endp;
+ int conf_given = 0;
+ char conf_path[1024];
if (_machine == _MACH_Pmac)
setup_display();
-
- prom_get_chosen("bootpath", bootdevice, sizeof(bootdevice));
+
+ prom_get_chosen("bootargs", bootargs, sizeof(bootargs));
+ DEBUG_F("/chosen/bootargs = %s\n", bootargs);
+ prom_get_chosen("bootpath", bootdevice, BOOTDEVSZ);
DEBUG_F("/chosen/bootpath = %s\n", bootdevice);
+ if (prom_get_options("ibm,client-architecture-support-reboot",fw_nbr_reboots, FW_NBR_REBOOTSZ) == -1 )
+ prom_get_options("ibm,fw-nbr-reboots",fw_nbr_reboots, FW_NBR_REBOOTSZ);
+ fw_reboot_cnt = simple_strtol(fw_nbr_reboots,&endp,10);
+ if (fw_reboot_cnt > 0L)
+ prom_get_options("boot-last-label", bootlastlabel, BOOTLASTSZ);
+
+ /* If conf= specified on command line, it overrides
+ Usage: conf=device:partition,/path/to/conffile
+ Example: On Open Firmware Prompt, type
+ boot conf=/pci@8000000f8000000/pci@1/pci1014,028C@1/scsi@0/sd@1,0:3,/etc/yaboot.conf */
+
+ if (!strncmp(bootargs, "conf=", 5)) {
+ DEBUG_F("Using conf argument in Open Firmware\n");
+ char *end = strchr(bootargs,' ');
+ if (end)
+ *end = 0;
+
+ strcpy(bootdevice, bootargs + 5);
+ conf_given = 1;
+ DEBUG_F("Using conf=%s\n", bootdevice);
+
+ /* Remove conf=xxx from bootargs */
+ if (end)
+ memmove(bootargs, end+1, strlen(end+1)+1);
+ else
+ bootargs[0] = 0;
+ }
if (bootdevice[0] == 0) {
- prom_get_options("boot-device", bootdevice, sizeof(bootdevice));
+ prom_get_options("boot-device", bootdevice, BOOTDEVSZ);
DEBUG_F("boot-device = %s\n", bootdevice);
}
if (bootdevice[0] == 0) {
return -1;
}
+ if (bootoncelabel[0] == 0) {
+ prom_get_options("boot-once", bootoncelabel,
+ sizeof(bootoncelabel));
+ if (bootoncelabel[0] != 0)
+ DEBUG_F("boot-once: [%s]\n", bootoncelabel);
+ }
+ prom_set_options("boot-once", NULL, 0);
+
if (!parse_device_path(bootdevice, NULL, -1, "", &boot)) {
prom_printf("%s: Unable to parse\n", bootdevice);
return -1;
}
+ if (_machine == _MACH_bplan && !conf_given)
+ boot.part++;
DEBUG_F("After parse_device_path: dev=%s, part=%d, file=%s\n",
boot.dev, boot.part, boot.file);
- if (strlen(boot.file)) {
- if (!strncmp(boot.file, "\\\\", 2))
- boot.file = "\\\\";
- else {
- char *p, *last;
- p = last = boot.file;
- while(*p) {
- if (*p == '\\')
- last = p;
- p++;
- }
- if (p)
- *(last) = 0;
- else
- boot.file = "";
- if (strlen(boot.file))
- strcat(boot.file, "\\");
- }
+ if (!conf_given) {
+ if (_machine == _MACH_chrp || _machine == _MACH_bplan)
+ boot.file = "/etc/";
+ else if (strlen(boot.file)) {
+ if (!strncmp(boot.file, "\\\\", 2))
+ boot.file = "\\\\";
+ else {
+ char *p, *last;
+ p = last = boot.file;
+ while(*p) {
+ if (*p == '\\')
+ last = p;
+ p++;
+ }
+ if (p)
+ *(last) = 0;
+ else
+ boot.file = "";
+ if (strlen(boot.file))
+ strcat(boot.file, "\\");
+ }
+ }
+ strcpy(conf_path, boot.file);
+ strcat(conf_path, CONFIG_FILE_NAME);
+ boot.file = conf_path;
+ DEBUG_F("After path kludgeup: dev=%s, part=%d, file=%s\n",
+ boot.dev, boot.part, boot.file);
+ }
+
+ /*
+ * If we're doing a netboot, first look for one which matches our
+ * MAC address.
+ */
+ if (prom_get_devtype(boot.dev) == FILE_DEVICE_NET) {
+ prom_printf("Try to netboot\n");
+ useconf = load_my_config_file(&boot);
}
- DEBUG_F("After pmac path kludgeup: dev=%s, part=%d, file=%s\n",
- boot.dev, boot.part, boot.file);
- useconf = load_config_file(boot.dev, boot.file, boot.part);
+ if (!useconf)
+ useconf = load_config_file(&boot);
prom_printf("Welcome to yaboot version " VERSION "\n");
prom_printf("Enter \"help\" to get some basic usage information\n");
return 0;
}
-/*
+/*
* Local variables:
* c-file-style: "k&r"
* c-basic-offset: 5
projects / yaboot.git / blobdiff