X-Git-Url: http://git.ozlabs.org/?p=ppp.git;a=blobdiff_plain;f=include%2Flinux%2Fppp-comp.h;h=091a57539578e313113d550991e5fa5b4b97e6e0;hp=92aa64572433c5c2cb3cff38162f566f8c143ed3;hb=b38527fb14af5ebe3d2559e2f861575c722a1ce9;hpb=2ddcabd59d372be3f66c42ed9df15ca7a474ac2a

diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index 92aa645..091a575 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -24,11 +24,11 @@
  * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
  * OR MODIFICATIONS.
  *
- * $Id: ppp-comp.h,v 1.8 1999/07/23 06:53:40 paulus Exp $
+ * $Id: ppp-comp.h,v 1.9 2002/04/02 13:54:59 dfs Exp $
  */
 
 /*
- *  ==FILEVERSION 980319==
+ *  ==FILEVERSION 20020319==
  *
  *  NOTE TO MAINTAINERS:
  *     If you modify this file at all, please set the above date.
@@ -186,6 +186,100 @@ struct compressor {
 				 + DEFLATE_METHOD_VAL)
 #define DEFLATE_CHK_SEQUENCE	0
 
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE			18	/* config option for MPPE */
+#define CILEN_MPPE		6	/* length of config option */
+
+#define MPPE_PAD		4	/* MPPE growth per frame */
+#define MPPE_MAX_KEY_LEN	16	/* largest key length (128-bit) */
+
+/* option bits for ccp_options.mppe */
+#define MPPE_OPT_40		0x01	/* 40 bit */
+#define MPPE_OPT_128		0x02	/* 128 bit */
+#define MPPE_OPT_STATEFUL	0x04	/* stateful mode */
+/* unsupported opts */
+#define MPPE_OPT_56		0x08	/* 56 bit */
+#define MPPE_OPT_MPPC		0x10	/* MPPC compression */
+#define MPPE_OPT_D		0x20	/* Unknown */
+#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
+#define MPPE_OPT_UNKNOWN	0x40	/* Bits !defined in RFC 3078 were set */
+
+/*
+ * This is not nice ... the alternative is a bitfield struct though.
+ * And unfortunately, we cannot share the same bits for the option
+ * names above since C and H are the same bit.  We could do a u_int32
+ * but then we have to do a htonl() all the time and/or we still need
+ * to know which octet is which.
+ */
+#define MPPE_C_BIT		0x01	/* MPPC */
+#define MPPE_D_BIT		0x10	/* Obsolete, usage unknown */
+#define MPPE_L_BIT		0x20	/* 40-bit */
+#define MPPE_S_BIT		0x40	/* 128-bit */
+#define MPPE_M_BIT		0x80	/* 56-bit, not supported */
+#define MPPE_H_BIT		0x01	/* Stateless (in a different byte) */
+
+/* Does not include H bit; used for least significant octet only. */
+#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
+
+/* Build a CI from mppe opts (see RFC 3078) */
+#define MPPE_OPTS_TO_CI(opts, ci)		\
+    do {					\
+	u_char *ptr = ci; /* u_char[4] */	\
+						\
+	/* H bit */				\
+	if (opts & MPPE_OPT_STATEFUL)		\
+	    *ptr++ = 0x0;			\
+	else					\
+	    *ptr++ = MPPE_H_BIT;		\
+	*ptr++ = 0;				\
+	*ptr++ = 0;				\
+						\
+	/* S,L bits */				\
+	*ptr = 0;				\
+	if (opts & MPPE_OPT_128)		\
+	    *ptr |= MPPE_S_BIT;			\
+	if (opts & MPPE_OPT_40)			\
+	    *ptr |= MPPE_L_BIT;			\
+	/* M,D,C bits not supported */		\
+    } while (/* CONSTCOND */ 0)
+
+/* The reverse of the above */
+#define MPPE_CI_TO_OPTS(ci, opts)		\
+    do {					\
+	u_char *ptr = ci; /* u_char[4] */	\
+						\
+	opts = 0;				\
+						\
+	/* H bit */				\
+	if (!(ptr[0] & MPPE_H_BIT))		\
+	    opts |= MPPE_OPT_STATEFUL;		\
+						\
+	/* S,L bits */				\
+	if (ptr[3] & MPPE_S_BIT)		\
+	    opts |= MPPE_OPT_128;		\
+	if (ptr[3] & MPPE_L_BIT)		\
+	    opts |= MPPE_OPT_40;		\
+						\
+	/* M,D,C bits */			\
+	if (ptr[3] & MPPE_M_BIT)		\
+	    opts |= MPPE_OPT_56;		\
+	if (ptr[3] & MPPE_D_BIT)		\
+	    opts |= MPPE_OPT_D;			\
+	if (ptr[3] & MPPE_C_BIT)		\
+	    opts |= MPPE_OPT_MPPC;		\
+						\
+	/* Other bits */			\
+	if (ptr[0] & ~MPPE_H_BIT)		\
+	    opts |= MPPE_OPT_UNKNOWN;		\
+	if (ptr[1] || ptr[2])			\
+	    opts |= MPPE_OPT_UNKNOWN;		\
+	if (ptr[3] & ~MPPE_ALL_BITS)		\
+	    opts |= MPPE_OPT_UNKNOWN;		\
+    } while (/* CONSTCOND */ 0)
+
 /*
  * Definitions for other, as yet unsupported, compression methods.
  */